diff options
| author | Tom Rini <trini@konsulko.com> | 2022-06-06 12:09:41 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2022-06-06 12:09:41 -0400 |
| commit | 8bbbd6337361cadad96b163bde4ae675752b7778 (patch) | |
| tree | 82e207c8b1a509d069177fb4489b1dfcba467b15 | |
| parent | 8f527342db4160a1f030de6fe4a1591787cce65a (diff) | |
| parent | 4151f4f822bb075c05e3407d184dfd018723724d (diff) | |
| download | u-boot-8bbbd6337361cadad96b163bde4ae675752b7778.tar.gz | |
Merge branch '2022-06-06-finish-SPL-Kconfig-migration' into next
- Bring in a number of series of patches that migrate all remaining
CONFIG_SPL symbols to Kconfig, remove some dead code that this
uncovered and then start to tighten the dependencies in Kconfig now
that everything is migrated and these relationships can be clearly
expressed.
1740 files changed, 7693 insertions, 8110 deletions
@@ -228,12 +228,38 @@ config SYS_BOOT_GET_CMDLINE Enables allocating and saving kernel cmdline in space between "bootm_low" and "bootm_low" + BOOTMAPSZ. +config SYS_BARGSIZE + int "Size of kernel command line buffer in bytes" + depends on SYS_BOOT_GET_CMDLINE + default 512 + help + Buffer size for Boot Arguments which are passed to the application + (usually a Linux kernel) when it is booted + config SYS_BOOT_GET_KBD bool "Enable kernel board information setup" help Enables allocating and saving a kernel copy of the bd_info in space between "bootm_low" and "bootm_low" + BOOTMAPSZ. +config HAS_CUSTOM_SYS_INIT_SP_ADDR + bool "Use a custom location for the initial stack pointer address" + depends on ARC || (ARM && !INIT_SP_RELATIVE) || MIPS || PPC || RISCV + default y if TFABOOT + help + Typically, we use an initial stack pointer address that is calculated + by taking the statically defined CONFIG_SYS_INIT_RAM_ADDR, adding the + statically defined CONFIG_SYS_INIT_RAM_SIZE and then subtracting the + build-time constant of GENERATED_GBL_DATA_SIZE. On MIPS a different + but statica calculation is performed. However, some platforms will + take a different approach. Say Y here to define the address statically + instead. + +config CUSTOM_SYS_INIT_SP_ADDR + hex "Static location for the initial stack pointer" + depends on HAS_CUSTOM_SYS_INIT_SP_ADDR + default SYS_TEXT_BASE if TFABOOT + config SYS_MALLOC_F bool "Enable malloc() pool before relocation" default y if DM @@ -293,33 +293,6 @@ board_init_r(): SPL-specific notes: - stack is optionally in SDRAM, if CONFIG_SPL_STACK_R is defined and - CONFIG_SPL_STACK_R_ADDR points into SDRAM - - preloader_console_init() can be called here - typically this is - done by selecting CONFIG_SPL_BOARD_INIT and then supplying a - spl_board_init() function containing this call - - loads U-Boot or (in falcon mode) Linux - - -Configuration Options: ----------------------- - -Configuration depends on the combination of board and CPU type; all -such information is kept in a configuration file -"include/configs/<board_name>.h". - -Example: For a TQM823L module, all configuration settings are in -"include/configs/TQM823L.h". - - -Many of the options are named exactly as the corresponding Linux -kernel configuration options. The intention is to make it easier to -build a config tool - later. - -- ARM Platform Bus Type(CCI): - CoreLink Cache Coherent Interconnect (CCI) is ARM BUS which - provides full cache coherency between two clusters of multi-core - CPUs and I/O coherency for devices and I/O masters - CONFIG_SYS_FSL_HAS_CCI400 Defined For SoC that has cache coherent interconnect @@ -493,12 +466,6 @@ The following options need to be configured: Defines the SEC controller register space as Little Endian - MIPS CPU options: - CONFIG_SYS_INIT_SP_OFFSET - - Offset relative to CONFIG_SYS_SDRAM_BASE for initial stack - pointer. This is needed for the temporary stack before - relocation. - CONFIG_XWAY_SWAP_BYTES Enable compilation of tools/xway-swap-bytes needed for Lantiq @@ -1658,36 +1625,6 @@ The following options need to be configured: CONFIG_SPL Enable building of SPL globally. - CONFIG_SPL_MAX_FOOTPRINT - Maximum size in memory allocated to the SPL, BSS included. - When defined, the linker checks that the actual memory - used by SPL from _start to __bss_end does not exceed it. - CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE - must not be both defined at the same time. - - CONFIG_SPL_MAX_SIZE - Maximum size of the SPL image (text, data, rodata, and - linker lists sections), BSS excluded. - When defined, the linker checks that the actual size does - not exceed it. - - CONFIG_SPL_RELOC_TEXT_BASE - Address to relocate to. If unspecified, this is equal to - CONFIG_SPL_TEXT_BASE (i.e. no relocation is done). - - CONFIG_SPL_BSS_START_ADDR - Link address for the BSS within the SPL binary. - - CONFIG_SPL_BSS_MAX_SIZE - Maximum size in memory allocated to the SPL BSS. - When defined, the linker checks that the actual memory used - by SPL from __bss_start to __bss_end does not exceed it. - CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE - must not be both defined at the same time. - - CONFIG_SPL_STACK - Adress of the start of the stack SPL will use - CONFIG_SPL_PANIC_ON_RAW_IMAGE When defined, SPL will panic() if the image it has loaded does not have a signature. @@ -1698,65 +1635,20 @@ The following options need to be configured: consider that a completely unreadable NAND block is bad, and thus should be skipped silently. - CONFIG_SPL_RELOC_STACK - Adress of the start of the stack SPL will use after - relocation. If unspecified, this is equal to - CONFIG_SPL_STACK. - - CONFIG_SYS_SPL_MALLOC_START - Starting address of the malloc pool used in SPL. - When this option is set the full malloc is used in SPL and - it is set up by spl_init() and before that, the simple malloc() - can be used if CONFIG_SYS_MALLOC_F is defined. - - CONFIG_SYS_SPL_MALLOC_SIZE - The size of the malloc pool used in SPL. - CONFIG_SPL_DISPLAY_PRINT For ARM, enable an optional function to print more information about the running system. - CONFIG_SPL_INIT_MINIMAL - Arch init code should be built for a very small image - - CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, - CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS - Sector and number of sectors to load kernel argument - parameters from when MMC is being used in raw mode - (for falcon mode) - - CONFIG_SPL_FS_LOAD_PAYLOAD_NAME - Filename to read to load U-Boot when reading from filesystem - - CONFIG_SPL_FS_LOAD_KERNEL_NAME - Filename to read to load kernel uImage when reading - from filesystem (for Falcon mode) - - CONFIG_SPL_FS_LOAD_ARGS_NAME - Filename to read to load kernel argument parameters - when reading from filesystem (for Falcon mode) - CONFIG_SPL_MPC83XX_WAIT_FOR_NAND Set this for NAND SPL on PPC mpc83xx targets, so that start.S waits for the rest of the SPL to load before continuing (the hardware starts execution after just loading the first page rather than the full 4K). - CONFIG_SPL_SKIP_RELOCATE - Avoid SPL relocation - CONFIG_SPL_UBI Support for a lightweight UBI (fastmap) scanner and loader - CONFIG_SPL_NAND_RAW_ONLY - Support to boot only raw u-boot.bin images. Use this only - if you need to save space. - - CONFIG_SPL_COMMON_INIT_DDR - Set for common ddr init with serial presence detect in - SPL binary. - CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT, CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE, CONFIG_SYS_NAND_BLOCK_SIZE, CONFIG_SYS_NAND_BAD_BLOCK_POS, @@ -1781,35 +1673,12 @@ The following options need to be configured: CONFIG_SPL_RAM_DEVICE Support for running image already present in ram, in SPL binary - CONFIG_SPL_PAD_TO - Image offset to which the SPL should be padded before appending - the SPL payload. By default, this is defined as - CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. - CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL - payload without any padding, or >= CONFIG_SPL_MAX_SIZE. - - CONFIG_SPL_TARGET - Final target image containing SPL and payload. Some SPLs - use an arch-specific makefile fragment instead, for - example if more than one image needs to be produced. - CONFIG_SPL_FIT_PRINT Printing information about a FIT image adds quite a bit of code to SPL. So this is normally disabled in SPL. Use this option to re-enable it. This will affect the output of the bootm command when booting a FIT image. -- TPL framework - CONFIG_TPL - Enable building of TPL globally. - - CONFIG_TPL_PAD_TO - Image offset to which the TPL should be padded before appending - the TPL payload. By default, this is defined as - CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. - CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL - payload without any padding, or >= CONFIG_SPL_MAX_SIZE. - - Interrupt support (PPC): There are common interrupt_init() and timer_interrupt() @@ -1853,16 +1722,6 @@ Configuration Settings: - CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to prompt for user input. -- CONFIG_SYS_CBSIZE: Buffer size for input from the Console - -- CONFIG_SYS_PBSIZE: Buffer size for Console output - -- CONFIG_SYS_MAXARGS: max. Number of arguments accepted for monitor commands - -- CONFIG_SYS_BARGSIZE: Buffer size for Boot Arguments which are passed to - the application (usually a Linux kernel) when it is - booted - - CONFIG_SYS_BAUDRATE_TABLE: List of legal baudrate settings for this board. @@ -1909,7 +1768,7 @@ Configuration Settings: - CONFIG_SYS_MALLOC_SIMPLE Provides a simple and small malloc() and calloc() for those boards which do not use the full malloc in SPL (which is - enabled with CONFIG_SYS_SPL_MALLOC_START). + enabled with CONFIG_SYS_SPL_MALLOC). - CONFIG_SYS_NONCACHED_MEMORY: Size of non-cached memory area. This area of memory will be @@ -2186,10 +2045,6 @@ Low Level (hardware related) configuration options: used in assembly code, so it must not contain typecasts or integer size suffixes (e.g. "ULL"). -- CONFIG_SYS_CCSR_DO_NOT_RELOCATE: - If this macro is defined, then CONFIG_SYS_CCSRBAR_PHYS will be - forced to a value that ensures that CCSR is not relocated. - - CONFIG_SYS_IMMR: Physical address of the Internal Memory. DO NOT CHANGE unless you know exactly what you're doing! (11-4) [MPC8xx systems only] @@ -2207,24 +2062,6 @@ Low Level (hardware related) configuration options: U-Boot uses the following memory types: - MPC8xx: IMMR (internal memory of the CPU) -- CONFIG_SYS_GBL_DATA_OFFSET: - - Offset of the initial data structure in the memory - area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually - CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial - data is located at the end of the available space - (sometimes written as (CONFIG_SYS_INIT_RAM_SIZE - - GENERATED_GBL_DATA_SIZE), and the initial stack is just - below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR + - CONFIG_SYS_GBL_DATA_OFFSET) downward. - - Note: - On the MPC824X (or other systems that use the data - cache for initial memory) the address chosen for - CONFIG_SYS_INIT_RAM_ADDR is basically arbitrary - it must - point to an otherwise UNUSED address space between - the top of RAM and the start of the PCI space. - - CONFIG_SYS_SCCR: System Clock and reset Control Register (15-27) - CONFIG_SYS_OR_TIMING_SDRAM: diff --git a/arch/arc/lib/start.S b/arch/arc/lib/start.S index 016ae85be23..9f5547e552d 100644 --- a/arch/arc/lib/start.S +++ b/arch/arc/lib/start.S @@ -7,6 +7,7 @@ #include <config.h> #include <linux/linkage.h> #include <asm/arcregs.h> +#include <system-constants.h> ENTRY(_start) /* Setup interrupt vector base that matches "__text_start" */ @@ -86,7 +87,7 @@ ENTRY(_start) #endif /* Establish C runtime stack and frame */ - mov %sp, CONFIG_SYS_INIT_SP_ADDR + mov %sp, SYS_INIT_SP_ADDR mov %fp, %sp /* Allocate reserved area from current top of stack */ diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 85c23bcf775..4afa8e4adf0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -103,8 +103,8 @@ libs-y += $(machdirs) head-y := arch/arm/cpu/$(CPU)/start.o ifeq ($(CONFIG_SPL_BUILD),y) -ifneq ($(CONFIG_SPL_START_S_PATH),) -head-y := $(CONFIG_SPL_START_S_PATH:"%"=%)/start.o +ifeq ($(CONFIG_SYS_SOC)$(CONFIG_SPL_FRAMEWORK),"mxs") +head-y := arch/arm/cpu/arm926ejs/mxs/start.o endif endif diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S index adec2c8ada6..61982e38a1d 100644 --- a/arch/arm/cpu/arm926ejs/mxs/start.S +++ b/arch/arm/cpu/arm926ejs/mxs/start.S @@ -21,6 +21,7 @@ #include <asm-offsets.h> #include <config.h> #include <common.h> +#include <system-constants.h> /* ************************************************************************* @@ -44,7 +45,7 @@ reset: * it point to the end of OCRAM if the SP is zero. */ cmp sp, #0x00000000 - ldreq sp, =CONFIG_SYS_INIT_SP_ADDR + ldreq sp, =SYS_INIT_SP_ADDR /* * Store all registers on old stack pointer, this will allow us later to diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S index ba4b374a8bd..3c8c07fe016 100644 --- a/arch/arm/cpu/armv7/lowlevel_init.S +++ b/arch/arm/cpu/armv7/lowlevel_init.S @@ -13,6 +13,7 @@ #include <asm-offsets.h> #include <config.h> #include <linux/linkage.h> +#include <system-constants.h> .pushsection .text.s_init, "ax" WEAK(s_init) @@ -28,7 +29,7 @@ WEAK(lowlevel_init) #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) ldr sp, =CONFIG_SPL_STACK #else - ldr sp, =CONFIG_SYS_INIT_SP_ADDR + ldr sp, =SYS_INIT_SP_ADDR #endif bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ #ifdef CONFIG_SPL_DM diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 37036128a78..4f6327fe3ab 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -17,6 +17,7 @@ #include <asm/system.h> #include <linux/linkage.h> #include <asm/armv7.h> +#include <system-constants.h> /************************************************************************* * @@ -254,7 +255,7 @@ ENTRY(cpu_init_cp15) #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) ldr r0, =(CONFIG_SPL_STACK) #else - ldr r0, =(CONFIG_SYS_INIT_SP_ADDR) + ldr r0, =(SYS_INIT_SP_ADDR) #endif bic r0, r0, #7 /* 8-byte alignment for ABI compliance */ mov sp, r0 diff --git a/arch/arm/cpu/pxa/Makefile b/arch/arm/cpu/pxa/Makefile index 263d9ddb4a0..fab77325c79 100644 --- a/arch/arm/cpu/pxa/Makefile +++ b/arch/arm/cpu/pxa/Makefile @@ -5,7 +5,6 @@ extra-y = start.o -obj-$(CONFIG_CPU_PXA25X) += pxa2xx.o obj-$(CONFIG_CPU_PXA27X) += pxa2xx.o obj-y += cpuinfo.o diff --git a/arch/arm/cpu/pxa/cpuinfo.c b/arch/arm/cpu/pxa/cpuinfo.c index 0d9542f998e..549b61d6e0f 100644 --- a/arch/arm/cpu/pxa/cpuinfo.c +++ b/arch/arm/cpu/pxa/cpuinfo.c @@ -11,12 +11,6 @@ #include <errno.h> #include <linux/compiler.h> -#ifdef CONFIG_CPU_PXA25X -#if ((CONFIG_SYS_INIT_SP_ADDR) != 0xfffff800) -#error "Init SP address must be set to 0xfffff800 for PXA250" -#endif -#endif - #define CPU_MASK_PXA_PRODID 0x000003f0 #define CPU_MASK_PXA_REVID 0x0000000f diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 896e05f1fda..ab7bcb4e562 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -49,9 +49,6 @@ reset: bl cpu_init_crit #endif -#ifdef CONFIG_CPU_PXA25X - bl lock_cache_for_stack -#endif #ifdef CONFIG_CPU_PXA27X /* * enable clock for SRAM @@ -67,20 +64,7 @@ reset: .globl c_runtime_cpu_setup c_runtime_cpu_setup: - -#ifdef CONFIG_CPU_PXA25X - /* - * Unlock (actually, disable) the cache now that board_init_f - * is done. We could do this earlier but we would need to add - * a new C runtime hook, whereas c_runtime_cpu_setup already - * exists. - * As this routine is just a call to cpu_init_crit, let us - * tail-optimize and do a simple branch here. - */ - b cpu_init_crit -#else bx lr -#endif /* ************************************************************************* @@ -92,7 +76,7 @@ c_runtime_cpu_setup: * ************************************************************************* */ -#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) || defined(CONFIG_CPU_PXA25X) +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) cpu_init_crit: /* * flush v4 I/D caches @@ -111,95 +95,4 @@ cpu_init_crit: mcr p15, 0, r0, c1, c0, 0 mov pc, lr /* back to my caller */ -#endif /* !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) || CONFIG_CPU_PXA25X */ - -/* - * Enable MMU to use DCache as DRAM. - * - * This is useful on PXA25x and PXA26x in early bootstages, where there is no - * other possible memory available to hold stack. - */ -#ifdef CONFIG_CPU_PXA25X -.macro CPWAIT reg - mrc p15, 0, \reg, c2, c0, 0 - mov \reg, \reg - sub pc, pc, #4 -.endm -lock_cache_for_stack: - /* Domain access -- enable for all CPs */ - ldr r0, =0x0000ffff - mcr p15, 0, r0, c3, c0, 0 - - /* Point TTBR to MMU table */ - ldr r0, =mmutable - mcr p15, 0, r0, c2, c0, 0 - - /* Kick in MMU, ICache, DCache, BTB */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, #0x1b00 - bic r0, #0x0087 - orr r0, #0x1800 - orr r0, #0x0005 - mcr p15, 0, r0, c1, c0, 0 - CPWAIT r0 - - /* Unlock Icache, Dcache */ - mcr p15, 0, r0, c9, c1, 1 - mcr p15, 0, r0, c9, c2, 1 - - /* Flush Icache, Dcache, BTB */ - mcr p15, 0, r0, c7, c7, 0 - - /* Unlock I-TLB, D-TLB */ - mcr p15, 0, r0, c10, c4, 1 - mcr p15, 0, r0, c10, c8, 1 - - /* Flush TLB */ - mcr p15, 0, r0, c8, c7, 0 - - /* Allocate 4096 bytes of Dcache as RAM */ - - /* Drain pending loads and stores */ - mcr p15, 0, r0, c7, c10, 4 - - mov r4, #0x00 - mov r5, #0x00 - mov r2, #0x01 - mcr p15, 0, r0, c9, c2, 0 - CPWAIT r0 - - /* 128 lines reserved (128 x 32bytes = 4096 bytes total) */ - mov r0, #128 - ldr r1, =0xfffff000 - -alloc: - mcr p15, 0, r1, c7, c2, 5 - /* Drain pending loads and stores */ - mcr p15, 0, r0, c7, c10, 4 - strd r4, [r1], #8 - strd r4, [r1], #8 - strd r4, [r1], #8 - strd r4, [r1], #8 - subs r0, #0x01 - bne alloc - /* Drain pending loads and stores */ - mcr p15, 0, r0, c7, c10, 4 - mov r2, #0x00 - mcr p15, 0, r2, c9, c2, 0 - CPWAIT r0 - - mov pc, lr - -.section .mmutable, "a" -mmutable: - .align 14 - /* 0x00000000 - 0xffe00000 : 1:1, uncached mapping */ - .set __base, 0 - .rept 0xfff - .word (__base << 20) | 0xc12 - .set __base, __base + 1 - .endr - - /* 0xfff00000 : 1:1, cached mapping */ - .word (0xfff << 20) | 0x1c1e -#endif /* CONFIG_CPU_PXA25X */ +#endif /* !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index 06adf669390..61db1738f33 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -142,25 +142,6 @@ #define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */ #define TP_INIT_PER_CLUSTER 4 -/* - * Define default values for some CCSR macros to make header files cleaner* - * - * To completely disable CCSR relocation in a board header file, define - * CONFIG_SYS_CCSR_DO_NOT_RELOCATE. This will force CONFIG_SYS_CCSRBAR_PHYS - * to a value that is the same as CONFIG_SYS_CCSRBAR. - */ - -#ifdef CONFIG_SYS_CCSRBAR_PHYS -#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly. Use \ -CONFIG_SYS_CCSRBAR_PHYS_LOW and/or CONFIG_SYS_CCSRBAR_PHYS_HIGH instead." -#endif - -#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#undef CONFIG_SYS_CCSRBAR_PHYS_HIGH -#undef CONFIG_SYS_CCSRBAR_PHYS_LOW -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0 -#endif - #ifndef CONFIG_SYS_CCSRBAR #define CONFIG_SYS_CCSRBAR 0x01000000 #endif diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index f2ba182346e..b0acf677984 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -42,24 +42,6 @@ #define DCFG_DCSR_PORCR1 0 -/* - * Define default values for some CCSR macros to make header files cleaner - * - * To completely disable CCSR relocation in a board header file, define - * CONFIG_SYS_CCSR_DO_NOT_RELOCATE. This will force CONFIG_SYS_CCSRBAR_PHYS - * to a value that is the same as CONFIG_SYS_CCSRBAR. - */ - -#ifdef CONFIG_SYS_CCSRBAR_PHYS -#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly." -#endif - -#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#undef CONFIG_SYS_CCSRBAR_PHYS_HIGH -#undef CONFIG_SYS_CCSRBAR_PHYS_LOW -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0 -#endif - #ifndef CONFIG_SYS_CCSRBAR #define CONFIG_SYS_CCSRBAR CONFIG_SYS_IMMR #endif diff --git a/arch/arm/include/asm/arch-omap4/clock.h b/arch/arm/include/asm/arch-omap4/clock.h index 0a626fe647a..4054dd8edcb 100644 --- a/arch/arm/include/asm/arch-omap4/clock.h +++ b/arch/arm/include/asm/arch-omap4/clock.h @@ -7,7 +7,6 @@ */ #ifndef _CLOCKS_OMAP4_H_ #define _CLOCKS_OMAP4_H_ -#include <asm/omap_common.h> /* * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index a00626e357c..b18ef459dec 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -8,7 +8,6 @@ */ #ifndef _CLOCKS_OMAP5_H_ #define _CLOCKS_OMAP5_H_ -#include <asm/omap_common.h> /* * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per diff --git a/arch/arm/include/asm/arch-pxa/config.h b/arch/arm/include/asm/arch-pxa/config.h index 75b0e491ed5..11effd47f5b 100644 --- a/arch/arm/include/asm/arch-pxa/config.h +++ b/arch/arm/include/asm/arch-pxa/config.h @@ -13,8 +13,6 @@ */ #if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) #define CONFIG_SYS_TIMER_RATE 3250000 -#elif defined(CONFIG_CPU_PXA25X) -#define CONFIG_SYS_TIMER_RATE 3686400 #else #error "Timer frequency unknown - please config PXA CPU type" #endif diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h index 14860d89b6b..26f18777914 100644 --- a/arch/arm/include/asm/config.h +++ b/arch/arm/include/asm/config.h @@ -11,7 +11,6 @@ #if defined(CONFIG_ARCH_LS1021A) || \ defined(CONFIG_CPU_PXA27X) || \ defined(CONFIG_CPU_MONAHANS) || \ - defined(CONFIG_CPU_PXA25X) || \ defined(CONFIG_FSL_LAYERSCAPE) #include <asm/arch/config.h> #endif diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 264a2e717a7..17fdfbcffb7 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -13,6 +13,7 @@ #include <linux/types.h> #define NUM_SYS_CLKS 7 +#define SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ struct bd_info; diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index 612a2d5b698..fe6b4472b93 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -9,6 +9,7 @@ #include <asm-offsets.h> #include <linux/linkage.h> #include <asm/assembler.h> +#include <system-constants.h> /* * This file handles the target-independent stages of the U-Boot @@ -104,7 +105,7 @@ ENTRY(_main) #elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) ldr r0, =(CONFIG_SPL_STACK) #else - ldr r0, =(CONFIG_SYS_INIT_SP_ADDR) + ldr r0, =(SYS_INIT_SP_ADDR) #endif bic r0, r0, #7 /* 8-byte alignment for ABI compliance */ mov sp, r0 diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S index 84c04bd43a2..dcc924dd2f4 100644 --- a/arch/arm/lib/crt0_64.S +++ b/arch/arm/lib/crt0_64.S @@ -13,6 +13,7 @@ #include <asm-offsets.h> #include <asm/macro.h> #include <linux/linkage.h> +#include <system-constants.h> /* * This file handles the target-independent stages of the U-Boot @@ -81,7 +82,7 @@ ENTRY(_main) #endif add x0, x0, #CONFIG_SYS_INIT_SP_BSS_OFFSET #else - ldr x0, =(CONFIG_SYS_INIT_SP_ADDR) + ldr x0, =(SYS_INIT_SP_ADDR) #endif bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */ mov x0, sp diff --git a/arch/arm/lib/vectors_m.S b/arch/arm/lib/vectors_m.S index 7d2d55c7f9f..8d88cc756fc 100644 --- a/arch/arm/lib/vectors_m.S +++ b/arch/arm/lib/vectors_m.S @@ -7,6 +7,7 @@ #include <config.h> #include <asm/assembler.h> #include <linux/linkage.h> +#include <system-constants.h> .type __hard_fault_entry, %function __hard_fault_entry: @@ -35,7 +36,7 @@ __invalid_entry: .section .vectors ENTRY(_start) - .long CONFIG_SYS_INIT_SP_ADDR @ 0 - Reset stack pointer + .long SYS_INIT_SP_ADDR @ 0 - Reset stack pointer .long reset @ 1 - Reset .long __invalid_entry @ 2 - NMI .long __hard_fault_entry @ 3 - HardFault diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index 7810cf22d4e..45ee0272f77 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -27,9 +27,6 @@ #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 for kernel */ -/* Kirkwood has 2k of Security SRAM, use it for SP */ -#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 - #define CONFIG_I2C_MVTWSI_BASE0 KW_TWSI_BASE #define MV_UART_CONSOLE_BASE KW_UART0_BASE #define MV_SATA_BASE KW_SATA_BASE diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 8bd2246325c..61eeb9c8c18 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -65,10 +65,12 @@ KWB_REPLACE += CSK_INDEX KWB_CFG_CSK_INDEX = $(CONFIG_SECURED_MODE_CSK_INDEX) KWB_REPLACE += SEC_BOOT_DEV -KWB_CFG_SEC_BOOT_DEV=$(patsubst "%",%, \ - $(if $(findstring BOOT_SPI_NOR_FLASH,$(CONFIG_SPL_BOOT_DEVICE)),0x34) \ - $(if $(findstring BOOT_SDIO_MMC_CARD,$(CONFIG_SPL_BOOT_DEVICE)),0x31) \ - ) +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI),) + KWB_CFG_SEC_BOOT_DEV=0x34 +endif +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),) + KWB_CFG_SEC_BOOT_DEV=0x31 +endif KWB_REPLACE += SEC_FUSE_DUMP KWB_CFG_SEC_FUSE_DUMP = a38x diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h index fb4e5af770c..4add0d9e103 100644 --- a/arch/arm/mach-mvebu/include/mach/config.h +++ b/arch/arm/mach-mvebu/include/mach/config.h @@ -27,9 +27,6 @@ #define CONFIG_SYS_L2_PL310 -/* end of 16M scrubbed by training in bootrom */ -#define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000 - #define MV_UART_CONSOLE_BASE MVEBU_UART0_BASE /* Needed for SPI NOR booting in SPL */ diff --git a/arch/arm/mach-mvebu/lowlevel_spl.S b/arch/arm/mach-mvebu/lowlevel_spl.S index 501c239e9d3..49891df9ea9 100644 --- a/arch/arm/mach-mvebu/lowlevel_spl.S +++ b/arch/arm/mach-mvebu/lowlevel_spl.S @@ -8,19 +8,19 @@ * contains U-Boot SPL, optionally it can also contain additional arguments. * The number of these arguments is in r0, pointer to the argument array in r1. * BootROM expects executable BIN header code to return to address stored in lr. - * Other registers (r2 - r12) must be preserved. We save all registers to - * CONFIG_SPL_BOOTROM_SAVE address. BIN header arguments (passed via r0 and r1) + * Other registers (r2 - r12) must be preserved. We save all registers to the + * address of CONFIG_SPL_STACK + 4. BIN header arguments (passed via r0 and r1) * are currently not used by U-Boot SPL binary. */ ENTRY(save_boot_params) stmfd sp!, {r0 - r12, lr} /* @ save registers on stack */ - ldr r12, =CONFIG_SPL_BOOTROM_SAVE + ldr r12, =(CONFIG_SPL_STACK + 4) str sp, [r12] b save_boot_params_ret ENDPROC(save_boot_params) ENTRY(return_to_bootrom) - ldr r12, =CONFIG_SPL_BOOTROM_SAVE + ldr r12, =(CONFIG_SPL_STACK + 4) ldr sp, [r12] ldmfd sp!, {r0 - r12, lr} /* @ restore registers from stack */ mov r0, #0x0 /* @ return value: 0x0 NO_ERR */ diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c index fa9a1d7ab65..13c99913c38 100644 --- a/arch/arm/mach-mvebu/spl.c +++ b/arch/arm/mach-mvebu/spl.c @@ -283,7 +283,7 @@ u32 spl_boot_device(void) int board_return_to_bootrom(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) { - u32 *regs = *(u32 **)CONFIG_SPL_BOOTROM_SAVE; + u32 *regs = *(u32 **)(CONFIG_SPL_STACK + 4); printf("Returning to BootROM (return address 0x%08x)...\n", regs[13]); return_to_bootrom(); diff --git a/arch/arm/mach-omap2/sata.c b/arch/arm/mach-omap2/sata.c index 4672dc534c5..53c39ce1fb6 100644 --- a/arch/arm/mach-omap2/sata.c +++ b/arch/arm/mach-omap2/sata.c @@ -13,6 +13,7 @@ #include <asm/arch/sata.h> #include <sata.h> #include <asm/io.h> +#include <asm/omap_common.h> #include "pipe3-phy.h" static struct pipe3_dpll_map dpll_map_sata[] = { diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 82b10f6b248..00d91c10136 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -22,6 +22,7 @@ #include <asm/io.h> #include <asm/arch/cpu.h> #include <asm/arch/clock.h> +#include <asm/omap_common.h> #include <linux/delay.h> DECLARE_GLOBAL_DATA_PTR; @@ -33,7 +34,7 @@ static ulong get_timer_masked(void); * Nothing really to do with interrupts, just starts up a counter. */ -#define TIMER_CLOCK (V_SCLK / (2 << CONFIG_SYS_PTV)) +#define TIMER_CLOCK (V_SCLK / (2 << SYS_PTV)) #define TIMER_OVERFLOW_VAL 0xffffffff #define TIMER_LOAD_VAL 0 @@ -42,7 +43,7 @@ int timer_init(void) /* start the counter ticking up, reload value on overflow */ writel(TIMER_LOAD_VAL, &timer_base->tldr); /* enable timer */ - writel((CONFIG_SYS_PTV << 2) | TCLR_PRE | TCLR_AR | TCLR_ST, + writel((SYS_PTV << 2) | TCLR_PRE | TCLR_AR | TCLR_ST, &timer_base->tclr); return 0; diff --git a/arch/arm/mach-rmobile/lowlevel_init.S b/arch/arm/mach-rmobile/lowlevel_init.S index eb6012a8740..212e95539bc 100644 --- a/arch/arm/mach-rmobile/lowlevel_init.S +++ b/arch/arm/mach-rmobile/lowlevel_init.S @@ -6,6 +6,7 @@ #include <config.h> #include <linux/linkage.h> +#include <system-constants.h> ENTRY(lowlevel_init) ldr r0, =MERAM_BASE diff --git a/arch/arm/mach-rmobile/lowlevel_init_ca15.S b/arch/arm/mach-rmobile/lowlevel_init_ca15.S index 967fb027a43..a52b761b25d 100644 --- a/arch/arm/mach-rmobile/lowlevel_init_ca15.S +++ b/arch/arm/mach-rmobile/lowlevel_init_ca15.S @@ -8,6 +8,7 @@ #include <config.h> #include <linux/linkage.h> +#include <system-constants.h> ENTRY(lowlevel_init) #ifndef CONFIG_SPL_BUILD @@ -75,7 +76,7 @@ _enable_actlr_smp: /* R8A7794 only (CA7) */ #endif _exit_init_l2_a15: - ldr r3, =(CONFIG_SYS_INIT_SP_ADDR) + ldr r3, =(SYS_INIT_SP_ADDR) sub sp, r3, #4 str lr, [sp] diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig index 4886fe946e3..28639c00414 100644 --- a/arch/arm/mach-rockchip/px30/Kconfig +++ b/arch/arm/mach-rockchip/px30/Kconfig @@ -56,9 +56,6 @@ config TPL_LDSCRIPT config TPL_TEXT_BASE default 0xff0e1000 -config TPL_MAX_SIZE - default 10240 - config TPL_STACK default 0xff0e4fff diff --git a/arch/arm/mach-rockchip/rk322x/Kconfig b/arch/arm/mach-rockchip/rk322x/Kconfig index 058f848ddc7..9ad1f54055b 100644 --- a/arch/arm/mach-rockchip/rk322x/Kconfig +++ b/arch/arm/mach-rockchip/rk322x/Kconfig @@ -26,9 +26,6 @@ config SPL_LIBGENERIC_SUPPORT config SPL_SERIAL default y -config TPL_MAX_SIZE - default 28672 - config TPL_STACK default 0x10088000 diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig index dd8c7826fc1..e8c57843a38 100644 --- a/arch/arm/mach-rockchip/rk3288/Kconfig +++ b/arch/arm/mach-rockchip/rk3288/Kconfig @@ -172,9 +172,6 @@ config SPL_SERIAL config TPL_LDSCRIPT default "arch/arm/mach-rockchip/u-boot-tpl.lds" -config TPL_MAX_SIZE - default 32768 - config TPL_STACK default 0xff718000 diff --git a/arch/arm/mach-rockchip/rk3328/Kconfig b/arch/arm/mach-rockchip/rk3328/Kconfig index f6f1e06a83f..d5cb649ae6b 100644 --- a/arch/arm/mach-rockchip/rk3328/Kconfig +++ b/arch/arm/mach-rockchip/rk3328/Kconfig @@ -36,9 +36,6 @@ config TPL_LDSCRIPT config TPL_TEXT_BASE default 0xff091000 -config TPL_MAX_SIZE - default 28672 - config TPL_STACK default 0xff098000 diff --git a/arch/arm/mach-rockchip/rk3368/Kconfig b/arch/arm/mach-rockchip/rk3368/Kconfig index 104db36737b..25afd3cb607 100644 --- a/arch/arm/mach-rockchip/rk3368/Kconfig +++ b/arch/arm/mach-rockchip/rk3368/Kconfig @@ -71,9 +71,6 @@ config SPL_LDSCRIPT config SPL_STACK_R_ADDR default 0x04000000 -config TPL_MAX_SIZE - default 28672 - config TPL_STACK default 0xff8cffff diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig index c1f251316cb..b48feeb3466 100644 --- a/arch/arm/mach-rockchip/rk3399/Kconfig +++ b/arch/arm/mach-rockchip/rk3399/Kconfig @@ -143,9 +143,6 @@ config SPL_LIBGENERIC_SUPPORT config TPL_LDSCRIPT default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" -config TPL_MAX_SIZE - default 188416 - config TPL_STACK default 0xff8effff diff --git a/arch/arm/mach-uniphier/arm32/late_lowlevel_init.S b/arch/arm/mach-uniphier/arm32/late_lowlevel_init.S index 36db50fd97b..6c722d02eda 100644 --- a/arch/arm/mach-uniphier/arm32/late_lowlevel_init.S +++ b/arch/arm/mach-uniphier/arm32/late_lowlevel_init.S @@ -6,8 +6,9 @@ #include <config.h> #include <linux/linkage.h> +#include <system-constants.h> ENTRY(lowlevel_init) - ldr sp, = CONFIG_SYS_INIT_SP_ADDR + ldr sp, = SYS_INIT_SP_ADDR b uniphier_cache_disable ENDPROC(lowlevel_init) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 7f6e4310f1f..e609ae0c9cd 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -53,12 +53,6 @@ config MCF5441x select DM_SERIAL bool -config MCF5227x - select OF_CONTROL - select DM - select DM_SERIAL - bool - # processor type config M5208 bool diff --git a/arch/m68k/cpu/mcf5227x/Makefile b/arch/m68k/cpu/mcf5227x/Makefile deleted file mode 100644 index 6a38c4838e9..00000000000 --- a/arch/m68k/cpu/mcf5227x/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -# ccflags-y += -DET_DEBUG - -extra-y = start.o -obj-y = cpu.o speed.o cpu_init.o interrupts.o dspi.o diff --git a/arch/m68k/cpu/mcf5227x/cpu.c b/arch/m68k/cpu/mcf5227x/cpu.c deleted file mode 100644 index a7adf64f0de..00000000000 --- a/arch/m68k/cpu/mcf5227x/cpu.c +++ /dev/null @@ -1,67 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -#include <common.h> -#include <init.h> -#include <vsprintf.h> -#include <watchdog.h> -#include <command.h> -#include <asm/global_data.h> -#include <linux/delay.h> - -#include <asm/immap.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - rcm_t *rcm = (rcm_t *) (MMAP_RCM); - udelay(1000); - setbits_8(&rcm->rcr, RCM_RCR_SOFTRST); - - /* we don't return! */ - return 0; -}; - -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) -{ - ccm_t *ccm = (ccm_t *) MMAP_CCM; - u16 msk; - u16 id = 0; - u8 ver; - - puts("CPU: "); - msk = (in_be16(&ccm->cir) >> 6); - ver = (in_be16(&ccm->cir) & 0x003f); - switch (msk) { - case 0x6c: - id = 52277; - break; - } - - if (id) { - char buf1[32], buf2[32], buf3[32]; - - printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, - ver); - printf(" CPU CLK %s MHz BUS CLK %s MHz FLB CLK %s MHz\n", - strmhz(buf1, gd->cpu_clk), - strmhz(buf2, gd->bus_clk), - strmhz(buf3, gd->arch.flb_clk)); - printf(" INP CLK %s MHz VCO CLK %s MHz\n", - strmhz(buf1, gd->arch.inp_clk), - strmhz(buf2, gd->arch.vco_clk)); - } - - return 0; -} -#endif /* CONFIG_DISPLAY_CPUINFO */ diff --git a/arch/m68k/cpu/mcf5227x/cpu_init.c b/arch/m68k/cpu/mcf5227x/cpu_init.c deleted file mode 100644 index 4ab13b4d8ea..00000000000 --- a/arch/m68k/cpu/mcf5227x/cpu_init.c +++ /dev/null @@ -1,152 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004-2007, 2012 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -#include <common.h> -#include <cpu_func.h> -#include <init.h> -#include <watchdog.h> - -#include <asm/immap.h> -#include <asm/io.h> -#include <asm/rtc.h> -#include <linux/compiler.h> - -void cfspi_port_conf(void) -{ - gpio_t *gpio = (gpio_t *)MMAP_GPIO; - - out_8(&gpio->par_dspi, - GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT | - GPIO_PAR_DSPI_SCK_SCK); -} - -/* - * Breath some life into the CPU... - * - * Set up the memory map, - * initialize a bunch of registers, - * initialize the UPM's - */ -void cpu_init_f(void) -{ - gpio_t *gpio = (gpio_t *) MMAP_GPIO; - fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS; - -#if !defined(CONFIG_CF_SBF) - scm1_t *scm1 = (scm1_t *) MMAP_SCM1; - pll_t *pll = (pll_t *)MMAP_PLL; - - /* Workaround, must place before fbcs */ - out_be32(&pll->psr, 0x12); - - out_be32(&scm1->mpr, 0x77777777); - out_be32(&scm1->pacra, 0); - out_be32(&scm1->pacrb, 0); - out_be32(&scm1->pacrc, 0); - out_be32(&scm1->pacrd, 0); - out_be32(&scm1->pacre, 0); - out_be32(&scm1->pacrf, 0); - out_be32(&scm1->pacrg, 0); - out_be32(&scm1->pacri, 0); - -#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \ - && defined(CONFIG_SYS_CS0_CTRL)) - out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE); - out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); - out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK); -#endif -#endif /* CONFIG_CF_SBF */ - -#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \ - && defined(CONFIG_SYS_CS1_CTRL)) - out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE); - out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL); - out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK); -#endif - -#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \ - && defined(CONFIG_SYS_CS2_CTRL)) - out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE); - out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL); - out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK); -#endif - -#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \ - && defined(CONFIG_SYS_CS3_CTRL)) - out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE); - out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL); - out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK); -#endif - -#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \ - && defined(CONFIG_SYS_CS4_CTRL)) - out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE); - out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL); - out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK); -#endif - -#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \ - && defined(CONFIG_SYS_CS5_CTRL)) - out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE); - out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL); - out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK); -#endif - -#ifdef CONFIG_SYS_I2C_FSL - out_8(&gpio->par_i2c, GPIO_PAR_I2C_SCL_SCL | GPIO_PAR_I2C_SDA_SDA); -#endif - - icache_enable(); - - cfspi_port_conf(); -} - -/* - * initialize higher level parts of CPU like timers - */ -int cpu_init_r(void) -{ -#ifdef CONFIG_MCFRTC - rtc_t *rtc = (rtc_t *)(CONFIG_SYS_MCFRTC_BASE); - rtcex_t *rtcex = (rtcex_t *)&rtc->extended; - - out_be32(&rtcex->gocu, (CONFIG_SYS_RTC_OSCILLATOR >> 16) & 0xffff); - out_be32(&rtcex->gocl, CONFIG_SYS_RTC_OSCILLATOR & 0xffff); -#endif - - return (0); -} - -void uart_port_conf(int port) -{ - gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - /* Setup Ports: */ - switch (port) { - case 0: - clrbits_be16(&gpio->par_uart, - ~(GPIO_PAR_UART_U0TXD_UNMASK & GPIO_PAR_UART_U0RXD_UNMASK)); - setbits_be16(&gpio->par_uart, - GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); - break; - case 1: - clrbits_be16(&gpio->par_uart, - ~(GPIO_PAR_UART_U1TXD_UNMASK & GPIO_PAR_UART_U1RXD_UNMASK)); - setbits_be16(&gpio->par_uart, - GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); - break; - case 2: - clrbits_8(&gpio->par_dspi, - ~(GPIO_PAR_DSPI_SIN_UNMASK & GPIO_PAR_DSPI_SOUT_UNMASK)); - out_8(&gpio->par_dspi, - GPIO_PAR_DSPI_SIN_U2RXD | GPIO_PAR_DSPI_SOUT_U2TXD); - break; - } -} diff --git a/arch/m68k/cpu/mcf5227x/dspi.c b/arch/m68k/cpu/mcf5227x/dspi.c deleted file mode 100644 index 8fc4da271e8..00000000000 --- a/arch/m68k/cpu/mcf5227x/dspi.c +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2019 - * Angelo Dureghello <angleo@sysam.it> - * - * CPU specific dspi routines - */ - -#include <common.h> -#include <asm/immap.h> -#include <asm/io.h> - -#ifdef CONFIG_CF_DSPI -void dspi_chip_select(int cs) -{ - struct gpio *gpio = (struct gpio *)MMAP_GPIO; - - switch (cs) { - case 0: - clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_UNMASK); - setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); - break; - case 2: - clrbits_8(&gpio->par_timer, ~GPIO_PAR_TIMER_T2IN_UNMASK); - setbits_8(&gpio->par_timer, GPIO_PAR_TIMER_T2IN_DSPIPCS2); - break; - } -} - -void dspi_chip_unselect(int cs) -{ - struct gpio *gpio = (struct gpio *)MMAP_GPIO; - - switch (cs) { - case 0: - clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); - break; - case 2: - clrbits_8(&gpio->par_timer, ~GPIO_PAR_TIMER_T2IN_UNMASK); - break; - } -} -#endif /* CONFIG_CF_DSPI */ diff --git a/arch/m68k/cpu/mcf5227x/interrupts.c b/arch/m68k/cpu/mcf5227x/interrupts.c deleted file mode 100644 index 5a6a88cd571..00000000000 --- a/arch/m68k/cpu/mcf5227x/interrupts.c +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -/* CPU specific interrupt routine */ -#include <common.h> -#include <irq_func.h> -#include <asm/immap.h> -#include <asm/io.h> - -int interrupt_init(void) -{ - int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE); - - /* Make sure all interrupts are disabled */ - setbits_be32(&intp->imrh0, 0xffffffff); - setbits_be32(&intp->imrl0, 0xffffffff); - - enable_interrupts(); - return 0; -} - -#if defined(CONFIG_MCFTMR) -void dtimer_intr_setup(void) -{ - int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE); - - out_8(&intp->icr0[CONFIG_SYS_TMRINTR_NO], CONFIG_SYS_TMRINTR_PRI); - clrbits_be32(&intp->imrh0, CONFIG_SYS_TMRINTR_MASK); -} -#endif diff --git a/arch/m68k/cpu/mcf5227x/speed.c b/arch/m68k/cpu/mcf5227x/speed.c deleted file mode 100644 index fa9d5cb7887..00000000000 --- a/arch/m68k/cpu/mcf5227x/speed.c +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * - * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -#include <common.h> -#include <clock_legacy.h> -#include <asm/global_data.h> -#include <asm/processor.h> - -#include <asm/immap.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Low Power Divider specifications - */ -#define CLOCK_LPD_MIN (1 << 0) /* Divider (decoded) */ -#define CLOCK_LPD_MAX (1 << 15) /* Divider (decoded) */ - -#define CLOCK_PLL_FVCO_MAX 540000000 -#define CLOCK_PLL_FVCO_MIN 300000000 - -#define CLOCK_PLL_FSYS_MAX 266666666 -#define CLOCK_PLL_FSYS_MIN 100000000 -#define MHZ 1000000 - -void clock_enter_limp(int lpdiv) -{ - ccm_t *ccm = (ccm_t *)MMAP_CCM; - int i, j; - - /* Check bounds of divider */ - if (lpdiv < CLOCK_LPD_MIN) - lpdiv = CLOCK_LPD_MIN; - if (lpdiv > CLOCK_LPD_MAX) - lpdiv = CLOCK_LPD_MAX; - - /* Round divider down to nearest power of two */ - for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ; - - /* Apply the divider to the system clock */ - clrsetbits_be16(&ccm->cdr, 0x0f00, CCM_CDR_LPDIV(i)); - - /* Enable Limp Mode */ - setbits_be16(&ccm->misccr, CCM_MISCCR_LIMP); -} - -/* - * brief Exit Limp mode - * warning The PLL should be set and locked prior to exiting Limp mode - */ -void clock_exit_limp(void) -{ - ccm_t *ccm = (ccm_t *)MMAP_CCM; - pll_t *pll = (pll_t *)MMAP_PLL; - - /* Exit Limp mode */ - clrbits_be16(&ccm->misccr, CCM_MISCCR_LIMP); - - /* Wait for the PLL to lock */ - while (!(in_be32(&pll->psr) & PLL_PSR_LOCK)) - ; -} - -/* - * get_clocks() fills in gd->cpu_clock and gd->bus_clk - */ -int get_clocks(void) -{ - - ccm_t *ccm = (ccm_t *)MMAP_CCM; - pll_t *pll = (pll_t *)MMAP_PLL; - int vco, temp, pcrvalue, pfdr; - u8 bootmode; - - pcrvalue = in_be32(&pll->pcr) & 0xFF0F0FFF; - pfdr = pcrvalue >> 24; - - if (pfdr == 0x1E) - bootmode = 0; /* Normal Mode */ - -#ifdef CONFIG_CF_SBF - bootmode = 3; /* Serial Mode */ -#endif - - if (bootmode == 0) { - /* Normal mode */ - vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC; - if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) { - /* Default value */ - pcrvalue = (in_be32(&pll->pcr) & 0x00FFFFFF); - pcrvalue |= 0x1E << 24; - out_be32(&pll->pcr, pcrvalue); - vco = - ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * - CONFIG_SYS_INPUT_CLKSRC; - } - gd->arch.vco_clk = vco; /* Vco clock */ - } else if (bootmode == 3) { - /* serial mode */ - vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC; - gd->arch.vco_clk = vco; /* Vco clock */ - } - - if ((in_be16(&ccm->ccr) & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) { - /* Limp mode */ - } else { - gd->arch.inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */ - - temp = (in_be32(&pll->pcr) & PLL_PCR_OUTDIV1_MASK) + 1; - gd->cpu_clk = vco / temp; /* cpu clock */ - - temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; - gd->arch.flb_clk = vco / temp; /* flexbus clock */ - gd->bus_clk = gd->arch.flb_clk; - } - -#ifdef CONFIG_SYS_I2C_FSL - gd->arch.i2c1_clk = gd->bus_clk; -#endif - - return (0); -} diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S deleted file mode 100644 index 632f1b1f38c..00000000000 --- a/arch/m68k/cpu/mcf5227x/start.S +++ /dev/null @@ -1,491 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2003 Josef Baumgartner <josef.baumgartner@telex.de> - * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com> - */ - -#include <asm-offsets.h> -#include <config.h> -#include <asm/cache.h> - -#define _START _start -#define _FAULT _fault - -#define SAVE_ALL \ - move.w #0x2700,%sr; /* disable intrs */ \ - subl #60,%sp; /* space for 15 regs */ \ - moveml %d0-%d7/%a0-%a6,%sp@; - -#define RESTORE_ALL \ - moveml %sp@,%d0-%d7/%a0-%a6; \ - addl #60,%sp; /* space for 15 regs */ \ - rte; - -#if defined(CONFIG_CF_SBF) -#define ASM_DRAMINIT (asm_dram_init - CONFIG_SYS_TEXT_BASE + \ - CONFIG_SYS_INIT_RAM_ADDR) -#define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + \ - CONFIG_SYS_INIT_RAM_ADDR) -#endif - -.text - -/* - * Vector table. This is used for initial platform startup. - * These vectors are to catch any un-intended traps. - */ -_vectors: -#if defined(CONFIG_CF_SBF) -INITSP: .long 0 /* Initial SP */ -INITPC: .long ASM_DRAMINIT /* Initial PC */ -#else -INITSP: .long 0 /* Initial SP */ -INITPC: .long _START /* Initial PC */ -#endif - -vector02_0F: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -/* Reserved */ -vector10_17: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -vector18_1F: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -#if !defined(CONFIG_CF_SBF) -/* TRAP #0 - #15 */ -vector20_2F: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -/* Reserved */ -vector30_3F: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -vector64_127: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -vector128_191: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -vector192_255: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -#endif - -#if defined(CONFIG_CF_SBF) - /* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */ -asm_sbf_img_hdr: - .long 0x00000000 /* checksum, not yet implemented */ - .long 0x00020000 /* image length */ - .long CONFIG_SYS_TEXT_BASE /* image to be relocated at */ - -asm_dram_init: - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 - movec %d0, %RAMBAR1 /* init Rambar */ - - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp - clr.l %sp@- - - /* Must disable global address */ - move.l #0xFC008000, %a1 - move.l #(CONFIG_SYS_CS0_BASE), (%a1) - move.l #0xFC008008, %a1 - move.l #(CONFIG_SYS_CS0_CTRL), (%a1) - move.l #0xFC008004, %a1 - move.l #(CONFIG_SYS_CS0_MASK), (%a1) - - /* - * Dram Initialization - * a1, a2, and d0 - */ - move.l #0xFC0A4074, %a1 - move.b #(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1) - nop - - /* SDRAM Chip 0 and 1 */ - move.l #0xFC0B8110, %a1 - move.l #0xFC0B8114, %a2 - - /* calculate the size */ - move.l #0x13, %d1 - move.l #(CONFIG_SYS_SDRAM_SIZE), %d2 -#ifdef CONFIG_SYS_SDRAM_BASE1 - lsr.l #1, %d2 -#endif - -dramsz_loop: - lsr.l #1, %d2 - add.l #1, %d1 - cmp.l #1, %d2 - bne dramsz_loop - - /* SDRAM Chip 0 and 1 */ - move.l #(CONFIG_SYS_SDRAM_BASE), (%a1) - or.l %d1, (%a1) -#ifdef CONFIG_SYS_SDRAM_BASE1 - move.l #(CONFIG_SYS_SDRAM_BASE1), (%a2) - or.l %d1, (%a2) -#endif - nop - - /* dram cfg1 and cfg2 */ - move.l #0xFC0B8008, %a1 - move.l #(CONFIG_SYS_SDRAM_CFG1), (%a1) - nop - move.l #0xFC0B800C, %a2 - move.l #(CONFIG_SYS_SDRAM_CFG2), (%a2) - nop - - move.l #0xFC0B8000, %a1 /* Mode */ - move.l #0xFC0B8004, %a2 /* Ctrl */ - - /* Issue PALL */ - move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) - nop - - /* Issue LEMR */ - move.l #(CONFIG_SYS_SDRAM_MODE), (%a1) - nop - move.l #(CONFIG_SYS_SDRAM_EMOD), (%a1) - nop - - move.l #1000, %d0 -wait1000: - nop - subq.l #1, %d0 - bne wait1000 - - /* Issue PALL */ - move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) - nop - - /* Perform two refresh cycles */ - move.l #(CONFIG_SYS_SDRAM_CTRL + 4), %d0 - nop - move.l %d0, (%a2) - move.l %d0, (%a2) - nop - - move.l #(CONFIG_SYS_SDRAM_CTRL), %d0 - and.l #0x7FFFFFFF, %d0 - or.l #0x10000c00, %d0 - move.l %d0, (%a2) - nop - - /* - * DSPI Initialization - * a0 - general, sram - 0x80008000 - 32, see M52277EVB.h - * a1 - dspi status - * a2 - dtfr - * a3 - drfr - * a4 - Dst addr - */ - - /* Enable pins for DSPI mode - chip-selects are enabled later */ - move.l #0xFC0A4036, %a0 - move.b #0x3F, %d0 - move.b %d0, (%a0) - - /* DSPI CS */ -#ifdef CONFIG_SYS_DSPI_CS0 - move.b (%a0), %d0 - or.l #0xC0, %d0 - move.b %d0, (%a0) -#endif -#ifdef CONFIG_SYS_DSPI_CS2 - move.l #0xFC0A4037, %a0 - move.b (%a0), %d0 - or.l #0x10, %d0 - move.b %d0, (%a0) -#endif - nop - - /* Configure DSPI module */ - move.l #0xFC05C000, %a0 - move.l #0x80FF0C00, (%a0) /* Master, clear TX/RX FIFO */ - - move.l #0xFC05C00C, %a0 - move.l #0x3E000011, (%a0) - - move.l #0xFC05C034, %a2 /* dtfr */ - move.l #0xFC05C03B, %a3 /* drfr */ - - move.l #(ASM_SBF_IMG_HDR + 4), %a1 - move.l (%a1)+, %d5 - move.l (%a1), %a4 - - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_SBFHDR_DATA_OFFSET), %a0 - move.l #(CONFIG_SYS_SBFHDR_SIZE), %d4 - - move.l #0xFC05C02C, %a1 /* dspi status */ - - /* Issue commands and address */ - move.l #0x8004000B, %d2 /* Fast Read Cmd */ - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - move.l #0x80040000, %d2 /* Address byte 2 */ - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - move.l #0x80040000, %d2 /* Address byte 1 */ - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - move.l #0x80040000, %d2 /* Address byte 0 */ - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - move.l #0x80040000, %d2 /* Dummy Wr and Rd */ - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - /* Transfer serial boot header to sram */ -asm_dspi_rd_loop1: - move.l #0x80040000, %d2 - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - move.b %d1, (%a0) /* read, copy to dst */ - - add.l #1, %a0 /* inc dst by 1 */ - sub.l #1, %d4 /* dec cnt by 1 */ - bne asm_dspi_rd_loop1 - - /* Transfer u-boot from serial flash to memory */ -asm_dspi_rd_loop2: - move.l #0x80040000, %d2 - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - move.b %d1, (%a4) /* read, copy to dst */ - - add.l #1, %a4 /* inc dst by 1 */ - sub.l #1, %d5 /* dec cnt by 1 */ - bne asm_dspi_rd_loop2 - - move.l #0x00040000, %d2 /* Terminate */ - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - /* jump to memory and execute */ - move.l #(CONFIG_SYS_TEXT_BASE + 0x400), %a0 - move.l %a0, (%a1) - jmp (%a0) - -asm_dspi_wr_status: - move.l (%a1), %d0 /* status */ - and.l #0x0000F000, %d0 - cmp.l #0x00003000, %d0 - bgt asm_dspi_wr_status - - move.l %d2, (%a2) - rts - -asm_dspi_rd_status: - move.l (%a1), %d0 /* status */ - and.l #0x000000F0, %d0 - lsr.l #4, %d0 - cmp.l #0, %d0 - beq asm_dspi_rd_status - - move.b (%a3), %d1 - rts -#endif /* CONFIG_CF_SBF */ - -.text - . = 0x400 -.globl _start -_start: - nop - nop - move.w #0x2700,%sr /* Mask off Interrupt */ - - /* Set vector base register at the beginning of the Flash */ -#if defined(CONFIG_CF_SBF) - move.l #CONFIG_SYS_TEXT_BASE, %d0 - movec %d0, %VBR -#else - move.l #CONFIG_SYS_FLASH_BASE, %d0 - movec %d0, %VBR - - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 - movec %d0, %RAMBAR1 -#endif - - /* invalidate and disable cache */ - move.l #CF_CACR_CINV, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0, %d0 - movec %d0, %ACR0 - movec %d0, %ACR1 - - /* initialize general use internal ram */ - move.l #0, %d0 - move.l #(ICACHE_STATUS), %a1 /* icache */ - move.l #(DCACHE_STATUS), %a2 /* icache */ - move.l %d0, (%a1) - move.l %d0, (%a2) - - /* put relocation table address to a5 */ - move.l #__got_start, %a5 - - /* setup stack initially on top of internal static ram */ - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp - - /* - * if configured, malloc_f arena will be reserved first, - * then (and always) gd struct space will be reserved - */ - move.l %sp, -(%sp) - bsr board_init_f_alloc_reserve - - /* update stack and frame-pointers */ - move.l %d0, %sp - move.l %sp, %fp - - /* initialize reserved area */ - move.l %d0, -(%sp) - bsr board_init_f_init_reserve - - /* run low-level CPU init code (from flash) */ - bsr cpu_init_f - clr.l %sp@- - - /* run low-level board init code (from flash) */ - move.l #board_init_f, %a1 - jsr (%a1) - - /* board_init_f() does not return */ - -/******************************************************************************/ - -/* - * void relocate_code(addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. - * - * r3 = dest - * r4 = src - * r5 = length in bytes - * r6 = cachelinesize - */ -.globl relocate_code -relocate_code: - link.w %a6,#0 - move.l 8(%a6), %sp /* set new stack pointer */ - - move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ - move.l 16(%a6), %a0 /* Save copy of Destination Address */ - - move.l #CONFIG_SYS_MONITOR_BASE, %a1 - move.l #__init_end, %a2 - move.l %a0, %a3 - - /* copy the code to RAM */ -1: - move.l (%a1)+, (%a3)+ - cmp.l %a1,%a2 - bgt.s 1b - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - move.l %a0, %a1 - add.l #(in_ram - CONFIG_SYS_MONITOR_BASE), %a1 - jmp (%a1) - -in_ram: - -clear_bss: - /* - * Now clear BSS segment - */ - move.l %a0, %a1 - add.l #(_sbss - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %a0, %d1 - add.l #(_ebss - CONFIG_SYS_MONITOR_BASE),%d1 -6: - clr.l (%a1)+ - cmp.l %a1,%d1 - bgt.s 6b - - /* - * fix got table in RAM - */ - move.l %a0, %a1 - add.l #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %a1,%a5 /* fix got pointer register a5 */ - - move.l %a0, %a2 - add.l #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2 - -7: - move.l (%a1),%d1 - sub.l #_start,%d1 - add.l %a0,%d1 - move.l %d1,(%a1)+ - cmp.l %a2, %a1 - bne 7b - - /* calculate relative jump to board_init_r in ram */ - move.l %a0, %a1 - add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1 - - /* set parameters for board_init_r */ - move.l %a0,-(%sp) /* dest_addr */ - move.l %d0,-(%sp) /* gd */ - jsr (%a1) - -/******************************************************************************/ - -/* exception code */ -.globl _fault -_fault: - bra _fault - -.globl _exc_handler -_exc_handler: - SAVE_ALL - movel %sp,%sp@- - bsr exc_handler - addql #4,%sp - RESTORE_ALL - -.globl _int_handler -_int_handler: - SAVE_ALL - movel %sp,%sp@- - bsr int_handler - addql #4,%sp - RESTORE_ALL - -/******************************************************************************/ - -.align 4 diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 645f7cb0389..25e9968e4c6 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -19,7 +19,7 @@ _start: mts rslr, r8 #if defined(CONFIG_SPL_BUILD) - addi r1, r0, CONFIG_SPL_STACK_ADDR + addi r1, r0, CONFIG_SPL_STACK #else addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET #endif diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 6502aebd296..32c436f2bcb 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -3,9 +3,7 @@ head-y := arch/mips/cpu/start.o ifeq ($(CONFIG_SPL_BUILD),y) -ifneq ($(CONFIG_SPL_START_S_PATH),) -head-y := $(CONFIG_SPL_START_S_PATH:"%"=%)/start.o -endif +head-$(CONFIG_ARCH_JZ47XX) := arch/mips/mach-jz47xx/start.o endif libs-y += arch/mips/cpu/ diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S index 47251a5b92a..2acc21d5871 100644 --- a/arch/mips/cpu/start.S +++ b/arch/mips/cpu/start.S @@ -10,11 +10,7 @@ #include <asm/asm.h> #include <asm/regdef.h> #include <asm/mipsregs.h> - -#ifndef CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_SP_OFFSET) -#endif +#include <system-constants.h> #ifdef CONFIG_32BIT # define STATUS_SET 0 @@ -44,7 +40,7 @@ .macro setup_stack_gd li t0, -16 - PTR_LI t1, CONFIG_SYS_INIT_SP_ADDR + PTR_LI t1, SYS_INIT_SP_ADDR and sp, t1, t0 # force 16 byte alignment PTR_SUBU \ sp, sp, GD_SIZE # reserve space for gd diff --git a/arch/mips/mach-mtmips/mt7628/lowlevel_init.S b/arch/mips/mach-mtmips/mt7628/lowlevel_init.S index 83cd8fa9b6b..cb369fbc275 100644 --- a/arch/mips/mach-mtmips/mt7628/lowlevel_init.S +++ b/arch/mips/mach-mtmips/mt7628/lowlevel_init.S @@ -12,16 +12,11 @@ #include <asm/mipsregs.h> #include <asm/addrspace.h> #include <asm/asm.h> +#include <system-constants.h> #include "mt7628.h" -/* Set temporary stack address range */ -#ifndef CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_SP_OFFSET) -#endif - #define CACHE_STACK_SIZE 0x4000 -#define CACHE_STACK_BASE (CONFIG_SYS_INIT_SP_ADDR - CACHE_STACK_SIZE) +#define CACHE_STACK_BASE (SYS_INIT_SP_ADDR - CACHE_STACK_SIZE) #define DELAY_USEC(us) ((58 * (us)) / 3) @@ -134,7 +129,7 @@ NESTED(lowlevel_init, 0, ra) #if CONFIG_IS_ENABLED(INIT_STACK_WITHOUT_MALLOC_F) /* Set malloc base */ - li t0, (CONFIG_SYS_INIT_SP_ADDR + 15) & (~15) + li t0, (SYS_INIT_SP_ADDR + 15) & (~15) PTR_S t0, GD_MALLOC_BASE(k0) # gd->malloc_base offset #endif diff --git a/arch/powerpc/cpu/mpc83xx/Makefile b/arch/powerpc/cpu/mpc83xx/Makefile index 7c4ef7657e5..1255f533e34 100644 --- a/arch/powerpc/cpu/mpc83xx/Makefile +++ b/arch/powerpc/cpu/mpc83xx/Makefile @@ -8,10 +8,12 @@ MINIMAL= ifdef CONFIG_SPL_BUILD +ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y endif endif +endif extra-y = start.o diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index e6dcb8a3350..e3e1bfd65a5 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -6,6 +6,7 @@ #include <common.h> #include <asm-offsets.h> #include <mpc83xx.h> +#include <system-constants.h> #include <ioports.h> #include <asm/global_data.h> #include <asm/io.h> @@ -138,7 +139,7 @@ void cpu_init_f (volatile immap_t * im) 0; /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + gd = (gd_t *)SYS_INIT_SP_ADDR; /* global data region was cleared in start.S */ diff --git a/arch/powerpc/cpu/mpc83xx/spl_minimal.c b/arch/powerpc/cpu/mpc83xx/spl_minimal.c index 11b1e613fb9..d8f6cfe2b4a 100644 --- a/arch/powerpc/cpu/mpc83xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc83xx/spl_minimal.c @@ -7,6 +7,7 @@ #include <asm-offsets.h> #include <clock_legacy.h> #include <mpc83xx.h> +#include <system-constants.h> #include <time.h> #include <asm/global_data.h> @@ -25,7 +26,7 @@ DECLARE_GLOBAL_DATA_PTR; void cpu_init_f (volatile immap_t * im) { /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + gd = (gd_t *)SYS_INIT_SP_ADDR; /* global data region was cleared in start.S */ diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index 0944d191057..8a351b927c0 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -13,6 +13,7 @@ #include <asm-offsets.h> #include <config.h> #include <mpc83xx.h> +#include <system-constants.h> #include <ppc_asm.tmpl> #include <ppc_defs.h> @@ -39,7 +40,7 @@ #endif #if defined(CONFIG_NAND_SPL) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)) + (defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)) #define MINIMAL_SPL #endif @@ -229,8 +230,8 @@ in_flash: /* set up the stack pointer in our newly created * cache-ram; use r3 to keep the new SP for now to * avoid overiding the SP it uselessly */ - lis r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h - ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l + lis r3, SYS_INIT_SP_ADDR@h + ori r3, r3, SYS_INIT_SP_ADDR@l /* r4 = end of GD area */ addi r4, r3, GENERATED_GBL_DATA_SIZE diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index c32cde04e16..f3ee7d34949 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -9,10 +9,12 @@ MINIMAL= ifdef CONFIG_SPL_BUILD +ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y endif endif +endif extra-y = start.o resetvec.o diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c index 5a0d33b1b3d..1bba216371b 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -4,6 +4,7 @@ */ #include <common.h> +#include <system-constants.h> #include <asm-offsets.h> #include <asm/global_data.h> #include <asm/processor.h> @@ -94,7 +95,7 @@ void cpu_init_early_f(void *fdt) #endif /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + gd = (gd_t *)SYS_INIT_SP_ADDR; /* gd area was zeroed during startup */ @@ -177,7 +178,7 @@ void cpu_init_early_f(void *fdt) invalidate_tlb(1); #if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && \ - !(defined(CONFIG_SPL_INIT_MINIMAL) && defined(CONFIG_SPL_BUILD)) && \ + !(CONFIG_IS_ENABLED(INIT_MINIMAL) && defined(CONFIG_SPL_BUILD)) && \ !defined(CONFIG_NAND_SPL) disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB); #endif diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 2b2ad973599..9a28269020d 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -14,6 +14,7 @@ #include <asm-offsets.h> #include <config.h> #include <mpc85xx.h> +#include <system-constants.h> #include <ppc_asm.tmpl> #include <ppc_defs.h> @@ -27,7 +28,7 @@ #define LAW_EN 0x80000000 #if defined(CONFIG_NAND_SPL) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)) + (defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)) #define MINIMAL_SPL #endif @@ -1160,8 +1161,8 @@ _start_cont: bne 1b #if CONFIG_VAL(SYS_MALLOC_F_LEN) - lis r4,(CONFIG_SYS_INIT_RAM_ADDR)@h - ori r4,r4,(CONFIG_SYS_GBL_DATA_OFFSET)@l + lis r4,SYS_INIT_SP_ADDR@h + ori r4,r4,SYS_INIT_SP_ADDR@l addi r3,r3,16 /* Pre-relocation malloc area */ stw r3,GD_MALLOC_BASE(r4) diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index 550d45da0ef..4f6778c720d 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -44,7 +44,7 @@ __weak void init_tlbs(void) } #if !defined(CONFIG_NAND_SPL) && \ - (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) + (!defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, phys_addr_t *rpn) { diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index bec891d5401..e3a536d4f8c 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -5,10 +5,12 @@ MINIMAL= ifdef CONFIG_SPL_BUILD +ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y endif endif +endif ifdef MINIMAL diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c index cf03f410190..713ff172bce 100644 --- a/arch/powerpc/cpu/mpc8xxx/law.c +++ b/arch/powerpc/cpu/mpc8xxx/law.c @@ -79,7 +79,7 @@ void disable_law(u8 idx) } #if !defined(CONFIG_NAND_SPL) && \ - (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) + (!defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) static int get_law_entry(u8 i, struct law_entry *e) { u32 lawar; @@ -110,7 +110,7 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) } #if !defined(CONFIG_NAND_SPL) && \ - (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) + (!defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { u32 idx; diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 2782740bf5b..066d7f408e0 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -10,10 +10,12 @@ lib-$(CONFIG_USE_PRIVATE_LIBGCC) += _ashldi3.o _ashrdi3.o _lshrdi3.o MINIMAL= ifdef CONFIG_SPL_BUILD +ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y endif endif +endif obj-y += bdinfo.o diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index 76850ec9be2..f2ef5564a15 100644 --- a/arch/riscv/cpu/start.S +++ b/arch/riscv/cpu/start.S @@ -13,6 +13,7 @@ #include <config.h> #include <common.h> #include <elf.h> +#include <system-constants.h> #include <asm/encoding.h> #include <generated/asm-offsets.h> @@ -94,7 +95,7 @@ call_board_init_f: #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) li t1, CONFIG_SPL_STACK #else - li t1, CONFIG_SYS_INIT_SP_ADDR + li t1, SYS_INIT_SP_ADDR #endif and sp, t1, t0 /* force 16 byte alignment */ diff --git a/arch/sandbox/include/asm/spl.h b/arch/sandbox/include/asm/spl.h index d25dc7c82a0..bf5a585622b 100644 --- a/arch/sandbox/include/asm/spl.h +++ b/arch/sandbox/include/asm/spl.h @@ -6,8 +6,6 @@ #ifndef __asm_spl_h #define __asm_spl_h -#define CONFIG_SPL_BOARD_LOAD_IMAGE - enum { BOOT_DEVICE_BOARD, }; diff --git a/arch/x86/include/asm/spl.h b/arch/x86/include/asm/spl.h index cc6cac08f23..483cf702cbb 100644 --- a/arch/x86/include/asm/spl.h +++ b/arch/x86/include/asm/spl.h @@ -7,8 +7,6 @@ #ifndef __asm_spl_h #define __asm_spl_h -#define CONFIG_SPL_BOARD_LOAD_IMAGE - enum { BOOT_DEVICE_SPI_MMAP = 10, BOOT_DEVICE_FAST_SPI, diff --git a/board/AndesTech/ax25-ae350/Kconfig b/board/AndesTech/ax25-ae350/Kconfig index 91eec35f474..36b67f0b524 100644 --- a/board/AndesTech/ax25-ae350/Kconfig +++ b/board/AndesTech/ax25-ae350/Kconfig @@ -27,6 +27,10 @@ config SPL_TEXT_BASE config SPL_OPENSBI_LOAD_ADDR default 0x01000000 +config SYS_FDT_BASE + hex + default 0x800f0000 if OF_SEPARATE + config BOARD_SPECIFIC_OPTIONS # dummy def_bool y select RISCV_NDS diff --git a/board/congatec/common/Makefile b/board/congatec/common/Makefile index d4ddfbf9716..2db0fc1ae5c 100644 --- a/board/congatec/common/Makefile +++ b/board/congatec/common/Makefile @@ -8,10 +8,12 @@ MINIMAL= ifdef CONFIG_SPL_BUILD +ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y endif endif +endif ifdef MINIMAL # necessary to create built-in.o diff --git a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds index 8f04911306b..f6b9de29084 100644 --- a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds +++ b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds @@ -11,7 +11,7 @@ MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,\ LENGTH = CONFIG_SPL_MAX_FOOTPRINT } MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ - LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + LENGTH = 0x1080000 } OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") OUTPUT_ARCH(arm) diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 4df484935f4..4214c6e46e4 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -6,10 +6,12 @@ MINIMAL= ifdef CONFIG_SPL_BUILD +ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y endif endif +endif ifdef MINIMAL # necessary to create built-in.o diff --git a/board/freescale/p1010rdb/Makefile b/board/freescale/p1010rdb/Makefile index 36b34c70aa8..a00806e6aae 100644 --- a/board/freescale/p1010rdb/Makefile +++ b/board/freescale/p1010rdb/Makefile @@ -5,10 +5,12 @@ MINIMAL= ifdef CONFIG_SPL_BUILD +ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y endif endif +endif ifdef MINIMAL obj-y += spl_minimal.o diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c index 7eaa2047fac..88695002deb 100644 --- a/board/freescale/p1010rdb/spl.c +++ b/board/freescale/p1010rdb/spl.c @@ -57,24 +57,24 @@ void board_init_f(ulong bootflag) /* NOTE - code has to be copied out of NAND buffer before * other blocks can be read. */ - relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); + relocate_code(CONFIG_VAL(RELOC_STACK), 0, CONFIG_SPL_RELOC_TEXT_BASE); } void board_init_r(gd_t *gd, ulong dest_addr) { /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *)CONFIG_SPL_GD_ADDR; + gd = (gd_t *)CONFIG_VAL(GD_ADDR); struct bd_info *bd; memset(gd, 0, sizeof(gd_t)); - bd = (struct bd_info *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); + bd = (struct bd_info *)(CONFIG_VAL(GD_ADDR) + sizeof(gd_t)); memset(bd, 0, sizeof(struct bd_info)); gd->bd = bd; arch_cpu_init(); get_clocks(); - mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, - CONFIG_SPL_RELOC_MALLOC_SIZE); + mem_malloc_init(CONFIG_VAL(RELOC_MALLOC_ADDR), + CONFIG_VAL(RELOC_MALLOC_SIZE)); gd->flags |= GD_FLG_FULL_MALLOC_INIT; #ifndef CONFIG_SPL_NAND_BOOT diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c index 04faefe994d..7992666e930 100644 --- a/board/freescale/p1010rdb/tlb.c +++ b/board/freescale/p1010rdb/tlb.c @@ -72,8 +72,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_1M, 1), -#if defined(CONFIG_SYS_RAMBOOT) || \ - (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR)) +#if defined(CONFIG_SYS_RAMBOOT) || !CONFIG_IS_ENABLED(COMMON_INIT_DDR) SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 8, BOOKE_PAGESZ_1G, 1), diff --git a/board/freescale/p1_p2_rdb_pc/Makefile b/board/freescale/p1_p2_rdb_pc/Makefile index a7736d8332d..cbdb2507e83 100644 --- a/board/freescale/p1_p2_rdb_pc/Makefile +++ b/board/freescale/p1_p2_rdb_pc/Makefile @@ -5,10 +5,12 @@ MINIMAL= ifdef CONFIG_SPL_BUILD +ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y endif endif +endif ifdef MINIMAL obj-y += spl_minimal.o diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c index 22156f2824e..b60027ebd9a 100644 --- a/board/freescale/p1_p2_rdb_pc/spl.c +++ b/board/freescale/p1_p2_rdb_pc/spl.c @@ -63,24 +63,24 @@ void board_init_f(ulong bootflag) /* NOTE - code has to be copied out of NAND buffer before * other blocks can be read. */ - relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); + relocate_code(CONFIG_VAL(RELOC_STACK), 0, CONFIG_SPL_RELOC_TEXT_BASE); } void board_init_r(gd_t *gd, ulong dest_addr) { /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *)CONFIG_SPL_GD_ADDR; + gd = (gd_t *)CONFIG_VAL(GD_ADDR); struct bd_info *bd; memset(gd, 0, sizeof(gd_t)); - bd = (struct bd_info *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); + bd = (struct bd_info *)(CONFIG_VAL(GD_ADDR) + sizeof(gd_t)); memset(bd, 0, sizeof(struct bd_info)); gd->bd = bd; arch_cpu_init(); get_clocks(); - mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, - CONFIG_SPL_RELOC_MALLOC_SIZE); + mem_malloc_init(CONFIG_VAL(RELOC_MALLOC_ADDR), + CONFIG_VAL(RELOC_MALLOC_SIZE)); gd->flags |= GD_FLG_FULL_MALLOC_INIT; #ifdef CONFIG_SPL_ENV_SUPPORT diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c index 5931ec650bd..6ded38ac683 100644 --- a/board/freescale/p1_p2_rdb_pc/tlb.c +++ b/board/freescale/p1_p2_rdb_pc/tlb.c @@ -77,8 +77,7 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 7, BOOKE_PAGESZ_1M, 1), #endif -#if defined(CONFIG_SYS_RAMBOOT) || \ - (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR)) +#if defined(CONFIG_SYS_RAMBOOT) || !CONFIG_IS_ENABLED(COMMON_INIT_DDR) /* **M** - 1G DDR for eSDHC/eSPI/NAND boot */ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig index 863c07db47d..f22faee0ee4 100644 --- a/board/keymile/Kconfig +++ b/board/keymile/Kconfig @@ -11,6 +11,9 @@ if VENDOR_KM menu "KM Board Setup" +config HUSH_INIT_VAR + def_bool y + config KM_PNVRAM hex "Pseudo RAM" default 0x80000 diff --git a/board/synopsys/iot_devkit/u-boot.lds b/board/synopsys/iot_devkit/u-boot.lds index d0831687055..5aff100315e 100644 --- a/board/synopsys/iot_devkit/u-boot.lds +++ b/board/synopsys/iot_devkit/u-boot.lds @@ -5,6 +5,7 @@ */ #include <config.h> +#include <system-constants.h> MEMORY { ROM : ORIGIN = ROM_BASE, LENGTH = ROM_SIZE diff --git a/boot/image-board.c b/boot/image-board.c index 0d2e0fc9692..cfc1c658e3a 100644 --- a/boot/image-board.c +++ b/boot/image-board.c @@ -21,10 +21,6 @@ #include <asm/cache.h> #include <asm/global_data.h> -#ifndef CONFIG_SYS_BARGSIZE -#define CONFIG_SYS_BARGSIZE 512 -#endif - DECLARE_GLOBAL_DATA_PTR; #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT) @@ -827,6 +823,7 @@ int boot_get_loadable(int argc, char *const argv[], bootm_headers_t *images, return 0; } +#ifdef CONFIG_SYS_BOOT_GET_CMDLINE /** * boot_get_cmdline - allocate and initialize kernel cmdline * @lmb: pointer to lmb handle, will be used for memory mgmt @@ -900,6 +897,7 @@ int boot_get_kbd(struct lmb *lmb, struct bd_info **kbd) return 0; } +#endif int image_setup_linux(bootm_headers_t *images) { diff --git a/cmd/Kconfig b/cmd/Kconfig index 09193b61b95..06ec81007ad 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -71,6 +71,23 @@ config SYS_PROMPT_HUSH_PS2 printed when the command interpreter needs more input to complete a command. Usually "> ". +config SYS_MAXARGS + int "Maximum number arguments accepted by commands" + default 16 + +config SYS_CBSIZE + int "Console input buffer size" + default 2048 if ARCH_TEGRA || ARCH_VERSAL || ARCH_ZYNQ || ARCH_ZYNQMP || \ + RCAR_GEN3 || TARGET_SOCFPGA_SOC64 + default 512 if ARCH_MX5 || ARCH_MX6 || ARCH_MX7 || FSL_LSCH2 || \ + FSL_LSCH3 || X86 + default 256 if M68K || PPC + default 1024 + +config SYS_PBSIZE + int "Buffer size for console output" + default 1044 + config SYS_XTRACE bool "Command execution tracer" depends on CMDLINE diff --git a/common/Kconfig b/common/Kconfig index a96842a5c11..84db2e43f15 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -659,6 +659,18 @@ config MISC_INIT_R help Enabling this option calls 'misc_init_r' function +config SYS_MALLOC_BOOTPARAMS + bool "Malloc a buffer to use for bootparams" + help + In some cases rather than using a known location to store the + bi_boot_params portion of gd we need to allocate it from our malloc pool. + +config SYS_BOOTPARAMS_LEN + hex "Size of the bootparam buffer to malloc in bytes" + depends on SYS_MALLOC_BOOTPARAMS + default 0x20000 if MIPS || RCAR_GEN3 + default 0x10000 + config ID_EEPROM bool "Enable I2C connected system identifier EEPROM" help diff --git a/common/board_r.c b/common/board_r.c index 6f4aca2077d..22b5deaa8c2 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -457,7 +457,7 @@ static int initr_env(void) return 0; } -#ifdef CONFIG_SYS_BOOTPARAMS_LEN +#ifdef CONFIG_SYS_MALLOC_BOOTPARAMS static int initr_malloc_bootparams(void) { gd->bd->bi_boot_params = (ulong)malloc(CONFIG_SYS_BOOTPARAMS_LEN); @@ -713,7 +713,7 @@ static init_fnc_t init_sequence_r[] = { initr_pvblock, #endif initr_env, -#ifdef CONFIG_SYS_BOOTPARAMS_LEN +#ifdef CONFIG_SYS_MALLOC_BOOTPARAMS initr_malloc_bootparams, #endif INIT_FUNC_WATCHDOG_RESET diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 50ff113cab2..2ad2351c6eb 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1,5 +1,3 @@ -menu "SPL / TPL / VPL" - config SUPPORT_SPL bool @@ -13,15 +11,16 @@ config SPL_DFU_NO_RESET bool config SPL - bool + bool "Enable SPL" depends on SUPPORT_SPL - prompt "Enable SPL" help If you want to build SPL as well as the normal image, say Y. +menu "SPL configuration options" + depends on SPL + config SPL_FRAMEWORK bool "Support SPL based upon the common SPL framework" - depends on SPL default y help Enable the SPL framework under common/spl/. This framework @@ -39,7 +38,6 @@ config SPL_FRAMEWORK_BOARD_INIT_F config SPL_SIZE_LIMIT hex "Maximum size of SPL image" - depends on SPL default 0x11000 if ARCH_MX6 && !MX6_OCRAM_256KB default 0x31000 if ARCH_MX6 && MX6_OCRAM_256KB default 0x0 @@ -75,6 +73,89 @@ config SPL_SIZE_LIMIT_PROVIDE_STACK of SRAM available for SPL when the stack required before reolcation uses this SRAM, too. +config SPL_MAX_SIZE + hex "Maximum size of the SPL image, excluding BSS" + default 0x30000 if ARCH_MX6 && MX6_OCRAM_256KB + default 0x1b000 if AM33XX && !TI_SECURE_DEVICE + default 0x10000 if ARCH_MX6 && !MX6_OCRAM_256KB + default 0x7fa0 if SUNXI_SRAM_ADDRESS = 0x10000 + default 0x7fa0 if SUNXI_SRAM_ADDRESS = 0x20000 && !MACH_SUN50I_H616 + default 0x7000 if RCAR_GEN3 + default 0x5fa0 if SUNXI_SRAM_ADDRESS = 0x0 + default 0x0 + help + Maximum size of the SPL image (text, data, rodata, and linker lists + sections), BSS excluded. When defined, the linker checks that the + actual size does not exceed it. + +config SPL_PAD_TO + hex "Offset to which the SPL should be padded before appending the SPL payload" + default 0x31000 if ARCH_MX6 && MX6_OCRAM_256KB + default 0x11000 if ARCH_MX7 || (ARCH_MX6 && !MX6_OCRAM_256KB) + default 0x10000 if ARCH_KEYSTONE + default 0x8000 if ARCH_SUNXI && !MACH_SUN50I_H616 + default TPL_MAX_SIZE if TPL_MAX_SIZE > SPL_MAX_SIZE + default SPL_MAX_SIZE + help + Image offset to which the SPL should be padded before appending the + SPL payload. By default, this is defined as CONFIG_SPL_MAX_SIZE, or 0 if + CONFIG_SPL_MAX_SIZE is undefined. CONFIG_SPL_PAD_TO must be either + 0, meaning to append the SPL payload without any padding, or >= + CONFIG_SPL_MAX_SIZE. + +config SPL_HAS_BSS_LINKER_SECTION + depends on SPL_FRAMEWORK + bool "Use a specific address for the BSS via the linker script" + default y if ARCH_SUNXI || ARCH_MX6 || ARCH_OMAP2PLUS || MIPS || RISCV + +config SPL_BSS_START_ADDR + hex "Link address for the BSS within the SPL binary" + depends on SPL_HAS_BSS_LINKER_SECTION + default 0x88200000 if (ARCH_MX6 && (MX6SX || MX6SL || MX6UL || MX6ULL)) || ARCH_MX7 + default 0x18200000 if ARCH_MX6 && !(MX6SX || MX6SL || MX6UL || MX6ULL) + default 0x80a00000 if ARCH_OMAP2PLUS + default 0x81f80000 if ARCH_SUNXI && MACH_SUNIV + default 0x4ff80000 if ARCH_SUNXI && !(MACH_SUN9I || MACH_SUNIV) + default 0x2ff80000 if ARCH_SUNXI && MACH_SUN9I + +choice + prompt "Enforce SPL BSS limit" + depends on !PPC + default SPL_BSS_LIMIT + help + In some platforms we only want to enforce a limit on the size of the + BSS in memory. On other platforms we need to enforce a limit on the + whole of the memory allocation as we're strictly limited to a small + typically non-DRAM location. Finally, other platforms do not enforce + a memory limit within SPL. + +config SPL_NO_BSS_LIMIT + bool "Do not enforce a build time limit on the size of the BSS" + +config SPL_BSS_LIMIT + bool "Enforce a limit on the size of the BSS only" + +config SPL_FOOTPRINT_LIMIT + bool "Enforce a limit on the whole of memory allocated to SPL, BSS included" + +endchoice + +config SPL_BSS_MAX_SIZE + hex "Maximum size in memory allocated to the SPL BSS" + depends on SPL_BSS_LIMIT + default 0x100000 if ARCH_MX6 || RISCV + default 0x80000 if ARCH_OMAP2PLUS || ARCH_SUNXI + help + When non-zero, the linker checks that the actual memory used by SPL + from __bss_start to __bss_end does not exceed it. + +config SPL_MAX_FOOTPRINT + hex "Maximum size in memory allocated to the SPL, BSS included" + depends on SPL_FOOTPRINT_LIMIT + help + When non-zero, the linker checks that the actual memory used by SPL + from _start to __bss_end does not exceed it. + config SPL_SYS_STACK_F_CHECK_BYTE hex default 0xaa @@ -116,33 +197,11 @@ config SPL_BINMAN_SYMBOLS For this to work, you must have a U-Boot image in the binman image, so binman can update SPL with the location of it. -menu "PowerPC and LayerScape SPL Boot options" - -config SPL_NAND_BOOT - bool "Load SPL from NAND flash" - depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK) - -config SPL_MMC_BOOT - bool "Load SPL from SD Card / eMMC" - depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK) - -config SPL_SPI_BOOT - bool "Load SPL from SPI flash" - depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK) - -config SPL_FSL_PBL - bool "Create SPL in Freescale PBI format" - depends on (PPC || ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) && \ - SUPPORT_SPL - help - Create boot binary having SPL binary in PBI format concatenated with - u-boot binary. - -endmenu +source "common/spl/Kconfig.nxp" config HANDOFF bool "Pass hand-off information from SPL to U-Boot proper" - depends on SPL && BLOBLIST + depends on BLOBLIST help It is useful to be able to pass information from SPL to U-Boot proper to preserve state that is known in SPL and is needed in U-Boot. @@ -150,8 +209,6 @@ config HANDOFF in boot. It is available in gd->handoff. The state state is set up in SPL (or TPL if that is being used). -if SPL - config SPL_HANDOFF bool "Pass hand-off information from SPL to U-Boot proper" depends on HANDOFF && SPL_BLOBLIST @@ -189,13 +246,6 @@ config SPL_BOARD_INIT spl_board_init() from board_init_r(). This function should be provided by the board. -config VPL_BOARD_INIT - bool "Call board-specific initialization in VPL" - help - If this option is enabled, U-Boot will call the function - spl_board_init() from board_init_r(). This function should be - provided by the board. - config SPL_BOOTROM_SUPPORT bool "Support returning to the BOOTROM" help @@ -246,23 +296,33 @@ config SPL_LEGACY_IMAGE_CRC_CHECK are correct, without further integrity checks. config SPL_SYS_MALLOC_SIMPLE - bool - prompt "Only use malloc_simple functions in the SPL" + bool "Only use malloc_simple functions in the SPL" help Say Y here to only use the *_simple malloc functions from malloc_simple.c, rather then using the versions from dlmalloc.c; this will make the SPL binary smaller at the cost of more heap usage as the *_simple malloc functions do not re-use free-ed mem. -config TPL_SYS_MALLOC_SIMPLE - bool - prompt "Only use malloc_simple functions in the TPL" - depends on TPL +config SPL_SHARES_INIT_SP_ADDR + bool "SPL and U-Boot use the same initial stack pointer location" + depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && SPL_FRAMEWORK + default n if ARCH_SUNXI || ARCH_MX6 || ARCH_MX7 + default y help - Say Y here to only use the *_simple malloc functions from - malloc_simple.c, rather then using the versions from dlmalloc.c; - this will make the TPL binary smaller at the cost of more heap - usage as the *_simple malloc functions do not re-use free-ed mem. + In many cases, we can use the same initial stack pointer address for + both SPL and U-Boot itself. If you need to specify a different address + however, say N here and then set a different value in CONFIG_SPL_STACK. + +config SPL_STACK + hex "Initial stack pointer location" + depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && SPL_FRAMEWORK + depends on !SPL_SHARES_INIT_SP_ADDR + default 0x946bb8 if ARCH_MX7 + default 0x93ffb8 if ARCH_MX6 && MX6_OCRAM_256KB + default 0x91ffb8 if ARCH_MX6 && !MX6_OCRAM_256KB + help + Address of the start of the stack SPL will use before SDRAM is + initialized. config SPL_STACK_R bool "Enable SDRAM location for SPL stack" @@ -301,6 +361,23 @@ config SPL_SEPARATE_BSS location is used. Normally we put the device tree at the end of BSS but with this option enabled, it goes at _image_binary_end. +config SYS_SPL_MALLOC + bool "Enable malloc pool in SPL" + depends on SPL_FRAMEWORK + +config HAS_CUSTOM_SPL_MALLOC_START + bool "For the SPL malloc pool, define a custom starting address" + depends on SYS_SPL_MALLOC + +config CUSTOM_SYS_SPL_MALLOC_ADDR + hex "SPL malloc addr" + depends on HAS_CUSTOM_SPL_MALLOC_START + +config SYS_SPL_MALLOC_SIZE + hex "Size of the SPL malloc pool" + depends on SYS_SPL_MALLOC + default 0x100000 + config SPL_READ_ONLY bool depends on SPL_OF_PLATDATA @@ -314,16 +391,6 @@ config SPL_READ_ONLY writeable memory) of anything it wants to modify, such as device-private data. -config TPL_SEPARATE_BSS - bool "BSS section is in a different memory region from text" - default y if SPL_SEPARATE_BSS - help - Some platforms need a large BSS region in TPL and can provide this - because RAM is already set up. In this case BSS can be moved to RAM. - This option should then be enabled so that the correct device tree - location is used. Normally we put the device tree at the end of BSS - but with this option enabled, it goes at _image_binary_end. - config SPL_BANNER_PRINT bool "Enable output of the SPL banner 'U-Boot SPL ...'" default y @@ -332,15 +399,6 @@ config SPL_BANNER_PRINT info. Disabling this option could be useful to reduce SPL boot time (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). -config TPL_BANNER_PRINT - bool "Enable output of the TPL banner 'U-Boot TPL ...'" - depends on TPL - default y - help - If this option is enabled, TPL will print the banner with version - info. Disabling this option could be useful to reduce TPL boot time - (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). - config SPL_EARLY_BSS depends on ARM && !ARM64 bool "Allows initializing BSS early before entering board_init_f" @@ -591,6 +649,31 @@ config SPL_FS_FAT filesystem from within SPL. Support for the underlying block device (e.g. MMC or USB) must be enabled separately. +config SPL_FS_LOAD_PAYLOAD_NAME + string "File to load for U-Boot from the filesystem" + depends on SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS + default "tispl.bin" if SYS_K3_SPL_ATF + default "u-boot.itb" if SPL_LOAD_FIT + default "u-boot.img" + help + Filename to read to load U-Boot when reading from filesystem. + +config SPL_FS_LOAD_KERNEL_NAME + string "File to load for the OS kernel from the filesystem" + depends on (SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS) && SPL_OS_BOOT + default "uImage" + help + Filename to read to load for the OS kernel when reading from the + filesystem. + +config SPL_FS_LOAD_ARGS_NAME + string "File to load for the OS kernel argument parameters from the filesystem" + depends on (SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS) && SPL_OS_BOOT + default "args" + help + Filename to read to load for the OS kernel argument parameters from + the filesystem. + config SPL_FAT_WRITE bool "Support write for FAT filesystems" help @@ -667,6 +750,7 @@ config SPL_LIBGENERIC_SUPPORT config SPL_DM_MAILBOX bool "Support Mailbox" + depends on SPL_DM help Enable support for Mailbox within SPL. This enable the inter processor communication protocols tobe used within SPL. Enable @@ -749,13 +833,23 @@ config SPL_NAND_SUPPORT This enables the drivers in drivers/mtd/nand/raw as part of an SPL build. +config SPL_NAND_RAW_ONLY + bool "Support to boot only raw u-boot.bin images" + depends on SPL_NAND_SUPPORT + help + Use this only if you need to save space. + config SPL_NAND_DRIVERS bool "Use standard NAND driver" help SPL uses normal NAND drivers, not minimal drivers. config SPL_NAND_ECC - bool "Include standard software ECC in the SPL" + bool "Include standard ECC in SPL" + +config SPL_NAND_SOFTECC + bool "Use software ECC in SPL" + depends on SPL_NAND_ECC config SPL_NAND_SIMPLE bool "Support simple NAND drivers in SPL" @@ -781,19 +875,9 @@ config SPL_UBI Enable support for loading payloads from UBI. See README.ubispl for more info. -if SPL_DM -config SPL_DM_SPI - bool "Support SPI DM drivers in SPL" - help - Enable support for SPI DM drivers in SPL. - -config SPL_DM_SPI_FLASH - bool "Support SPI DM FLASH drivers in SPL" - help - Enable support for SPI DM flash drivers in SPL. +menu "UBI configuration for SPL" + depends on SPL_UBI -endif -if SPL_UBI config SPL_UBI_LOAD_BY_VOLNAME bool "Support loading volumes by name" help @@ -803,58 +887,49 @@ config SPL_UBI_LOAD_BY_VOLNAME config SPL_UBI_MAX_VOL_LEBS int "Maximum number of LEBs per volume" - depends on SPL_UBI help The maximum number of logical eraseblocks which a static volume to load can contain. Used for sizing the scan data structure. config SPL_UBI_MAX_PEB_SIZE int "Maximum PEB size" - depends on SPL_UBI help The maximum physical erase block size. config SPL_UBI_MAX_PEBS int "Maximum number of PEBs" - depends on SPL_UBI help The maximum physical erase block size. If not overridden by board code, this value will be used as the actual number of PEBs. config SPL_UBI_PEB_OFFSET int "Offset to first UBI PEB" - depends on SPL_UBI help The offset in number of PEBs from the start of flash to the first PEB part of the UBI image. config SPL_UBI_VID_OFFSET int "Offset to VID header" - depends on SPL_UBI config SPL_UBI_LEB_START int "Offset to LEB in PEB" - depends on SPL_UBI help The offset in bytes to the LEB within a PEB. config SPL_UBI_INFO_ADDR hex "Address to place UBI scan info" - depends on SPL_UBI help Address for ubispl to place the scan info. Read README.ubispl to determine the required size config SPL_UBI_VOL_IDS int "Maximum volume id" - depends on SPL_UBI help The maximum volume id which can be loaded. Used for sizing the scan data structure. config SPL_UBI_LOAD_MONITOR_ID int "id of U-Boot volume" - depends on SPL_UBI help The UBI volume id from which to load U-Boot @@ -866,13 +941,13 @@ config SPL_UBI_LOAD_MONITOR_VOLNAME config SPL_UBI_LOAD_KERNEL_ID int "id of kernel volume" - depends on SPL_OS_BOOT && SPL_UBI + depends on SPL_OS_BOOT help The UBI volume id from which to load the kernel config SPL_UBI_LOAD_ARGS_ID int "id of kernel args volume" - depends on SPL_OS_BOOT && SPL_UBI + depends on SPL_OS_BOOT help The UBI volume id from which to load the device tree @@ -882,7 +957,19 @@ config UBI_SPL_SILENCE_MSG Disable messages from UBI SPL. This leaves warnings and errors enabled. -endif # if SPL_UBI +endmenu + +config SPL_DM_SPI + bool "Support SPI DM drivers in SPL" + depends on SPL_DM + help + Enable support for SPI DM drivers in SPL. + +config SPL_DM_SPI_FLASH + bool "Support SPI DM FLASH drivers in SPL" + depends on SPL_DM + help + Enable support for SPI DM flash drivers in SPL. config SPL_NET bool "Support networking" @@ -893,19 +980,19 @@ config SPL_NET the network stack uses a number of environment variables. See also SPL_ETH. -if SPL_NET config SPL_NET_VCI_STRING string "BOOTP Vendor Class Identifier string sent by SPL" + depends on SPL_NET help As defined by RFC 2132 the vendor class identifier field can be sent by the client to identify the vendor type and configuration of a client. This is often used in practice to allow for the DHCP server to specify different files to load depending on if the ROM, SPL or U-Boot itself makes the request -endif # if SPL_NET config SPL_NO_CPU_SUPPORT - bool "Drop CPU code in SPL" + def_bool y + depends on (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK help This is specific to the ARM926EJ-S CPU. It disables the standard start.S start-up code, presumably so that a replacement can be @@ -922,7 +1009,6 @@ config SPL_NOR_SUPPORT config SPL_XIP_SUPPORT bool "Support XIP" - depends on SPL help Enable support for execute in place of U-Boot or kernel image. There is no need to copy image from flash to ram if flash supports execute @@ -944,16 +1030,25 @@ config SPL_OS_BOOT Enable booting directly to an OS from SPL. for more info read doc/README.falcon -if SPL_OS_BOOT +config SYS_SPL_ARGS_ADDR + hex "Address in memory to load 'args' file for Falcon Mode to" + depends on SPL_OS_BOOT + default 0x88000000 if ARCH_OMAP2PLUS + help + Address in memory where the 'args' file, typically a device tree + will be loaded in to memory. + +config SYS_NAND_SPL_KERNEL_OFFS + hex "Address in memory to load the OS file for Falcon mode to" + depends on SPL_OS_BOOT && SPL_NAND_SUPPORT + config SYS_OS_BASE hex "addr, where OS is found" - depends on SPL_NOR_SUPPORT + depends on SPL_OS_BOOT && SPL_NOR_SUPPORT help Specify the address, where the OS image is found, which gets booted. -endif # SPL_OS_BOOT - config SPL_FALCON_BOOT_MMCSD bool "Enable Falcon boot from MMC or SD media" depends on SPL_OS_BOOT && SPL_MMC @@ -970,6 +1065,20 @@ config SYS_MMCSD_RAW_MODE_KERNEL_SECTOR Note that the Falcon mode image can also be a FIT, if FIT support is enabled. +config SYS_MMCSD_RAW_MODE_ARGS_SECTOR + hex "Falcon mode: Sector to load 'args' from MMC" + depends on SPL_FALCON_BOOT_MMCSD + help + When Falcon mode is used with an MMC or SD media, SPL needs to know + where to look for the OS 'args', typically a device tree. The + contents are expected to begin at the raw MMC specified in this config. + Note that if using a FIT image, this and the next option can be set to + 0x0. + +config SYS_MMCSD_RAW_MODE_ARGS_SECTORS + hex "Falcon mode: Number of sectors to load for 'args' from MMC" + depends on SPL_FALCON_BOOT_MMCSD && SYS_MMCSD_RAW_MODE_ARGS_SECTOR != 0x0 + config SPL_PAYLOAD string "SPL payload" default "tpl/u-boot-with-tpl.bin" if TPL @@ -1007,7 +1116,7 @@ config SPL_POST_MEM_SUPPORT config SPL_DM_RESET bool "Support reset drivers" - depends on SPL + depends on SPL_DM help Enable support for reset control in SPL. That can be useful in SPL to handle IP reset in driver, as in U-Boot, @@ -1310,6 +1419,7 @@ config SPL_ATF_NO_PLATFORM_PARAM config SPL_AM33XX_ENABLE_RTC32K_OSC bool "Enable the RTC32K OSC on AM33xx based platforms" + depends on AM33XX default y if AM33XX help Enable access to the AM33xx RTC and select the external 32kHz clock @@ -1339,519 +1449,15 @@ config SPL_OPENSBI_LOAD_ADDR help Load address of the OpenSBI binary. -config TPL - bool - depends on SUPPORT_TPL - prompt "Enable TPL" - help - If you want to build TPL as well as the normal image and SPL, say Y. - -if TPL - -config TPL_SIZE_LIMIT - hex "Maximum size of TPL image" - depends on TPL - default 0x0 - help - Specifies the maximum length of the U-Boot TPL image. - If this value is zero, it is ignored. - -config TPL_BINMAN_SYMBOLS - bool "Declare binman symbols in TPL" - depends on SPL_FRAMEWORK && BINMAN - default y - help - This enables use of symbols in TPL which refer to U-Boot, enabling TPL - to obtain the location of U-Boot simply by calling spl_get_image_pos() - and spl_get_image_size(). - - For this to work, you must have a U-Boot image in the binman image, so - binman can update TPL with the location of it. - -config TPL_FRAMEWORK - bool "Support TPL based upon the common SPL framework" - default y if SPL_FRAMEWORK - help - Enable the SPL framework under common/spl/ for TPL builds. - This framework supports MMC, NAND and YMODEM and other methods - loading of U-Boot's SPL stage. If unsure, say Y. - -config TPL_HANDOFF - bool "Pass hand-off information from TPL to SPL and U-Boot proper" - depends on HANDOFF && TPL_BLOBLIST - default y - help - This option enables TPL to write handoff information. This can be - used to pass information like the size of SDRAM from TPL to U-Boot - proper. The information is also available to SPL if it is useful - there. - -config TPL_BOARD_INIT - bool "Call board-specific initialization in TPL" - help - If this option is enabled, U-Boot will call the function - spl_board_init() from board_init_r(). This function should be - provided by the board. - -config TPL_BOOTCOUNT_LIMIT - bool "Support bootcount in TPL" - depends on TPL_ENV_SUPPORT - help - If this option is enabled, the TPL will support bootcount. - For example, it may be useful to choose the device to boot. - -config TPL_LDSCRIPT - string "Linker script for the TPL stage" - depends on TPL - default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 - default "arch/\$(ARCH)/cpu/u-boot-spl.lds" - help - The TPL stage will usually require a different linker-script - (as it runs from a different memory region) than the regular - U-Boot stage. Set this to the path of the linker-script to - be used for TPL. - - May be left empty to trigger the Makefile infrastructure to - fall back to the linker-script used for the SPL stage. - -config TPL_NEEDS_SEPARATE_STACK - bool "TPL needs a separate initial stack-pointer" - depends on TPL - help - Enable, if the TPL stage should not inherit its initial - stack-pointer from the settings for the SPL stage. - -config TPL_POWER - bool "Support power drivers" - help - Enable support for power control in TPL. This includes support - for PMICs (Power-management Integrated Circuits) and some of the - features provided by PMICs. In particular, voltage regulators can - be used to enable/disable power and vary its voltage. That can be - useful in TPL to turn on boot peripherals and adjust CPU voltage - so that the clock speed can be increased. This enables the drivers - in drivers/power, drivers/power/pmic and drivers/power/regulator - as part of an TPL build. - -config TPL_TEXT_BASE - hex "Base address for the .text section of the TPL stage" - default 0 - help - The base address for the .text section of the TPL stage. - -config TPL_MAX_SIZE - int "Maximum size (in bytes) for the TPL stage" - default 0 - depends on TPL - help - The maximum size (in bytes) of the TPL stage. - -config TPL_STACK - hex "Address of the initial stack-pointer for the TPL stage" - depends on TPL_NEEDS_SEPARATE_STACK - help - The address of the initial stack-pointer for the TPL stage. - Usually this will be the (aligned) top-of-stack. - -config TPL_READ_ONLY - bool - depends on TPL_OF_PLATDATA - select TPL_OF_PLATDATA_NO_BIND - select TPL_OF_PLATDATA_RT - help - Some platforms (e.g. x86 Apollo Lake) load SPL into a read-only - section of memory. This means that of-platdata must make a copy (in - writeable memory) of anything it wants to modify, such as - device-private data. - -config TPL_BOOTROM_SUPPORT - bool "Support returning to the BOOTROM (from TPL)" - help - Some platforms (e.g. the Rockchip RK3368) provide support in their - ROM for loading the next boot-stage after performing basic setup - from the TPL stage. - - Enable this option, to return to the BOOTROM through the - BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the - boot device list, if not implemented for a given board) - -config TPL_CRC32 - bool "Support CRC32 in TPL" - default y if TPL_ENV_SUPPORT || TPL_BLOBLIST - help - Enable this to support CRC32 in uImages or FIT images within SPL. - This is a 32-bit checksum value that can be used to verify images. - For FIT images, this is the least secure type of checksum, suitable - for detected accidental image corruption. For secure applications you - should consider SHA1 or SHA256. - -config TPL_DRIVERS_MISC - bool "Support misc drivers in TPL" - help - Enable miscellaneous drivers in TPL. These drivers perform various - tasks that don't fall nicely into other categories, Enable this - option to build the drivers in drivers/misc as part of an TPL - build, for those that support building in TPL (not all drivers do). - -config TPL_ENV_SUPPORT - bool "Support an environment" - help - Enable environment support in TPL. See SPL_ENV_SUPPORT for details. - -config TPL_GPIO - bool "Support GPIO in TPL" - help - Enable support for GPIOs (General-purpose Input/Output) in TPL. - GPIOs allow U-Boot to read the state of an input line (high or - low) and set the state of an output line. This can be used to - drive LEDs, control power to various system parts and read user - input. GPIOs can be useful in TPL to enable a 'sign-of-life' LED, - for example. Enable this option to build the drivers in - drivers/gpio as part of an TPL build. - -config TPL_I2C - bool "Support I2C" - help - Enable support for the I2C bus in TPL. See SPL_I2C for - details. - -config TPL_LIBCOMMON_SUPPORT - bool "Support common libraries" +config SPL_TARGET + string "Addtional build targets for 'make'" + default "spl/u-boot-spl.srec" if RCAR_GEN2 + default "spl/u-boot-spl.scif" if RCAR_GEN3 + default "" help - Enable support for common U-Boot libraries within TPL. See - SPL_LIBCOMMON_SUPPORT for details. + On some platforms we need to have 'make' run additional build target + rules. If required on your platform, enter it here, otherwise leave blank. -config TPL_LIBGENERIC_SUPPORT - bool "Support generic libraries" - help - Enable support for generic U-Boot libraries within TPL. See - SPL_LIBGENERIC_SUPPORT for details. - -config TPL_MPC8XXX_INIT_DDR - bool "Support MPC8XXX DDR init" - help - Enable support for DDR-SDRAM on the MPC8XXX family within TPL. See - SPL_MPC8XXX_INIT_DDR for details. - -config TPL_MMC - bool "Support MMC" - depends on MMC - help - Enable support for MMC within TPL. See SPL_MMC for details. - -config TPL_NAND_SUPPORT - bool "Support NAND flash" - help - Enable support for NAND in TPL. See SPL_NAND_SUPPORT for details. - -config TPL_PCI - bool "Support PCI drivers" - help - Enable support for PCI in TPL. For platforms that need PCI to boot, - or must perform some init using PCI in SPL, this provides the - necessary driver support. This enables the drivers in drivers/pci - as part of a TPL build. - -config TPL_PCH - bool "Support PCH drivers" - help - Enable support for PCH (Platform Controller Hub) devices in TPL. - These are used to set up GPIOs and the SPI peripheral early in - boot. This enables the drivers in drivers/pch as part of a TPL - build. - -config TPL_RAM_SUPPORT - bool "Support booting from RAM" - help - Enable booting of an image in RAM. The image can be preloaded or - it can be loaded by TPL directly into RAM (e.g. using USB). - -config TPL_RAM_DEVICE - bool "Support booting from preloaded image in RAM" - depends on TPL_RAM_SUPPORT - help - Enable booting of an image already loaded in RAM. The image has to - be already in memory when TPL takes over, e.g. loaded by the boot - ROM. - -config TPL_RTC - bool "Support RTC drivers" - help - Enable RTC (Real-time Clock) support in TPL. This includes support - for reading and setting the time. Some RTC devices also have some - non-volatile (battery-backed) memory which is accessible if - needed. This enables the drivers in drivers/rtc as part of an TPL - build. - -config TPL_SERIAL - bool "Support serial" - select TPL_PRINTF - select TPL_STRTO - help - Enable support for serial in TPL. See SPL_SERIAL for - details. - -config TPL_SPI_FLASH_SUPPORT - bool "Support SPI flash drivers" - help - Enable support for using SPI flash in TPL. See SPL_SPI_FLASH_SUPPORT - for details. - -config TPL_SPI_FLASH_TINY - bool "Enable low footprint TPL SPI Flash support" - depends on TPL_SPI_FLASH_SUPPORT && !SPI_FLASH_BAR - default y if SPI_FLASH - help - Enable lightweight TPL SPI Flash support that supports just reading - data/images from flash. No support to write/erase flash. Enable - this if you have TPL size limitations and don't need full-fledged - SPI flash support. - -config TPL_SPI_LOAD - bool "Support loading from SPI flash" - depends on TPL_SPI_FLASH_SUPPORT - help - Enable support for loading next stage, U-Boot or otherwise, from - SPI NOR in U-Boot TPL. - -config TPL_SPI - bool "Support SPI drivers" - help - Enable support for using SPI in TPL. See SPL_SPI for - details. - -config TPL_DM_SPI - bool "Support SPI DM drivers in TPL" - help - Enable support for SPI DM drivers in TPL. - -config TPL_DM_SPI_FLASH - bool "Support SPI DM FLASH drivers in TPL" - help - Enable support for SPI DM flash drivers in TPL. - -config TPL_YMODEM_SUPPORT - bool "Support loading using Ymodem" - depends on TPL_SERIAL - help - While loading from serial is slow it can be a useful backup when - there is no other option. The Ymodem protocol provides a reliable - means of transmitting U-Boot over a serial line for using in TPL, - with a checksum to ensure correctness. - -endif # TPL - -config VPL - bool - depends on SUPPORT_SPL - prompt "Enable VPL" - help - If you want to build VPL as well as the normal image, TPL and SPL, - say Y. - -if VPL - -config VPL_BANNER_PRINT - bool "Enable output of the VPL banner 'U-Boot VPL ...'" - depends on VPL - default y - help - If this option is enabled, VPL will print the banner with version - info. Disabling this option could be useful to reduce VPL boot time - (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). - -config VPL_BOARD_INIT - bool "Call board-specific initialization in VPL" - help - If this option is enabled, U-Boot will call the function - spl_board_init() from board_init_r(). This function should be - provided by the board. - -config VPL_CACHE - depends on CACHE - bool "Support cache drivers in VPL" - help - Enable support for cache drivers in VPL. - -config VPL_CRC32 - bool "Support CRC32 in VPL" - default y if VPL_ENV_SUPPORT || VPL_BLOBLIST - help - Enable this to support CRC32 in uImages or FIT images within VPL. - This is a 32-bit checksum value that can be used to verify images. - For FIT images, this is the least secure type of checksum, suitable - for detected accidental image corruption. For secure applications you - should consider SHA1 or SHA256. - -config VPL_DM_SPI - bool "Support SPI DM drivers in VPL" - help - Enable support for SPI DM drivers in VPL. - -config VPL_DM_SPI_FLASH - bool "Support SPI DM FLASH drivers in VPL" - help - Enable support for SPI DM flash drivers in VPL. - -config VPL_FRAMEWORK - bool "Support VPL based upon the common SPL framework" - default y - help - Enable the SPL framework under common/spl/ for VPL builds. - This framework supports MMC, NAND and YMODEM and other methods - loading of U-Boot's next stage. If unsure, say Y. - -config VPL_HANDOFF - bool "Pass hand-off information from VPL to SPL" - depends on HANDOFF && VPL_BLOBLIST - default y - help - This option enables VPL to write handoff information. This can be - used to pass information like the size of SDRAM from VPL to SPL. Also - VPL can receive information from TPL in the same place if that is - enabled. - -config VPL_LIBCOMMON_SUPPORT - bool "Support common libraries" - default y if SPL_LIBCOMMON_SUPPORT - help - Enable support for common U-Boot libraries within VPL. See - SPL_LIBCOMMON_SUPPORT for details. - -config VPL_LIBGENERIC_SUPPORT - bool "Support generic libraries" - default y if SPL_LIBGENERIC_SUPPORT - help - Enable support for generic U-Boot libraries within VPL. These - libraries include generic code to deal with device tree, hashing, - printf(), compression and the like. This option is enabled on many - boards. Enable this option to build the code in lib/ as part of a - VPL build. - -config VPL_DRIVERS_MISC - bool "Support misc drivers" - default y if TPL_DRIVERS_MISC - help - Enable miscellaneous drivers in VPL. These drivers perform various - tasks that don't fall nicely into other categories, Enable this - option to build the drivers in drivers/misc as part of a VPL - build, for those that support building in VPL (not all drivers do). - -config VPL_ENV_SUPPORT - bool "Support an environment" - help - Enable environment support in VPL. The U-Boot environment provides - a number of settings (essentially name/value pairs) which can - control many aspects of U-Boot's operation. Enabling this option will - make env_get() and env_set() available in VSPL. - -config VPL_GPIO - bool "Support GPIO in VPL" - default y if SPL_GPIO - help - Enable support for GPIOs (General-purpose Input/Output) in VPL. - GPIOs allow U-Boot to read the state of an input line (high or - low) and set the state of an output line. This can be used to - drive LEDs, control power to various system parts and read user - input. GPIOs can be useful in VPL to enable a 'sign-of-life' LED, - for example. Enable this option to build the drivers in - drivers/gpio as part of a VPL build. - -config VPL_HANDOFF - bool "Pass hand-off information from VPL to SPL and U-Boot proper" - depends on HANDOFF && VPL_BLOBLIST - default y - help - This option enables VPL to write handoff information. This can be - used to pass information like the size of SDRAM from VPL to U-Boot - proper. The information is also available to VPL if it is useful - there. - -config VPL_HASH - bool "Support hashing drivers in VPL" - depends on VPL - select SHA1 - select SHA256 - help - Enable hashing drivers in VPL. These drivers can be used to - accelerate secure boot processing in secure applications. Enable - this option to build system-specific drivers for hash acceleration - as part of a VPL build. - -config VPL_I2C_SUPPORT - bool "Support I2C in VPL" - default y if SPL_I2C_SUPPORT - help - Enable support for the I2C bus in VPL. Vee SPL_I2C_SUPPORT for - details. - -config VPL_PCH_SUPPORT - bool "Support PCH drivers" - default y if TPL_PCH_SUPPORT - help - Enable support for PCH (Platform Controller Hub) devices in VPL. - These are used to set up GPIOs and the SPI peripheral early in - boot. This enables the drivers in drivers/pch as part of a VPL - build. - -config VPL_PCI - bool "Support PCI drivers" - default y if SPL_PCI - help - Enable support for PCI in VPL. For platforms that need PCI to boot, - or must perform some init using PCI in VPL, this provides the - necessary driver support. This enables the drivers in drivers/pci - as part of a VPL build. - -config VPL_RTC - bool "Support RTC drivers" - help - Enable RTC (Real-time Clock) support in VPL. This includes support - for reading and setting the time. Some RTC devices also have some - non-volatile (battery-backed) memory which is accessible if - needed. This enables the drivers in drivers/rtc as part of a VPL - build. - -config VPL_SERIAL - bool "Support serial" - default y if TPL_SERIAL - select VPL_PRINTF - select VPL_STRTO - help - Enable support for serial in VPL. See SPL_SERIAL_SUPPORT for - details. - -config VPL_SIZE_LIMIT - hex "Maximum size of VPL image" - depends on VPL - default 0x0 - help - Specifies the maximum length of the U-Boot VPL image. - If this value is zero, it is ignored. - -config VPL_SPI - bool "Support SPI drivers" - help - Enable support for using SPI in VPL. See SPL_SPI_SUPPORT for - details. - -config VPL_SPI_FLASH_SUPPORT - bool "Support SPI flash drivers" - help - Enable support for using SPI flash in VPL, and loading U-Boot from - SPI flash. SPI flash (Serial Peripheral Bus flash) is named after - the SPI bus that is used to connect it to a system. It is a simple - but fast bidirectional 4-wire bus (clock, chip select and two data - lines). This enables the drivers in drivers/mtd/spi as part of a - VPL build. This normally requires VPL_SPI_SUPPORT. - -config VPL_TEXT_BASE - hex "VPL Text Base" - default 0x0 - help - The address in memory that VPL will be running from. - -endif # VPL config SPL_AT91_MCK_BYPASS bool "Use external clock signal as a source of main clock for AT91 platforms" @@ -1863,6 +1469,21 @@ config SPL_AT91_MCK_BYPASS The external source has to provide a stable clock on the XIN pin. If this option is disabled, the SoC expects a crystal oscillator that needs driving on both XIN and XOUT lines. - -endif # SPL endmenu + +config TPL + depends on SUPPORT_TPL + bool "Enable TPL" + help + If you want to build TPL as well as the normal image and SPL, say Y. + +source "common/spl/Kconfig.tpl" + +config VPL + depends on SUPPORT_SPL + bool "Enable VPL" + help + If you want to build VPL as well as the normal image, TPL and SPL, + say Y. + +source "common/spl/Kconfig.vpl" diff --git a/common/spl/Kconfig.nxp b/common/spl/Kconfig.nxp new file mode 100644 index 00000000000..8da85539afd --- /dev/null +++ b/common/spl/Kconfig.nxp @@ -0,0 +1,124 @@ +menu "PowerPC and LayerScape SPL Boot options" + depends on (PPC && SUPPORT_SPL && !SPL_FRAMEWORK) || \ + ((ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) && SUPPORT_SPL) + +config SPL_NAND_BOOT + bool "Load SPL from NAND flash" + depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK) + +config SPL_MMC_BOOT + bool "Load SPL from SD Card / eMMC" + depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK) + +config SPL_SPI_BOOT + bool "Load SPL from SPI flash" + depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK) + +config SPL_FSL_PBL + bool "Create SPL in Freescale PBI format" + depends on (PPC || ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) && \ + SUPPORT_SPL + help + Create boot binary having SPL binary in PBI format concatenated with + u-boot binary. + +config SPL_SYS_CCSR_DO_NOT_RELOCATE + bool "Ensures that CCSR is not relocated" + depends on PPC + help + If this is defined, then CONFIG_SYS_CCSRBAR_PHYS will be forced to a + value that ensures that CCSR is not relocated. + +config TPL_SYS_CCSR_DO_NOT_RELOCATE + def_bool y + depends on SPL_SYS_CCSR_DO_NOT_RELOCATE + +menu "PowerPC SPL / TPL specific options" + depends on PPC && (SPL && !SPL_FRAMEWORK) + +config SPL_INIT_MINIMAL + bool "Arch init code will be built for a very small image" + +config SPL_FLUSH_IMAGE + bool "Clean dcache and invalidate icache after loading the image" + +config SPL_SKIP_RELOCATE + bool "Skip relocating SPL" + +config SPL_GD_ADDR + hex "Address to use for global data (gd) in SPL" + depends on !SPL_INIT_MINIMAL + +config SPL_RELOC_TEXT_BASE + hex "Address to relocate SPL to" + default SPL_TEXT_BASE + help + If unspecified, this is equal to CONFIG_SPL_TEXT_BASE (i.e. no + relocation is done). + +config SPL_RELOC_STACK + hex "Address of the start of the stack SPL will use after relocation." + help + If unspecified, this is equal to CONFIG_SYS_SPL_MALLOC_START. Starting + address of the malloc pool used in SPL. When this option is set the full + malloc is used in SPL and it is set up by spl_init() and before that, the + simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined. + +config SPL_RELOC_MALLOC + bool "SPL has malloc pool after relocation" + +config SPL_RELOC_MALLOC_ADDR + hex "Address of malloc pool in SPL" + depends on SPL_RELOC_MALLOC + +config SPL_RELOC_MALLOC_SIZE + hex "Size of malloc pool in SPL" + depends on SPL_RELOC_MALLOC + +config TPL_GD_ADDR + hex "Address to use for global data (gd) in TPL" + depends on TPL + +config TPL_RELOC_TEXT_BASE + hex "Address to relocate TPL to" + depends on TPL + default TPL_TEXT_BASE + help + If unspecified, this is equal to CONFIG_TPL_TEXT_BASE (i.e. no + relocation is done). + +config TPL_RELOC_STACK + hex "Address of the start of the stack TPL will use after relocation." + depends on TPL + help + If unspecified, this is equal to CONFIG_SYS_TPL_MALLOC_START. Starting + address of the malloc pool used in TPL. When this option is set the full + malloc is used in TPL and it is set up by spl_init() and before that, the + simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined. + +config TPL_RELOC_MALLOC + bool "TPL has malloc pool after relocation" + depends on TPL + +config TPL_RELOC_MALLOC_ADDR + hex "Address of malloc pool in TPL" + depends on TPL_RELOC_MALLOC + +config TPL_RELOC_MALLOC_SIZE + hex "Size of malloc pool in TPL" + depends on TPL_RELOC_MALLOC + +config TPL_PAD_TO + hex "Offset to which the TPL should be padded before appending the TPL payload" + depends on TPL && !TPL_FRAMEWORK + default TPL_MAX_SIZE + help + Image offset to which the TPL should be padded before appending the + TPL payload. By default, this is defined as CONFIG_TPL_MAX_SIZE, or 0 if + CONFIG_TPL_MAX_SIZE is undefined. CONFIG_TPL_PAD_TO must be either + 0, meaning to append the TPL payload without any padding, or >= + CONFIG_TPL_MAX_SIZE. +endmenu + +endmenu + diff --git a/common/spl/Kconfig.tpl b/common/spl/Kconfig.tpl new file mode 100644 index 00000000000..9a0e719cf94 --- /dev/null +++ b/common/spl/Kconfig.tpl @@ -0,0 +1,322 @@ +menu "TPL configuration options" + depends on TPL + +config TPL_SIZE_LIMIT + hex "Maximum size of TPL image" + default 0x0 + help + Specifies the maximum length of the U-Boot TPL image. + If this value is zero, it is ignored. + +config TPL_BINMAN_SYMBOLS + bool "Declare binman symbols in TPL" + depends on SPL_FRAMEWORK && BINMAN + default y + help + This enables use of symbols in TPL which refer to U-Boot, enabling TPL + to obtain the location of U-Boot simply by calling spl_get_image_pos() + and spl_get_image_size(). + + For this to work, you must have a U-Boot image in the binman image, so + binman can update TPL with the location of it. + +config TPL_FRAMEWORK + bool "Support TPL based upon the common SPL framework" + default y if SPL_FRAMEWORK + help + Enable the SPL framework under common/spl/ for TPL builds. + This framework supports MMC, NAND and YMODEM and other methods + loading of U-Boot's SPL stage. If unsure, say Y. + +config TPL_BANNER_PRINT + bool "Enable output of the TPL banner 'U-Boot TPL ...'" + default y + help + If this option is enabled, TPL will print the banner with version + info. Disabling this option could be useful to reduce TPL boot time + (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). + +config TPL_HANDOFF + bool "Pass hand-off information from TPL to SPL and U-Boot proper" + depends on HANDOFF && TPL_BLOBLIST + default y + help + This option enables TPL to write handoff information. This can be + used to pass information like the size of SDRAM from TPL to U-Boot + proper. The information is also available to SPL if it is useful + there. + +config TPL_BOARD_INIT + bool "Call board-specific initialization in TPL" + help + If this option is enabled, U-Boot will call the function + spl_board_init() from board_init_r(). This function should be + provided by the board. + +config TPL_BOOTCOUNT_LIMIT + bool "Support bootcount in TPL" + depends on TPL_ENV_SUPPORT + help + If this option is enabled, the TPL will support bootcount. + For example, it may be useful to choose the device to boot. + +config TPL_SYS_MALLOC_SIMPLE + bool + prompt "Only use malloc_simple functions in the TPL" + help + Say Y here to only use the *_simple malloc functions from + malloc_simple.c, rather then using the versions from dlmalloc.c; + this will make the TPL binary smaller at the cost of more heap + usage as the *_simple malloc functions do not re-use free-ed mem. + +config TPL_SEPARATE_BSS + bool "BSS section is in a different memory region from text" + default y if SPL_SEPARATE_BSS + help + Some platforms need a large BSS region in TPL and can provide this + because RAM is already set up. In this case BSS can be moved to RAM. + This option should then be enabled so that the correct device tree + location is used. Normally we put the device tree at the end of BSS + but with this option enabled, it goes at _image_binary_end. + +config TPL_LDSCRIPT + string "Linker script for the TPL stage" + default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 + default "arch/\$(ARCH)/cpu/u-boot-spl.lds" + help + The TPL stage will usually require a different linker-script + (as it runs from a different memory region) than the regular + U-Boot stage. Set this to the path of the linker-script to + be used for TPL. + + May be left empty to trigger the Makefile infrastructure to + fall back to the linker-script used for the SPL stage. + +config TPL_NEEDS_SEPARATE_STACK + bool "TPL needs a separate initial stack-pointer" + help + Enable, if the TPL stage should not inherit its initial + stack-pointer from the settings for the SPL stage. + +config TPL_POWER + bool "Support power drivers" + help + Enable support for power control in TPL. This includes support + for PMICs (Power-management Integrated Circuits) and some of the + features provided by PMICs. In particular, voltage regulators can + be used to enable/disable power and vary its voltage. That can be + useful in TPL to turn on boot peripherals and adjust CPU voltage + so that the clock speed can be increased. This enables the drivers + in drivers/power, drivers/power/pmic and drivers/power/regulator + as part of an TPL build. + +config TPL_TEXT_BASE + hex "Base address for the .text section of the TPL stage" + default 0 + help + The base address for the .text section of the TPL stage. + +config TPL_MAX_SIZE + hex "Maximum size (in bytes) for the TPL stage" + default 0x2e000 if ROCKCHIP_RK3399 + default 0x8000 if ROCKCHIP_RK3288 + default 0x7000 if ROCKCHIP_RK322X || ROCKCHIP_RK3328 || ROCKCHIP_RK3368 + default 0x2800 if ROCKCHIP_PX30 + default 0x0 + help + The maximum size (in bytes) of the TPL stage. + +config TPL_STACK + hex "Address of the initial stack-pointer for the TPL stage" + depends on TPL_NEEDS_SEPARATE_STACK + help + The address of the initial stack-pointer for the TPL stage. + Usually this will be the (aligned) top-of-stack. + +config TPL_READ_ONLY + bool + depends on TPL_OF_PLATDATA + select TPL_OF_PLATDATA_NO_BIND + select TPL_OF_PLATDATA_RT + help + Some platforms (e.g. x86 Apollo Lake) load SPL into a read-only + section of memory. This means that of-platdata must make a copy (in + writeable memory) of anything it wants to modify, such as + device-private data. + +config TPL_BOOTROM_SUPPORT + bool "Support returning to the BOOTROM (from TPL)" + help + Some platforms (e.g. the Rockchip RK3368) provide support in their + ROM for loading the next boot-stage after performing basic setup + from the TPL stage. + + Enable this option, to return to the BOOTROM through the + BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the + boot device list, if not implemented for a given board) + +config TPL_CRC32 + bool "Support CRC32 in TPL" + default y if TPL_ENV_SUPPORT || TPL_BLOBLIST + help + Enable this to support CRC32 in uImages or FIT images within SPL. + This is a 32-bit checksum value that can be used to verify images. + For FIT images, this is the least secure type of checksum, suitable + for detected accidental image corruption. For secure applications you + should consider SHA1 or SHA256. + +config TPL_DRIVERS_MISC + bool "Support misc drivers in TPL" + help + Enable miscellaneous drivers in TPL. These drivers perform various + tasks that don't fall nicely into other categories, Enable this + option to build the drivers in drivers/misc as part of an TPL + build, for those that support building in TPL (not all drivers do). + +config TPL_ENV_SUPPORT + bool "Support an environment" + help + Enable environment support in TPL. See SPL_ENV_SUPPORT for details. + +config TPL_GPIO + bool "Support GPIO in TPL" + help + Enable support for GPIOs (General-purpose Input/Output) in TPL. + GPIOs allow U-Boot to read the state of an input line (high or + low) and set the state of an output line. This can be used to + drive LEDs, control power to various system parts and read user + input. GPIOs can be useful in TPL to enable a 'sign-of-life' LED, + for example. Enable this option to build the drivers in + drivers/gpio as part of an TPL build. + +config TPL_I2C + bool "Support I2C" + help + Enable support for the I2C bus in TPL. See SPL_I2C for + details. + +config TPL_LIBCOMMON_SUPPORT + bool "Support common libraries" + help + Enable support for common U-Boot libraries within TPL. See + SPL_LIBCOMMON_SUPPORT for details. + +config TPL_LIBGENERIC_SUPPORT + bool "Support generic libraries" + help + Enable support for generic U-Boot libraries within TPL. See + SPL_LIBGENERIC_SUPPORT for details. + +config TPL_MPC8XXX_INIT_DDR + bool "Support MPC8XXX DDR init" + help + Enable support for DDR-SDRAM on the MPC8XXX family within TPL. See + SPL_MPC8XXX_INIT_DDR for details. + +config TPL_MMC + bool "Support MMC" + depends on MMC + help + Enable support for MMC within TPL. See SPL_MMC for details. + +config TPL_NAND_SUPPORT + bool "Support NAND flash" + help + Enable support for NAND in TPL. See SPL_NAND_SUPPORT for details. + +config TPL_PCI + bool "Support PCI drivers" + help + Enable support for PCI in TPL. For platforms that need PCI to boot, + or must perform some init using PCI in SPL, this provides the + necessary driver support. This enables the drivers in drivers/pci + as part of a TPL build. + +config TPL_PCH + bool "Support PCH drivers" + help + Enable support for PCH (Platform Controller Hub) devices in TPL. + These are used to set up GPIOs and the SPI peripheral early in + boot. This enables the drivers in drivers/pch as part of a TPL + build. + +config TPL_RAM_SUPPORT + bool "Support booting from RAM" + help + Enable booting of an image in RAM. The image can be preloaded or + it can be loaded by TPL directly into RAM (e.g. using USB). + +config TPL_RAM_DEVICE + bool "Support booting from preloaded image in RAM" + depends on TPL_RAM_SUPPORT + help + Enable booting of an image already loaded in RAM. The image has to + be already in memory when TPL takes over, e.g. loaded by the boot + ROM. + +config TPL_RTC + bool "Support RTC drivers" + help + Enable RTC (Real-time Clock) support in TPL. This includes support + for reading and setting the time. Some RTC devices also have some + non-volatile (battery-backed) memory which is accessible if + needed. This enables the drivers in drivers/rtc as part of an TPL + build. + +config TPL_SERIAL + bool "Support serial" + select TPL_PRINTF + select TPL_STRTO + help + Enable support for serial in TPL. See SPL_SERIAL for + details. + +config TPL_SPI_FLASH_SUPPORT + bool "Support SPI flash drivers" + help + Enable support for using SPI flash in TPL. See SPL_SPI_FLASH_SUPPORT + for details. + +config TPL_SPI_FLASH_TINY + bool "Enable low footprint TPL SPI Flash support" + depends on TPL_SPI_FLASH_SUPPORT && !SPI_FLASH_BAR + default y if SPI_FLASH + help + Enable lightweight TPL SPI Flash support that supports just reading + data/images from flash. No support to write/erase flash. Enable + this if you have TPL size limitations and don't need full-fledged + SPI flash support. + +config TPL_SPI_LOAD + bool "Support loading from SPI flash" + depends on TPL_SPI_FLASH_SUPPORT + help + Enable support for loading next stage, U-Boot or otherwise, from + SPI NOR in U-Boot TPL. + +config TPL_SPI + bool "Support SPI drivers" + help + Enable support for using SPI in TPL. See SPL_SPI for + details. + +config TPL_DM_SPI + bool "Support SPI DM drivers in TPL" + help + Enable support for SPI DM drivers in TPL. + +config TPL_DM_SPI_FLASH + bool "Support SPI DM FLASH drivers in TPL" + help + Enable support for SPI DM flash drivers in TPL. + +config TPL_YMODEM_SUPPORT + bool "Support loading using Ymodem" + depends on TPL_SERIAL + help + While loading from serial is slow it can be a useful backup when + there is no other option. The Ymodem protocol provides a reliable + means of transmitting U-Boot over a serial line for using in TPL, + with a checksum to ensure correctness. + +endmenu diff --git a/common/spl/Kconfig.vpl b/common/spl/Kconfig.vpl new file mode 100644 index 00000000000..ba1ea6075b9 --- /dev/null +++ b/common/spl/Kconfig.vpl @@ -0,0 +1,201 @@ +menu "VPL options" + depends on VPL + +config VPL_BANNER_PRINT + bool "Enable output of the VPL banner 'U-Boot VPL ...'" + default y + help + If this option is enabled, VPL will print the banner with version + info. Disabling this option could be useful to reduce VPL boot time + (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). + +config VPL_BOARD_INIT + bool "Call board-specific initialization in VPL" + help + If this option is enabled, U-Boot will call the function + spl_board_init() from board_init_r(). This function should be + provided by the board. + +config VPL_CACHE + depends on CACHE + bool "Support cache drivers in VPL" + help + Enable support for cache drivers in VPL. + +config VPL_CRC32 + bool "Support CRC32 in VPL" + default y if VPL_ENV_SUPPORT || VPL_BLOBLIST + help + Enable this to support CRC32 in uImages or FIT images within VPL. + This is a 32-bit checksum value that can be used to verify images. + For FIT images, this is the least secure type of checksum, suitable + for detected accidental image corruption. For secure applications you + should consider SHA1 or SHA256. + +config VPL_DM_SPI + bool "Support SPI DM drivers in VPL" + help + Enable support for SPI DM drivers in VPL. + +config VPL_DM_SPI_FLASH + bool "Support SPI DM FLASH drivers in VPL" + help + Enable support for SPI DM flash drivers in VPL. + +config VPL_FRAMEWORK + bool "Support VPL based upon the common SPL framework" + default y + help + Enable the SPL framework under common/spl/ for VPL builds. + This framework supports MMC, NAND and YMODEM and other methods + loading of U-Boot's next stage. If unsure, say Y. + +config VPL_HANDOFF + bool "Pass hand-off information from VPL to SPL" + depends on HANDOFF && VPL_BLOBLIST + default y + help + This option enables VPL to write handoff information. This can be + used to pass information like the size of SDRAM from VPL to SPL. Also + VPL can receive information from TPL in the same place if that is + enabled. + +config VPL_LIBCOMMON_SUPPORT + bool "Support common libraries" + default y if SPL_LIBCOMMON_SUPPORT + help + Enable support for common U-Boot libraries within VPL. See + SPL_LIBCOMMON_SUPPORT for details. + +config VPL_LIBGENERIC_SUPPORT + bool "Support generic libraries" + default y if SPL_LIBGENERIC_SUPPORT + help + Enable support for generic U-Boot libraries within VPL. These + libraries include generic code to deal with device tree, hashing, + printf(), compression and the like. This option is enabled on many + boards. Enable this option to build the code in lib/ as part of a + VPL build. + +config VPL_DRIVERS_MISC + bool "Support misc drivers" + default y if TPL_DRIVERS_MISC + help + Enable miscellaneous drivers in VPL. These drivers perform various + tasks that don't fall nicely into other categories, Enable this + option to build the drivers in drivers/misc as part of a VPL + build, for those that support building in VPL (not all drivers do). + +config VPL_ENV_SUPPORT + bool "Support an environment" + help + Enable environment support in VPL. The U-Boot environment provides + a number of settings (essentially name/value pairs) which can + control many aspects of U-Boot's operation. Enabling this option will + make env_get() and env_set() available in VSPL. + +config VPL_GPIO + bool "Support GPIO in VPL" + default y if SPL_GPIO + help + Enable support for GPIOs (General-purpose Input/Output) in VPL. + GPIOs allow U-Boot to read the state of an input line (high or + low) and set the state of an output line. This can be used to + drive LEDs, control power to various system parts and read user + input. GPIOs can be useful in VPL to enable a 'sign-of-life' LED, + for example. Enable this option to build the drivers in + drivers/gpio as part of a VPL build. + +config VPL_HANDOFF + bool "Pass hand-off information from VPL to SPL and U-Boot proper" + depends on HANDOFF && VPL_BLOBLIST + default y + help + This option enables VPL to write handoff information. This can be + used to pass information like the size of SDRAM from VPL to U-Boot + proper. The information is also available to VPL if it is useful + there. + +config VPL_HASH + bool "Support hashing drivers in VPL" + select SHA1 + select SHA256 + help + Enable hashing drivers in VPL. These drivers can be used to + accelerate secure boot processing in secure applications. Enable + this option to build system-specific drivers for hash acceleration + as part of a VPL build. + +config VPL_I2C_SUPPORT + bool "Support I2C in VPL" + default y if SPL_I2C_SUPPORT + help + Enable support for the I2C bus in VPL. Vee SPL_I2C_SUPPORT for + details. + +config VPL_PCH_SUPPORT + bool "Support PCH drivers" + default y if TPL_PCH_SUPPORT + help + Enable support for PCH (Platform Controller Hub) devices in VPL. + These are used to set up GPIOs and the SPI peripheral early in + boot. This enables the drivers in drivers/pch as part of a VPL + build. + +config VPL_PCI + bool "Support PCI drivers" + default y if SPL_PCI + help + Enable support for PCI in VPL. For platforms that need PCI to boot, + or must perform some init using PCI in VPL, this provides the + necessary driver support. This enables the drivers in drivers/pci + as part of a VPL build. + +config VPL_RTC + bool "Support RTC drivers" + help + Enable RTC (Real-time Clock) support in VPL. This includes support + for reading and setting the time. Some RTC devices also have some + non-volatile (battery-backed) memory which is accessible if + needed. This enables the drivers in drivers/rtc as part of a VPL + build. + +config VPL_SERIAL + bool "Support serial" + default y if TPL_SERIAL + select VPL_PRINTF + select VPL_STRTO + help + Enable support for serial in VPL. See SPL_SERIAL_SUPPORT for + details. + +config VPL_SIZE_LIMIT + hex "Maximum size of VPL image" + default 0x0 + help + Specifies the maximum length of the U-Boot VPL image. + If this value is zero, it is ignored. + +config VPL_SPI + bool "Support SPI drivers" + help + Enable support for using SPI in VPL. See SPL_SPI_SUPPORT for + details. + +config VPL_SPI_FLASH_SUPPORT + bool "Support SPI flash drivers" + help + Enable support for using SPI flash in VPL, and loading U-Boot from + SPI flash. SPI flash (Serial Peripheral Bus flash) is named after + the SPI bus that is used to connect it to a system. It is a simple + but fast bidirectional 4-wire bus (clock, chip select and two data + lines). This enables the drivers in drivers/mtd/spi as part of a + VPL build. This normally requires VPL_SPI_SUPPORT. + +config VPL_TEXT_BASE + hex "VPL Text Base" + default 0x0 + help + The address in memory that VPL will be running from. + +endmenu diff --git a/common/spl/spl.c b/common/spl/spl.c index c8c463f80bd..2a69a7c9324 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -19,6 +19,7 @@ #include <mapmem.h> #include <serial.h> #include <spl.h> +#include <system-constants.h> #include <asm/global_data.h> #include <asm-generic/gpio.h> #include <asm/u-boot.h> @@ -728,9 +729,8 @@ void board_init_r(gd_t *dummy1, ulong dummy2) spl_set_bd(); -#if defined(CONFIG_SYS_SPL_MALLOC_START) - mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, - CONFIG_SYS_SPL_MALLOC_SIZE); +#if defined(CONFIG_SYS_SPL_MALLOC) + mem_malloc_init(SYS_SPL_MALLOC_START, CONFIG_SYS_SPL_MALLOC_SIZE); gd->flags |= GD_FLG_FULL_MALLOC_INIT; #endif if (!(gd->flags & GD_FLG_SPL_INIT)) { diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index 6116a68371a..f66147477e7 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -229,7 +229,7 @@ static int mmc_load_image_raw_os(struct spl_image_info *spl_image, { int ret; -#if defined(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR) +#if CONFIG_VAL(SYS_MMCSD_RAW_MODE_ARGS_SECTOR) unsigned long count; count = blk_dread(mmc_get_blk_desc(mmc), diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c index 067a2d42bbf..7986e930d28 100644 --- a/common/spl/spl_nor.c +++ b/common/spl/spl_nor.c @@ -74,8 +74,8 @@ static int spl_nor_load_image(struct spl_image_info *spl_image, (void *)(CONFIG_SYS_OS_BASE + sizeof(struct image_header)), spl_image->size); -#ifdef CONFIG_SYS_FDT_BASE - spl_image->arg = (void *)CONFIG_SYS_FDT_BASE; +#ifdef CONFIG_SYS_SPL_ARGS_ADDR + spl_image->arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR; #endif return 0; diff --git a/common/spl/spl_sata.c b/common/spl/spl_sata.c index 1f3a144cdfb..1351d78612a 100644 --- a/common/spl/spl_sata.c +++ b/common/spl/spl_sata.c @@ -21,10 +21,6 @@ #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1 #endif -#ifndef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif - #ifndef CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR /* Dummy value to make the compiler happy */ #define CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR 0x100 @@ -73,21 +69,11 @@ static int spl_sata_load_image(struct spl_image_info *spl_image, int err = 0; struct blk_desc *stor_dev; -#if !defined(CONFIG_DM_SCSI) && !defined(CONFIG_AHCI) - err = init_sata(CONFIG_SPL_SATA_BOOT_DEVICE); -#endif - if (err) { -#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - printf("spl: sata init failed: err - %d\n", err); -#endif - return err; - } else { - /* try to recognize storage devices immediately */ - scsi_scan(false); - stor_dev = blk_get_devnum_by_type(IF_TYPE_SCSI, 0); - if (!stor_dev) - return -ENODEV; - } + /* try to recognize storage devices immediately */ + scsi_scan(false); + stor_dev = blk_get_devnum_by_type(IF_TYPE_SCSI, 0); + if (!stor_dev) + return -ENODEV; #if CONFIG_IS_ENABLED(OS_BOOT) if (spl_start_uboot() || diff --git a/common/spl/spl_xip.c b/common/spl/spl_xip.c index 33863fe7d45..e9a40b0ec79 100644 --- a/common/spl/spl_xip.c +++ b/common/spl/spl_xip.c @@ -14,7 +14,7 @@ static int spl_xip(struct spl_image_info *spl_image, { #if CONFIG_IS_ENABLED(OS_BOOT) if (!spl_start_uboot()) { - spl_image->arg = (void *)CONFIG_SYS_FDT_BASE; + spl_image->arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR; spl_image->name = "Linux"; spl_image->os = IH_OS_LINUX; spl_image->load_addr = CONFIG_SYS_LOAD_ADDR; diff --git a/configs/10m50_defconfig b/configs/10m50_defconfig index 72f8ce91019..6c56cdc3286 100644 --- a/configs/10m50_defconfig +++ b/configs/10m50_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_MONITOR_BASE=0xCFF80000 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/3c120_defconfig b/configs/3c120_defconfig index 0a69871ec56..f266c0e5e41 100644 --- a/configs/3c120_defconfig +++ b/configs/3c120_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_MONITOR_BASE=0xD7F80000 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_XIMG is not set @@ -37,6 +39,7 @@ CONFIG_ALTERA_SYSID=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_CFI_FLASH=y +CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 90f12308bab..026668b0bd0 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -11,7 +11,9 @@ CONFIG_I2C1_ENABLE=y CONFIG_SATAPWR="PC3" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index 99f57857517..7e9b92ee5ee 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -9,7 +9,9 @@ CONFIG_MMC1_CD_PIN="PG13" CONFIG_MMC_SUNXI_SLOT_EXTRA=1 CONFIG_USB1_VBUS_PIN="PB10" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index f9d17b19500..625a331e445 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -13,6 +13,8 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y CONFIG_VIDEO_LCD_POWER="PB10" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 8c9043559bd..5e0396c150f 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -15,7 +15,9 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_DFU_RAM=y diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig index 918fc64e0e0..e0db1e67388 100644 --- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig @@ -13,7 +13,9 @@ CONFIG_SATAPWR="PC3" CONFIG_SPL_SPI_SUNXI=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_SCSI_AHCI=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 903e3fdbcc8..a78cbfb1391 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -11,7 +11,9 @@ CONFIG_I2C1_ENABLE=y CONFIG_SATAPWR="PC3" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_SCSI_AHCI=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index c06050610de..da3532ccc46 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -9,7 +9,9 @@ CONFIG_I2C1_ENABLE=y CONFIG_SATAPWR="PC3" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/A20-OLinuXino_MICRO-eMMC_defconfig b/configs/A20-OLinuXino_MICRO-eMMC_defconfig index cf3fc682e44..0563a5188e6 100644 --- a/configs/A20-OLinuXino_MICRO-eMMC_defconfig +++ b/configs/A20-OLinuXino_MICRO-eMMC_defconfig @@ -11,7 +11,9 @@ CONFIG_VIDEO_VGA=y CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 81c27432cdc..4993cf7d2d7 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -12,7 +12,9 @@ CONFIG_VIDEO_VGA=y CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig index 075d999e1c9..0db97ae8415 100644 --- a/configs/A20-Olimex-SOM-EVB_defconfig +++ b/configs/A20-Olimex-SOM-EVB_defconfig @@ -12,7 +12,9 @@ CONFIG_USB0_VBUS_DET="PH5" CONFIG_SATAPWR="PC3" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig index 829e7bbcd33..91d29e44469 100644 --- a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig +++ b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig @@ -13,7 +13,9 @@ CONFIG_SATAPWR="PC3" CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/A20-Olimex-SOM204-EVB_defconfig b/configs/A20-Olimex-SOM204-EVB_defconfig index 5b96ddc68ba..893f2e627d5 100644 --- a/configs/A20-Olimex-SOM204-EVB_defconfig +++ b/configs/A20-Olimex-SOM204-EVB_defconfig @@ -12,7 +12,9 @@ CONFIG_SATAPWR="PC3" CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/A33-OLinuXino_defconfig b/configs/A33-OLinuXino_defconfig index 351a454339b..c9eec1f8879 100644 --- a/configs/A33-OLinuXino_defconfig +++ b/configs/A33-OLinuXino_defconfig @@ -16,5 +16,7 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_BL_EN="PB2" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig index 9a18af8c6e1..8cd38f7905b 100644 --- a/configs/Ainol_AW1_defconfig +++ b/configs/Ainol_AW1_defconfig @@ -14,7 +14,9 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig index 7bf3dfcd8a5..68707ed3e95 100644 --- a/configs/Ampe_A76_defconfig +++ b/configs/Ampe_A76_defconfig @@ -15,7 +15,9 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig index 7d81f12f766..703df186b27 100644 --- a/configs/Auxtek-T003_defconfig +++ b/configs/Auxtek-T003_defconfig @@ -8,7 +8,9 @@ CONFIG_DRAM_EMR1=0 CONFIG_USB1_VBUS_PIN="PB10" CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig index 4c7154b04c4..a8d236eaf9d 100644 --- a/configs/Auxtek-T004_defconfig +++ b/configs/Auxtek-T004_defconfig @@ -6,7 +6,9 @@ CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 CONFIG_USB1_VBUS_PIN="PG13" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig index a66aef0755a..7d9c688171d 100644 --- a/configs/Bananapi_M2_Ultra_defconfig +++ b/configs/Bananapi_M2_Ultra_defconfig @@ -12,7 +12,9 @@ CONFIG_USB2_VBUS_PIN="PH23" # CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index 7f59fc9b3d3..6cc2d5b6472 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -9,7 +9,9 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_NETCONSOLE=y CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/Bananapi_m2m_defconfig b/configs/Bananapi_m2m_defconfig index bad38a66568..6a07f26c02c 100644 --- a/configs/Bananapi_m2m_defconfig +++ b/configs/Bananapi_m2m_defconfig @@ -10,6 +10,8 @@ CONFIG_MMC0_CD_PIN="PB4" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB0_ID_DET="PH8" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index e075635aadd..19b644613a6 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -11,7 +11,9 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_NETCONSOLE=y CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig index cd9bdbfd36f..40d2c5b668a 100644 --- a/configs/CHIP_defconfig +++ b/configs/CHIP_defconfig @@ -7,7 +7,9 @@ CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y CONFIG_USB0_VBUS_PIN="PB10" CONFIG_VIDEO_COMPOSITE=y CONFIG_CHIP_DIP_SCAN=y +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_DFU=y CONFIG_DFU_RAM=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig index 29179601907..90168010bb8 100644 --- a/configs/CHIP_pro_defconfig +++ b/configs/CHIP_pro_defconfig @@ -5,7 +5,9 @@ CONFIG_SPL=y CONFIG_MACH_SUN5I=y CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y CONFIG_USB0_VBUS_PIN="PB10" +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 # CONFIG_CMD_FLASH is not set CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=sunxi-nand.0" diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index 1cd39d498f2..49be3fc4a2d 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -7,6 +7,8 @@ CONFIG_DRAM_CLK=432 CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_PHY_REALTEK=y CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index 02b3e69584f..b59d1786e6e 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -14,7 +14,9 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index 270bd7d351a..24b55bfa8cc 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -15,6 +15,8 @@ CONFIG_VIDEO_LCD_BL_EN="PM1" CONFIG_VIDEO_LCD_BL_PWM="PH13" CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index b06a3ae4238..794d6668d2f 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -8,7 +8,9 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig index 04ed79afb6d..928299e8a51 100644 --- a/configs/Cubieboard4_defconfig +++ b/configs/Cubieboard4_defconfig @@ -12,5 +12,7 @@ CONFIG_USB0_ID_DET="PH16" CONFIG_USB1_VBUS_PIN="PH14" CONFIG_USB3_VBUS_PIN="PH15" CONFIG_AXP_GPIO=y +CONFIG_SPL_STACK=0x18000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_SUN8I_RSB=y CONFIG_AXP809_POWER=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index 93a7932b76a..1027c5e3bf9 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -8,7 +8,9 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index a4f7b872ff0..560248dc5b1 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -13,7 +13,9 @@ CONFIG_SATAPWR="PH12" CONFIG_GMAC_TX_DELAY=1 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_SCSI_AHCI=y diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig index 13f958977be..8119b8b9cf6 100644 --- a/configs/Cubietruck_plus_defconfig +++ b/configs/Cubietruck_plus_defconfig @@ -16,6 +16,8 @@ CONFIG_I2C0_ENABLE=y CONFIG_AXP_GPIO=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Empire_electronix_d709_defconfig b/configs/Empire_electronix_d709_defconfig index a9bbe8bcffa..0187b896f87 100644 --- a/configs/Empire_electronix_d709_defconfig +++ b/configs/Empire_electronix_d709_defconfig @@ -16,7 +16,9 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Empire_electronix_m712_defconfig b/configs/Empire_electronix_m712_defconfig index fc1f26b7a99..6570b97ca4c 100644 --- a/configs/Empire_electronix_m712_defconfig +++ b/configs/Empire_electronix_m712_defconfig @@ -15,7 +15,9 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig index 24e8b5be1b5..3afe4c56ae4 100644 --- a/configs/Hummingbird_A31_defconfig +++ b/configs/Hummingbird_A31_defconfig @@ -9,6 +9,8 @@ CONFIG_USB2_VBUS_PIN="" CONFIG_VIDEO_VGA_VIA_LCD=y CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_PHY_REALTEK=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig index 482e0fb7a83..8bf7d1efba6 100644 --- a/configs/Hyundai_A7HD_defconfig +++ b/configs/Hyundai_A7HD_defconfig @@ -15,7 +15,9 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig index 58184422147..42cb24e88ef 100644 --- a/configs/Itead_Ibox_A20_defconfig +++ b/configs/Itead_Ibox_A20_defconfig @@ -8,7 +8,9 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_SATAPWR="PB8" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig index 6dd7b7ae702..d4692f8184a 100644 --- a/configs/Lamobo_R1_defconfig +++ b/configs/Lamobo_R1_defconfig @@ -10,7 +10,9 @@ CONFIG_SATAPWR="PB3" CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig index 9815348badd..2e0b0b71e14 100644 --- a/configs/LicheePi_Zero_defconfig +++ b/configs/LicheePi_Zero_defconfig @@ -5,4 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_V3S=y CONFIG_DRAM_CLK=360 # CONFIG_HAS_ARMV7_SECURE_BASE is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 # CONFIG_NETDEVICES is not set diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig index 25cea843739..dbafdd5bd80 100644 --- a/configs/Linksprite_pcDuino3_Nano_defconfig +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -10,7 +10,9 @@ CONFIG_SATAPWR="PH2" CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index de88dd0a303..ff6a4e8b379 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -8,7 +8,9 @@ CONFIG_DRAM_ZQ=122 CONFIG_SATAPWR="PH2" CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index 49dcfa098ee..279641551b3 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -6,7 +6,9 @@ CONFIG_MACH_SUN4I=y CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/M5208EVBE_defconfig b/configs/M5208EVBE_defconfig index bd2f3172211..4ab888f59ed 100644 --- a/configs/M5208EVBE_defconfig +++ b/configs/M5208EVBE_defconfig @@ -11,9 +11,11 @@ CONFIG_MCFTMR=y CONFIG_SYS_MONITOR_BASE=0x00000400 CONFIG_BOOTDELAY=1 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="-> " +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y @@ -32,6 +34,7 @@ CONFIG_SYS_I2C_SLAVE=0x7F CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_DM_ETH=y diff --git a/configs/M5235EVB_Flash32_defconfig b/configs/M5235EVB_Flash32_defconfig index e3b0146d841..2a799627841 100644 --- a/configs/M5235EVB_Flash32_defconfig +++ b/configs/M5235EVB_Flash32_defconfig @@ -12,8 +12,10 @@ CONFIG_MCFTMR=y CONFIG_SYS_MONITOR_BASE=0xFFC00400 CONFIG_BOOTDELAY=1 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set @@ -39,6 +41,7 @@ CONFIG_SYS_I2C_SLAVE=0x7F CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_32BIT=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_DM_ETH=y diff --git a/configs/M5235EVB_defconfig b/configs/M5235EVB_defconfig index d026400745b..5eeed2d2f31 100644 --- a/configs/M5235EVB_defconfig +++ b/configs/M5235EVB_defconfig @@ -11,9 +11,11 @@ CONFIG_MCFTMR=y CONFIG_SYS_MONITOR_BASE=0xFFE00400 CONFIG_BOOTDELAY=1 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="-> " +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set @@ -39,6 +41,7 @@ CONFIG_SYS_I2C_SLAVE=0x7F CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_DM_ETH=y diff --git a/configs/M5249EVB_defconfig b/configs/M5249EVB_defconfig index 9a360b0eae2..f99375b535e 100644 --- a/configs/M5249EVB_defconfig +++ b/configs/M5249EVB_defconfig @@ -13,7 +13,9 @@ CONFIG_SYS_MONITOR_BASE=0xFFE00400 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SYS_DEVICE_NULLDEV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_LOOPW=y CONFIG_CMD_MX_CYCLIC=y @@ -23,6 +25,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_MCFUART=y diff --git a/configs/M5253DEMO_defconfig b/configs/M5253DEMO_defconfig index 6f69acaee16..b3e6277a7e6 100644 --- a/configs/M5253DEMO_defconfig +++ b/configs/M5253DEMO_defconfig @@ -11,8 +11,10 @@ CONFIG_MCFTMR=y CONFIG_SYS_MONITOR_BASE=0xFF800400 CONFIG_BOOTDELAY=5 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_IDE=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5272C3_defconfig b/configs/M5272C3_defconfig index ed48264ed9c..e3f736bf630 100644 --- a/configs/M5272C3_defconfig +++ b/configs/M5272C3_defconfig @@ -11,9 +11,11 @@ CONFIG_MCFTMR=y CONFIG_SYS_MONITOR_BASE=0xFFE00400 CONFIG_BOOTDELAY=5 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="-> " +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set @@ -52,6 +54,7 @@ CONFIG_SYS_BR7_PRELIM=0x701 CONFIG_SYS_OR7_PRELIM=0xFFC0007C CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_DM_ETH=y diff --git a/configs/M5275EVB_defconfig b/configs/M5275EVB_defconfig index 2f517984b63..3420934caf7 100644 --- a/configs/M5275EVB_defconfig +++ b/configs/M5275EVB_defconfig @@ -13,9 +13,11 @@ CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="bootm ffe40000" # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="-> " +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set diff --git a/configs/M5282EVB_defconfig b/configs/M5282EVB_defconfig index 850d027f001..42940e1000a 100644 --- a/configs/M5282EVB_defconfig +++ b/configs/M5282EVB_defconfig @@ -11,9 +11,11 @@ CONFIG_MCFTMR=y CONFIG_SYS_MONITOR_BASE=0xFFE00400 CONFIG_BOOTDELAY=5 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="-> " +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set @@ -28,6 +30,7 @@ CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_DM_ETH=y diff --git a/configs/M53017EVB_defconfig b/configs/M53017EVB_defconfig index 005a3bcf08c..901a15d5061 100644 --- a/configs/M53017EVB_defconfig +++ b/configs/M53017EVB_defconfig @@ -13,9 +13,11 @@ CONFIG_BOOTDELAY=1 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock3 rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="-> " +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y @@ -34,6 +36,7 @@ CONFIG_SYS_I2C_SLAVE=0x7F CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/M5329AFEE_defconfig b/configs/M5329AFEE_defconfig index 83a3bb07aeb..0bce9d8f422 100644 --- a/configs/M5329AFEE_defconfig +++ b/configs/M5329AFEE_defconfig @@ -11,9 +11,11 @@ CONFIG_MCFTMR=y CONFIG_SYS_MONITOR_BASE=0x00000400 CONFIG_BOOTDELAY=1 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="-> " +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set @@ -34,6 +36,7 @@ CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_DM_ETH=y diff --git a/configs/M5329BFEE_defconfig b/configs/M5329BFEE_defconfig index 728f2b18e66..efc7733b44c 100644 --- a/configs/M5329BFEE_defconfig +++ b/configs/M5329BFEE_defconfig @@ -11,9 +11,11 @@ CONFIG_MCFTMR=y CONFIG_SYS_MONITOR_BASE=0x00000400 CONFIG_BOOTDELAY=1 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="-> " +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y @@ -35,6 +37,7 @@ CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/M5373EVB_defconfig b/configs/M5373EVB_defconfig index f61e344a518..920a86fa9aa 100644 --- a/configs/M5373EVB_defconfig +++ b/configs/M5373EVB_defconfig @@ -11,9 +11,11 @@ CONFIG_MCFTMR=y CONFIG_SYS_MONITOR_BASE=0x00000400 CONFIG_BOOTDELAY=1 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="-> " +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y @@ -35,6 +37,7 @@ CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/MCR3000_defconfig b/configs/MCR3000_defconfig index f99a830b546..236be1628ce 100644 --- a/configs/MCR3000_defconfig +++ b/configs/MCR3000_defconfig @@ -31,6 +31,7 @@ CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="S3K> " +CONFIG_SYS_PBSIZE=278 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_IMI is not set diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig index 3ed962d7cd9..4e678bdf051 100644 --- a/configs/MK808C_defconfig +++ b/configs/MK808C_defconfig @@ -5,7 +5,9 @@ CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index 4a9db732f92..efdddf7c2b3 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -153,6 +153,7 @@ CONFIG_BOARD_LATE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_PCI_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/MPC8548CDS_36BIT_defconfig b/configs/MPC8548CDS_36BIT_defconfig index 6933699771f..f2dd5d3f8cf 100644 --- a/configs/MPC8548CDS_36BIT_defconfig +++ b/configs/MPC8548CDS_36BIT_defconfig @@ -20,6 +20,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath # CONFIG_MISC_INIT_R is not set CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_I2C=y diff --git a/configs/MPC8548CDS_defconfig b/configs/MPC8548CDS_defconfig index ee9c14880c6..55acf63ae1d 100644 --- a/configs/MPC8548CDS_defconfig +++ b/configs/MPC8548CDS_defconfig @@ -19,6 +19,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath # CONFIG_MISC_INIT_R is not set CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_I2C=y diff --git a/configs/MPC8548CDS_legacy_defconfig b/configs/MPC8548CDS_legacy_defconfig index 97f641d71cd..4bd0b1a27b7 100644 --- a/configs/MPC8548CDS_legacy_defconfig +++ b/configs/MPC8548CDS_legacy_defconfig @@ -20,6 +20,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath # CONFIG_MISC_INIT_R is not set CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_I2C=y diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig index 071169fd298..7a4b224bf2a 100644 --- a/configs/MSI_Primo73_defconfig +++ b/configs/MSI_Primo73_defconfig @@ -10,7 +10,9 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index e77b0072923..bb820fd0a39 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -13,6 +13,8 @@ CONFIG_VIDEO_LCD_BL_EN="PA25" CONFIG_VIDEO_LCD_BL_PWM="PH13" CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_USB_MUSB_HOST=y diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index 61d97831975..c88cfd6aa32 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -5,6 +5,8 @@ CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index c6bfe381db8..8ee6791408a 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -8,6 +8,8 @@ CONFIG_INITIAL_USB_SCAN_DELAY=2000 CONFIG_USB1_VBUS_PIN="PC27" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_PHY_REALTEK=y CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index d3a01275cf5..429baf3faf2 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -8,7 +8,9 @@ CONFIG_VIDEO_VGA=y CONFIG_VIDEO_COMPOSITE=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig index 2b9bca13d08..48dad606b88 100644 --- a/configs/Mele_I7_defconfig +++ b/configs/Mele_I7_defconfig @@ -7,6 +7,8 @@ CONFIG_DRAM_ZQ=120 CONFIG_USB1_VBUS_PIN="PC27" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_PHY_REALTEK=y CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index 77cb464c932..ce962395a25 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -9,7 +9,9 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_VIDEO_VGA=y CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index f2ee3b1c0cf..a426729700e 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -9,7 +9,9 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_VIDEO_COMPOSITE=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index be6dd417545..b84a2aebe20 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -7,6 +7,8 @@ CONFIG_DRAM_ZQ=120 CONFIG_USB1_VBUS_PIN="PC27" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_PHY_REALTEK=y CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig index c5d1f40df39..3709a11ec03 100644 --- a/configs/Merrii_A80_Optimus_defconfig +++ b/configs/Merrii_A80_Optimus_defconfig @@ -12,5 +12,7 @@ CONFIG_USB0_ID_DET="PH3" CONFIG_USB1_VBUS_PIN="PH4" CONFIG_USB3_VBUS_PIN="PH5" CONFIG_AXP_GPIO=y +CONFIG_SPL_STACK=0x18000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_SUN8I_RSB=y CONFIG_AXP809_POWER=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index e8bc1485766..76b6b7d2bce 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -6,7 +6,9 @@ CONFIG_MACH_SUN4I=y CONFIG_USB0_VBUS_PIN="PB9" CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Nintendo_NES_Classic_Edition_defconfig b/configs/Nintendo_NES_Classic_Edition_defconfig index b66023418ae..5b1a1d40614 100644 --- a/configs/Nintendo_NES_Classic_Edition_defconfig +++ b/configs/Nintendo_NES_Classic_Edition_defconfig @@ -9,6 +9,8 @@ CONFIG_DRAM_ODT_EN=y CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_AXP_GPIO=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 # CONFIG_CMD_FLASH is not set CONFIG_CMD_MTDPARTS=y # CONFIG_MMC is not set diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig index d69bc7af93b..e7cf38ac7d1 100644 --- a/configs/Orangepi_defconfig +++ b/configs/Orangepi_defconfig @@ -12,7 +12,9 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index 508cace424c..494edf0625e 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -14,7 +14,9 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig index b44264f41d6..6c4142c200b 100644 --- a/configs/P1010RDB-PA_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig @@ -28,15 +28,30 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x2000 CONFIG_SPL_NAND_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_INIT_MINIMAL=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_RELOC_TEXT_BASE=0xd003d000 +CONFIG_SPL_RELOC_STACK=0xd003fff0 +CONFIG_TPL_GD_ADDR=0xd002c000 +CONFIG_TPL_RELOC_TEXT_BASE=0xd0001000 +CONFIG_TPL_RELOC_STACK=0xd0030000 +CONFIG_TPL_RELOC_MALLOC=y +CONFIG_TPL_RELOC_MALLOC_ADDR=0xd0034000 +CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_TPL=y +CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_TPL_DRIVERS_MISC=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C=y CONFIG_TPL_MPC8XXX_INIT_DDR=y CONFIG_TPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -62,6 +77,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_TPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y diff --git a/configs/P1010RDB-PA_36BIT_NOR_defconfig b/configs/P1010RDB-PA_36BIT_NOR_defconfig index bd5d7b652b4..53f551eb378 100644 --- a/configs/P1010RDB-PA_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PA_36BIT_NOR_defconfig @@ -20,7 +20,10 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -45,6 +48,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -85,3 +89,4 @@ CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_EHCI_FSL=y CONFIG_ADDR_MAP=y +CONFIG_COMMON_INIT_DDR=y diff --git a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig index 516198b9634..324ad908bb0 100644 --- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig @@ -26,11 +26,22 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x18000 CONFIG_SPL_MMC_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xd0018000 +CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000 +CONFIG_SPL_RELOC_STACK=0xd001c000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -56,6 +67,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig index a545cffe4d9..2299f450a97 100644 --- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig @@ -29,11 +29,22 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x18000 CONFIG_SPL_SPI_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xd0018000 +CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000 +CONFIG_SPL_RELOC_STACK=0xd001c000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -59,6 +70,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig index 9cb7f55ecf4..5813c75f10a 100644 --- a/configs/P1010RDB-PA_NAND_defconfig +++ b/configs/P1010RDB-PA_NAND_defconfig @@ -27,15 +27,30 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x2000 CONFIG_SPL_NAND_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_INIT_MINIMAL=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_RELOC_TEXT_BASE=0xd003d000 +CONFIG_SPL_RELOC_STACK=0xd003fff0 +CONFIG_TPL_GD_ADDR=0xd002c000 +CONFIG_TPL_RELOC_TEXT_BASE=0xd0001000 +CONFIG_TPL_RELOC_STACK=0xd0030000 +CONFIG_TPL_RELOC_MALLOC=y +CONFIG_TPL_RELOC_MALLOC_ADDR=0xd0034000 +CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_TPL=y +CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_TPL_DRIVERS_MISC=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C=y CONFIG_TPL_MPC8XXX_INIT_DDR=y CONFIG_TPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -61,6 +76,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_TPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig index 510035739fd..efdf1c99621 100644 --- a/configs/P1010RDB-PA_NOR_defconfig +++ b/configs/P1010RDB-PA_NOR_defconfig @@ -19,7 +19,10 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -44,6 +47,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -83,3 +87,4 @@ CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_EHCI_FSL=y +CONFIG_COMMON_INIT_DDR=y diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig index 160f4a0dfde..a51f9acd586 100644 --- a/configs/P1010RDB-PA_SDCARD_defconfig +++ b/configs/P1010RDB-PA_SDCARD_defconfig @@ -25,11 +25,22 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x18000 CONFIG_SPL_MMC_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xd0018000 +CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000 +CONFIG_SPL_RELOC_STACK=0xd001c000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -55,6 +66,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1010RDB-PA_SPIFLASH_defconfig b/configs/P1010RDB-PA_SPIFLASH_defconfig index cf61ca3b922..c2b5d7762ce 100644 --- a/configs/P1010RDB-PA_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_SPIFLASH_defconfig @@ -28,11 +28,22 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x18000 CONFIG_SPL_SPI_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xd0018000 +CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000 +CONFIG_SPL_RELOC_STACK=0xd001c000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -58,6 +69,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig index 67659cfc906..4caf43dade2 100644 --- a/configs/P1010RDB-PB_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig @@ -29,15 +29,30 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x2000 CONFIG_SPL_NAND_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_INIT_MINIMAL=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_RELOC_TEXT_BASE=0xd003d000 +CONFIG_SPL_RELOC_STACK=0xd003fff0 +CONFIG_TPL_GD_ADDR=0xd002c000 +CONFIG_TPL_RELOC_TEXT_BASE=0xd0001000 +CONFIG_TPL_RELOC_STACK=0xd0030000 +CONFIG_TPL_RELOC_MALLOC=y +CONFIG_TPL_RELOC_MALLOC_ADDR=0xd0034000 +CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_TPL=y +CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_TPL_DRIVERS_MISC=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C=y CONFIG_TPL_MPC8XXX_INIT_DDR=y CONFIG_TPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -63,6 +78,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_TPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y diff --git a/configs/P1010RDB-PB_36BIT_NOR_defconfig b/configs/P1010RDB-PB_36BIT_NOR_defconfig index 228db54c22c..146c556062d 100644 --- a/configs/P1010RDB-PB_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PB_36BIT_NOR_defconfig @@ -21,7 +21,10 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -46,6 +49,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -87,3 +91,4 @@ CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_EHCI_FSL=y CONFIG_ADDR_MAP=y +CONFIG_COMMON_INIT_DDR=y diff --git a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig index 2774a5c5c44..50053876f8e 100644 --- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig @@ -27,11 +27,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x18000 CONFIG_SPL_MMC_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xd0018000 +CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000 +CONFIG_SPL_RELOC_STACK=0xd001c000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -57,6 +68,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig index 240aa3a4c2e..6f0cd359abb 100644 --- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig @@ -30,11 +30,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x18000 CONFIG_SPL_SPI_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xd0018000 +CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000 +CONFIG_SPL_RELOC_STACK=0xd001c000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -60,6 +71,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig index 18215d8f358..16b52196aeb 100644 --- a/configs/P1010RDB-PB_NAND_defconfig +++ b/configs/P1010RDB-PB_NAND_defconfig @@ -28,15 +28,30 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x2000 CONFIG_SPL_NAND_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_INIT_MINIMAL=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_RELOC_TEXT_BASE=0xd003d000 +CONFIG_SPL_RELOC_STACK=0xd003fff0 +CONFIG_TPL_GD_ADDR=0xd002c000 +CONFIG_TPL_RELOC_TEXT_BASE=0xd0001000 +CONFIG_TPL_RELOC_STACK=0xd0030000 +CONFIG_TPL_RELOC_MALLOC=y +CONFIG_TPL_RELOC_MALLOC_ADDR=0xd0034000 +CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_TPL=y +CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_TPL_DRIVERS_MISC=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C=y CONFIG_TPL_MPC8XXX_INIT_DDR=y CONFIG_TPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -62,6 +77,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_TPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y diff --git a/configs/P1010RDB-PB_NOR_defconfig b/configs/P1010RDB-PB_NOR_defconfig index 21ef7a0d76f..bcf4c090dd3 100644 --- a/configs/P1010RDB-PB_NOR_defconfig +++ b/configs/P1010RDB-PB_NOR_defconfig @@ -20,7 +20,10 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -45,6 +48,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -85,3 +89,4 @@ CONFIG_DM_SPI=y CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_EHCI_FSL=y +CONFIG_COMMON_INIT_DDR=y diff --git a/configs/P1010RDB-PB_SDCARD_defconfig b/configs/P1010RDB-PB_SDCARD_defconfig index 4ad9633bf60..6d3be4303a2 100644 --- a/configs/P1010RDB-PB_SDCARD_defconfig +++ b/configs/P1010RDB-PB_SDCARD_defconfig @@ -26,11 +26,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x18000 CONFIG_SPL_MMC_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xd0018000 +CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000 +CONFIG_SPL_RELOC_STACK=0xd001c000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -56,6 +67,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1010RDB-PB_SPIFLASH_defconfig b/configs/P1010RDB-PB_SPIFLASH_defconfig index 9b05f484682..a54f7eab5f2 100644 --- a/configs/P1010RDB-PB_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_SPIFLASH_defconfig @@ -29,11 +29,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x18000 CONFIG_SPL_SPI_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xd0018000 +CONFIG_SPL_RELOC_TEXT_BASE=0xd0001000 +CONFIG_SPL_RELOC_STACK=0xd001c000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xd0020000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x20000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -59,6 +70,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=1 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig index 56b984e5ae6..80bfe31d79a 100644 --- a/configs/P1020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig @@ -29,15 +29,30 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x1000 CONFIG_SPL_NAND_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_INIT_MINIMAL=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_RELOC_TEXT_BASE=0xf8fbe000 +CONFIG_SPL_RELOC_STACK=0xf8fbfff0 +CONFIG_TPL_GD_ADDR=0xf8fac000 +CONFIG_TPL_RELOC_TEXT_BASE=0xf8f81000 +CONFIG_TPL_RELOC_STACK=0xf8fb0000 +CONFIG_TPL_RELOC_MALLOC=y +CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000 +CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_TPL=y +CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C=y CONFIG_TPL_MPC8XXX_INIT_DDR=y CONFIG_TPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -72,6 +87,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_TPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y diff --git a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig index 4407a02a7d9..2619ef0fb17 100644 --- a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig @@ -28,12 +28,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_MMC_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xf8f9c000 +CONFIG_SPL_RELOC_STACK=0xf8f9d000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -65,6 +75,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig index ee0fdd6657d..e37c74bd1f1 100644 --- a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig @@ -31,12 +31,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_SPI_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xf8f9c000 +CONFIG_SPL_RELOC_STACK=0xf8f9d000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -68,6 +78,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1020RDB-PC_36BIT_defconfig b/configs/P1020RDB-PC_36BIT_defconfig index bbfc4a5bcff..425d66891d3 100644 --- a/configs/P1020RDB-PC_36BIT_defconfig +++ b/configs/P1020RDB-PC_36BIT_defconfig @@ -22,8 +22,11 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$con CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -54,6 +57,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -97,3 +101,4 @@ CONFIG_USB=y CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y +CONFIG_COMMON_INIT_DDR=y diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig index 00d847d50af..860636292d2 100644 --- a/configs/P1020RDB-PC_NAND_defconfig +++ b/configs/P1020RDB-PC_NAND_defconfig @@ -28,15 +28,30 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x1000 CONFIG_SPL_NAND_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_INIT_MINIMAL=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_RELOC_TEXT_BASE=0xf8fbe000 +CONFIG_SPL_RELOC_STACK=0xf8fbfff0 +CONFIG_TPL_GD_ADDR=0xf8fac000 +CONFIG_TPL_RELOC_TEXT_BASE=0xf8f81000 +CONFIG_TPL_RELOC_STACK=0xf8fb0000 +CONFIG_TPL_RELOC_MALLOC=y +CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000 +CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_TPL=y +CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C=y CONFIG_TPL_MPC8XXX_INIT_DDR=y CONFIG_TPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -71,6 +86,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_TPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y diff --git a/configs/P1020RDB-PC_SDCARD_defconfig b/configs/P1020RDB-PC_SDCARD_defconfig index feb00ea9161..c0d78c9f486 100644 --- a/configs/P1020RDB-PC_SDCARD_defconfig +++ b/configs/P1020RDB-PC_SDCARD_defconfig @@ -27,12 +27,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_MMC_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xf8f9c000 +CONFIG_SPL_RELOC_STACK=0xf8f9d000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -64,6 +74,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1020RDB-PC_SPIFLASH_defconfig b/configs/P1020RDB-PC_SPIFLASH_defconfig index f18f4b2ce15..debd83ed93e 100644 --- a/configs/P1020RDB-PC_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_SPIFLASH_defconfig @@ -30,12 +30,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_SPI_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xf8f9c000 +CONFIG_SPL_RELOC_STACK=0xf8f9d000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -67,6 +77,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1020RDB-PC_defconfig b/configs/P1020RDB-PC_defconfig index aec0d47acb7..3ecdd1b6dd3 100644 --- a/configs/P1020RDB-PC_defconfig +++ b/configs/P1020RDB-PC_defconfig @@ -21,8 +21,11 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$con CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -53,6 +56,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -95,3 +99,4 @@ CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y +CONFIG_COMMON_INIT_DDR=y diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig index 0d713624d48..d770fc7ba7e 100644 --- a/configs/P1020RDB-PD_NAND_defconfig +++ b/configs/P1020RDB-PD_NAND_defconfig @@ -28,15 +28,30 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x1000 CONFIG_SPL_NAND_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_INIT_MINIMAL=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_RELOC_TEXT_BASE=0xf8fbe000 +CONFIG_SPL_RELOC_STACK=0xf8fbfff0 +CONFIG_TPL_GD_ADDR=0xf8fac000 +CONFIG_TPL_RELOC_TEXT_BASE=0xf8f81000 +CONFIG_TPL_RELOC_STACK=0xf8fb0000 +CONFIG_TPL_RELOC_MALLOC=y +CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000 +CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_TPL=y +CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C=y CONFIG_TPL_MPC8XXX_INIT_DDR=y CONFIG_TPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -74,6 +89,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_TPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y diff --git a/configs/P1020RDB-PD_SDCARD_defconfig b/configs/P1020RDB-PD_SDCARD_defconfig index b50dfcbc392..db484c0d189 100644 --- a/configs/P1020RDB-PD_SDCARD_defconfig +++ b/configs/P1020RDB-PD_SDCARD_defconfig @@ -27,12 +27,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_MMC_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xf8f9c000 +CONFIG_SPL_RELOC_STACK=0xf8f9d000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -67,6 +77,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig index 6649f5b2fea..d9d63076123 100644 --- a/configs/P1020RDB-PD_SPIFLASH_defconfig +++ b/configs/P1020RDB-PD_SPIFLASH_defconfig @@ -30,12 +30,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_SPI_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xf8f9c000 +CONFIG_SPL_RELOC_STACK=0xf8f9d000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -70,6 +80,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig index cbbdb0fb113..d78dc0d9ca0 100644 --- a/configs/P1020RDB-PD_defconfig +++ b/configs/P1020RDB-PD_defconfig @@ -21,8 +21,11 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$con CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -56,6 +59,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -99,3 +103,4 @@ CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y +CONFIG_COMMON_INIT_DDR=y diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig index e167468ed38..ac4d4579bb7 100644 --- a/configs/P2020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig @@ -29,15 +29,30 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x1000 CONFIG_SPL_NAND_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_INIT_MINIMAL=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_RELOC_TEXT_BASE=0xf8ffe000 +CONFIG_SPL_RELOC_STACK=0xf8fffff0 +CONFIG_TPL_GD_ADDR=0xf8fac000 +CONFIG_TPL_RELOC_TEXT_BASE=0xf8f81000 +CONFIG_TPL_RELOC_STACK=0xf8fb0000 +CONFIG_TPL_RELOC_MALLOC=y +CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000 +CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_TPL=y +CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C=y CONFIG_TPL_MPC8XXX_INIT_DDR=y CONFIG_TPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -76,6 +91,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_TPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y diff --git a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig index 1e15552edc7..b2a5a72143d 100644 --- a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig @@ -28,12 +28,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_MMC_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xf8f9c000 +CONFIG_SPL_RELOC_STACK=0xf8f9d000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x5b000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -69,6 +79,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig index cf0ae5da3cf..42e31b4e22c 100644 --- a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig @@ -31,12 +31,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_SPI_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xf8f9c000 +CONFIG_SPL_RELOC_STACK=0xf8f9d000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x5b000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -72,6 +82,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P2020RDB-PC_36BIT_defconfig b/configs/P2020RDB-PC_36BIT_defconfig index bd189b965b0..258442b76cb 100644 --- a/configs/P2020RDB-PC_36BIT_defconfig +++ b/configs/P2020RDB-PC_36BIT_defconfig @@ -22,8 +22,11 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$con CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -58,6 +61,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -102,3 +106,4 @@ CONFIG_USB=y CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_ADDR_MAP=y +CONFIG_COMMON_INIT_DDR=y diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig index 29d90c91400..69ca044e5a2 100644 --- a/configs/P2020RDB-PC_NAND_defconfig +++ b/configs/P2020RDB-PC_NAND_defconfig @@ -28,15 +28,30 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x1000 CONFIG_SPL_NAND_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_INIT_MINIMAL=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_RELOC_TEXT_BASE=0xf8ffe000 +CONFIG_SPL_RELOC_STACK=0xf8fffff0 +CONFIG_TPL_GD_ADDR=0xf8fac000 +CONFIG_TPL_RELOC_TEXT_BASE=0xf8f81000 +CONFIG_TPL_RELOC_STACK=0xf8fb0000 +CONFIG_TPL_RELOC_MALLOC=y +CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000 +CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_TPL=y +CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C=y CONFIG_TPL_MPC8XXX_INIT_DDR=y CONFIG_TPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -75,6 +90,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_TPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_TPL_SYS_I2C_LEGACY=y diff --git a/configs/P2020RDB-PC_SDCARD_defconfig b/configs/P2020RDB-PC_SDCARD_defconfig index 540999bef21..621e5b035f2 100644 --- a/configs/P2020RDB-PC_SDCARD_defconfig +++ b/configs/P2020RDB-PC_SDCARD_defconfig @@ -27,12 +27,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_MMC_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xf8f9c000 +CONFIG_SPL_RELOC_STACK=0xf8f9d000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x5b000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -68,6 +78,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P2020RDB-PC_SPIFLASH_defconfig b/configs/P2020RDB-PC_SPIFLASH_defconfig index 0881e35476a..04b10d36c52 100644 --- a/configs/P2020RDB-PC_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_SPIFLASH_defconfig @@ -30,12 +30,22 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_SPI_BOOT=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_GD_ADDR=0xf8f9c000 +CONFIG_SPL_RELOC_STACK=0xf8f9d000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x5b000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -71,6 +81,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y diff --git a/configs/P2020RDB-PC_defconfig b/configs/P2020RDB-PC_defconfig index eba11d340ac..fb1a239f6a2 100644 --- a/configs/P2020RDB-PC_defconfig +++ b/configs/P2020RDB-PC_defconfig @@ -21,8 +21,11 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$con CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 @@ -57,6 +60,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF CONFIG_SYS_BR3_PRELIM_BOOL=y CONFIG_SYS_BR3_PRELIM=0xFFA00801 CONFIG_SYS_OR3_PRELIM=0xFFF009F7 +CONFIG_SPL_COMMON_INIT_DDR=y CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y @@ -100,3 +104,4 @@ CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y +CONFIG_COMMON_INIT_DDR=y diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig index 9717f50834a..9389d992562 100644 --- a/configs/P2041RDB_NAND_defconfig +++ b/configs/P2041RDB_NAND_defconfig @@ -24,6 +24,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig index 50065c4a967..31d5814d55c 100644 --- a/configs/P2041RDB_SDCARD_defconfig +++ b/configs/P2041RDB_SDCARD_defconfig @@ -24,6 +24,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig index 25f32c03c14..7e913c81366 100644 --- a/configs/P2041RDB_SPIFLASH_defconfig +++ b/configs/P2041RDB_SPIFLASH_defconfig @@ -26,6 +26,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/P2041RDB_defconfig b/configs/P2041RDB_defconfig index 29e94fcd094..23165b83f74 100644 --- a/configs/P2041RDB_defconfig +++ b/configs/P2041RDB_defconfig @@ -22,6 +22,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/P3041DS_NAND_defconfig b/configs/P3041DS_NAND_defconfig index 638b409b963..7c5b6d288b0 100644 --- a/configs/P3041DS_NAND_defconfig +++ b/configs/P3041DS_NAND_defconfig @@ -24,6 +24,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/P3041DS_SDCARD_defconfig b/configs/P3041DS_SDCARD_defconfig index e05ea44d2c2..41ec73a6be4 100644 --- a/configs/P3041DS_SDCARD_defconfig +++ b/configs/P3041DS_SDCARD_defconfig @@ -24,6 +24,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/P3041DS_SPIFLASH_defconfig b/configs/P3041DS_SPIFLASH_defconfig index 9bfde175420..bdbf2e959e3 100644 --- a/configs/P3041DS_SPIFLASH_defconfig +++ b/configs/P3041DS_SPIFLASH_defconfig @@ -26,6 +26,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/P3041DS_defconfig b/configs/P3041DS_defconfig index d62a200871a..953cbd4b0b7 100644 --- a/configs/P3041DS_defconfig +++ b/configs/P3041DS_defconfig @@ -22,6 +22,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/P4080DS_SDCARD_defconfig b/configs/P4080DS_SDCARD_defconfig index 63f8e6aa9d4..e603f81287e 100644 --- a/configs/P4080DS_SDCARD_defconfig +++ b/configs/P4080DS_SDCARD_defconfig @@ -24,6 +24,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/P4080DS_SPIFLASH_defconfig b/configs/P4080DS_SPIFLASH_defconfig index 56da9d80b73..90b4688ea2e 100644 --- a/configs/P4080DS_SPIFLASH_defconfig +++ b/configs/P4080DS_SPIFLASH_defconfig @@ -26,6 +26,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/P4080DS_defconfig b/configs/P4080DS_defconfig index ec5d2f9ac6c..85acd7e427f 100644 --- a/configs/P4080DS_defconfig +++ b/configs/P4080DS_defconfig @@ -22,6 +22,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/P5040DS_NAND_defconfig b/configs/P5040DS_NAND_defconfig index 2ac298a4314..6e0bdb2e130 100644 --- a/configs/P5040DS_NAND_defconfig +++ b/configs/P5040DS_NAND_defconfig @@ -24,6 +24,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/P5040DS_SDCARD_defconfig b/configs/P5040DS_SDCARD_defconfig index a1ddca57750..e040fab7cb8 100644 --- a/configs/P5040DS_SDCARD_defconfig +++ b/configs/P5040DS_SDCARD_defconfig @@ -24,6 +24,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/P5040DS_SPIFLASH_defconfig b/configs/P5040DS_SPIFLASH_defconfig index 32fec67e949..1e1a2f80365 100644 --- a/configs/P5040DS_SPIFLASH_defconfig +++ b/configs/P5040DS_SPIFLASH_defconfig @@ -26,6 +26,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/P5040DS_defconfig b/configs/P5040DS_defconfig index 48bd2b6f1bf..ec897c33231 100644 --- a/configs/P5040DS_defconfig +++ b/configs/P5040DS_defconfig @@ -22,6 +22,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig index ef427490ff9..f186f247eb6 100644 --- a/configs/SBx81LIFKW_defconfig +++ b/configs/SBx81LIFKW_defconfig @@ -13,6 +13,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="kirkwood-atl-sbx81lifkw" CONFIG_IDENT_STRING="\nSBx81LIFKW" CONFIG_SYS_LOAD_ADDR=0x1000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y @@ -20,6 +22,8 @@ CONFIG_SILENT_U_BOOT_ONLY=y CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y diff --git a/configs/SBx81LIFXCAT_defconfig b/configs/SBx81LIFXCAT_defconfig index 687e064fa8f..9d579091a82 100644 --- a/configs/SBx81LIFXCAT_defconfig +++ b/configs/SBx81LIFXCAT_defconfig @@ -13,6 +13,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="kirkwood-atl-sbx81lifxcat" CONFIG_IDENT_STRING="\nSBx81LIFXCAT" CONFIG_SYS_LOAD_ADDR=0x1000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_SILENT_CONSOLE=y @@ -20,6 +22,8 @@ CONFIG_SILENT_U_BOOT_ONLY=y CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig index 238b0073e79..2d33331f3d3 100644 --- a/configs/Sinlinx_SinA31s_defconfig +++ b/configs/Sinlinx_SinA31s_defconfig @@ -10,6 +10,8 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_PHY_REALTEK=y CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index 4eb5300b046..fcee14b5462 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -13,6 +13,8 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_DFU=y CONFIG_DFU_RAM=y CONFIG_FASTBOOT_CMD_OEM_FORMAT=y diff --git a/configs/Sinovoip_BPI_M2_defconfig b/configs/Sinovoip_BPI_M2_defconfig index aba95270eb2..c080a247105 100644 --- a/configs/Sinovoip_BPI_M2_defconfig +++ b/configs/Sinovoip_BPI_M2_defconfig @@ -7,6 +7,8 @@ CONFIG_DRAM_CLK=432 CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_PHY_REALTEK=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig index d27f495f48f..32ec5deca7d 100644 --- a/configs/Sinovoip_BPI_M3_defconfig +++ b/configs/Sinovoip_BPI_M3_defconfig @@ -17,6 +17,8 @@ CONFIG_AXP_GPIO=y CONFIG_SATAPWR="PD25" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_PHY_REALTEK=y CONFIG_SUN8I_EMAC=y CONFIG_AXP_DCDC5_VOLT=1200 diff --git a/configs/Sunchip_CX-A99_defconfig b/configs/Sunchip_CX-A99_defconfig index bb62ae9a7a9..749bf1cff9d 100644 --- a/configs/Sunchip_CX-A99_defconfig +++ b/configs/Sunchip_CX-A99_defconfig @@ -12,3 +12,5 @@ CONFIG_USB0_VBUS_PIN="PH15" CONFIG_USB1_VBUS_PIN="PL7" CONFIG_USB3_VBUS_PIN="PL8" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x18000 +CONFIG_SYS_PBSIZE=1024 diff --git a/configs/T1024RDB_NAND_defconfig b/configs/T1024RDB_NAND_defconfig index c86c5c15309..2eb985823ec 100644 --- a/configs/T1024RDB_NAND_defconfig +++ b/configs/T1024RDB_NAND_defconfig @@ -32,13 +32,24 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_NAND_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/T1024RDB_SDCARD_defconfig b/configs/T1024RDB_SDCARD_defconfig index a820d2969e3..9daf7fd5ef7 100644 --- a/configs/T1024RDB_SDCARD_defconfig +++ b/configs/T1024RDB_SDCARD_defconfig @@ -33,12 +33,23 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_MMC_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/T1024RDB_SPIFLASH_defconfig b/configs/T1024RDB_SPIFLASH_defconfig index 2708e9f0911..ee9292a4fb9 100644 --- a/configs/T1024RDB_SPIFLASH_defconfig +++ b/configs/T1024RDB_SPIFLASH_defconfig @@ -36,12 +36,23 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_SPI_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/T1024RDB_defconfig b/configs/T1024RDB_defconfig index 3359c59958e..0f7e062380f 100644 --- a/configs/T1024RDB_defconfig +++ b/configs/T1024RDB_defconfig @@ -25,6 +25,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/T1042D4RDB_NAND_defconfig b/configs/T1042D4RDB_NAND_defconfig index 978c6c0bb65..91a83007ce8 100644 --- a/configs/T1042D4RDB_NAND_defconfig +++ b/configs/T1042D4RDB_NAND_defconfig @@ -28,13 +28,24 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_NAND_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DM=y diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig index 3cb72f03d6b..32fed7a33a4 100644 --- a/configs/T1042D4RDB_SDCARD_defconfig +++ b/configs/T1042D4RDB_SDCARD_defconfig @@ -29,12 +29,23 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_MMC_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DM=y diff --git a/configs/T1042D4RDB_SPIFLASH_defconfig b/configs/T1042D4RDB_SPIFLASH_defconfig index 662c93691d1..638ed7147a7 100644 --- a/configs/T1042D4RDB_SPIFLASH_defconfig +++ b/configs/T1042D4RDB_SPIFLASH_defconfig @@ -32,12 +32,23 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_SPI_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0x7800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DM=y diff --git a/configs/T1042D4RDB_defconfig b/configs/T1042D4RDB_defconfig index 23f116fb7cc..f05e66e0d37 100644 --- a/configs/T1042D4RDB_defconfig +++ b/configs/T1042D4RDB_defconfig @@ -21,6 +21,7 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DM=y diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig index f5fc3e19b58..b71659a6600 100644 --- a/configs/T2080QDS_NAND_defconfig +++ b/configs/T2080QDS_NAND_defconfig @@ -33,13 +33,24 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_NAND_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig index d440ab69a68..1b8ef0cb365 100644 --- a/configs/T2080QDS_SDCARD_defconfig +++ b/configs/T2080QDS_SDCARD_defconfig @@ -34,12 +34,23 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_MMC_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/T2080QDS_SECURE_BOOT_defconfig b/configs/T2080QDS_SECURE_BOOT_defconfig index 0464557c772..d9822bab3fd 100644 --- a/configs/T2080QDS_SECURE_BOOT_defconfig +++ b/configs/T2080QDS_SECURE_BOOT_defconfig @@ -25,6 +25,7 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr" CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig index f3ae31bf222..bcef31a665f 100644 --- a/configs/T2080QDS_SPIFLASH_defconfig +++ b/configs/T2080QDS_SPIFLASH_defconfig @@ -37,12 +37,23 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_SPI_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig index 81623471926..6158be76fe5 100644 --- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig @@ -26,6 +26,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig index 51184a08d7c..fd658454c4a 100644 --- a/configs/T2080QDS_defconfig +++ b/configs/T2080QDS_defconfig @@ -26,6 +26,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_I2C=y diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig index 1c73bfb3d01..9e8e3ea8b5a 100644 --- a/configs/T2080RDB_NAND_defconfig +++ b/configs/T2080RDB_NAND_defconfig @@ -31,13 +31,24 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_NAND_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_MEMTEST=y diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig index f6668720cf3..b6a0b857a72 100644 --- a/configs/T2080RDB_SDCARD_defconfig +++ b/configs/T2080RDB_SDCARD_defconfig @@ -32,12 +32,23 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_MMC_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_MEMTEST=y diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig index 2578b0eabb8..b0f0d165cdd 100644 --- a/configs/T2080RDB_SPIFLASH_defconfig +++ b/configs/T2080RDB_SPIFLASH_defconfig @@ -35,12 +35,23 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_SPI_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_MEMTEST=y diff --git a/configs/T2080RDB_defconfig b/configs/T2080RDB_defconfig index 3d3dc7c8a43..66d043309b3 100644 --- a/configs/T2080RDB_defconfig +++ b/configs/T2080RDB_defconfig @@ -24,6 +24,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_MEMTEST=y diff --git a/configs/T2080RDB_revD_NAND_defconfig b/configs/T2080RDB_revD_NAND_defconfig index e9d78e92c95..feba8e54b5c 100644 --- a/configs/T2080RDB_revD_NAND_defconfig +++ b/configs/T2080RDB_revD_NAND_defconfig @@ -32,13 +32,24 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_NAND_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_MEMTEST=y diff --git a/configs/T2080RDB_revD_SDCARD_defconfig b/configs/T2080RDB_revD_SDCARD_defconfig index 9951efbb3d5..0495786bc5f 100644 --- a/configs/T2080RDB_revD_SDCARD_defconfig +++ b/configs/T2080RDB_revD_SDCARD_defconfig @@ -33,12 +33,23 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_MMC_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_MEMTEST=y diff --git a/configs/T2080RDB_revD_SPIFLASH_defconfig b/configs/T2080RDB_revD_SPIFLASH_defconfig index 59f67d88a02..bb7c711d557 100644 --- a/configs/T2080RDB_revD_SPIFLASH_defconfig +++ b/configs/T2080RDB_revD_SPIFLASH_defconfig @@ -36,12 +36,23 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_SPI_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_MEMTEST=y diff --git a/configs/T2080RDB_revD_defconfig b/configs/T2080RDB_revD_defconfig index 0c954e51386..56b174fad74 100644 --- a/configs/T2080RDB_revD_defconfig +++ b/configs/T2080RDB_revD_defconfig @@ -25,6 +25,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_MEMTEST=y diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig index 43354c0af2b..fb35c83f1b6 100644 --- a/configs/T4240RDB_SDCARD_defconfig +++ b/configs/T4240RDB_SDCARD_defconfig @@ -30,12 +30,23 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_MAX_SIZE=0x28000 +CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_MMC_BOOT=y CONFIG_SPL_FSL_PBL=y +CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y +CONFIG_SPL_FLUSH_IMAGE=y +CONFIG_SPL_SKIP_RELOCATE=y +CONFIG_SPL_GD_ADDR=0xfffc8000 +CONFIG_SPL_RELOC_STACK=0xfffd8000 +CONFIG_SPL_RELOC_MALLOC=y +CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000 +CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DM=y diff --git a/configs/T4240RDB_defconfig b/configs/T4240RDB_defconfig index 40bcbfe98b5..4f19024a6be 100644 --- a/configs/T4240RDB_defconfig +++ b/configs/T4240RDB_defconfig @@ -22,6 +22,7 @@ CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudra CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DM=y diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig index b021b0a8865..4e6652db18f 100644 --- a/configs/UTOO_P66_defconfig +++ b/configs/UTOO_P66_defconfig @@ -20,7 +20,9 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_TL059WV5C0=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig index 101ce57aa44..f63d18c327f 100644 --- a/configs/Wexler_TAB7200_defconfig +++ b/configs/Wexler_TAB7200_defconfig @@ -13,7 +13,9 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig index 83b82133b96..09608dd1cc2 100644 --- a/configs/Wits_Pro_A20_DKT_defconfig +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -12,7 +12,9 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/Wobo_i5_defconfig b/configs/Wobo_i5_defconfig index e0687bf887d..ab919c0795a 100644 --- a/configs/Wobo_i5_defconfig +++ b/configs/Wobo_i5_defconfig @@ -7,7 +7,9 @@ CONFIG_DRAM_CLK=432 CONFIG_MMC0_CD_PIN="PB3" CONFIG_USB1_VBUS_PIN="PG12" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig index f1ceb8b5527..1117e147cc1 100644 --- a/configs/Yones_Toptech_BD1078_defconfig +++ b/configs/Yones_Toptech_BD1078_defconfig @@ -19,7 +19,9 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/Yones_Toptech_BS1078_V2_defconfig b/configs/Yones_Toptech_BS1078_V2_defconfig index 6701ecce2fe..ef30aee8281 100644 --- a/configs/Yones_Toptech_BS1078_V2_defconfig +++ b/configs/Yones_Toptech_BS1078_V2_defconfig @@ -16,5 +16,7 @@ CONFIG_VIDEO_LCD_BL_EN="PA25" CONFIG_VIDEO_LCD_BL_PWM="PH13" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y diff --git a/configs/a3y17lte_defconfig b/configs/a3y17lte_defconfig index 536e23e1df9..67eb7aff1fd 100644 --- a/configs/a3y17lte_defconfig +++ b/configs/a3y17lte_defconfig @@ -10,6 +10,8 @@ CONFIG_TARGET_A3Y17LTE=y CONFIG_NR_DRAM_BANKS=8 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte" CONFIG_SYS_LOAD_ADDR=0x40001000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200e50 CONFIG_FIT=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" @@ -17,6 +19,7 @@ CONFIG_SAVE_PREV_BL_FDT_ADDR=y CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_DM_I2C_GPIO=y diff --git a/configs/a5y17lte_defconfig b/configs/a5y17lte_defconfig index c6f452a8558..44915ea5341 100644 --- a/configs/a5y17lte_defconfig +++ b/configs/a5y17lte_defconfig @@ -10,6 +10,8 @@ CONFIG_TARGET_A5Y17LTE=y CONFIG_NR_DRAM_BANKS=12 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte" CONFIG_SYS_LOAD_ADDR=0x40001000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200e50 CONFIG_FIT=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" @@ -17,6 +19,7 @@ CONFIG_SAVE_PREV_BL_FDT_ADDR=y CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_DM_I2C_GPIO=y diff --git a/configs/a64-olinuxino-emmc_defconfig b/configs/a64-olinuxino-emmc_defconfig index 8ec9eb3e9c2..7d8e7649f2a 100644 --- a/configs/a64-olinuxino-emmc_defconfig +++ b/configs/a64-olinuxino-emmc_defconfig @@ -6,6 +6,8 @@ CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/a64-olinuxino_defconfig b/configs/a64-olinuxino_defconfig index 16cef18beef..06f51a8f8d3 100644 --- a/configs/a64-olinuxino_defconfig +++ b/configs/a64-olinuxino_defconfig @@ -6,6 +6,8 @@ CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/a7y17lte_defconfig b/configs/a7y17lte_defconfig index 28e9c097d19..58486f6a571 100644 --- a/configs/a7y17lte_defconfig +++ b/configs/a7y17lte_defconfig @@ -10,6 +10,8 @@ CONFIG_TARGET_A7Y17LTE=y CONFIG_NR_DRAM_BANKS=12 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte" CONFIG_SYS_LOAD_ADDR=0x40001000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200e50 CONFIG_FIT=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" @@ -17,6 +19,7 @@ CONFIG_SAVE_PREV_BL_FDT_ADDR=y CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_DM_I2C_GPIO=y diff --git a/configs/ae350_rv32_defconfig b/configs/ae350_rv32_defconfig index 8284feb773a..fcfc7b3fe23 100644 --- a/configs/ae350_rv32_defconfig +++ b/configs/ae350_rv32_defconfig @@ -7,11 +7,14 @@ CONFIG_DEFAULT_DEVICE_TREE="ae350_32" CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_TARGET_AX25_AE350=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe80 CONFIG_FIT=y CONFIG_SYS_MONITOR_BASE=0x88000000 CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="RISC-V # " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_IMLS=y CONFIG_CMD_MMC=y CONFIG_CMD_SF_TEST=y @@ -28,7 +31,9 @@ CONFIG_FTSDC010=y CONFIG_FTSDC010_SDIO=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_CFI_FLASH=y +CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/ae350_rv32_spl_defconfig b/configs/ae350_rv32_spl_defconfig index 8406eb5c333..cfd857c183f 100644 --- a/configs/ae350_rv32_spl_defconfig +++ b/configs/ae350_rv32_spl_defconfig @@ -10,13 +10,17 @@ CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_TARGET_AX25_AE350=y CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xffff00 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000 CONFIG_SYS_MONITOR_BASE=0x88000000 CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y -# CONFIG_BINMAN_FDT is not set +CONFIG_SPL_MAX_SIZE=0x100000 +CONFIG_SPL_BSS_START_ADDR=0x4000000 CONFIG_SYS_PROMPT="RISC-V # " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_IMLS=y CONFIG_CMD_MMC=y CONFIG_CMD_SF_TEST=y @@ -32,6 +36,8 @@ CONFIG_FTSDC010=y CONFIG_FTSDC010_SDIO=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SPI_FLASH_MACRONIX=y @@ -40,3 +46,4 @@ CONFIG_BAUDRATE=38400 CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_ATCSPI200_SPI=y +# CONFIG_BINMAN_FDT is not set diff --git a/configs/ae350_rv32_spl_xip_defconfig b/configs/ae350_rv32_spl_xip_defconfig index 5db1a7cbd70..36345fbfdc3 100644 --- a/configs/ae350_rv32_spl_xip_defconfig +++ b/configs/ae350_rv32_spl_xip_defconfig @@ -12,13 +12,17 @@ CONFIG_TARGET_AX25_AE350=y CONFIG_RISCV_SMODE=y CONFIG_XIP=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xffff00 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000 CONFIG_SYS_MONITOR_BASE=0x88000000 CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y -# CONFIG_BINMAN_FDT is not set +CONFIG_SPL_MAX_SIZE=0x100000 +CONFIG_SPL_BSS_START_ADDR=0x4000000 CONFIG_SYS_PROMPT="RISC-V # " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_IMLS=y CONFIG_CMD_MMC=y CONFIG_CMD_SF_TEST=y @@ -34,6 +38,8 @@ CONFIG_FTSDC010=y CONFIG_FTSDC010_SDIO=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SPI_FLASH_MACRONIX=y @@ -42,3 +48,4 @@ CONFIG_BAUDRATE=38400 CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_ATCSPI200_SPI=y +# CONFIG_BINMAN_FDT is not set diff --git a/configs/ae350_rv32_xip_defconfig b/configs/ae350_rv32_xip_defconfig index d76118630be..01883850f9a 100644 --- a/configs/ae350_rv32_xip_defconfig +++ b/configs/ae350_rv32_xip_defconfig @@ -8,11 +8,14 @@ CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_TARGET_AX25_AE350=y CONFIG_XIP=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe80 CONFIG_FIT=y CONFIG_SYS_MONITOR_BASE=0x88000000 CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="RISC-V # " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_IMLS=y CONFIG_CMD_MMC=y CONFIG_CMD_SF_TEST=y @@ -29,7 +32,9 @@ CONFIG_FTSDC010=y CONFIG_FTSDC010_SDIO=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_CFI_FLASH=y +CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/ae350_rv64_defconfig b/configs/ae350_rv64_defconfig index 860a45f7fbf..477329fa67a 100644 --- a/configs/ae350_rv64_defconfig +++ b/configs/ae350_rv64_defconfig @@ -8,11 +8,14 @@ CONFIG_SYS_LOAD_ADDR=0x100000 CONFIG_TARGET_AX25_AE350=y CONFIG_ARCH_RV64I=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffd70 CONFIG_FIT=y CONFIG_SYS_MONITOR_BASE=0x88000000 CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="RISC-V # " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_IMLS=y CONFIG_CMD_MMC=y CONFIG_CMD_SF_TEST=y @@ -29,7 +32,9 @@ CONFIG_FTSDC010=y CONFIG_FTSDC010_SDIO=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_CFI_FLASH=y +CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/ae350_rv64_spl_defconfig b/configs/ae350_rv64_spl_defconfig index 6abc9c1388d..eba12a8f0d4 100644 --- a/configs/ae350_rv64_spl_defconfig +++ b/configs/ae350_rv64_spl_defconfig @@ -11,13 +11,17 @@ CONFIG_TARGET_AX25_AE350=y CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe70 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000 CONFIG_SYS_MONITOR_BASE=0x88000000 CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y -# CONFIG_BINMAN_FDT is not set +CONFIG_SPL_MAX_SIZE=0x100000 +CONFIG_SPL_BSS_START_ADDR=0x4000000 CONFIG_SYS_PROMPT="RISC-V # " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_IMLS=y CONFIG_CMD_MMC=y CONFIG_CMD_SF_TEST=y @@ -33,6 +37,8 @@ CONFIG_FTSDC010=y CONFIG_FTSDC010_SDIO=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SPI_FLASH_MACRONIX=y @@ -41,3 +47,4 @@ CONFIG_BAUDRATE=38400 CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_ATCSPI200_SPI=y +# CONFIG_BINMAN_FDT is not set diff --git a/configs/ae350_rv64_spl_xip_defconfig b/configs/ae350_rv64_spl_xip_defconfig index f3ace4453f1..6ade12b740e 100644 --- a/configs/ae350_rv64_spl_xip_defconfig +++ b/configs/ae350_rv64_spl_xip_defconfig @@ -13,13 +13,17 @@ CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y CONFIG_XIP=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe70 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000 CONFIG_SYS_MONITOR_BASE=0x88000000 CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y -# CONFIG_BINMAN_FDT is not set +CONFIG_SPL_MAX_SIZE=0x100000 +CONFIG_SPL_BSS_START_ADDR=0x4000000 CONFIG_SYS_PROMPT="RISC-V # " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_IMLS=y CONFIG_CMD_MMC=y CONFIG_CMD_SF_TEST=y @@ -35,6 +39,8 @@ CONFIG_FTSDC010=y CONFIG_FTSDC010_SDIO=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SPI_FLASH_MACRONIX=y @@ -43,3 +49,4 @@ CONFIG_BAUDRATE=38400 CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_ATCSPI200_SPI=y +# CONFIG_BINMAN_FDT is not set diff --git a/configs/ae350_rv64_xip_defconfig b/configs/ae350_rv64_xip_defconfig index 3375cb69e64..2be91815a8e 100644 --- a/configs/ae350_rv64_xip_defconfig +++ b/configs/ae350_rv64_xip_defconfig @@ -9,11 +9,14 @@ CONFIG_TARGET_AX25_AE350=y CONFIG_ARCH_RV64I=y CONFIG_XIP=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffd70 CONFIG_FIT=y CONFIG_SYS_MONITOR_BASE=0x88000000 CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="RISC-V # " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_IMLS=y CONFIG_CMD_MMC=y CONFIG_CMD_SF_TEST=y @@ -30,7 +33,9 @@ CONFIG_FTSDC010=y CONFIG_FTSDC010_SDIO=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_CFI_FLASH=y +CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/alt_defconfig b/configs/alt_defconfig index 6ab4fe7a818..4e73e6af7d7 100644 --- a/configs/alt_defconfig +++ b/configs/alt_defconfig @@ -26,16 +26,24 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x50000000 CONFIG_ENV_ADDR=0xC0000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4f000000 CONFIG_FIT=y CONFIG_BOOTDELAY=3 +CONFIG_SPL_MAX_SIZE=0x4000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6340000 CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=256 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig index 5ad078ffaa9..0ec44091751 100644 --- a/configs/am335x_baltos_defconfig +++ b/configs/am335x_baltos_defconfig @@ -12,11 +12,15 @@ CONFIG_SPL=y CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run usbboot;run mmcboot;setenv mmcdev 1; setenv bootpart 1:2; run mmcboot;run nandboot;" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y CONFIG_SPL_MTD_SUPPORT=y @@ -26,6 +30,7 @@ CONFIG_SPL_NAND_BASE=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig index dc4693d40bf..b5ba2ccda5c 100644 --- a/configs/am335x_boneblack_vboot_defconfig +++ b/configs/am335x_boneblack_vboot_defconfig @@ -10,6 +10,8 @@ CONFIG_CLOCK_SYNTHESIZER=y CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x280000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_TIMESTAMP=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y @@ -20,6 +22,8 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_MUSB_NEW=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_NET=y @@ -27,8 +31,11 @@ CONFIG_SPL_NET_VCI_STRING="AM33xx U-Boot SPL" CONFIG_SPL_OS_BOOT=y CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_ETHER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_SPL=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 # CONFIG_CMD_FLASH is not set diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 30577a6fce4..c7dbd3c5702 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -10,6 +10,8 @@ CONFIG_AM335X_USB0_PERIPHERAL=y CONFIG_AM335X_USB1=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_TIMESTAMP=y CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set @@ -18,9 +20,12 @@ CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_boot CONFIG_LOGLEVEL=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_ETH=y # CONFIG_SPL_FS_EXT4 is not set +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_MUSB_NEW=y CONFIG_SPL_NAND_DRIVERS=y @@ -29,10 +34,14 @@ CONFIG_SPL_NAND_BASE=y CONFIG_SPL_NET=y CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL" CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x200000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_ETHER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x00080000 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig index f1b9d6c3ad8..00e80a89ded 100644 --- a/configs/am335x_evm_spiboot_defconfig +++ b/configs/am335x_evm_spiboot_defconfig @@ -12,6 +12,8 @@ CONFIG_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_TIMESTAMP=y CONFIG_SPL_LOAD_FIT=y CONFIG_OF_BOARD_SETUP=y @@ -19,13 +21,17 @@ CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_boot CONFIG_LOGLEVEL=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_FIT_IMAGE_TINY=y # CONFIG_SPL_FS_EXT4 is not set +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_MTD_SUPPORT=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_SPL=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 # CONFIG_CMD_FLASH is not set diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig index 7925e100bc2..0dc4bb25be2 100644 --- a/configs/am335x_guardian_defconfig +++ b/configs/am335x_guardian_defconfig @@ -21,6 +21,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x81000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030fef0 CONFIG_TIMESTAMP=y CONFIG_BOOTDELAY=0 CONFIG_AUTOBOOT_KEYED=y @@ -30,6 +32,8 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_ETH=y @@ -43,6 +47,7 @@ CONFIG_SPL_NET_VCI_STRING="Guardian U-Boot SPL" CONFIG_SPL_POWER=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_ETHER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig index c1ad2a59ec9..ef0a09877c1 100644 --- a/configs/am335x_hs_evm_defconfig +++ b/configs/am335x_hs_evm_defconfig @@ -9,6 +9,8 @@ CONFIG_AM33XX=y CONFIG_CLOCK_SYNTHESIZER=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_TIMESTAMP=y CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set @@ -17,15 +19,20 @@ CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_boot CONFIG_LOGLEVEL=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_MAX_SIZE=0xb0b0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_FIT_IMAGE_TINY=y # CONFIG_SPL_ENV_SUPPORT is not set # CONFIG_SPL_FS_EXT4 is not set +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_MTD_SUPPORT=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y # CONFIG_SPL_YMODEM_SUPPORT is not set +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y diff --git a/configs/am335x_hs_evm_uart_defconfig b/configs/am335x_hs_evm_uart_defconfig index 48e72f82276..d7ea5a31cd1 100644 --- a/configs/am335x_hs_evm_uart_defconfig +++ b/configs/am335x_hs_evm_uart_defconfig @@ -12,6 +12,8 @@ CONFIG_SPL=y # CONFIG_SPL_FS_FAT is not set # CONFIG_SPL_LIBDISK_SUPPORT is not set CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_TIMESTAMP=y CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set @@ -20,6 +22,9 @@ CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_boot CONFIG_LOGLEVEL=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_MAX_SIZE=0x9ab0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_FIT_IMAGE_TINY=y # CONFIG_SPL_ENV_SUPPORT is not set # CONFIG_SPL_FS_EXT4 is not set @@ -28,6 +33,7 @@ CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y diff --git a/configs/am335x_igep003x_defconfig b/configs/am335x_igep003x_defconfig index 04566142ef5..6da31d9e7f9 100644 --- a/configs/am335x_igep003x_defconfig +++ b/configs/am335x_igep003x_defconfig @@ -14,9 +14,13 @@ CONFIG_SPL=y CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt;run mmcboot;run nandboot;run netboot;" CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y CONFIG_SPL_MTD_SUPPORT=y @@ -36,11 +40,15 @@ CONFIG_SPL_UBI_LOAD_MONITOR_ID=0 CONFIG_SPL_UBI_LOAD_KERNEL_ID=3 CONFIG_SPL_UBI_LOAD_ARGS_ID=4 CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set diff --git a/configs/am335x_pdu001_defconfig b/configs/am335x_pdu001_defconfig index f6aa825ee43..9757057b85e 100644 --- a/configs/am335x_pdu001_defconfig +++ b/configs/am335x_pdu001_defconfig @@ -16,17 +16,22 @@ CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_LOCALVERSION="-EETS-1.0.0" CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_BOOTDELAY=1 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_BOOTCOMMAND="run eval_boot_device;part uuid mmc ${mmc_boot}:${root_fs_partition} root_fs_partuuid;setenv bootargs console=${console} vt.global_cursor_default=0 root=PARTUUID=${root_fs_partuuid} rootfstype=ext4 rootwait rootdelay=1;fatload mmc ${mmc_boot} ${fdtaddr} ${fdtfile};fatload mmc ${mmc_boot} ${loadaddr} ${bootfile};bootz ${loadaddr} - ${fdtaddr}" CONFIG_BOARD_LATE_INIT=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_POWER=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 # CONFIG_CMD_ELF is not set # CONFIG_CMD_XIMG is not set CONFIG_CMD_MEMINFO=y diff --git a/configs/am335x_shc_defconfig b/configs/am335x_shc_defconfig index 65cdc2acf56..77593e3e3dc 100644 --- a/configs/am335x_shc_defconfig +++ b/configs/am335x_shc_defconfig @@ -17,6 +17,8 @@ CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SERIES=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_TIMESTAMP=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_AUTOBOOT_KEYED=y @@ -30,17 +32,23 @@ CONFIG_BOOTCOMMAND="if mmc dev 1; mmc rescan; then run emmc_setup; else echo ERR CONFIG_DEFAULT_FDT_FILE="am335x-shc" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_OS_BOOT=y CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/am335x_shc_ict_defconfig b/configs/am335x_shc_ict_defconfig index a59ebf4a4ed..97a361ce4d6 100644 --- a/configs/am335x_shc_ict_defconfig +++ b/configs/am335x_shc_ict_defconfig @@ -18,6 +18,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SHC_ICT=y CONFIG_SERIES=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_TIMESTAMP=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_AUTOBOOT_KEYED=y @@ -28,17 +30,23 @@ CONFIG_BOOTCOMMAND="if mmc dev 0; mmc rescan; then run sd_setup; else echo ERROR CONFIG_DEFAULT_FDT_FILE="am335x-shc" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_OS_BOOT=y CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/am335x_shc_netboot_defconfig b/configs/am335x_shc_netboot_defconfig index 3c291cfe6d6..2c6fc5496eb 100644 --- a/configs/am335x_shc_netboot_defconfig +++ b/configs/am335x_shc_netboot_defconfig @@ -18,6 +18,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SHC_NETBOOT=y CONFIG_SERIES=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_TIMESTAMP=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_AUTOBOOT_KEYED=y @@ -31,6 +33,8 @@ CONFIG_BOOTCOMMAND="run fusecmd; if run netboot; then echo Booting from network; CONFIG_DEFAULT_FDT_FILE="am335x-shc" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y @@ -38,11 +42,15 @@ CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/am335x_shc_sdboot_defconfig b/configs/am335x_shc_sdboot_defconfig index 8c4f14d764e..a154a342551 100644 --- a/configs/am335x_shc_sdboot_defconfig +++ b/configs/am335x_shc_sdboot_defconfig @@ -18,6 +18,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_TIMESTAMP=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_AUTOBOOT_KEYED=y @@ -31,17 +33,23 @@ CONFIG_BOOTCOMMAND="if mmc dev 0; mmc rescan; then run sd_setup; else echo ERROR CONFIG_DEFAULT_FDT_FILE="am335x-shc" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_OS_BOOT=y CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/am335x_sl50_defconfig b/configs/am335x_sl50_defconfig index 41017de2f9c..1338190e9ff 100644 --- a/configs/am335x_sl50_defconfig +++ b/configs/am335x_sl50_defconfig @@ -15,12 +15,16 @@ CONFIG_ENV_OFFSET_REDUND=0x20000 CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_TIMESTAMP=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y @@ -34,9 +38,12 @@ CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL" CONFIG_SPL_OS_BOOT=y CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 904fc5302be..19e01dc41ae 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -14,9 +14,14 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x2500 CONFIG_SPL=y CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00 CONFIG_BOOTDELAY=10 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device $mmcdev; if run loadbootenv; then run importbootenv; fi; echo Checking if uenvcmd is set ...; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; echo Running default loadimage ...; setenv bootfile zImage; if run loadimage; then run loadfdt; run mmcboot; fi; else run nandboot; fi" +CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set @@ -26,10 +31,16 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x2a0000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 # CONFIG_SPL_POWER is not set CONFIG_SYS_PROMPT="AM3517_EVM # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1054 # CONFIG_CMD_IMI is not set CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0xaa0000 diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index 7a736b6fe1a..35b1cdb4016 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -10,12 +10,18 @@ CONFIG_AM43XX=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00 CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x439e0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_ETH=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -23,11 +29,15 @@ CONFIG_SPL_NAND_BASE=y CONFIG_SPL_NET=y CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL" CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x300000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_ETHER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x00100000 CONFIG_CMD_SPL_WRITE_SIZE=0x40000 diff --git a/configs/am43xx_evm_qspiboot_defconfig b/configs/am43xx_evm_qspiboot_defconfig index 2a36dc580e9..80ad268fe19 100644 --- a/configs/am43xx_evm_qspiboot_defconfig +++ b/configs/am43xx_evm_qspiboot_defconfig @@ -12,11 +12,14 @@ CONFIG_DEFAULT_DEVICE_TREE="am437x-sk-evm" CONFIG_AM43XX=y CONFIG_ENV_OFFSET_REDUND=0x120000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00 CONFIG_QSPI_BOOT=y CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/am43xx_evm_rtconly_defconfig b/configs/am43xx_evm_rtconly_defconfig index 30e44cb65e3..ff5fbc6676a 100644 --- a/configs/am43xx_evm_rtconly_defconfig +++ b/configs/am43xx_evm_rtconly_defconfig @@ -10,18 +10,28 @@ CONFIG_AM43XX=y CONFIG_SPL_RTC_DDR_SUPPORT=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00 CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x439e0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x300000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x00100000 CONFIG_CMD_SPL_WRITE_SIZE=0x40000 diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig index e844106243d..0a4b9a99cee 100644 --- a/configs/am43xx_evm_usbhost_boot_defconfig +++ b/configs/am43xx_evm_usbhost_boot_defconfig @@ -9,21 +9,31 @@ CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" CONFIG_AM43XX=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00 CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x37690 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x300000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_STORAGE=y CONFIG_SPL_USB_GADGET=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x00100000 CONFIG_CMD_SPL_WRITE_SIZE=0x40000 diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig index 1517b707048..c401d5619a9 100644 --- a/configs/am43xx_hs_evm_defconfig +++ b/configs/am43xx_hs_evm_defconfig @@ -16,13 +16,19 @@ CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000 CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00 CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x36100 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_ETH=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -33,6 +39,7 @@ CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_STORAGE=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_ETHER=y +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig index 4223f00156c..d82c66572cc 100644 --- a/configs/am57xx_evm_defconfig +++ b/configs/am57xx_evm_defconfig @@ -15,6 +15,8 @@ CONFIG_SPL_SPI=y CONFIG_ARMV7_LPAE=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4037ff00 CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_BOARD_SETUP=y @@ -26,16 +28,23 @@ CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set CONFIG_AVB_VERIFY=y CONFIG_ANDROID_AB=y +CONFIG_SPL_MAX_SIZE=0x7bc00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_DMA=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ADTIMG=y CONFIG_CMD_ABOOTIMG=y CONFIG_CMD_SPL=y diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig index 529636d3354..33209177301 100644 --- a/configs/am57xx_hs_evm_defconfig +++ b/configs/am57xx_hs_evm_defconfig @@ -18,6 +18,8 @@ CONFIG_SPL_SPI=y CONFIG_ARMV7_LPAE=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4037ff00 CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_BOARD_SETUP=y @@ -29,12 +31,17 @@ CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set CONFIG_AVB_VERIFY=y CONFIG_ANDROID_AB=y +CONFIG_SPL_MAX_SIZE=0x7a8b0 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_DMA=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ADTIMG=y CONFIG_CMD_ABOOTIMG=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig index 3149bd1719f..014a3830df7 100644 --- a/configs/am57xx_hs_evm_usb_defconfig +++ b/configs/am57xx_hs_evm_usb_defconfig @@ -20,6 +20,8 @@ CONFIG_SPL_SPI=y CONFIG_ARMV7_LPAE=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4037ff00 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000 # CONFIG_USE_SPL_FIT_GENERATOR is not set @@ -32,8 +34,12 @@ CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set CONFIG_AVB_VERIFY=y CONFIG_ANDROID_AB=y +CONFIG_SPL_MAX_SIZE=0x74eb0 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_DMA=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_RAM_SUPPORT=y @@ -42,6 +48,7 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ADTIMG=y CONFIG_CMD_ABOOTIMG=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/am64x_evm_a53_defconfig b/configs/am64x_evm_a53_defconfig index be702285d5d..49bfc006ddb 100644 --- a/configs/am64x_evm_a53_defconfig +++ b/configs/am64x_evm_a53_defconfig @@ -25,19 +25,28 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run run_kern" CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x180000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80a00000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_ETH=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_DM_SPI_FLASH=y @@ -53,6 +62,7 @@ CONFIG_SPL_USB_STORAGE=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y CONFIG_CMD_DM=y diff --git a/configs/am64x_evm_r5_defconfig b/configs/am64x_evm_r5_defconfig index 158c43e2bce..7226af760e3 100644 --- a/configs/am64x_evm_r5_defconfig +++ b/configs/am64x_evm_r5_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7019b800 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000 CONFIG_USE_BOOTCOMMAND=y @@ -31,11 +33,19 @@ CONFIG_BOOTCOMMAND="run distro_bootcmd" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y +CONFIG_SPL_MAX_SIZE=0x180000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x7019b800 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 @@ -60,6 +70,7 @@ CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y CONFIG_CMD_GPT=y diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig index 9f41b397c34..9c088e1d02e 100644 --- a/configs/am65x_evm_a53_defconfig +++ b/configs/am65x_evm_a53_defconfig @@ -25,6 +25,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_PSCI_RESET is not set CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 @@ -33,12 +35,19 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" CONFIG_LOGLEVEL=7 CONFIG_CONSOLE_MUX=y +CONFIG_SPL_MAX_SIZE=0x58000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80a00000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_MTD_SUPPORT=y @@ -55,6 +64,7 @@ CONFIG_SPL_USB_STORAGE=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y CONFIG_CMD_GPT=y diff --git a/configs/am65x_evm_r5_defconfig b/configs/am65x_evm_r5_defconfig index a8f9a85deae..2d8add2fbd5 100644 --- a/configs/am65x_evm_r5_defconfig +++ b/configs/am65x_evm_r5_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41c7effc # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set @@ -31,9 +33,17 @@ CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y +CONFIG_SPL_MAX_SIZE=0x58000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x41c7effc +CONFIG_SPL_BSS_MAX_SIZE=0xc00 CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 @@ -52,6 +62,7 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GPT=y diff --git a/configs/am65x_evm_r5_usbdfu_defconfig b/configs/am65x_evm_r5_usbdfu_defconfig index 57cd0f35a56..dbda4f74554 100644 --- a/configs/am65x_evm_r5_usbdfu_defconfig +++ b/configs/am65x_evm_r5_usbdfu_defconfig @@ -18,13 +18,23 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41c7effc # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000 CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_MAX_SIZE=0x58000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x41c7effc +CONFIG_SPL_BSS_MAX_SIZE=0xc00 CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y @@ -39,6 +49,7 @@ CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y diff --git a/configs/am65x_evm_r5_usbmsc_defconfig b/configs/am65x_evm_r5_usbmsc_defconfig index e6147d1be36..64b7d49310d 100644 --- a/configs/am65x_evm_r5_usbmsc_defconfig +++ b/configs/am65x_evm_r5_usbmsc_defconfig @@ -18,12 +18,22 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41c7effc # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_MAX_SIZE=0x58000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x41c7effc +CONFIG_SPL_BSS_MAX_SIZE=0xc00 CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y @@ -39,6 +49,7 @@ CONFIG_SPL_USB_STORAGE=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GPT=y diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig index 05063d30c84..3ce290467ab 100644 --- a/configs/am65x_hs_evm_a53_defconfig +++ b/configs/am65x_hs_evm_a53_defconfig @@ -26,6 +26,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_PSCI_RESET is not set CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set @@ -33,11 +35,18 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_fit_${boot}; run get_overlaystring; run run_fit" CONFIG_LOGLEVEL=7 CONFIG_CONSOLE_MUX=y +CONFIG_SPL_MAX_SIZE=0x58000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80a00000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_MTD_SUPPORT=y @@ -49,6 +58,7 @@ CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y CONFIG_CMD_GPT=y diff --git a/configs/am65x_hs_evm_r5_defconfig b/configs/am65x_hs_evm_r5_defconfig index e52941e3966..fc0c5432dbc 100644 --- a/configs/am65x_hs_evm_r5_defconfig +++ b/configs/am65x_hs_evm_r5_defconfig @@ -23,13 +23,23 @@ CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41c7effc # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_MAX_SIZE=0x58000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x41c7effc +CONFIG_SPL_BSS_MAX_SIZE=0xc00 CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 @@ -48,6 +58,7 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GPT=y diff --git a/configs/amarula_a64_relic_defconfig b/configs/amarula_a64_relic_defconfig index ae44b66d109..0e173c28c12 100644 --- a/configs/amarula_a64_relic_defconfig +++ b/configs/amarula_a64_relic_defconfig @@ -7,6 +7,8 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_VIDEO_DE2 is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/amcore_defconfig b/configs/amcore_defconfig index 00620d4579f..ad549c02c15 100644 --- a/configs/amcore_defconfig +++ b/configs/amcore_defconfig @@ -15,9 +15,11 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="bootm ffc20000" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_SYS_LONGHELP is not set CONFIG_SYS_PROMPT="amcore $ " +CONFIG_SYS_PBSIZE=282 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_IMLS=y # CONFIG_CMD_XIMG is not set diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig index 13120f370e2..b78437e9232 100644 --- a/configs/ap121_defconfig +++ b/configs/ap121_defconfig @@ -13,6 +13,8 @@ CONFIG_ARCH_ATH79=y CONFIG_DEBUG_UART=y CONFIG_SYS_MEMTEST_START=0x80100000 CONFIG_SYS_MEMTEST_END=0x83f00000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xbd007fff CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" @@ -20,7 +22,10 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe;mtdparts default;bootm 0x9f650000" CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_SYS_PROMPT="ap121 # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_ELF is not set diff --git a/configs/ap143_defconfig b/configs/ap143_defconfig index 2f1a9f3cc12..f16724e4c05 100644 --- a/configs/ap143_defconfig +++ b/configs/ap143_defconfig @@ -15,6 +15,8 @@ CONFIG_TARGET_AP143=y CONFIG_DEBUG_UART=y CONFIG_SYS_MEMTEST_START=0x80100000 CONFIG_SYS_MEMTEST_END=0x83f00000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xbd001fff CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" @@ -22,7 +24,10 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe;mtdparts default;bootm 0x9f680000" CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_SYS_PROMPT="ap143 # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_ELF is not set diff --git a/configs/ap152_defconfig b/configs/ap152_defconfig index ded583f398d..2036cde385e 100644 --- a/configs/ap152_defconfig +++ b/configs/ap152_defconfig @@ -15,6 +15,8 @@ CONFIG_TARGET_AP152=y CONFIG_DEBUG_UART=y CONFIG_SYS_MEMTEST_START=0x80100000 CONFIG_SYS_MEMTEST_END=0x83f00000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xbd001fff CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" @@ -22,7 +24,10 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe;mtdparts default;bootm 0x9f060000" CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_SYS_PROMPT="ap152 # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_ELF is not set diff --git a/configs/apalis-imx8_defconfig b/configs/apalis-imx8_defconfig index beb20f6e1c0..b1e6dda8546 100644 --- a/configs/apalis-imx8_defconfig +++ b/configs/apalis-imx8_defconfig @@ -13,6 +13,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_SYS_MEMTEST_START=0x88000000 CONFIG_SYS_MEMTEST_END=0x89000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -21,6 +23,9 @@ CONFIG_LOG=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_CPU=y # CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_ASKENV=y diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig index e098b1171ee..2d9c0ae18e3 100644 --- a/configs/apalis-tk1_defconfig +++ b/configs/apalis-tk1_defconfig @@ -21,7 +21,18 @@ CONFIG_SYS_STDIO_DEREGISTER=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x800ffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Apalis TK1 # " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1054 # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index ea4ad276e7f..89e9971ea3c 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -36,12 +36,16 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_SYS_PROMPT="Apalis iMX6 # " +CONFIG_SYS_MAXARGS=48 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1055 # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig index 86d48eb6d92..2a8d3c6e0a3 100644 --- a/configs/apalis_t30_defconfig +++ b/configs/apalis_t30_defconfig @@ -17,7 +17,18 @@ CONFIG_SYS_STDIO_DEREGISTER=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x800ffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Apalis T30 # " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1054 # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig index 886fc4a6feb..c4fd8034565 100644 --- a/configs/apple_m1_defconfig +++ b/configs/apple_m1_defconfig @@ -6,6 +6,8 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_NET is not set CONFIG_APPLE_SPI_KEYB=y # CONFIG_MMC is not set diff --git a/configs/aristainetos2c_defconfig b/configs/aristainetos2c_defconfig index b3bc406aa6c..7a3e690ed66 100644 --- a/configs/aristainetos2c_defconfig +++ b/configs/aristainetos2c_defconfig @@ -23,6 +23,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_TYPES=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set diff --git a/configs/aristainetos2ccslb_defconfig b/configs/aristainetos2ccslb_defconfig index 30177fa46b1..6bc78b77329 100644 --- a/configs/aristainetos2ccslb_defconfig +++ b/configs/aristainetos2ccslb_defconfig @@ -23,6 +23,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_TYPES=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set diff --git a/configs/armadillo-800eva_defconfig b/configs/armadillo-800eva_defconfig index 4d3b3a3c51e..6a67c60dd42 100644 --- a/configs/armadillo-800eva_defconfig +++ b/configs/armadillo-800eva_defconfig @@ -15,10 +15,14 @@ CONFIG_TARGET_ARMADILLO_800EVA=y CONFIG_SYS_CLK_FREQ=50000000 CONFIG_SYS_LOAD_ADDR=0x44000000 CONFIG_ENV_ADDR=0x40000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xe8083000 CONFIG_SYS_MONITOR_BASE=0x00000000 CONFIG_BOOTDELAY=3 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=256 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig index c7fc2454b32..5beba587766 100644 --- a/configs/arndale_defconfig +++ b/configs/arndale_defconfig @@ -17,13 +17,18 @@ CONFIG_SPL=y CONFIG_IDENT_STRING=" for ARNDALE" CONFIG_SYS_LOAD_ADDR=0x43e00000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2050000 CONFIG_FIT=y CONFIG_FIT_BEST_MATCH=y CONFIG_USE_PREBOOT=y CONFIG_SILENT_CONSOLE=y CONFIG_CONSOLE_MUX=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3800 CONFIG_SYS_PROMPT="ARNDALE # " +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/astro_mcf5373l_defconfig b/configs/astro_mcf5373l_defconfig index 1eea56b5ef2..3a44c7e8ec9 100644 --- a/configs/astro_mcf5373l_defconfig +++ b/configs/astro_mcf5373l_defconfig @@ -16,9 +16,11 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="protect off 0x80000 0x1ffffff;run env_check;run xilinxload&&run alteraload&&bootm 0x80000;update;reset" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="URMEL > " +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_IMLS=y CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_I2C=y diff --git a/configs/at91sam9260ek_dataflash_cs0_defconfig b/configs/at91sam9260ek_dataflash_cs0_defconfig index a2e1272c358..5d49332a35b 100644 --- a/configs/at91sam9260ek_dataflash_cs0_defconfig +++ b/configs/at91sam9260ek_dataflash_cs0_defconfig @@ -25,6 +25,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9260ek_dataflash_cs1_defconfig b/configs/at91sam9260ek_dataflash_cs1_defconfig index 204f7e3173c..0ad24a2d5dd 100644 --- a/configs/at91sam9260ek_dataflash_cs1_defconfig +++ b/configs/at91sam9260ek_dataflash_cs1_defconfig @@ -25,6 +25,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe 0:1; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9260ek_nandflash_defconfig b/configs/at91sam9260ek_nandflash_defconfig index 547f11ce6a0..926708d2168 100644 --- a/configs/at91sam9260ek_nandflash_defconfig +++ b/configs/at91sam9260ek_nandflash_defconfig @@ -24,6 +24,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9261ek_dataflash_cs0_defconfig b/configs/at91sam9261ek_dataflash_cs0_defconfig index dc6b40c04e9..56f57024df4 100644 --- a/configs/at91sam9261ek_dataflash_cs0_defconfig +++ b/configs/at91sam9261ek_dataflash_cs0_defconfig @@ -26,6 +26,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/at91sam9261ek_dataflash_cs3_defconfig b/configs/at91sam9261ek_dataflash_cs3_defconfig index 5d7a7f17093..18734958952 100644 --- a/configs/at91sam9261ek_dataflash_cs3_defconfig +++ b/configs/at91sam9261ek_dataflash_cs3_defconfig @@ -26,6 +26,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/at91sam9261ek_nandflash_defconfig b/configs/at91sam9261ek_nandflash_defconfig index ee250d7e4ae..7f6fc42df4d 100644 --- a/configs/at91sam9261ek_nandflash_defconfig +++ b/configs/at91sam9261ek_nandflash_defconfig @@ -25,6 +25,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/at91sam9263ek_dataflash_cs0_defconfig b/configs/at91sam9263ek_dataflash_cs0_defconfig index d0d5b1a572f..55686f7128f 100644 --- a/configs/at91sam9263ek_dataflash_cs0_defconfig +++ b/configs/at91sam9263ek_dataflash_cs0_defconfig @@ -27,6 +27,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9263ek_dataflash_defconfig b/configs/at91sam9263ek_dataflash_defconfig index d0d5b1a572f..55686f7128f 100644 --- a/configs/at91sam9263ek_dataflash_defconfig +++ b/configs/at91sam9263ek_dataflash_defconfig @@ -27,6 +27,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig index 1807e3cb97a..8c31f70073f 100644 --- a/configs/at91sam9263ek_nandflash_defconfig +++ b/configs/at91sam9263ek_nandflash_defconfig @@ -26,6 +26,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9263ek_norflash_boot_defconfig b/configs/at91sam9263ek_norflash_boot_defconfig index 585e10b891b..60380e25ab8 100644 --- a/configs/at91sam9263ek_norflash_boot_defconfig +++ b/configs/at91sam9263ek_norflash_boot_defconfig @@ -24,6 +24,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9263ek_norflash_defconfig b/configs/at91sam9263ek_norflash_defconfig index 19b3d9da88a..439c4e11c96 100644 --- a/configs/at91sam9263ek_norflash_defconfig +++ b/configs/at91sam9263ek_norflash_defconfig @@ -25,6 +25,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9g10ek_dataflash_cs0_defconfig b/configs/at91sam9g10ek_dataflash_cs0_defconfig index 18433376c71..252a34f7ce8 100644 --- a/configs/at91sam9g10ek_dataflash_cs0_defconfig +++ b/configs/at91sam9g10ek_dataflash_cs0_defconfig @@ -26,6 +26,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/at91sam9g10ek_dataflash_cs3_defconfig b/configs/at91sam9g10ek_dataflash_cs3_defconfig index edf84fd0b51..b1450af8932 100644 --- a/configs/at91sam9g10ek_dataflash_cs3_defconfig +++ b/configs/at91sam9g10ek_dataflash_cs3_defconfig @@ -26,6 +26,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/at91sam9g10ek_nandflash_defconfig b/configs/at91sam9g10ek_nandflash_defconfig index 390516c7684..38be58fa89e 100644 --- a/configs/at91sam9g10ek_nandflash_defconfig +++ b/configs/at91sam9g10ek_nandflash_defconfig @@ -25,6 +25,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/at91sam9g20ek_2mmc_defconfig b/configs/at91sam9g20ek_2mmc_defconfig index 34b0b830e54..90bd1517297 100644 --- a/configs/at91sam9g20ek_2mmc_defconfig +++ b/configs/at91sam9g20ek_2mmc_defconfig @@ -26,6 +26,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x22000000 uImage; bootm" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9g20ek_2mmc_nandflash_defconfig b/configs/at91sam9g20ek_2mmc_nandflash_defconfig index 0eb118e93f4..51586d801ce 100644 --- a/configs/at91sam9g20ek_2mmc_nandflash_defconfig +++ b/configs/at91sam9g20ek_2mmc_nandflash_defconfig @@ -25,6 +25,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9g20ek_dataflash_cs0_defconfig b/configs/at91sam9g20ek_dataflash_cs0_defconfig index 596c9bf6ed4..f0813e0ae93 100644 --- a/configs/at91sam9g20ek_dataflash_cs0_defconfig +++ b/configs/at91sam9g20ek_dataflash_cs0_defconfig @@ -25,6 +25,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9g20ek_dataflash_cs1_defconfig b/configs/at91sam9g20ek_dataflash_cs1_defconfig index 281894d91fa..96975a3e126 100644 --- a/configs/at91sam9g20ek_dataflash_cs1_defconfig +++ b/configs/at91sam9g20ek_dataflash_cs1_defconfig @@ -25,6 +25,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe 0:1; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9g20ek_nandflash_defconfig b/configs/at91sam9g20ek_nandflash_defconfig index d7a57db08b8..af7fe326aba 100644 --- a/configs/at91sam9g20ek_nandflash_defconfig +++ b/configs/at91sam9g20ek_nandflash_defconfig @@ -24,6 +24,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9m10g45ek_mmc_defconfig b/configs/at91sam9m10g45ek_mmc_defconfig index 03e6d3a9bd5..3c17b64797d 100644 --- a/configs/at91sam9m10g45ek_mmc_defconfig +++ b/configs/at91sam9m10g45ek_mmc_defconfig @@ -14,6 +14,8 @@ CONFIG_DEBUG_UART_BASE=0xffffee00 CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70003f00 CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -23,8 +25,11 @@ CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x71000000 dtb; fatload mmc 0:1 0x72000000 z CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x10000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9m10g45ek_nandflash_defconfig b/configs/at91sam9m10g45ek_nandflash_defconfig index f1c8574685a..ecce82447a1 100644 --- a/configs/at91sam9m10g45ek_nandflash_defconfig +++ b/configs/at91sam9m10g45ek_nandflash_defconfig @@ -14,6 +14,8 @@ CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70003f00 CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -23,8 +25,11 @@ CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x10000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig index 9cb1ea28f3d..21cbfbd1f42 100644 --- a/configs/at91sam9n12ek_mmc_defconfig +++ b/configs/at91sam9n12ek_mmc_defconfig @@ -12,14 +12,19 @@ CONFIG_DEBUG_UART_BASE=0xfffff200 CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x303f00 CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};fatload mmc 0:1 0x21000000 dtb;fatload mmc 0:1 0x22000000 uImage;bootm 0x22000000 - 0x21000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x6000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig index d73d80b5af8..beb24e23622 100644 --- a/configs/at91sam9n12ek_nandflash_defconfig +++ b/configs/at91sam9n12ek_nandflash_defconfig @@ -12,14 +12,19 @@ CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x303f00 CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_nand};nand read 0x21000000 0x180000 0x080000;nand read 0x22000000 0x200000 0x400000;bootm 0x22000000 - 0x21000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x6000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig index 9c984a941fe..3ac22ffb62a 100644 --- a/configs/at91sam9n12ek_spiflash_defconfig +++ b/configs/at91sam9n12ek_spiflash_defconfig @@ -14,14 +14,19 @@ CONFIG_DEBUG_UART_BASE=0xfffff200 CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x303f00 CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_nand};sf probe 0; sf read 0x22000000 0x100000 0x300000; bootm 0x22000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x6000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y diff --git a/configs/at91sam9rlek_dataflash_defconfig b/configs/at91sam9rlek_dataflash_defconfig index fad75acbebe..a06e2625b9d 100644 --- a/configs/at91sam9rlek_dataflash_defconfig +++ b/configs/at91sam9rlek_dataflash_defconfig @@ -26,6 +26,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9rlek_mmc_defconfig b/configs/at91sam9rlek_mmc_defconfig index fb683a722ce..ef74c6b349e 100644 --- a/configs/at91sam9rlek_mmc_defconfig +++ b/configs/at91sam9rlek_mmc_defconfig @@ -25,6 +25,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9rlek_nandflash_defconfig b/configs/at91sam9rlek_nandflash_defconfig index e42a999dcc2..d8f490f16bf 100644 --- a/configs/at91sam9rlek_nandflash_defconfig +++ b/configs/at91sam9rlek_nandflash_defconfig @@ -25,6 +25,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig index 2fe34776b66..d31ece77feb 100644 --- a/configs/at91sam9x5ek_dataflash_defconfig +++ b/configs/at91sam9x5ek_dataflash_defconfig @@ -16,6 +16,8 @@ CONFIG_DEBUG_UART_BASE=0xfffff200 CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0 CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -25,8 +27,11 @@ CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x220 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x6000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig index 6bca1c6d38e..cfd2dcd4564 100644 --- a/configs/at91sam9x5ek_mmc_defconfig +++ b/configs/at91sam9x5ek_mmc_defconfig @@ -14,6 +14,8 @@ CONFIG_DEBUG_UART_BASE=0xfffff200 CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -22,8 +24,11 @@ CONFIG_BOOTARGS="mem=128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/ # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x6000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig index 327fa336a85..508896b311d 100644 --- a/configs/at91sam9x5ek_nandflash_defconfig +++ b/configs/at91sam9x5ek_nandflash_defconfig @@ -14,6 +14,8 @@ CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0 CONFIG_FIT=y CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 @@ -24,8 +26,11 @@ CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x600000; nand read 0x21000000 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x6000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y diff --git a/configs/at91sam9x5ek_spiflash_defconfig b/configs/at91sam9x5ek_spiflash_defconfig index 50b3fc9b515..387dc0ff0c6 100644 --- a/configs/at91sam9x5ek_spiflash_defconfig +++ b/configs/at91sam9x5ek_spiflash_defconfig @@ -16,6 +16,8 @@ CONFIG_DEBUG_UART_BASE=0xfffff200 CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0 CONFIG_FIT=y CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 @@ -26,8 +28,11 @@ CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x100000 0x300000; bootm 0x22 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x6000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y diff --git a/configs/at91sam9xeek_dataflash_cs0_defconfig b/configs/at91sam9xeek_dataflash_cs0_defconfig index a2e1272c358..5d49332a35b 100644 --- a/configs/at91sam9xeek_dataflash_cs0_defconfig +++ b/configs/at91sam9xeek_dataflash_cs0_defconfig @@ -25,6 +25,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9xeek_dataflash_cs1_defconfig b/configs/at91sam9xeek_dataflash_cs1_defconfig index 204f7e3173c..0ad24a2d5dd 100644 --- a/configs/at91sam9xeek_dataflash_cs1_defconfig +++ b/configs/at91sam9xeek_dataflash_cs1_defconfig @@ -25,6 +25,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe 0:1; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/at91sam9xeek_nandflash_defconfig b/configs/at91sam9xeek_nandflash_defconfig index 547f11ce6a0..926708d2168 100644 --- a/configs/at91sam9xeek_nandflash_defconfig +++ b/configs/at91sam9xeek_nandflash_defconfig @@ -24,6 +24,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig index f27d92ab785..450b2830e56 100644 --- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig +++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig @@ -18,6 +18,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_MEMTEST_START=0x00000000 CONFIG_SYS_MEMTEST_END=0x00001000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8000000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -26,7 +28,22 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000 CONFIG_BOOTDELAY=0 # CONFIG_DISPLAY_CPUINFO is not set CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x0 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub" +CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin" CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x8000000 +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2073 CONFIG_CMD_MEMTEST=y CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADP=y diff --git a/configs/axm_defconfig b/configs/axm_defconfig index 89b9f9faea7..b61151129fc 100644 --- a/configs/axm_defconfig +++ b/configs/axm_defconfig @@ -35,16 +35,31 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run flash_self" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x3e00 +CONFIG_SPL_PAD_TO=0x20000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x3e00 +CONFIG_SPL_BSS_MAX_SIZE=0x600 # CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x304000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20ba0000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x460000 CONFIG_SPL_CRC32=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y +CONFIG_SPL_NAND_SOFTECC=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/axs101_defconfig b/configs/axs101_defconfig index 0f3e06263d3..efad458720b 100644 --- a/configs/axs101_defconfig +++ b/configs/axs101_defconfig @@ -10,6 +10,8 @@ CONFIG_DEBUG_UART_CLOCK=33333333 CONFIG_SYS_CLK_FREQ=750000000 CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS3,115200n8" @@ -17,6 +19,8 @@ CONFIG_BOARD_TYPES=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="AXS# " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=278 # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig index d86fb9c8d3c..64407655767 100644 --- a/configs/axs103_defconfig +++ b/configs/axs103_defconfig @@ -10,6 +10,8 @@ CONFIG_DEBUG_UART_CLOCK=33333333 CONFIG_SYS_CLK_FREQ=100000000 CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS3,115200n8" @@ -17,6 +19,8 @@ CONFIG_BOARD_TYPES=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="AXS# " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=278 # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index b89dd8ea62b..66c444fc750 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -9,7 +9,9 @@ CONFIG_USB0_VBUS_PIN="PB9" CONFIG_USB2_VBUS_PIN="PH12" CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/bananapi-m5_defconfig b/configs/bananapi-m5_defconfig index 798564e1730..b54272c2b38 100644 --- a/configs/bananapi-m5_defconfig +++ b/configs/bananapi-m5_defconfig @@ -11,10 +11,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING="bpi-m5" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/bananapi_m1_plus_defconfig b/configs/bananapi_m1_plus_defconfig index 2f0c22f62fa..955a60ddc34 100644 --- a/configs/bananapi_m1_plus_defconfig +++ b/configs/bananapi_m1_plus_defconfig @@ -9,7 +9,9 @@ CONFIG_VIDEO_COMPOSITE=y CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_NETCONSOLE=y CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig index a35fcdb64e8..08f7683233c 100644 --- a/configs/bananapi_m2_berry_defconfig +++ b/configs/bananapi_m2_berry_defconfig @@ -9,7 +9,9 @@ CONFIG_USB1_VBUS_PIN="PH23" # CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SCSI_AHCI=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/bananapi_m2_plus_h3_defconfig b/configs/bananapi_m2_plus_h3_defconfig index 26ced59fb02..d0981f6481a 100644 --- a/configs/bananapi_m2_plus_h3_defconfig +++ b/configs/bananapi_m2_plus_h3_defconfig @@ -7,6 +7,8 @@ CONFIG_DRAM_CLK=672 CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/bananapi_m2_plus_h5_defconfig b/configs/bananapi_m2_plus_h5_defconfig index fb6c945919a..0fb1bda1c6e 100644 --- a/configs/bananapi_m2_plus_h5_defconfig +++ b/configs/bananapi_m2_plus_h5_defconfig @@ -7,6 +7,8 @@ CONFIG_DRAM_CLK=672 CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/bananapi_m2_zero_defconfig b/configs/bananapi_m2_zero_defconfig index ac3f8f5ab8b..6a3594c0938 100644 --- a/configs/bananapi_m2_zero_defconfig +++ b/configs/bananapi_m2_zero_defconfig @@ -6,3 +6,5 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=408 CONFIG_MMC0_CD_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig index 5463b046fdb..5d1d10a0918 100644 --- a/configs/bananapi_m64_defconfig +++ b/configs/bananapi_m64_defconfig @@ -7,6 +7,8 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/bayleybay_defconfig b/configs/bayleybay_defconfig index 667240bff1c..80602fbbff9 100644 --- a/configs/bayleybay_defconfig +++ b/configs/bayleybay_defconfig @@ -26,6 +26,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/bcm7260_defconfig b/configs/bcm7260_defconfig index 401a2d7414c..28042202109 100644 --- a/configs/bcm7260_defconfig +++ b/configs/bcm7260_defconfig @@ -19,6 +19,9 @@ CONFIG_PREBOOT="fdt addr ${fdtcontroladdr};fdt move ${fdtcontroladdr} ${fdtsavea CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot>" +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=536 CONFIG_CMD_ASKENV=y CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set diff --git a/configs/bcm7445_defconfig b/configs/bcm7445_defconfig index b30d4bba024..0382034a479 100644 --- a/configs/bcm7445_defconfig +++ b/configs/bcm7445_defconfig @@ -20,6 +20,9 @@ CONFIG_PREBOOT="fdt addr ${fdtcontroladdr};fdt move ${fdtcontroladdr} ${fdtsavea CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot>" +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=536 CONFIG_CMD_ASKENV=y CONFIG_CMD_MMC=y CONFIG_CMD_SF_TEST=y diff --git a/configs/bcm963158_ram_defconfig b/configs/bcm963158_ram_defconfig index 642faf511f5..3bc4ca3ef6e 100644 --- a/configs/bcm963158_ram_defconfig +++ b/configs/bcm963158_ram_defconfig @@ -12,6 +12,8 @@ CONFIG_DEFAULT_DEVICE_TREE="bcm963158" CONFIG_SYS_LOAD_ADDR=0x10000000 CONFIG_TARGET_BCM963158=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x11000000 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_RSASSA_PSS=y @@ -20,6 +22,9 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_CMD_LZMADEC is not set # CONFIG_CMD_UNZIP is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/bcm96753ref_ram_defconfig b/configs/bcm96753ref_ram_defconfig index 9a72c75000b..59ac1cdf7e1 100644 --- a/configs/bcm96753ref_ram_defconfig +++ b/configs/bcm96753ref_ram_defconfig @@ -13,6 +13,8 @@ CONFIG_ARMV7_LPAE=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_TARGET_BCM96753REF=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_CIPHER=y @@ -23,6 +25,9 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y # CONFIG_AUTOBOOT is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_CMD_BOOTD is not set # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set diff --git a/configs/bcm968360bg_ram_defconfig b/configs/bcm968360bg_ram_defconfig index cde18125633..d327dc68b11 100644 --- a/configs/bcm968360bg_ram_defconfig +++ b/configs/bcm968360bg_ram_defconfig @@ -11,6 +11,8 @@ CONFIG_DEFAULT_DEVICE_TREE="bcm968360bg" CONFIG_SYS_LOAD_ADDR=0x10000000 CONFIG_TARGET_BCM968360BG=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x11000000 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y @@ -18,6 +20,9 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_GPIO=y CONFIG_CMD_MTD=y CONFIG_CMD_NAND=y diff --git a/configs/bcm968380gerg_ram_defconfig b/configs/bcm968380gerg_ram_defconfig index b6181a2e10e..0475535e991 100644 --- a/configs/bcm968380gerg_ram_defconfig +++ b/configs/bcm968380gerg_ram_defconfig @@ -16,8 +16,12 @@ CONFIG_MIPS_BOOT_FDT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="bcm968380gerg # " +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=545 CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y # CONFIG_CMD_BOOTD is not set diff --git a/configs/bcm968580xref_ram_defconfig b/configs/bcm968580xref_ram_defconfig index d1a17c758fc..ef5ae44345e 100644 --- a/configs/bcm968580xref_ram_defconfig +++ b/configs/bcm968580xref_ram_defconfig @@ -11,6 +11,8 @@ CONFIG_DEFAULT_DEVICE_TREE="bcm968580xref" CONFIG_SYS_LOAD_ADDR=0x10000000 CONFIG_TARGET_BCM968580XREF=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x11000000 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y @@ -18,6 +20,9 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_GPIO=y CONFIG_CMD_MTD=y CONFIG_CMD_NAND=y diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig index 9267bf36189..9446f8454c1 100644 --- a/configs/bcm_ns3_defconfig +++ b/configs/bcm_ns3_defconfig @@ -8,6 +8,8 @@ CONFIG_NR_DRAM_BANKS=2 CONFIG_ENV_SIZE=0x80000 CONFIG_DEFAULT_DEVICE_TREE="ns3-board" CONFIG_SYS_LOAD_ADDR=0x80080000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x0 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_SIGNATURE_MAX_SIZE=0x20000000 @@ -24,6 +26,8 @@ CONFIG_SILENT_U_BOOT_ONLY=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1049 # CONFIG_SYS_XTRACE is not set CONFIG_CMD_GPT=y CONFIG_CMD_GPT_RENAME=y diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 8aa8438467b..dbaa7ac3198 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -14,7 +14,17 @@ CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x800ffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra30 (Beaver) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2084 # CONFIG_CMD_IMI is not set CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/beelink-gsking-x_defconfig b/configs/beelink-gsking-x_defconfig index 841a482602f..2a7fddd7eb5 100644 --- a/configs/beelink-gsking-x_defconfig +++ b/configs/beelink-gsking-x_defconfig @@ -12,10 +12,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" beelink" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/beelink-gtking_defconfig b/configs/beelink-gtking_defconfig index f0500411c70..862445375dd 100644 --- a/configs/beelink-gtking_defconfig +++ b/configs/beelink-gtking_defconfig @@ -12,10 +12,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" beelink" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/beelink-gtkingpro_defconfig b/configs/beelink-gtkingpro_defconfig index 86c1d3f6734..f9300a21acb 100644 --- a/configs/beelink-gtkingpro_defconfig +++ b/configs/beelink-gtkingpro_defconfig @@ -12,10 +12,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" beelink" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig index 42925eabcb0..6453a72a7d7 100644 --- a/configs/beelink_gs1_defconfig +++ b/configs/beelink_gs1_defconfig @@ -8,6 +8,8 @@ CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x118000 +CONFIG_SYS_PBSIZE=1024 CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/beelink_x2_defconfig b/configs/beelink_x2_defconfig index 6206d909003..4065e64d523 100644 --- a/configs/beelink_x2_defconfig +++ b/configs/beelink_x2_defconfig @@ -6,5 +6,7 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=567 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/bitmain_antminer_s9_defconfig b/configs/bitmain_antminer_s9_defconfig index 721deb37ea2..f8ab9143587 100644 --- a/configs/bitmain_antminer_s9_defconfig +++ b/configs/bitmain_antminer_s9_defconfig @@ -27,9 +27,19 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x30000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffe00 CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="antminer> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=2075 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_DM is not set diff --git a/configs/bk4r1_defconfig b/configs/bk4r1_defconfig index 324a80e4af1..838090e3039 100644 --- a/configs/bk4r1_defconfig +++ b/configs/bk4r1_defconfig @@ -30,6 +30,8 @@ CONFIG_BOOTCOMMAND="run set_gpio122; run set_gpio96; sf probe; run manage_userda CONFIG_USE_PREBOOT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_CMD_ELF is not set CONFIG_CMD_MEMTEST=y CONFIG_CMD_DM=y diff --git a/configs/blanche_defconfig b/configs/blanche_defconfig index 1ab40d617ab..42f3dc4b6f4 100644 --- a/configs/blanche_defconfig +++ b/configs/blanche_defconfig @@ -16,9 +16,13 @@ CONFIG_R8A7792=y CONFIG_TARGET_BLANCHE=y CONFIG_SYS_LOAD_ADDR=0x50000000 CONFIG_ENV_ADDR=0x40000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4f000000 CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=256 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set @@ -53,6 +57,7 @@ CONFIG_RENESAS_SDHI=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y CONFIG_SYS_FLASH_CFI=y CONFIG_DM_SPI_FLASH=y diff --git a/configs/boston32r2_defconfig b/configs/boston32r2_defconfig index b27ce773ede..691e47c5508 100644 --- a/configs/boston32r2_defconfig +++ b/configs/boston32r2_defconfig @@ -19,6 +19,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_PROMPT="boston # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 # CONFIG_CMD_ELF is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y diff --git a/configs/boston32r2el_defconfig b/configs/boston32r2el_defconfig index 985e8bdb051..3c4aac93d89 100644 --- a/configs/boston32r2el_defconfig +++ b/configs/boston32r2el_defconfig @@ -20,6 +20,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_PROMPT="boston # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 # CONFIG_CMD_ELF is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y diff --git a/configs/boston32r6_defconfig b/configs/boston32r6_defconfig index bedac025402..30c5356c015 100644 --- a/configs/boston32r6_defconfig +++ b/configs/boston32r6_defconfig @@ -20,6 +20,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_PROMPT="boston # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 # CONFIG_CMD_ELF is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y diff --git a/configs/boston32r6el_defconfig b/configs/boston32r6el_defconfig index b90a58c502f..f1253e6a51c 100644 --- a/configs/boston32r6el_defconfig +++ b/configs/boston32r6el_defconfig @@ -21,6 +21,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_PROMPT="boston # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 # CONFIG_CMD_ELF is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y diff --git a/configs/boston64r2_defconfig b/configs/boston64r2_defconfig index bca4a0412cc..a7c67805ab1 100644 --- a/configs/boston64r2_defconfig +++ b/configs/boston64r2_defconfig @@ -20,6 +20,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_PROMPT="boston # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 # CONFIG_CMD_ELF is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y diff --git a/configs/boston64r2el_defconfig b/configs/boston64r2el_defconfig index 681c05321ae..326c757057f 100644 --- a/configs/boston64r2el_defconfig +++ b/configs/boston64r2el_defconfig @@ -21,6 +21,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_PROMPT="boston # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 # CONFIG_CMD_ELF is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y diff --git a/configs/boston64r6_defconfig b/configs/boston64r6_defconfig index 0aabb22b2fc..d31b92dc3cd 100644 --- a/configs/boston64r6_defconfig +++ b/configs/boston64r6_defconfig @@ -20,6 +20,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_PROMPT="boston # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 # CONFIG_CMD_ELF is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y diff --git a/configs/boston64r6el_defconfig b/configs/boston64r6el_defconfig index f1e0175db7b..72b3649d4a1 100644 --- a/configs/boston64r6el_defconfig +++ b/configs/boston64r6el_defconfig @@ -21,6 +21,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_PROMPT="boston # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 # CONFIG_CMD_ELF is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig index f1e7f81c401..488167e27f1 100644 --- a/configs/brppt1_mmc_defconfig +++ b/configs/brppt1_mmc_defconfig @@ -17,6 +17,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x50000 CONFIG_SYS_LOAD_ADDR=0x80000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 # CONFIG_EXPERT is not set # CONFIG_FIT is not set CONFIG_OF_BOARD_SETUP=y @@ -32,12 +34,17 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/brppt1_nand_defconfig b/configs/brppt1_nand_defconfig index d75090a245c..dce6bebd81d 100644 --- a/configs/brppt1_nand_defconfig +++ b/configs/brppt1_nand_defconfig @@ -14,6 +14,8 @@ CONFIG_TARGET_BRPPT1=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x80000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 # CONFIG_EXPERT is not set # CONFIG_FIT is not set CONFIG_OF_BOARD_SETUP=y @@ -29,6 +31,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y @@ -38,6 +42,9 @@ CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/brppt1_spi_defconfig b/configs/brppt1_spi_defconfig index 33780488e62..41dd24fedda 100644 --- a/configs/brppt1_spi_defconfig +++ b/configs/brppt1_spi_defconfig @@ -20,6 +20,8 @@ CONFIG_ENV_OFFSET_REDUND=0x30000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x80000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 # CONFIG_EXPERT is not set # CONFIG_FIT is not set CONFIG_OF_BOARD_SETUP=y @@ -36,6 +38,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set @@ -46,6 +50,9 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/brppt2_defconfig b/configs/brppt2_defconfig index ab767ab737e..db87b579eed 100644 --- a/configs/brppt2_defconfig +++ b/configs/brppt2_defconfig @@ -32,12 +32,15 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run b_default" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SYS_SPL_MALLOC=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_I2C=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMI is not set diff --git a/configs/brsmarc1_defconfig b/configs/brsmarc1_defconfig index 1eef3bde060..3134d3b4b6a 100644 --- a/configs/brsmarc1_defconfig +++ b/configs/brsmarc1_defconfig @@ -20,6 +20,8 @@ CONFIG_ENV_OFFSET_REDUND=0x30000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x80000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 # CONFIG_EXPERT is not set # CONFIG_FIT is not set CONFIG_OF_BOARD_SETUP=y @@ -35,6 +37,8 @@ CONFIG_BOARD_TYPES=y CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set @@ -44,6 +48,9 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_NETBSD is not set diff --git a/configs/brxre1_defconfig b/configs/brxre1_defconfig index c1acbe0259e..c39389451f1 100644 --- a/configs/brxre1_defconfig +++ b/configs/brxre1_defconfig @@ -17,6 +17,8 @@ CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000 CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x50000 CONFIG_SYS_LOAD_ADDR=0x80000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 # CONFIG_EXPERT is not set # CONFIG_FIT is not set CONFIG_OF_BOARD_SETUP=y @@ -31,11 +33,16 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_POWER=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_NETBSD is not set diff --git a/configs/bubblegum_96_defconfig b/configs/bubblegum_96_defconfig index a21b245c845..0daff7d1505 100644 --- a/configs/bubblegum_96_defconfig +++ b/configs/bubblegum_96_defconfig @@ -8,12 +8,16 @@ CONFIG_MACH_S900=y CONFIG_IDENT_STRING="\nBubblegum-96" CONFIG_SYS_LOAD_ADDR=0x7ffc0 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1107ff00 CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyOWL5,115200n8" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot => " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1051 CONFIG_CMD_MD5SUM=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_CACHE=y diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index a2126eeadff..bf8504fd725 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -13,7 +13,17 @@ CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x800ffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2084 # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/cei-tk1-som_defconfig b/configs/cei-tk1-som_defconfig index 197d462ce06..f55848ab2c0 100644 --- a/configs/cei-tk1-som_defconfig +++ b/configs/cei-tk1-som_defconfig @@ -15,7 +15,17 @@ CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x800ffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra124 (TK1-SOM) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2086 # CONFIG_CMD_IMI is not set CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/cgtqmx8_defconfig b/configs/cgtqmx8_defconfig index c53fa742751..17219969f60 100644 --- a/configs/cgtqmx8_defconfig +++ b/configs/cgtqmx8_defconfig @@ -16,6 +16,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x80280000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y @@ -26,13 +28,25 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x128000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x13e000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x3000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=0 CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_CPU=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_IMPORTENV is not set diff --git a/configs/cherryhill_defconfig b/configs/cherryhill_defconfig index 38302ddc2f2..1d4256e37ba 100644 --- a/configs/cherryhill_defconfig +++ b/configs/cherryhill_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y diff --git a/configs/chiliboard_defconfig b/configs/chiliboard_defconfig index 1b03d836944..849d751f08e 100644 --- a/configs/chiliboard_defconfig +++ b/configs/chiliboard_defconfig @@ -16,18 +16,23 @@ CONFIG_ENV_OFFSET_REDUND=0x22000 CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030fef0 CONFIG_TIMESTAMP=y CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run mmcboot; run nandboot; run netboot" CONFIG_DEFAULT_FDT_FILE="am335x-chiliboard.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/chromebit_mickey_defconfig b/configs/chromebit_mickey_defconfig index 81662915d24..862b37d0fb6 100644 --- a/configs/chromebit_mickey_defconfig +++ b/configs/chromebit_mickey_defconfig @@ -18,12 +18,18 @@ CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_SPL_PAYLOAD="u-boot.img" CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-mickey.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig index 1b2db5d0a8f..84fe5be19d5 100644 --- a/configs/chromebook_bob_defconfig +++ b/configs/chromebook_bob_defconfig @@ -18,6 +18,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y @@ -26,8 +28,15 @@ CONFIG_MISC_INIT_R=y CONFIG_BLOBLIST=y CONFIG_BLOBLIST_ADDR=0x100000 CONFIG_BLOBLIST_SIZE=0x1000 +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xff8e0000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 CONFIG_HANDOFF=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff8effff CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 CONFIG_SPL_SPI_LOAD=y diff --git a/configs/chromebook_coral_defconfig b/configs/chromebook_coral_defconfig index 82692542078..298f4be7c44 100644 --- a/configs/chromebook_coral_defconfig +++ b/configs/chromebook_coral_defconfig @@ -41,6 +41,7 @@ CONFIG_BLOBLIST=y # CONFIG_TPL_BLOBLIST is not set CONFIG_BLOBLIST_ADDR=0x100000 CONFIG_BLOBLIST_SIZE=0x30000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_HANDOFF=y CONFIG_TPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y @@ -51,6 +52,7 @@ CONFIG_SPL_POWER=y # CONFIG_SPL_SPI_FLASH_TINY is not set CONFIG_TPL_POWER=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_PMC=y CONFIG_CMD_GPIO=y diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig index d3d9f8fc0ba..a0f15f6e7b2 100644 --- a/configs/chromebook_jerry_defconfig +++ b/configs/chromebook_jerry_defconfig @@ -17,6 +17,8 @@ CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_SPL_PAYLOAD="u-boot.img" CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-jerry.dtb" CONFIG_SILENT_CONSOLE=y @@ -24,7 +26,11 @@ CONFIG_LOG=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set diff --git a/configs/chromebook_kevin_defconfig b/configs/chromebook_kevin_defconfig index ad6cbca198b..669d6f570b9 100644 --- a/configs/chromebook_kevin_defconfig +++ b/configs/chromebook_kevin_defconfig @@ -19,6 +19,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-kevin.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y @@ -27,8 +29,15 @@ CONFIG_MISC_INIT_R=y CONFIG_BLOBLIST=y CONFIG_BLOBLIST_ADDR=0x100000 CONFIG_BLOBLIST_SIZE=0x1000 +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xff8e0000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 CONFIG_HANDOFF=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff8effff CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 CONFIG_SPL_SPI_LOAD=y diff --git a/configs/chromebook_link64_defconfig b/configs/chromebook_link64_defconfig index b29c5ccd7a4..28206ee8cec 100644 --- a/configs/chromebook_link64_defconfig +++ b/configs/chromebook_link64_defconfig @@ -32,6 +32,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_CPU=y CONFIG_SPL_ENV_SUPPORT=y @@ -42,6 +43,7 @@ CONFIG_SPL_PCI=y CONFIG_SPL_PCH=y CONFIG_SPL_RTC=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_SPI=y diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig index 9186621f8d0..46ac5d5272e 100644 --- a/configs/chromebook_link_defconfig +++ b/configs/chromebook_link_defconfig @@ -28,6 +28,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_PART=y diff --git a/configs/chromebook_minnie_defconfig b/configs/chromebook_minnie_defconfig index 63899f37aaa..513e5f85e9c 100644 --- a/configs/chromebook_minnie_defconfig +++ b/configs/chromebook_minnie_defconfig @@ -18,13 +18,19 @@ CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_SPL_PAYLOAD="u-boot.img" CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-minnie.dtb" CONFIG_SILENT_CONSOLE=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set diff --git a/configs/chromebook_samus_defconfig b/configs/chromebook_samus_defconfig index 93f1d403fa2..e6d37307b09 100644 --- a/configs/chromebook_samus_defconfig +++ b/configs/chromebook_samus_defconfig @@ -28,6 +28,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/chromebook_samus_tpl_defconfig b/configs/chromebook_samus_tpl_defconfig index 36871182395..5ad17d217b1 100644 --- a/configs/chromebook_samus_tpl_defconfig +++ b/configs/chromebook_samus_tpl_defconfig @@ -35,6 +35,7 @@ CONFIG_MISC_INIT_R=y CONFIG_BLOBLIST=y CONFIG_BLOBLIST_ADDR=0xff7c0000 CONFIG_BLOBLIST_SIZE=0x1000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_HANDOFF=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_DM_SPI_FLASH=y @@ -46,6 +47,7 @@ CONFIG_TPL_PCH=y CONFIG_TPL_DM_SPI=y CONFIG_TPL_DM_SPI_FLASH=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/chromebook_speedy_defconfig b/configs/chromebook_speedy_defconfig index 9343263be5e..7fc505ee4e3 100644 --- a/configs/chromebook_speedy_defconfig +++ b/configs/chromebook_speedy_defconfig @@ -18,13 +18,19 @@ CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_SPL_PAYLOAD="u-boot.img" CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-speedy.dtb" CONFIG_SILENT_CONSOLE=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig index 363b5f39f01..c909d316a34 100644 --- a/configs/chromebox_panther_defconfig +++ b/configs/chromebox_panther_defconfig @@ -24,6 +24,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GPIO=y CONFIG_CMD_PART=y CONFIG_CMD_SPI=y diff --git a/configs/ci20_mmc_defconfig b/configs/ci20_mmc_defconfig index 867b9bba7e0..983642dac5c 100644 --- a/configs/ci20_mmc_defconfig +++ b/configs/ci20_mmc_defconfig @@ -22,11 +22,18 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_MAX_SIZE=0x2e00 +CONFIG_SPL_BSS_START_ADDR=0xf4004000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xf4008000 # CONFIG_SPL_BANNER_PRINT is not set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1c CONFIG_SPL_MMC_TINY=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_DM=y CONFIG_CMD_MMC=y CONFIG_CMD_DHCP=y diff --git a/configs/cl-som-imx7_defconfig b/configs/cl-som-imx7_defconfig index 7c708257b48..075d8678c8a 100644 --- a/configs/cl-som-imx7_defconfig +++ b/configs/cl-som-imx7_defconfig @@ -25,12 +25,18 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="echo SD boot attempt ...; run sdbootscript; run sdboot; echo eMMC boot attempt ...; run emmcbootscript; run emmcboot; echo USB boot attempt ...; run usbbootscript; " CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0xe000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_MAX_SIZE=0x100000 CONFIG_SPL_BOARD_INIT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80 CONFIG_SPL_I2C=y CONFIG_SPL_SPI_LOAD=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CL-SOM-iMX7 # " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=543 CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig index 9f744d0caf9..bec36beb855 100644 --- a/configs/clearfog_defconfig +++ b/configs/clearfog_defconfig @@ -19,12 +19,22 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_BOOTDELAY=3 CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x22fd0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x40023000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4002c000 CONFIG_SPL_I2C=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_TLV_EEPROM=y CONFIG_SPL_CMD_TLV_EEPROM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/clearfog_gt_8k_defconfig b/configs/clearfog_gt_8k_defconfig index a82cbafb798..a45c02061ee 100644 --- a/configs/clearfog_gt_8k_defconfig +++ b/configs/clearfog_gt_8k_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y @@ -23,6 +25,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_EARLY_INIT_R=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index cfa32815748..16e619b38a5 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -30,12 +30,15 @@ CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run legacy_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="usb start;sf probe" CONFIG_MISC_INIT_R=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80 CONFIG_SPL_I2C=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="CM-FX6 # " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=538 # CONFIG_CMD_XIMG is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig index 0b4912bba3d..0c2e8a35ef8 100644 --- a/configs/cm_t335_defconfig +++ b/configs/cm_t335_defconfig @@ -14,9 +14,13 @@ CONFIG_SPL=y CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_TIMESTAMP=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y CONFIG_SPL_MTD_SUPPORT=y @@ -27,6 +31,8 @@ CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set CONFIG_SYS_PROMPT="CM-T335 # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1051 CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_EEPROM_LAYOUT=y diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig index 7a0cd52d737..30afd5e7d00 100644 --- a/configs/cm_t43_defconfig +++ b/configs/cm_t43_defconfig @@ -22,11 +22,16 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00 CONFIG_BOOTCOMMAND="mmc dev 0; if mmc rescan; then if run loadbootscript; then run bootscript; fi; fi; mmc dev 1; if mmc rescan; then run emmcboot; fi;" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x37690 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x480 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y @@ -40,6 +45,8 @@ CONFIG_SPL_POWER=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_SYS_PROMPT="CM-T43 # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_EEPROM_LAYOUT=y diff --git a/configs/cobra5272_defconfig b/configs/cobra5272_defconfig index eacfc661433..42f6087d83c 100644 --- a/configs/cobra5272_defconfig +++ b/configs/cobra5272_defconfig @@ -11,9 +11,11 @@ CONFIG_MCFTMR=y CONFIG_SYS_MONITOR_BASE=0xFFE00400 CONFIG_BOOTDELAY=5 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="COBRA > " +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_IMLS=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/colibri-imx6ull-emmc_defconfig b/configs/colibri-imx6ull-emmc_defconfig index eb4b6a79eaa..bfbbf34ae5c 100644 --- a/configs/colibri-imx6ull-emmc_defconfig +++ b/configs/colibri-imx6ull-emmc_defconfig @@ -21,6 +21,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SYS_PROMPT="Colibri iMX6ULL # " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=547 # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set # CONFIG_CMD_ELF is not set diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig index d0825472b2f..750b03b74d8 100644 --- a/configs/colibri-imx6ull_defconfig +++ b/configs/colibri-imx6ull_defconfig @@ -23,6 +23,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SYS_PROMPT="Colibri iMX6ULL # " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=547 # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set # CONFIG_CMD_ELF is not set diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig index 0c9d6b64c1b..964d5bebc12 100644 --- a/configs/colibri-imx8x_defconfig +++ b/configs/colibri-imx8x_defconfig @@ -13,6 +13,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000 CONFIG_SYS_MEMTEST_START=0x88000000 CONFIG_SYS_MEMTEST_END=0x89000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -20,6 +22,9 @@ CONFIG_LOG=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_CPU=y # CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_ASKENV=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index 4f38d5cb483..44e2ff09409 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -35,12 +35,16 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_SYS_PROMPT="Colibri iMX6 # " +CONFIG_SYS_MAXARGS=48 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1056 # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig index 973afc1a2b4..f56064d34d3 100644 --- a/configs/colibri_imx7_defconfig +++ b/configs/colibri_imx7_defconfig @@ -25,6 +25,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y CONFIG_SYS_PROMPT="Colibri iMX7 # " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=544 # CONFIG_CMD_BOOTD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig index 01b1cb8b552..361077ee84e 100644 --- a/configs/colibri_imx7_emmc_defconfig +++ b/configs/colibri_imx7_emmc_defconfig @@ -24,6 +24,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y CONFIG_SYS_PROMPT="Colibri iMX7 # " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=544 # CONFIG_CMD_BOOTD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig index 00f45dc115f..92d9dfed30f 100644 --- a/configs/colibri_t20_defconfig +++ b/configs/colibri_t20_defconfig @@ -16,7 +16,18 @@ CONFIG_SYS_STDIO_DEREGISTER=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Colibri T20 # " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1055 # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index abbc0662bae..a9fe05246d6 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -17,7 +17,18 @@ CONFIG_SYS_STDIO_DEREGISTER=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x800ffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Colibri T30 # " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1055 # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index c5f4322923b..d92756fb166 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -29,6 +29,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y # CONFIG_SYS_LONGHELP is not set CONFIG_SYS_PROMPT="Colibri VFxx # " +CONFIG_SYS_PBSIZE=1056 # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_BOOTM is not set CONFIG_CMD_BOOTZ=y diff --git a/configs/colorfly_e708_q1_defconfig b/configs/colorfly_e708_q1_defconfig index 5d3636e34e8..f17083310a2 100644 --- a/configs/colorfly_e708_q1_defconfig +++ b/configs/colorfly_e708_q1_defconfig @@ -16,6 +16,8 @@ CONFIG_VIDEO_LCD_BL_EN="PA25" CONFIG_VIDEO_LCD_BL_PWM="PH13" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_AXP_DLDO2_VOLT=1800 CONFIG_USB_MUSB_HOST=y diff --git a/configs/comtrend_ar5315u_ram_defconfig b/configs/comtrend_ar5315u_ram_defconfig index b2eb24d2e80..170b766089d 100644 --- a/configs/comtrend_ar5315u_ram_defconfig +++ b/configs/comtrend_ar5315u_ram_defconfig @@ -17,8 +17,12 @@ CONFIG_MIPS_BOOT_FDT=y CONFIG_REMAKE_ELF=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="AR-5315un # " +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=541 CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y # CONFIG_CMD_BOOTD is not set diff --git a/configs/comtrend_ar5387un_ram_defconfig b/configs/comtrend_ar5387un_ram_defconfig index bebb4b29981..599fda481aa 100644 --- a/configs/comtrend_ar5387un_ram_defconfig +++ b/configs/comtrend_ar5387un_ram_defconfig @@ -17,8 +17,12 @@ CONFIG_MIPS_BOOT_FDT=y CONFIG_REMAKE_ELF=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="AR-5387un # " +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=541 CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y # CONFIG_CMD_BOOTD is not set diff --git a/configs/comtrend_ct5361_ram_defconfig b/configs/comtrend_ct5361_ram_defconfig index a2011b9663e..b1ad57b5a56 100644 --- a/configs/comtrend_ct5361_ram_defconfig +++ b/configs/comtrend_ct5361_ram_defconfig @@ -17,8 +17,12 @@ CONFIG_MIPS_BOOT_FDT=y CONFIG_REMAKE_ELF=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CT-5361 # " +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=539 CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y # CONFIG_CMD_BOOTD is not set diff --git a/configs/comtrend_vr3032u_ram_defconfig b/configs/comtrend_vr3032u_ram_defconfig index 8d5646167f7..d07895de9b8 100644 --- a/configs/comtrend_vr3032u_ram_defconfig +++ b/configs/comtrend_vr3032u_ram_defconfig @@ -17,8 +17,12 @@ CONFIG_MIPS_BOOT_FDT=y CONFIG_REMAKE_ELF=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="VR-3032u # " +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=540 CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y # CONFIG_CMD_BOOTD is not set diff --git a/configs/comtrend_wap5813n_ram_defconfig b/configs/comtrend_wap5813n_ram_defconfig index a8004d8af8e..ca370e66a34 100644 --- a/configs/comtrend_wap5813n_ram_defconfig +++ b/configs/comtrend_wap5813n_ram_defconfig @@ -17,8 +17,12 @@ CONFIG_MIPS_BOOT_FDT=y CONFIG_REMAKE_ELF=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="WAP-5813n # " +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=541 CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y # CONFIG_CMD_BOOTD is not set diff --git a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig index 1c5efec707f..c41b83121e7 100644 --- a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig +++ b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig @@ -32,6 +32,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/conga-qeval20-qa3-e3845_defconfig b/configs/conga-qeval20-qa3-e3845_defconfig index 5aba0e2f7f7..84ba5cadfec 100644 --- a/configs/conga-qeval20-qa3-e3845_defconfig +++ b/configs/conga-qeval20-qa3-e3845_defconfig @@ -28,6 +28,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig index c366db40e6f..2fc7ba475a3 100644 --- a/configs/controlcenterdc_defconfig +++ b/configs/controlcenterdc_defconfig @@ -22,6 +22,8 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_OF_BOARD_FIXUP=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y @@ -32,10 +34,17 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y CONFIG_LAST_STAGE_INIT=y +CONFIG_SPL_MAX_SIZE=0x27fd0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x40028000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x40031000 CONFIG_SPL_I2C=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_ELF is not set # CONFIG_CMD_GO is not set CONFIG_CMD_GPIO=y diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig index 34278487486..3bd099e7231 100644 --- a/configs/coreboot64_defconfig +++ b/configs/coreboot64_defconfig @@ -20,7 +20,9 @@ CONFIG_PRE_CONSOLE_BUFFER=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y diff --git a/configs/coreboot_defconfig b/configs/coreboot_defconfig index b09f3f03601..792d35eec58 100644 --- a/configs/coreboot_defconfig +++ b/configs/coreboot_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y diff --git a/configs/cortina_presidio-asic-base_defconfig b/configs/cortina_presidio-asic-base_defconfig index 6514f0753e4..3edc532e31e 100644 --- a/configs/cortina_presidio-asic-base_defconfig +++ b/configs/cortina_presidio-asic-base_defconfig @@ -11,6 +11,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" CONFIG_IDENT_STRING="Presidio-SoC" CONFIG_SYS_LOAD_ADDR=0x10000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_REMAKE_ELF=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SHOW_BOOT_PROGRESS=y @@ -20,6 +22,9 @@ CONFIG_BOOTARGS="earlycon=serial,0xf4329148 console=ttyS0,115200 root=/dev/ram0" CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_SYS_PROMPT="G3#" +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_WDT=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIMER=y diff --git a/configs/cortina_presidio-asic-emmc_defconfig b/configs/cortina_presidio-asic-emmc_defconfig index b8a1c96c834..becb1beb1f9 100644 --- a/configs/cortina_presidio-asic-emmc_defconfig +++ b/configs/cortina_presidio-asic-emmc_defconfig @@ -11,6 +11,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" CONFIG_IDENT_STRING="Presidio-SoC" CONFIG_SYS_LOAD_ADDR=0x10000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_REMAKE_ELF=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SHOW_BOOT_PROGRESS=y @@ -18,6 +20,9 @@ CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_SYS_PROMPT="G3#" +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_WDT=y diff --git a/configs/cortina_presidio-asic-pnand_defconfig b/configs/cortina_presidio-asic-pnand_defconfig index 944fed6ca03..842ec9fa92a 100644 --- a/configs/cortina_presidio-asic-pnand_defconfig +++ b/configs/cortina_presidio-asic-pnand_defconfig @@ -11,6 +11,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" CONFIG_IDENT_STRING="Presidio-SoC" CONFIG_SYS_LOAD_ADDR=0x10000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_REMAKE_ELF=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_SHOW_BOOT_PROGRESS=y @@ -20,6 +22,9 @@ CONFIG_BOOTARGS="earlycon=serial,0xf4329148 console=ttyS0,115200 root=/dev/ram0" CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_SYS_PROMPT="G3#" +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_MTD=y CONFIG_CMD_WDT=y CONFIG_CMD_CACHE=y diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig index c0ae60f7e33..859c9a31040 100644 --- a/configs/corvus_defconfig +++ b/configs/corvus_defconfig @@ -22,6 +22,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x180000 CONFIG_SYS_LOAD_ADDR=0x70000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70007f00 CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -30,13 +32,24 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x3000 +CONFIG_SPL_PAD_TO=0x20000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x3000 +CONFIG_SPL_BSS_MAX_SIZE=0x800 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4000 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y +CONFIG_SPL_NAND_SOFTECC=y CONFIG_SPL_NAND_BASE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/cougarcanyon2_defconfig b/configs/cougarcanyon2_defconfig index 9226c780d9a..09a6e4bc001 100644 --- a/configs/cougarcanyon2_defconfig +++ b/configs/cougarcanyon2_defconfig @@ -21,6 +21,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_PART=y diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig index 590fee97942..addaf3b7f79 100644 --- a/configs/crownbay_defconfig +++ b/configs/crownbay_defconfig @@ -23,6 +23,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/crs305-1g-4s-bit_defconfig b/configs/crs305-1g-4s-bit_defconfig index 2ebba329475..01e784efa85 100644 --- a/configs/crs305-1g-4s-bit_defconfig +++ b/configs/crs305-1g-4s-bit_defconfig @@ -11,6 +11,8 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs305-1g-4s-bit" CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BUILD_TARGET="u-boot.kwb" +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y @@ -21,6 +23,7 @@ CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=96 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MTD=y diff --git a/configs/crs305-1g-4s_defconfig b/configs/crs305-1g-4s_defconfig index 54f5268beaf..98e10d509dd 100644 --- a/configs/crs305-1g-4s_defconfig +++ b/configs/crs305-1g-4s_defconfig @@ -11,6 +11,8 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs305-1g-4s" CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BUILD_TARGET="u-boot.kwb" +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y @@ -21,6 +23,7 @@ CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=96 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MTD=y diff --git a/configs/crs326-24g-2s-bit_defconfig b/configs/crs326-24g-2s-bit_defconfig index fd31efdd223..dd04bd18a1c 100644 --- a/configs/crs326-24g-2s-bit_defconfig +++ b/configs/crs326-24g-2s-bit_defconfig @@ -11,6 +11,8 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs326-24g-2s-bit" CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BUILD_TARGET="u-boot.kwb" +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y @@ -21,6 +23,7 @@ CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=96 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MTD=y diff --git a/configs/crs326-24g-2s_defconfig b/configs/crs326-24g-2s_defconfig index 8c12c595775..8f7b839460b 100644 --- a/configs/crs326-24g-2s_defconfig +++ b/configs/crs326-24g-2s_defconfig @@ -11,6 +11,8 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs326-24g-2s" CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BUILD_TARGET="u-boot.kwb" +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y @@ -21,6 +23,7 @@ CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=96 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MTD=y diff --git a/configs/crs328-4c-20s-4s-bit_defconfig b/configs/crs328-4c-20s-4s-bit_defconfig index 2334d1e88ca..68a47fc7c21 100644 --- a/configs/crs328-4c-20s-4s-bit_defconfig +++ b/configs/crs328-4c-20s-4s-bit_defconfig @@ -11,6 +11,8 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs328-4c-20s-4s-bit" CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BUILD_TARGET="u-boot.kwb" +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y @@ -21,6 +23,7 @@ CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=96 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MTD=y diff --git a/configs/crs328-4c-20s-4s_defconfig b/configs/crs328-4c-20s-4s_defconfig index 09c3b7c2934..fbf81013634 100644 --- a/configs/crs328-4c-20s-4s_defconfig +++ b/configs/crs328-4c-20s-4s_defconfig @@ -11,6 +11,8 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs328-4c-20s-4s" CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BUILD_TARGET="u-boot.kwb" +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y @@ -21,6 +23,7 @@ CONFIG_AUTOBOOT_KEYED_CTRLC=y CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=96 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MTD=y diff --git a/configs/cubieboard7_defconfig b/configs/cubieboard7_defconfig index 677bff64b90..223a775387a 100644 --- a/configs/cubieboard7_defconfig +++ b/configs/cubieboard7_defconfig @@ -7,12 +7,16 @@ CONFIG_MACH_S700=y CONFIG_IDENT_STRING="\ncubieboard7" CONFIG_SYS_LOAD_ADDR=0x7ffc0 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1107ff00 CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyOWL3,115200n8" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot => " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1051 CONFIG_CMD_MMC=y CONFIG_MMC_OWL=y CONFIG_PHY_REALTEK=y diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig index 897c00e523c..4eb74f759f5 100644 --- a/configs/d2net_v2_defconfig +++ b/configs/d2net_v2_defconfig @@ -14,6 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-d2net" CONFIG_IDENT_STRING=" D2 v2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -27,6 +29,8 @@ CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="d2v2> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1047 CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 CONFIG_CMD_I2C=y diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig index bfc8488e0e8..de2d709a7a2 100644 --- a/configs/da850evm_defconfig +++ b/configs/da850evm_defconfig @@ -23,6 +23,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0xc0700000 CONFIG_LTO=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0000f20 CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y @@ -33,13 +35,25 @@ CONFIG_DEFAULT_FDT_FILE="da850-evm.dtb" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_CLOCKS=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_PAD_TO=0x8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xc0000000 +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x8001ff00 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0f70000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x110000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x8000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_PBSIZE=1050 CONFIG_CRC32_VERIFY=y CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_DM=y diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig index b1d84f1594e..88ef772d9d5 100644 --- a/configs/da850evm_direct_nor_defconfig +++ b/configs/da850evm_direct_nor_defconfig @@ -16,6 +16,8 @@ CONFIG_DEFAULT_DEVICE_TREE="da850-evm" CONFIG_SYS_LOAD_ADDR=0xc0700000 CONFIG_ENV_ADDR=0x60100000 CONFIG_LTO=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8001ff00 CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -29,6 +31,7 @@ CONFIG_CLOCKS=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_PBSIZE=1050 # CONFIG_CMD_BOOTZ is not set CONFIG_CMD_IMLS=y CONFIG_CRC32_VERIFY=y diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig index 0f5e135f1bf..052ef307033 100644 --- a/configs/da850evm_nand_defconfig +++ b/configs/da850evm_nand_defconfig @@ -21,6 +21,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0xc0700000 CONFIG_LTO=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0000f20 CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y @@ -30,7 +32,18 @@ CONFIG_DEFAULT_FDT_FILE="da850-evm.dtb" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xc0000000 +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x8001ff00 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0f70000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x110000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y @@ -39,6 +52,7 @@ CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_PBSIZE=1050 CONFIG_CRC32_VERIFY=y CONFIG_CMD_MX_CYCLIC=y CONFIG_CMD_DM=y diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index 03f938455ed..64d788f6632 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -14,7 +14,17 @@ CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x800ffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra114 (Dalmore) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2086 # CONFIG_CMD_IMI is not set CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/db-88f6720_defconfig b/configs/db-88f6720_defconfig index 8ebc7811143..c08203e030a 100644 --- a/configs/db-88f6720_defconfig +++ b/configs/db-88f6720_defconfig @@ -17,13 +17,23 @@ CONFIG_DEBUG_UART_BASE=0xf1012000 CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_BOOTDELAY=3 CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x1ffd0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x40020000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4002c000 CONFIG_SPL_I2C=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_I2C=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y diff --git a/configs/db-88f6820-amc_defconfig b/configs/db-88f6820-amc_defconfig index be4ee791351..fd2d5ee2ca9 100644 --- a/configs/db-88f6820-amc_defconfig +++ b/configs/db-88f6820-amc_defconfig @@ -17,6 +17,8 @@ CONFIG_DEBUG_UART_BASE=0xf1012000 CONFIG_DEBUG_UART_CLOCK=200000000 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_BOOTDELAY=3 @@ -24,7 +26,15 @@ CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x22fd0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x40023000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4002c000 CONFIG_SPL_I2C=y +CONFIG_SYS_MAXARGS=96 # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y CONFIG_CMD_PCI=y diff --git a/configs/db-88f6820-gp_defconfig b/configs/db-88f6820-gp_defconfig index 55ebb57c692..7d039d664a1 100644 --- a/configs/db-88f6820-gp_defconfig +++ b/configs/db-88f6820-gp_defconfig @@ -18,12 +18,22 @@ CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_BOOTDELAY=3 CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x22fd0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x40023000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4002c000 CONFIG_SPL_I2C=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig index 2c1d3b464d8..4fe0d3ec24e 100644 --- a/configs/db-mv784mp-gp_defconfig +++ b/configs/db-mv784mp-gp_defconfig @@ -17,13 +17,23 @@ CONFIG_DEBUG_UART_BASE=0xf1012000 CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_BOOTDELAY=3 CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x1bfd0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x40020000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4002c000 CONFIG_SPL_I2C=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y CONFIG_CMD_PCI=y diff --git a/configs/db-xc3-24g4xg_defconfig b/configs/db-xc3-24g4xg_defconfig index 58fcf96c760..995835a96b3 100644 --- a/configs/db-xc3-24g4xg_defconfig +++ b/configs/db-xc3-24g4xg_defconfig @@ -12,11 +12,14 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_BUILD_TARGET="u-boot.kwb" CONFIG_SYS_MEMTEST_START=0x00800000 CONFIG_SYS_MEMTEST_END=0x00ffffff +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_BEST_MATCH=y CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SYS_MAXARGS=96 CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y # CONFIG_CMD_FLASH is not set diff --git a/configs/deneb_defconfig b/configs/deneb_defconfig index 425fff6c70a..309545be531 100644 --- a/configs/deneb_defconfig +++ b/configs/deneb_defconfig @@ -22,6 +22,8 @@ CONFIG_IDENT_STRING=" ##v01.06" CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg" CONFIG_SYS_LOAD_ADDR=0x80280000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y @@ -34,14 +36,27 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x128000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x13e000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x3000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2073 CONFIG_CMD_CPU=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index 71e80e80485..5290ac5e82e 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -16,6 +16,8 @@ CONFIG_SPL_TEXT_BASE=0x00000000 CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x80008000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f20 CONFIG_BOOTDELAY=1 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200n8" @@ -23,11 +25,17 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="dhcp; tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; setenv bootargs ${bootargs} ${nfsargs} ${userargs}; bootm ${loadaddr} - ${dtbaddr}" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfff8 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y +CONFIG_SPL_NAND_SOFTECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_CMD_IMLS=y CONFIG_CMD_GPIO=y diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index be780949ec3..4e144a9c169 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -8,15 +8,27 @@ CONFIG_SPL_TEXT_BASE=0x40200000 CONFIG_TARGET_DEVKIT8000=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00 CONFIG_BOOTCOMMAND="run autoboot" CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SPL_MAX_SIZE=0xec00 +CONFIG_SPL_BSS_START_ADDR=0x80000500 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x80000100 +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x8 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=8 +CONFIG_SYS_MAXARGS=64 # CONFIG_CMD_IMI is not set CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x680000 diff --git a/configs/dfi-bt700-q7x-151_defconfig b/configs/dfi-bt700-q7x-151_defconfig index 0dfb7bbe025..177764ef80c 100644 --- a/configs/dfi-bt700-q7x-151_defconfig +++ b/configs/dfi-bt700-q7x-151_defconfig @@ -27,6 +27,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index 558619fc310..a659e996b5c 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -35,8 +35,11 @@ CONFIG_SPL_FIT=y CONFIG_BOOTDELAY=3 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400 +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y CONFIG_CMD_DFU=y diff --git a/configs/difrnce_dit4350_defconfig b/configs/difrnce_dit4350_defconfig index e1067b66eec..a3917eaf179 100644 --- a/configs/difrnce_dit4350_defconfig +++ b/configs/difrnce_dit4350_defconfig @@ -15,7 +15,9 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/display5_defconfig b/configs/display5_defconfig index fa271b24028..f586596ee92 100644 --- a/configs/display5_defconfig +++ b/configs/display5_defconfig @@ -37,18 +37,25 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="if run check_em_pad; then run recovery;else if test ${BOOT_FROM} = FACTORY; then run factory_nfs;else run boot_mmc;fi;fi" CONFIG_MISC_INIT_R=y CONFIG_SPL_BOOTCOUNT_LIMIT=y +CONFIG_SYS_SPL_MALLOC=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SAVEENV=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x100 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x3F00 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x10 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="display5 > " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2076 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_ELF is not set CONFIG_CMD_SPL=y diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig index 45b6b964491..e2f35a9790c 100644 --- a/configs/display5_factory_defconfig +++ b/configs/display5_factory_defconfig @@ -34,12 +34,16 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="echo SDP Display5 recovery" CONFIG_MISC_INIT_R=y +CONFIG_SYS_SPL_MALLOC=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x100 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x3F00 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x10 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 CONFIG_SPL_USB_HOST=y @@ -47,6 +51,9 @@ CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="display5 factory > " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2084 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_ELF is not set CONFIG_CMD_SPL=y diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig index 96088a177a8..585f44d85d3 100644 --- a/configs/dns325_defconfig +++ b/configs/dns325_defconfig @@ -12,6 +12,8 @@ CONFIG_ENV_OFFSET=0xE0000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dns325" CONFIG_IDENT_STRING="\nD-Link DNS-325" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y @@ -21,6 +23,7 @@ CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y CONFIG_CMD_NAND=y diff --git a/configs/dockstar_defconfig b/configs/dockstar_defconfig index a740da9fc0d..3cb09ea4f7f 100644 --- a/configs/dockstar_defconfig +++ b/configs/dockstar_defconfig @@ -13,6 +13,8 @@ CONFIG_ENV_OFFSET=0x80000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dockstar" CONFIG_IDENT_STRING="\nSeagate FreeAgent DockStar" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y @@ -21,6 +23,8 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="DockStar> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1051 # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y CONFIG_CMD_USB=y diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index e972d3b1170..aae84dc6ade 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -16,6 +16,8 @@ CONFIG_SPL_SPI=y CONFIG_ARMV7_LPAE=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4037fef0 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000 # CONFIG_USE_SPL_FIT_GENERATOR is not set @@ -26,20 +28,28 @@ CONFIG_BOOTCOMMAND="if test ${dofastboot} -eq 1; then echo Boot fastboot request CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x7bc00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_DMA=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x200000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_SPL=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 # CONFIG_CMD_FLASH is not set diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig index 3c9293d8b08..51ffd2779c1 100644 --- a/configs/dra7xx_hs_evm_defconfig +++ b/configs/dra7xx_hs_evm_defconfig @@ -19,6 +19,8 @@ CONFIG_SPL_SPI=y CONFIG_ARMV7_LPAE=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4037fef0 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000 # CONFIG_USE_SPL_FIT_GENERATOR is not set @@ -29,8 +31,12 @@ CONFIG_BOOTCOMMAND="if test ${dofastboot} -eq 1; then echo Boot fastboot request CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x7a8b0 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_DMA=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -41,6 +47,7 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig index 5560a1ba184..34dcdede923 100644 --- a/configs/dra7xx_hs_evm_usb_defconfig +++ b/configs/dra7xx_hs_evm_usb_defconfig @@ -21,6 +21,8 @@ CONFIG_SPL_SPI=y CONFIG_ARMV7_LPAE=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4037fef0 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000 # CONFIG_USE_SPL_FIT_GENERATOR is not set @@ -31,8 +33,12 @@ CONFIG_BOOTCOMMAND="if test ${dofastboot} -eq 1; then echo Boot fastboot request CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0x74eb0 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_DMA=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_RAM_SUPPORT=y @@ -41,6 +47,7 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set diff --git a/configs/draco_defconfig b/configs/draco_defconfig index 264a51b0739..f7bb01f3bf3 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -23,6 +23,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" @@ -34,6 +36,10 @@ CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_BSS_START_ADDR=0x80000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -46,6 +52,8 @@ CONFIG_SPL_YMODEM_SUPPORT=y # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig index dc136f98612..2bf759d8437 100644 --- a/configs/dragonboard410c_defconfig +++ b/configs/dragonboard410c_defconfig @@ -10,6 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="dragonboard410c" CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C" CONFIG_SYS_LOAD_ADDR=0x80080000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007fff0 CONFIG_REMAKE_ELF=y # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y @@ -19,6 +21,9 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_SYS_PROMPT="dragonboard410c => " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=548 # CONFIG_CMD_IMI is not set CONFIG_CMD_MD5SUM=y CONFIG_CMD_MEMINFO=y diff --git a/configs/dragonboard820c_defconfig b/configs/dragonboard820c_defconfig index 3bd22aa34f0..2ede13fed1b 100644 --- a/configs/dragonboard820c_defconfig +++ b/configs/dragonboard820c_defconfig @@ -10,6 +10,8 @@ CONFIG_TARGET_DRAGONBOARD820C=y CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 820C" CONFIG_SYS_LOAD_ADDR=0x80080000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007fff0 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyMSM0,115200n8" # CONFIG_USE_BOOTCOMMAND is not set @@ -17,6 +19,9 @@ CONFIG_BOOTARGS="console=ttyMSM0,115200n8" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_SYS_PROMPT="dragonboard820c => " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=548 CONFIG_CMD_MD5SUM=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_GPIO=y diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig index 5f9073d2e62..80be9b853cb 100644 --- a/configs/dreamplug_defconfig +++ b/configs/dreamplug_defconfig @@ -14,6 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dreamplug" CONFIG_IDENT_STRING="\nMarvell-DreamPlug" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x100000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y @@ -21,6 +23,7 @@ CONFIG_BOOTCOMMAND="setenv ethact ethernet-controller@72000; ${x_bootcmd_etherne CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y CONFIG_CMD_SATA=y diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig index 07d5dce51be..aeea352e258 100644 --- a/configs/ds109_defconfig +++ b/configs/ds109_defconfig @@ -18,12 +18,15 @@ CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ds109" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x3D0000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="setenv ethact egiga0; ${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;" CONFIG_USE_PREBOOT=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig index 81a767cc0ea..7af7bb4e980 100644 --- a/configs/ds414_defconfig +++ b/configs/ds414_defconfig @@ -23,6 +23,8 @@ CONFIG_DEBUG_UART_BASE=0xf1012000 CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 ip=off initrd=0x8000040,8M root=/dev/md0 rw syno_hw_version=DS414r1 ihd_num=4 netif_num=2 flash_size=8 SataLedSpecial=1 HddHotplug=1" @@ -31,7 +33,15 @@ CONFIG_BOOTCOMMAND="sf probe; sf read ${loadaddr} 0xd0000 0x2d0000; sf read ${ra # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x1bfd0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x40020000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4002c000 CONFIG_SPL_I2C=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y CONFIG_CMD_PCI=y diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig index 60910c3ce35..c737cdb4d99 100644 --- a/configs/dserve_dsrv9703c_defconfig +++ b/configs/dserve_dsrv9703c_defconfig @@ -14,7 +14,9 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/durian_defconfig b/configs/durian_defconfig index 8ce80f9d903..eccf55f895e 100644 --- a/configs/durian_defconfig +++ b/configs/durian_defconfig @@ -12,12 +12,16 @@ CONFIG_SYS_LOAD_ADDR=0x90000000 CONFIG_SYS_PCI_64BIT=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x87f00000 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 earlycon=pl011,0x28001000 root=/dev/sda2 rw" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_LAST_STAGE_INIT=y CONFIG_SYS_PROMPT="durian#" +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=280 # CONFIG_CMD_LZMADEC is not set # CONFIG_CMD_UNZIP is not set CONFIG_CMD_PCI=y diff --git a/configs/ea-lpc3250devkitv2_defconfig b/configs/ea-lpc3250devkitv2_defconfig index 51a440f29eb..d56a8387630 100644 --- a/configs/ea-lpc3250devkitv2_defconfig +++ b/configs/ea-lpc3250devkitv2_defconfig @@ -11,6 +11,8 @@ CONFIG_TARGET_EA_LPC3250DEVKITV2=y CONFIG_DEFAULT_DEVICE_TREE="lpc3250-ea3250" CONFIG_SYS_LOAD_ADDR=0x80100000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f20 CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=1048575 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set @@ -18,6 +20,8 @@ CONFIG_BOARD_SIZE_LIMIT=1048575 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="EA-LPC3250v2=> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=288 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_OF_CONTROL=y diff --git a/configs/eb_cpu5282_defconfig b/configs/eb_cpu5282_defconfig index dc649f213fa..4cf03abc61e 100644 --- a/configs/eb_cpu5282_defconfig +++ b/configs/eb_cpu5282_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_LOAD_ADDR=0x20000 CONFIG_ENV_ADDR=0xFF040000 CONFIG_TARGET_EB_CPU5282=y CONFIG_MCFTMR=y +CONFIG_SYS_BARGSIZE=1024 CONFIG_SYS_MONITOR_BASE=0xFF000400 CONFIG_BOOTDELAY=5 CONFIG_BOOT_RETRY=y @@ -16,8 +17,11 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="printenv" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="\nEB+CPU5282> " +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1054 CONFIG_CMD_IMLS=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set @@ -41,6 +45,7 @@ CONFIG_LED_STATUS_BOOT=0 CONFIG_LED_STATUS_CMD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_DM_ETH=y diff --git a/configs/eb_cpu5282_internal_defconfig b/configs/eb_cpu5282_internal_defconfig index 2f2692340f2..11785158469 100644 --- a/configs/eb_cpu5282_internal_defconfig +++ b/configs/eb_cpu5282_internal_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_LOAD_ADDR=0x20000 CONFIG_ENV_ADDR=0xFF040000 CONFIG_TARGET_EB_CPU5282=y CONFIG_MCFTMR=y +CONFIG_SYS_BARGSIZE=1024 CONFIG_SYS_MONITOR_BASE=0xF0000418 CONFIG_BOOTDELAY=5 CONFIG_BOOT_RETRY=y @@ -16,7 +17,9 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="printenv" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_CBSIZE=1024 CONFIG_CMD_IMLS=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set @@ -40,6 +43,7 @@ CONFIG_LED_STATUS_BOOT=0 CONFIG_LED_STATUS_CMD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_DM_ETH=y diff --git a/configs/edison_defconfig b/configs/edison_defconfig index a9479e54a96..dbca94525ed 100644 --- a/configs/edison_defconfig +++ b/configs/edison_defconfig @@ -14,6 +14,9 @@ CONFIG_SYS_MONITOR_BASE=0x01101000 CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=128 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_CPU=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig index 4987e094659..b8906b1bb0d 100644 --- a/configs/edminiv2_defconfig +++ b/configs/edminiv2_defconfig @@ -16,15 +16,28 @@ CONFIG_SPL=y CONFIG_IDENT_STRING=" EDMiniV2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0xFFF84000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xf40 CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0xfff0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000 +CONFIG_SPL_BSS_MAX_SIZE=0x1ffff CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x20000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x40000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1ffff CONFIG_SPL_NOR_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="EDMiniV2> " +CONFIG_SYS_PBSIZE=1051 CONFIG_CMD_IMLS=y CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y diff --git a/configs/efi-x86_app32_defconfig b/configs/efi-x86_app32_defconfig index 7a723c136c2..4ae74dbd2e3 100644 --- a/configs/efi-x86_app32_defconfig +++ b/configs/efi-x86_app32_defconfig @@ -18,6 +18,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTM is not set CONFIG_CMD_PART=y # CONFIG_CMD_NET is not set diff --git a/configs/efi-x86_app64_defconfig b/configs/efi-x86_app64_defconfig index 98f91d81164..3f1e80120c6 100644 --- a/configs/efi-x86_app64_defconfig +++ b/configs/efi-x86_app64_defconfig @@ -18,6 +18,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTM is not set CONFIG_CMD_PART=y # CONFIG_CMD_NET is not set diff --git a/configs/efi-x86_payload32_defconfig b/configs/efi-x86_payload32_defconfig index ceadd8290d0..42fb89d5b3e 100644 --- a/configs/efi-x86_payload32_defconfig +++ b/configs/efi-x86_payload32_defconfig @@ -17,6 +17,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y diff --git a/configs/efi-x86_payload64_defconfig b/configs/efi-x86_payload64_defconfig index b5d1cf12435..eef51e8efc3 100644 --- a/configs/efi-x86_payload64_defconfig +++ b/configs/efi-x86_payload64_defconfig @@ -17,6 +17,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y diff --git a/configs/elgin-rv1108_defconfig b/configs/elgin-rv1108_defconfig index 113b7c8cfe0..ff014cccb30 100644 --- a/configs/elgin-rv1108_defconfig +++ b/configs/elgin-rv1108_defconfig @@ -13,12 +13,15 @@ CONFIG_DEBUG_UART_BASE=0x10210000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x62000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x60100000 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_DEFAULT_FDT_FILE="rv1108-elgin-r1.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_CMD_GPIO=y CONFIG_RANDOM_UUID=y CONFIG_CMD_MMC=y diff --git a/configs/emlid_neutis_n5_devboard_defconfig b/configs/emlid_neutis_n5_devboard_defconfig index a3b43dffc63..d9272eae168 100644 --- a/configs/emlid_neutis_n5_devboard_defconfig +++ b/configs/emlid_neutis_n5_devboard_defconfig @@ -8,4 +8,6 @@ CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/configs/emsdp_defconfig b/configs/emsdp_defconfig index 17ca315a4ac..4c2cc348925 100644 --- a/configs/emsdp_defconfig +++ b/configs/emsdp_defconfig @@ -9,10 +9,14 @@ CONFIG_ENV_SIZE=0x1000 CONFIG_DEFAULT_DEVICE_TREE="emsdp" CONFIG_SYS_CLK_FREQ=40000000 CONFIG_SYS_LOAD_ADDR=0x10000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10100000 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="emsdp# " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=280 # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_XIMG is not set CONFIG_CMD_MMC=y diff --git a/configs/espresso7420_defconfig b/configs/espresso7420_defconfig index 533757ba5b4..9128fa086a7 100644 --- a/configs/espresso7420_defconfig +++ b/configs/espresso7420_defconfig @@ -9,6 +9,8 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="exynos7420-espresso7420" CONFIG_IDENT_STRING=" for ESPRESSO7420" CONFIG_SYS_LOAD_ADDR=0x43e00000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2158000 # CONFIG_AUTOBOOT is not set CONFIG_SILENT_CONSOLE=y CONFIG_CONSOLE_MUX=y @@ -17,6 +19,7 @@ CONFIG_CONSOLE_MUX=y # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set CONFIG_SYS_PROMPT="ESPRESSO7420 # " +CONFIG_SYS_PBSIZE=1024 # CONFIG_CMD_SETEXPR is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_MMC is not set diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig index 34b9fff5ded..294a67a7fac 100644 --- a/configs/etamin_defconfig +++ b/configs/etamin_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" @@ -35,6 +37,10 @@ CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_BSS_START_ADDR=0x80000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -47,6 +53,8 @@ CONFIG_SPL_YMODEM_SUPPORT=y # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig index 18faa1a7fb3..da8c0bd9cbe 100644 --- a/configs/ethernut5_defconfig +++ b/configs/ethernut5_defconfig @@ -22,6 +22,8 @@ CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x22000000 0xc6000 0x294000; bootm 0x2 CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_IMLS=y CONFIG_CMD_ASKENV=y diff --git a/configs/ev-imx280-nano-x-mb_defconfig b/configs/ev-imx280-nano-x-mb_defconfig index 770f05f966d..20ac5ddb332 100644 --- a/configs/ev-imx280-nano-x-mb_defconfig +++ b/configs/ev-imx280-nano-x-mb_defconfig @@ -8,6 +8,8 @@ CONFIG_DM_GPIO=y CONFIG_EV_IMX280_NANO_X_MB=y CONFIG_IMX_MODULE_FUSE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/evb-ast2500_defconfig b/configs/evb-ast2500_defconfig index 2371cc2742c..9d2c4f81c5a 100644 --- a/configs/evb-ast2500_defconfig +++ b/configs/evb-ast2500_defconfig @@ -18,6 +18,8 @@ CONFIG_PRE_CONSOLE_BUFFER=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig index f84b723bbba..38d78d51924 100644 --- a/configs/evb-ast2600_defconfig +++ b/configs/evb-ast2600_defconfig @@ -32,6 +32,7 @@ CONFIG_BOOTCOMMAND="run bootspi" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000000 @@ -40,6 +41,8 @@ CONFIG_SPL_DM_RESET=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/evb-px30_defconfig b/configs/evb-px30_defconfig index 36eaf4e6b95..c873f7c2883 100644 --- a/configs/evb-px30_defconfig +++ b/configs/evb-px30_defconfig @@ -18,6 +18,8 @@ CONFIG_DEBUG_UART_BASE=0xFF160000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x600 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y @@ -28,12 +30,20 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/px30-evb.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y # CONFIG_TPL_BANNER_PRINT is not set CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +CONFIG_TPL_MAX_SIZE=0x20000 # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMI is not set diff --git a/configs/evb-px5_defconfig b/configs/evb-px5_defconfig index 1e2b0f03087..82620159ab1 100644 --- a/configs/evb-px5_defconfig +++ b/configs/evb-px5_defconfig @@ -20,6 +20,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -32,13 +34,21 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-px5-evb.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_EARLY_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x20000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_TPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x188000 CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y CONFIG_TPL=y +CONFIG_TPL_MAX_SIZE=0x40000 CONFIG_CMD_MMC=y CONFIG_CMD_CACHE=y CONFIG_SPL_OF_CONTROL=y diff --git a/configs/evb-rk3036_defconfig b/configs/evb-rk3036_defconfig index dcc70cb0bc7..7bc535e68cf 100644 --- a/configs/evb-rk3036_defconfig +++ b/configs/evb-rk3036_defconfig @@ -17,12 +17,16 @@ CONFIG_DEBUG_UART_BASE=0x20068000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x60800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x60100000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3036-evb.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_STACK_R=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y diff --git a/configs/evb-rk3128_defconfig b/configs/evb-rk3128_defconfig index d232d78d6e5..94c32b55423 100644 --- a/configs/evb-rk3128_defconfig +++ b/configs/evb-rk3128_defconfig @@ -12,10 +12,13 @@ CONFIG_DEBUG_UART_BASE=0x20068000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x60800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x60100000 CONFIG_FIT=y CONFIG_DEFAULT_FDT_FILE="rk3128-evb.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig index 8eda765fb37..f44dec09c27 100644 --- a/configs/evb-rk3229_defconfig +++ b/configs/evb-rk3229_defconfig @@ -18,6 +18,8 @@ CONFIG_DEBUG_UART_BASE=0x11030000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x61800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x61100000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y @@ -26,10 +28,14 @@ CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3229-evb.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x100000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_SPL_OPTEE_IMAGE=y +CONFIG_TPL_MAX_SIZE=0x100000 CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_USB_MASS_STORAGE=y diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288_defconfig index 14a1d4cf332..6587c19c36a 100644 --- a/configs/evb-rk3288_defconfig +++ b/configs/evb-rk3288_defconfig @@ -15,6 +15,8 @@ CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -24,6 +26,10 @@ CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_SPL_OPTEE_IMAGE=y diff --git a/configs/evb-rk3308_defconfig b/configs/evb-rk3308_defconfig index b4ce8a1a396..eb17b3d5e1f 100644 --- a/configs/evb-rk3308_defconfig +++ b/configs/evb-rk3308_defconfig @@ -16,12 +16,21 @@ CONFIG_DEBUG_UART_BASE=0xFF0C0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_BOOTDELAY=0 CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig index 7e0c4c50a61..373aaecd16f 100644 --- a/configs/evb-rk3328_defconfig +++ b/configs/evb-rk3328_defconfig @@ -17,6 +17,8 @@ CONFIG_DEBUG_UART_BASE=0xFF130000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y @@ -25,12 +27,20 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-evb.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x2000000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_TPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_TPL_MAX_SIZE=0x40000 CONFIG_TPL_DRIVERS_MISC=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig index a9afb63fdd9..e3b7137c8f1 100644 --- a/configs/evb-rk3399_defconfig +++ b/configs/evb-rk3399_defconfig @@ -12,9 +12,18 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/evb-rk3568_defconfig b/configs/evb-rk3568_defconfig index 1d61c151943..135f48ced04 100644 --- a/configs/evb-rk3568_defconfig +++ b/configs/evb-rk3568_defconfig @@ -18,13 +18,22 @@ CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-evb.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_CMD_GPT=y diff --git a/configs/evb-rv1108_defconfig b/configs/evb-rv1108_defconfig index fcdef1d3549..88194317980 100644 --- a/configs/evb-rv1108_defconfig +++ b/configs/evb-rv1108_defconfig @@ -10,11 +10,14 @@ CONFIG_DEBUG_UART_BASE=0x10210000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x62000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x60100000 CONFIG_BOOTCOMMAND="sf probe;sf read 0x62000000 0x140800 0x500000;dcache off;go 0x62000000" CONFIG_DEFAULT_FDT_FILE="rv1108-evb.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_RANDOM_UUID=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig index 1ee3cb225bf..b2c530d3380 100644 --- a/configs/ficus-rk3399_defconfig +++ b/configs/ficus-rk3399_defconfig @@ -13,8 +13,17 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xff8e0000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff8effff CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 CONFIG_CMD_BOOTZ=y diff --git a/configs/firefly-px30_defconfig b/configs/firefly-px30_defconfig index 01858a65b4c..bef490d73a4 100644 --- a/configs/firefly-px30_defconfig +++ b/configs/firefly-px30_defconfig @@ -19,6 +19,8 @@ CONFIG_DEBUG_UART_BASE=0xFF160000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x600 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y @@ -29,12 +31,20 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/px30-firefly.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y # CONFIG_TPL_BANNER_PRINT is not set CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +CONFIG_TPL_MAX_SIZE=0x20000 # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMI is not set diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig index c0dbd8470a7..c2b3a0e315d 100644 --- a/configs/firefly-rk3288_defconfig +++ b/configs/firefly-rk3288_defconfig @@ -15,11 +15,17 @@ CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-firefly.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_CMD_GPIO=y diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig index 3803e42f380..036769c066a 100644 --- a/configs/firefly-rk3399_defconfig +++ b/configs/firefly-rk3399_defconfig @@ -12,10 +12,19 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 599eeb96b4f..7cdb6c56755 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -17,6 +17,8 @@ CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_CONS_INDEX=5 CONFIG_USB_EHCI_HCD=y diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig index 58c8bb9040b..104532bd05f 100644 --- a/configs/galileo_defconfig +++ b/configs/galileo_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/gardena-smart-gateway-at91sam_defconfig b/configs/gardena-smart-gateway-at91sam_defconfig index dd61b834a92..a253b1333ed 100644 --- a/configs/gardena-smart-gateway-at91sam_defconfig +++ b/configs/gardena-smart-gateway-at91sam_defconfig @@ -23,6 +23,8 @@ CONFIG_DEBUG_UART_BASE=0xfffff200 CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003f00 CONFIG_FIT=y CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=0 @@ -32,12 +34,24 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs rw" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SPL_MAX_SIZE=0x7000 +CONFIG_SPL_PAD_TO=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x308000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_BASE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_LICENSE=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMINFO=y diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig index 314ab9fddfd..b9ee281be9f 100644 --- a/configs/gardena-smart-gateway-mt7688_defconfig +++ b/configs/gardena-smart-gateway-mt7688_defconfig @@ -36,9 +36,16 @@ CONFIG_BOOTCOMMAND="cp.b 83000000 84000000 10000 && dhcp uEnv.txt && env import CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_BSS_START_ADDR=0x80010000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_LICENSE=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/gazerbeam_defconfig b/configs/gazerbeam_defconfig index f2f0257071c..c48541a9ec5 100644 --- a/configs/gazerbeam_defconfig +++ b/configs/gazerbeam_defconfig @@ -112,6 +112,7 @@ CONFIG_SYS_FPGA_FLAVOR_GAZERBEAM=y CONFIG_CMD_IOLOOP=y CONFIG_SYS_MEMTEST_START=0x00001000 CONFIG_SYS_MEMTEST_END=0x07e00000 +CONFIG_SYS_BARGSIZE=1024 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y @@ -130,6 +131,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=1024 CONFIG_CMD_CPU=y CONFIG_CMD_BINOP=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ge_b1x5v2_defconfig b/configs/ge_b1x5v2_defconfig index a1cf676f3f5..ff14bd625a6 100644 --- a/configs/ge_b1x5v2_defconfig +++ b/configs/ge_b1x5v2_defconfig @@ -37,12 +37,15 @@ CONFIG_LOG_MAX_LEVEL=8 CONFIG_LOG_DEFAULT_LEVEL=4 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400 CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig index 8cfe772f4ed..c9e4ee8f93d 100644 --- a/configs/ge_bx50v3_defconfig +++ b/configs/ge_bx50v3_defconfig @@ -23,6 +23,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/geekbox_defconfig b/configs/geekbox_defconfig index 8287600e0ba..b2cade74103 100644 --- a/configs/geekbox_defconfig +++ b/configs/geekbox_defconfig @@ -12,9 +12,13 @@ CONFIG_DEBUG_UART_BASE=0xFF690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-geekbox.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_REGMAP=y CONFIG_SYSCON=y diff --git a/configs/giedi_defconfig b/configs/giedi_defconfig index 4fbf7ebdcd9..7e9a7ea7c0b 100644 --- a/configs/giedi_defconfig +++ b/configs/giedi_defconfig @@ -22,6 +22,8 @@ CONFIG_IDENT_STRING=" ##v01.07" CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg" CONFIG_SYS_LOAD_ADDR=0x80280000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y @@ -34,14 +36,27 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x128000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x13e000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x3000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2073 CONFIG_CMD_CPU=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig index 3d5fd830ebe..cdd71b36ddb 100644 --- a/configs/goflexhome_defconfig +++ b/configs/goflexhome_defconfig @@ -13,6 +13,8 @@ CONFIG_ENV_OFFSET=0xC0000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-goflexnet" CONFIG_IDENT_STRING="\nSeagate GoFlex Home" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y @@ -21,6 +23,8 @@ CONFIG_USE_PREBOOT=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="GoFlexHome> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1053 # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y CONFIG_CMD_SATA=y diff --git a/configs/gose_defconfig b/configs/gose_defconfig index a81dacdcaba..350c4ec3f0e 100644 --- a/configs/gose_defconfig +++ b/configs/gose_defconfig @@ -26,16 +26,24 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x50000000 CONFIG_ENV_ADDR=0xC0000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4f000000 CONFIG_FIT=y CONFIG_BOOTDELAY=3 +CONFIG_SPL_MAX_SIZE=0x4000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6340000 CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=256 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/grpeach_defconfig b/configs/grpeach_defconfig index fb5b90f32b4..f706ee3dfbe 100644 --- a/configs/grpeach_defconfig +++ b/configs/grpeach_defconfig @@ -13,12 +13,16 @@ CONFIG_DEFAULT_DEVICE_TREE="r7s72100-gr-peach-u-boot" CONFIG_RZA1=y CONFIG_SYS_CLK_FREQ=66666666 CONFIG_SYS_LOAD_ADDR=0x20400000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20900000 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="ignore_loglevel" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_BOARD_EARLY_INIT_F is not set CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=256 # CONFIG_CMD_ELF is not set CONFIG_CMD_GPIO=y CONFIG_CMD_USB=y diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig index 1a5fe06bbe1..c81f0f6c5eb 100644 --- a/configs/gt90h_v4_defconfig +++ b/configs/gt90h_v4_defconfig @@ -16,6 +16,8 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_CONS_INDEX=5 CONFIG_USB_MUSB_HOST=y diff --git a/configs/gurnard_defconfig b/configs/gurnard_defconfig index e353b64e517..01546de8fda 100644 --- a/configs/gurnard_defconfig +++ b/configs/gurnard_defconfig @@ -18,6 +18,8 @@ CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index 89d78cfc175..02c59c3f31d 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -12,6 +12,8 @@ CONFIG_ENV_OFFSET=0xE0000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-guruplug-server-plus" CONFIG_IDENT_STRING="\nMarvell-GuruPlug" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=917504 @@ -22,6 +24,7 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index 28a73fb304b..0effee6d30f 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -41,15 +41,21 @@ CONFIG_MISC_INIT_R=y CONFIG_PCI_INIT_R=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x100 CONFIG_SPL_POWER=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Ventana > " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=539 CONFIG_CMD_BOOTZ=y CONFIG_CMD_SPL_WRITE_SIZE=0x20000 CONFIG_CMD_UNZIP=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index 9deb080ca23..28e08788b65 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -41,15 +41,21 @@ CONFIG_MISC_INIT_R=y CONFIG_PCI_INIT_R=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x100 CONFIG_SPL_POWER=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Ventana > " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=539 CONFIG_CMD_BOOTZ=y CONFIG_CMD_SPL_WRITE_SIZE=0x20000 CONFIG_CMD_UNZIP=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 8ef794c21e4..f46440bf560 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -41,16 +41,23 @@ CONFIG_MISC_INIT_R=y CONFIG_PCI_INIT_R=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x1200000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x100 CONFIG_SPL_POWER=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Ventana > " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=539 CONFIG_CMD_BOOTZ=y CONFIG_CMD_SPL_NAND_OFS=0x1100000 CONFIG_CMD_SPL_WRITE_SIZE=0x20000 diff --git a/configs/h8_homlet_v2_defconfig b/configs/h8_homlet_v2_defconfig index 29f965200e1..8af0b3c3332 100644 --- a/configs/h8_homlet_v2_defconfig +++ b/configs/h8_homlet_v2_defconfig @@ -11,6 +11,8 @@ CONFIG_USB1_VBUS_PIN="PL6" CONFIG_AXP_GPIO=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO4_VOLT=3300 CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index 9763b21a34b..647b4674891 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -12,7 +12,17 @@ CONFIG_TARGET_HARMONY=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (Harmony) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2085 # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig index 4dc9e3bc58d..2a1db65d1bf 100644 --- a/configs/helios4_defconfig +++ b/configs/helios4_defconfig @@ -19,12 +19,22 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_BOOTDELAY=3 CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x22fd0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x40023000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4002c000 CONFIG_SPL_I2C=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_TLV_EEPROM=y CONFIG_SPL_CMD_TLV_EEPROM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig index 746f127f0f4..8a7d0fd8a9f 100644 --- a/configs/highbank_defconfig +++ b/configs/highbank_defconfig @@ -14,6 +14,8 @@ CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0xFFF88000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000000 CONFIG_FIT=y CONFIG_OF_BOARD_SETUP=y CONFIG_AUTOBOOT_KEYED=y diff --git a/configs/hihope_rzg2_defconfig b/configs/hihope_rzg2_defconfig index 3e1077389c2..8bf14e09d47 100644 --- a/configs/hihope_rzg2_defconfig +++ b/configs/hihope_rzg2_defconfig @@ -20,7 +20,10 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a774a1-hihope-rzg2m.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a774a1-hihope-rzg2m.dtb" # CONFIG_BOARD_EARLY_INIT_F is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/hikey960_defconfig b/configs/hikey960_defconfig index 627daa1fb83..0e7f264a2e3 100644 --- a/configs/hikey960_defconfig +++ b/configs/hikey960_defconfig @@ -9,6 +9,8 @@ CONFIG_DEFAULT_DEVICE_TREE="hi3660-hikey960" CONFIG_IDENT_STRING="\nHikey960" CONFIG_SYS_LOAD_ADDR=0x80000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7fff0 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA6,115200n8 root=/dev/mmcblk0p2 rw" @@ -17,6 +19,8 @@ CONFIG_BOOTARGS="console=ttyAMA6,115200n8 root=/dev/mmcblk0p2 rw" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y CONFIG_SYS_PROMPT="U-Boot => " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=283 CONFIG_CMD_MD5SUM=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_GPT=y diff --git a/configs/hikey_defconfig b/configs/hikey_defconfig index 6f33bba1eb6..84242e87848 100644 --- a/configs/hikey_defconfig +++ b/configs/hikey_defconfig @@ -9,6 +9,8 @@ CONFIG_DEFAULT_DEVICE_TREE="hi6220-hikey" CONFIG_IDENT_STRING="hikey" CONFIG_SYS_LOAD_ADDR=0x80000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7fff0 CONFIG_REMAKE_ELF=y CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y @@ -17,6 +19,9 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/hsdk_4xd_defconfig b/configs/hsdk_4xd_defconfig index b043982e360..85844f7ec88 100644 --- a/configs/hsdk_4xd_defconfig +++ b/configs/hsdk_4xd_defconfig @@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_CLOCK=33333333 CONFIG_SYS_CLK_FREQ=500000000 CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_BOARD_EARLY_INIT_F=y @@ -19,6 +21,8 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="hsdk-4xd# " +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2075 CONFIG_CMD_ENV_FLAGS=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y diff --git a/configs/hsdk_defconfig b/configs/hsdk_defconfig index ce8f72d6934..a714d28134b 100644 --- a/configs/hsdk_defconfig +++ b/configs/hsdk_defconfig @@ -11,6 +11,8 @@ CONFIG_DEBUG_UART_CLOCK=33333333 CONFIG_SYS_CLK_FREQ=500000000 CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_BOARD_EARLY_INIT_F=y @@ -18,6 +20,8 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="hsdk# " +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2071 CONFIG_CMD_ENV_FLAGS=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y diff --git a/configs/huawei_hg556a_ram_defconfig b/configs/huawei_hg556a_ram_defconfig index fcded41eac5..1c43ae262d8 100644 --- a/configs/huawei_hg556a_ram_defconfig +++ b/configs/huawei_hg556a_ram_defconfig @@ -17,8 +17,12 @@ CONFIG_MIPS_BOOT_FDT=y CONFIG_REMAKE_ELF=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="HG556a # " +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=538 CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y # CONFIG_CMD_BOOTD is not set diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index 257dd89af45..29cea180201 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -7,7 +7,9 @@ CONFIG_DRAM_CLK=384 CONFIG_MACPWR="PH21" CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index 436e3a8c209..8b6936497fd 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -14,7 +14,9 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index 6978f8b0aab..a05876a18f3 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -14,7 +14,9 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig index 2c8ecb51de0..3a9f30877b0 100644 --- a/configs/iNet_86VS_defconfig +++ b/configs/iNet_86VS_defconfig @@ -13,7 +13,9 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/iNet_D978_rev2_defconfig b/configs/iNet_D978_rev2_defconfig index 9a90252dbd7..664745c9f13 100644 --- a/configs/iNet_D978_rev2_defconfig +++ b/configs/iNet_D978_rev2_defconfig @@ -17,6 +17,8 @@ CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_CONS_INDEX=5 diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig index 61c5649f096..3d4bd5145ff 100644 --- a/configs/ib62x0_defconfig +++ b/configs/ib62x0_defconfig @@ -12,6 +12,8 @@ CONFIG_ENV_OFFSET=0xE0000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ib62x0" CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y @@ -20,6 +22,8 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ib62x0 => " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1051 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y diff --git a/configs/icnova-a20-swac_defconfig b/configs/icnova-a20-swac_defconfig index de766b226bb..afe5b28e66b 100644 --- a/configs/icnova-a20-swac_defconfig +++ b/configs/icnova-a20-swac_defconfig @@ -19,7 +19,9 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo CONFIG_VIDEO_LCD_POWER="PH22" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_UNZIP=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig index 193160f8087..644d0abd3aa 100644 --- a/configs/iconnect_defconfig +++ b/configs/iconnect_defconfig @@ -13,6 +13,8 @@ CONFIG_ENV_OFFSET=0x80000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-iconnect" CONFIG_IDENT_STRING=" Iomega iConnect" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y @@ -22,6 +24,8 @@ CONFIG_USE_PREBOOT=y CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="iConnect> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1051 # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y CONFIG_CMD_PCI=y diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index 7415b1158c6..b8070e7351a 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -119,6 +119,7 @@ CONFIG_ACR_PIPE_DEP_4=y CONFIG_ACR_RPTCNT_4=y CONFIG_LCRR_EADC_1=y CONFIG_LCRR_CLKDIV_2=y +CONFIG_SYS_BARGSIZE=1024 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_LEGACY_IMAGE_FORMAT=y @@ -140,6 +141,7 @@ CONFIG_PREBOOT="echo;echo Type \"run nfsboot\" to mount root filesystem over NFS CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_CBSIZE=1024 CONFIG_CMD_IMLS=y CONFIG_CMD_ENV_FLAGS=y CONFIG_CMD_I2C=y diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig index f0d6ac56b6a..00f0a670c2b 100644 --- a/configs/igep00x0_defconfig +++ b/configs/igep00x0_defconfig @@ -9,13 +9,18 @@ CONFIG_SPL_TEXT_BASE=0x40200000 CONFIG_TARGET_OMAP3_IGEP00X0=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00 CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SPL_FS_EXT4 is not set CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y @@ -36,8 +41,13 @@ CONFIG_SPL_UBI_LOAD_KERNEL_ID=3 CONFIG_SPL_UBI_LOAD_ARGS_ID=4 CONFIG_SPL_ONENAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_SPL=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y diff --git a/configs/imgtec_xilfpga_defconfig b/configs/imgtec_xilfpga_defconfig index cc79f99330a..51c7e500dc2 100644 --- a/configs/imgtec_xilfpga_defconfig +++ b/configs/imgtec_xilfpga_defconfig @@ -10,6 +10,8 @@ CONFIG_MIPS_CACHE_SETUP=y CONFIG_MIPS_CACHE_DISABLE=y # CONFIG_MIPS_BOOT_ENV_LEGACY is not set CONFIG_MIPS_BOOT_FDT=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x87fff000 CONFIG_TIMESTAMP=y CONFIG_BOOTDELAY=5 # CONFIG_DISPLAY_BOARDINFO is not set @@ -17,6 +19,7 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="MIPSfpga # " +CONFIG_SYS_PBSIZE=1052 # CONFIG_CMD_SAVEENV is not set CONFIG_CMD_MEMINFO=y CONFIG_CMD_DHCP=y diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig index 63d6101bb89..1537e8361f6 100644 --- a/configs/imx28_xea_defconfig +++ b/configs/imx28_xea_defconfig @@ -32,9 +32,12 @@ CONFIG_BOOTCOMMAND="run ${bootpri} ; run ${bootsec}" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run prebootcmd" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x20000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x0 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y @@ -42,12 +45,16 @@ CONFIG_SPL_DMA=y CONFIG_SPL_MMC_TINY=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x44000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x800 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x400 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x40 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/configs/imx28_xea_sb_defconfig b/configs/imx28_xea_sb_defconfig index 97c7db04e12..ad478c469bc 100644 --- a/configs/imx28_xea_sb_defconfig +++ b/configs/imx28_xea_sb_defconfig @@ -24,6 +24,7 @@ CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run prebootcmd" CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y @@ -32,8 +33,8 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y CONFIG_SPL_DMA=y CONFIG_SPL_DM_SPI_FLASH=y -CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/configs/imx6dl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig index 0d7f8930144..71e3d39597d 100644 --- a/configs/imx6dl_icore_nand_defconfig +++ b/configs/imx6dl_icore_nand_defconfig @@ -24,11 +24,14 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=541 CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/imx6dl_mamoj_defconfig b/configs/imx6dl_mamoj_defconfig index f869539c0ce..86692174712 100644 --- a/configs/imx6dl_mamoj_defconfig +++ b/configs/imx6dl_mamoj_defconfig @@ -17,9 +17,15 @@ CONFIG_SYS_MEMTEST_END=0x88000000 CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x13000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x10 +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_SPL=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y diff --git a/configs/imx6q_bosch_acc_defconfig b/configs/imx6q_bosch_acc_defconfig index 4b75e5794e9..a2501ebc1a1 100644 --- a/configs/imx6q_bosch_acc_defconfig +++ b/configs/imx6q_bosch_acc_defconfig @@ -34,6 +34,7 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run mmc_mmc_fit" CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_RAW_IMAGE_SUPPORT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xaa # CONFIG_SPL_CRC32 is not set # CONFIG_SPL_CRYPTO is not set diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig index 67c5640cc1e..bf5f620ad88 100644 --- a/configs/imx6q_icore_nand_defconfig +++ b/configs/imx6q_icore_nand_defconfig @@ -25,11 +25,14 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=541 CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index 560733e6b21..1510d10dc52 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -27,18 +27,26 @@ CONFIG_BOOTCOMMAND="run autoboot" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SPL_RAW_IMAGE_SUPPORT=y +CONFIG_SYS_SPL_MALLOC=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_DMA=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x500000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x800 CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="i.MX6 Logic # " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=543 CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x1500000 CONFIG_CMD_SPL_WRITE_SIZE=0x00100000 diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig index 4f7cc6c6aad..bddc4ff98ef 100644 --- a/configs/imx6qdl_icore_mipi_defconfig +++ b/configs/imx6qdl_icore_mipi_defconfig @@ -33,12 +33,18 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x10 CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl-mipi> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=546 CONFIG_CMD_SPL=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index 96f4603a260..f8194a002a1 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -36,12 +36,18 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x10 CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=541 CONFIG_CMD_SPL=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig index 67c5640cc1e..bf5f620ad88 100644 --- a/configs/imx6qdl_icore_nand_defconfig +++ b/configs/imx6qdl_icore_nand_defconfig @@ -25,11 +25,14 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=541 CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig index 7a0f932936d..cb2b0df98b7 100644 --- a/configs/imx6qdl_icore_rqs_defconfig +++ b/configs/imx6qdl_icore_rqs_defconfig @@ -30,12 +30,18 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x10 CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl-rqs> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=545 CONFIG_CMD_SPL=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y diff --git a/configs/imx6ul_geam_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig index 4b606f69867..9e46b1137fc 100644 --- a/configs/imx6ul_geam_mmc_defconfig +++ b/configs/imx6ul_geam_mmc_defconfig @@ -28,9 +28,12 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="geam6ul> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=538 CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig index b3b13db5c4a..ac56f204cdb 100644 --- a/configs/imx6ul_geam_nand_defconfig +++ b/configs/imx6ul_geam_nand_defconfig @@ -25,11 +25,14 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="geam6ul> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=538 CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig index 4fff94b957e..7dadf80cd5a 100644 --- a/configs/imx6ul_isiot_emmc_defconfig +++ b/configs/imx6ul_isiot_emmc_defconfig @@ -28,9 +28,12 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="isiotmx6ul> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=541 CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig index 726a387acde..a5828ead1bd 100644 --- a/configs/imx6ul_isiot_nand_defconfig +++ b/configs/imx6ul_isiot_nand_defconfig @@ -25,11 +25,14 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="isiotmx6ul> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=541 CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/imx7_cm_defconfig b/configs/imx7_cm_defconfig index c22c4d570d4..830e4029e50 100644 --- a/configs/imx7_cm_defconfig +++ b/configs/imx7_cm_defconfig @@ -24,10 +24,16 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTCOMMAND="run boot${boot-mode}" CONFIG_DEFAULT_FDT_FILE="ask" # CONFIG_BOARD_EARLY_INIT_F is not set +CONFIG_SPL_MAX_SIZE=0xe000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_IMI is not set diff --git a/configs/imx8mm-cl-iot-gate-optee_defconfig b/configs/imx8mm-cl-iot-gate-optee_defconfig index 8b3d1b3ef1a..57ecd7bb3b6 100644 --- a/configs/imx8mm-cl-iot-gate-optee_defconfig +++ b/configs/imx8mm-cl-iot-gate-optee_defconfig @@ -23,13 +23,26 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x920000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_EEPROM=y diff --git a/configs/imx8mm-cl-iot-gate_defconfig b/configs/imx8mm-cl-iot-gate_defconfig index b418e86248f..67f7576f996 100644 --- a/configs/imx8mm-cl-iot-gate_defconfig +++ b/configs/imx8mm-cl-iot-gate_defconfig @@ -25,13 +25,26 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x920000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_EEPROM=y diff --git a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig index 535ff6dcba5..c95ff3e74fb 100644 --- a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig +++ b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig @@ -23,11 +23,24 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-ctouch2.dtb" +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x920000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_POWER=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set # CONFIG_CMD_CRC32 is not set diff --git a/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig b/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig index 101d5a00bc7..62d23949969 100644 --- a/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig +++ b/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig @@ -23,11 +23,24 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="imx8mm-icore-mx8mm-edimm2.2.dtb" +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x920000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_POWER=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set # CONFIG_CMD_CRC32 is not set diff --git a/configs/imx8mm-mx8menlo_defconfig b/configs/imx8mm-mx8menlo_defconfig index a4164951de0..ec672f8764e 100644 --- a/configs/imx8mm-mx8menlo_defconfig +++ b/configs/imx8mm-mx8menlo_defconfig @@ -34,13 +34,26 @@ CONFIG_LOG=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x920000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="Verdin iMX8MM # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2081 # CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_EXPORTENV is not set diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig index 9cd8ac97285..417ece1ef8c 100644 --- a/configs/imx8mm_beacon_defconfig +++ b/configs/imx8mm_beacon_defconfig @@ -25,7 +25,17 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi;" CONFIG_DEFAULT_FDT_FILE="imx8mm-beacon-kit.dtb" +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x920000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y @@ -33,6 +43,9 @@ CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set # CONFIG_CMD_CRC32 is not set diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig index d55efa6d00e..399b388460f 100644 --- a/configs/imx8mm_data_modul_edm_sbc_defconfig +++ b/configs/imx8mm_data_modul_edm_sbc_defconfig @@ -41,9 +41,19 @@ CONFIG_CONSOLE_MUX=y CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_LEGACY_IMAGE_FORMAT=y CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x920000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y @@ -54,6 +64,9 @@ CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig index ec3206bd640..00af724bbaa 100644 --- a/configs/imx8mm_evk_defconfig +++ b/configs/imx8mm_evk_defconfig @@ -23,13 +23,26 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x920000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set # CONFIG_CMD_CRC32 is not set diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig index 0165a4e5df0..190209d6325 100644 --- a/configs/imx8mm_venice_defconfig +++ b/configs/imx8mm_venice_defconfig @@ -31,12 +31,24 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="gsc wd-disable" CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x920000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set CONFIG_CRC32_VERIFY=y diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig index 145f96d491d..5b9b3715b34 100644 --- a/configs/imx8mn_beacon_2g_defconfig +++ b/configs/imx8mn_beacon_2g_defconfig @@ -32,14 +32,27 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb" CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x95e000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x187ff0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig index 9052e68e967..b296898d6db 100644 --- a/configs/imx8mn_beacon_defconfig +++ b/configs/imx8mn_beacon_defconfig @@ -31,8 +31,18 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb" CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x95e000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x187ff0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y @@ -40,6 +50,9 @@ CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig index 49f42530015..68c2940456d 100644 --- a/configs/imx8mn_bsh_smm_s2_defconfig +++ b/configs/imx8mn_bsh_smm_s2_defconfig @@ -26,8 +26,18 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="freescale/imx8mn-bsh-smm-s2.dtb" CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x950000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x980000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y @@ -35,6 +45,9 @@ CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2067 CONFIG_CMD_FUSE=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y diff --git a/configs/imx8mn_bsh_smm_s2pro_defconfig b/configs/imx8mn_bsh_smm_s2pro_defconfig index 52661ec1689..4bc55121051 100644 --- a/configs/imx8mn_bsh_smm_s2pro_defconfig +++ b/configs/imx8mn_bsh_smm_s2pro_defconfig @@ -27,14 +27,27 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="freescale/imx8mn-bsh-smm-s2pro.dtb" CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x950000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x980000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2067 CONFIG_CMD_FUSE=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig index bc1cfa4bbd5..e16c1f60e67 100644 --- a/configs/imx8mn_ddr4_evk_defconfig +++ b/configs/imx8mn_ddr4_evk_defconfig @@ -25,13 +25,26 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="imx8mn-ddr4-evk.dtb" CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x950000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x980000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set CONFIG_CMD_ERASEENV=y diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig index c18c19fa140..56145a1b6d4 100644 --- a/configs/imx8mn_evk_defconfig +++ b/configs/imx8mn_evk_defconfig @@ -26,17 +26,30 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="imx8mn-evk.dtb" CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x950000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_LEGACY_IMAGE_FORMAT=y CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x980000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set CONFIG_CMD_ERASEENV=y diff --git a/configs/imx8mn_var_som_defconfig b/configs/imx8mn_var_som_defconfig index 5ec82f2a926..898f3f2f9f6 100644 --- a/configs/imx8mn_var_som_defconfig +++ b/configs/imx8mn_var_som_defconfig @@ -27,14 +27,27 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="freescale/imx8mn-var-som-symphony.dtb" CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x950000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x980000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2067 CONFIG_CMD_FUSE=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/imx8mn_venice_defconfig b/configs/imx8mn_venice_defconfig index 63a65497371..4a0bf393986 100644 --- a/configs/imx8mn_venice_defconfig +++ b/configs/imx8mn_venice_defconfig @@ -32,12 +32,25 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="gsc wd-disable" CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x950000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x980000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set CONFIG_CRC32_VERIFY=y diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig index 2764152a919..3a41767c156 100644 --- a/configs/imx8mp_dhcom_pdk2_defconfig +++ b/configs/imx8mp_dhcom_pdk2_defconfig @@ -45,8 +45,18 @@ CONFIG_CONSOLE_MUX=y CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x96fc00 +CONFIG_SPL_BSS_MAX_SIZE=0x400 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x96fc00 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x4c000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y @@ -54,6 +64,9 @@ CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2081 # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig index c3ffed85998..2b2a025c2b2 100644 --- a/configs/imx8mp_evk_defconfig +++ b/configs/imx8mp_evk_defconfig @@ -28,15 +28,28 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="imx8mp-evk.dtb" CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x26000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x98fc00 +CONFIG_SPL_BSS_MAX_SIZE=0x400 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x960000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set # CONFIG_CMD_CRC32 is not set diff --git a/configs/imx8mp_rsb3720a1_4G_defconfig b/configs/imx8mp_rsb3720a1_4G_defconfig index 323a7eacdca..97925196a85 100644 --- a/configs/imx8mp_rsb3720a1_4G_defconfig +++ b/configs/imx8mp_rsb3720a1_4G_defconfig @@ -34,15 +34,28 @@ CONFIG_DEFAULT_FDT_FILE="imx8mp-rsb3720-a1.dtb" CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x26000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x98fc00 +CONFIG_SPL_BSS_MAX_SIZE=0x400 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x960000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_ERASEENV=y CONFIG_CMD_NVEDIT_EFI=y diff --git a/configs/imx8mp_rsb3720a1_6G_defconfig b/configs/imx8mp_rsb3720a1_6G_defconfig index 3feb6396d5f..df35dcbb762 100644 --- a/configs/imx8mp_rsb3720a1_6G_defconfig +++ b/configs/imx8mp_rsb3720a1_6G_defconfig @@ -34,15 +34,28 @@ CONFIG_DEFAULT_FDT_FILE="imx8mp-rsb3720-a1.dtb" CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x26000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x98fc00 +CONFIG_SPL_BSS_MAX_SIZE=0x400 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x960000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_ERASEENV=y CONFIG_CMD_NVEDIT_EFI=y diff --git a/configs/imx8mp_venice_defconfig b/configs/imx8mp_venice_defconfig index 6758cd251e6..cef5f26d0ba 100644 --- a/configs/imx8mp_venice_defconfig +++ b/configs/imx8mp_venice_defconfig @@ -32,12 +32,25 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="gsc wd-disable" CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x26000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x98fc00 +CONFIG_SPL_BSS_MAX_SIZE=0x400 CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x960000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set CONFIG_CRC32_VERIFY=y diff --git a/configs/imx8mq_cm_defconfig b/configs/imx8mq_cm_defconfig index 8e024604378..cd1ee4d9e70 100644 --- a/configs/imx8mq_cm_defconfig +++ b/configs/imx8mq_cm_defconfig @@ -27,11 +27,23 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x180000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x187ff0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig index 9f54a280d9b..4747bff6274 100644 --- a/configs/imx8mq_evk_defconfig +++ b/configs/imx8mq_evk_defconfig @@ -29,13 +29,25 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x180000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x187ff0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1050 # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set diff --git a/configs/imx8mq_phanbell_defconfig b/configs/imx8mq_phanbell_defconfig index 095e42e6ba1..2c566e068fd 100644 --- a/configs/imx8mq_phanbell_defconfig +++ b/configs/imx8mq_phanbell_defconfig @@ -31,12 +31,23 @@ CONFIG_SD_BOOT=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x2b000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x180000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x187ff0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig index 2e42872f843..89e289a3b9e 100644 --- a/configs/imx8qm_mek_defconfig +++ b/configs/imx8qm_mek_defconfig @@ -20,6 +20,8 @@ CONFIG_SPL=y CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qm_mek/uboot-container.cfg" CONFIG_SYS_LOAD_ADDR=0x80280000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y @@ -28,13 +30,25 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if test ${sec_boot} = yes; then if run loadcntr; then run mmcboot; else run netboot; fi; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x128000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x13e000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x3000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_CPU=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set diff --git a/configs/imx8qm_rom7720_a1_4G_defconfig b/configs/imx8qm_rom7720_a1_4G_defconfig index d9997cfa828..5e32568ef19 100644 --- a/configs/imx8qm_rom7720_a1_4G_defconfig +++ b/configs/imx8qm_rom7720_a1_4G_defconfig @@ -16,6 +16,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x80280000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y @@ -25,10 +27,16 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x128000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_POWER_DOMAIN=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_CPU=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_IMPORTENV is not set diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig index 43f42f7a58a..5c361780267 100644 --- a/configs/imx8qxp_mek_defconfig +++ b/configs/imx8qxp_mek_defconfig @@ -20,6 +20,8 @@ CONFIG_SPL=y CONFIG_SPL_LOAD_IMX_CONTAINER=y CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qxp_mek/uboot-container.cfg" CONFIG_SYS_LOAD_ADDR=0x80280000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y @@ -28,12 +30,25 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if test ${sec_boot} = yes; then if run loadcntr; then run mmcboot; else run netboot; fi; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_LOG=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x128000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x13e000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x3000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SPL_POWER_DOMAIN=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_CPU=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set diff --git a/configs/imx8ulp_evk_defconfig b/configs/imx8ulp_evk_defconfig index f47c8016611..d885206a472 100644 --- a/configs/imx8ulp_evk_defconfig +++ b/configs/imx8ulp_evk_defconfig @@ -27,11 +27,24 @@ CONFIG_BOOTCOMMAND="run distro_bootcmd;run bsp_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx8ulp-evk" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x22048000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x22050000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x22040000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x8000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_MEMTEST=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y diff --git a/configs/imxrt1020-evk_defconfig b/configs/imxrt1020-evk_defconfig index 3c490bf6b23..6cf12d5ef45 100644 --- a/configs/imxrt1020-evk_defconfig +++ b/configs/imxrt1020-evk_defconfig @@ -18,15 +18,20 @@ CONFIG_SPL_SIZE_LIMIT=0x20000 CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x20209000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20240000 CONFIG_SD_BOOT=y # CONFIG_USE_BOOTCOMMAND is not set # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100 # CONFIG_SPL_CRC32 is not set +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/imxrt1050-evk_defconfig b/configs/imxrt1050-evk_defconfig index 7193e937552..9e756386e9b 100644 --- a/configs/imxrt1050-evk_defconfig +++ b/configs/imxrt1050-evk_defconfig @@ -20,16 +20,21 @@ CONFIG_SPL_SIZE_LIMIT=0x20000 CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x20209000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20280000 CONFIG_SD_BOOT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100 # CONFIG_SPL_CRC32 is not set +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig index f81120b1197..dae6b23a936 100644 --- a/configs/inet1_defconfig +++ b/configs/inet1_defconfig @@ -14,7 +14,9 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/inet86dz_defconfig b/configs/inet86dz_defconfig index 3ade9fea824..0382a4a0541 100644 --- a/configs/inet86dz_defconfig +++ b/configs/inet86dz_defconfig @@ -16,6 +16,8 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_CONS_INDEX=5 CONFIG_USB_MUSB_HOST=y diff --git a/configs/inet97fv2_defconfig b/configs/inet97fv2_defconfig index d5d2dc32c93..f3e374c2e34 100644 --- a/configs/inet97fv2_defconfig +++ b/configs/inet97fv2_defconfig @@ -13,7 +13,9 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/inet98v_rev2_defconfig b/configs/inet98v_rev2_defconfig index bd6c45bd661..c392fc2bb87 100644 --- a/configs/inet98v_rev2_defconfig +++ b/configs/inet98v_rev2_defconfig @@ -15,7 +15,9 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/inet9f_rev03_defconfig b/configs/inet9f_rev03_defconfig index 4485f930236..81a1c9940fd 100644 --- a/configs/inet9f_rev03_defconfig +++ b/configs/inet9f_rev03_defconfig @@ -13,7 +13,9 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/inet_q972_defconfig b/configs/inet_q972_defconfig index 1769256b7d1..a4a828c70a3 100644 --- a/configs/inet_q972_defconfig +++ b/configs/inet_q972_defconfig @@ -15,6 +15,8 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_BL_EN="PA25" CONFIG_VIDEO_LCD_BL_PWM="PH13" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig index 2b41fc1ba19..908e50dab13 100644 --- a/configs/inetspace_v2_defconfig +++ b/configs/inetspace_v2_defconfig @@ -14,6 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-is2" CONFIG_IDENT_STRING=" IS v2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -27,6 +29,8 @@ CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1046 CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 CONFIG_CMD_I2C=y diff --git a/configs/integratorap_cm720t_defconfig b/configs/integratorap_cm720t_defconfig index c33ef94d2c9..5f4ec5ff8f0 100644 --- a/configs/integratorap_cm720t_defconfig +++ b/configs/integratorap_cm720t_defconfig @@ -7,6 +7,8 @@ CONFIG_CM720T=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x8000 CONFIG_SYS_LOAD_ADDR=0x7fc0 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff20 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty" CONFIG_USE_BOOTCOMMAND=y @@ -17,6 +19,8 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="Integrator-AP # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=289 CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorap_cm920t_defconfig b/configs/integratorap_cm920t_defconfig index a3e6b8d8e8e..fb86b7cf299 100644 --- a/configs/integratorap_cm920t_defconfig +++ b/configs/integratorap_cm920t_defconfig @@ -7,6 +7,8 @@ CONFIG_CM920T=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x8000 CONFIG_SYS_LOAD_ADDR=0x7fc0 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff20 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty" CONFIG_USE_BOOTCOMMAND=y @@ -17,6 +19,8 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="Integrator-AP # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=289 CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorap_cm926ejs_defconfig b/configs/integratorap_cm926ejs_defconfig index af0d73b4f87..6bf08cd13ae 100644 --- a/configs/integratorap_cm926ejs_defconfig +++ b/configs/integratorap_cm926ejs_defconfig @@ -7,6 +7,8 @@ CONFIG_CM926EJ_S=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x8000 CONFIG_SYS_LOAD_ADDR=0x7fc0 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff20 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty" CONFIG_USE_BOOTCOMMAND=y @@ -17,6 +19,8 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="Integrator-AP # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=289 CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorap_cm946es_defconfig b/configs/integratorap_cm946es_defconfig index 52846913b69..97c44f36955 100644 --- a/configs/integratorap_cm946es_defconfig +++ b/configs/integratorap_cm946es_defconfig @@ -7,6 +7,8 @@ CONFIG_CM946ES=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x8000 CONFIG_SYS_LOAD_ADDR=0x7fc0 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff20 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty" CONFIG_USE_BOOTCOMMAND=y @@ -17,6 +19,8 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="Integrator-AP # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=289 CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorcp_cm1136_defconfig b/configs/integratorcp_cm1136_defconfig index 8bafa694db4..89cfa9b9a6f 100644 --- a/configs/integratorcp_cm1136_defconfig +++ b/configs/integratorcp_cm1136_defconfig @@ -9,6 +9,8 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_SYS_LOAD_ADDR=0x7fc0 CONFIG_ENV_ADDR=0x24F00000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff20 CONFIG_SYS_MONITOR_BASE=0x27F40000 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" @@ -21,6 +23,8 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="Integrator-CP # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=289 CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorcp_cm920t_defconfig b/configs/integratorcp_cm920t_defconfig index 59bee63e613..d895ba46292 100644 --- a/configs/integratorcp_cm920t_defconfig +++ b/configs/integratorcp_cm920t_defconfig @@ -9,6 +9,8 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_SYS_LOAD_ADDR=0x7fc0 CONFIG_ENV_ADDR=0x24F00000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff20 CONFIG_SYS_MONITOR_BASE=0x27F40000 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" @@ -21,6 +23,8 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="Integrator-CP # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=289 CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorcp_cm926ejs_defconfig b/configs/integratorcp_cm926ejs_defconfig index e4c91956651..9cf449cb4c8 100644 --- a/configs/integratorcp_cm926ejs_defconfig +++ b/configs/integratorcp_cm926ejs_defconfig @@ -9,6 +9,8 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_SYS_LOAD_ADDR=0x7fc0 CONFIG_ENV_ADDR=0x24F00000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff20 CONFIG_SYS_MONITOR_BASE=0x27F40000 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" @@ -21,6 +23,8 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="Integrator-CP # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=289 CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorcp_cm946es_defconfig b/configs/integratorcp_cm946es_defconfig index d228c8ad554..bcbcde21128 100644 --- a/configs/integratorcp_cm946es_defconfig +++ b/configs/integratorcp_cm946es_defconfig @@ -9,6 +9,8 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_SYS_LOAD_ADDR=0x7fc0 CONFIG_ENV_ADDR=0x24F00000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff20 CONFIG_SYS_MONITOR_BASE=0x27F40000 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" @@ -21,6 +23,8 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="Integrator-CP # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=289 CONFIG_CMD_IMLS=y CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/iot2050_defconfig b/configs/iot2050_defconfig index 175ec70915d..b50b5d09382 100644 --- a/configs/iot2050_defconfig +++ b/configs/iot2050_defconfig @@ -22,6 +22,8 @@ CONFIG_ENV_OFFSET_REDUND=0x6a0000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80100000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set @@ -31,9 +33,15 @@ CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_SPL_SHOW_BOOT_PROGRESS=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_MAX_SIZE=0x58000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80a00000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DM_MAILBOX=y @@ -45,6 +53,8 @@ CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 CONFIG_SYS_PROMPT="IOT2050> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y CONFIG_CMD_GPT=y diff --git a/configs/iot_devkit_defconfig b/configs/iot_devkit_defconfig index b22050daa37..08945621400 100644 --- a/configs/iot_devkit_defconfig +++ b/configs/iot_devkit_defconfig @@ -12,8 +12,12 @@ CONFIG_DEFAULT_DEVICE_TREE="iot_devkit" CONFIG_SYS_CLK_FREQ=16000000 CONFIG_SYS_LOAD_ADDR=0x30000000 CONFIG_LOCALVERSION="-iotdk-1.0" +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80008000 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_SYS_PROMPT="IoTDK# " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=280 # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_BOOTM is not set # CONFIG_CMD_ELF is not set diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig index 3eba6984476..82842596045 100644 --- a/configs/j7200_evm_a72_defconfig +++ b/configs/j7200_evm_a72_defconfig @@ -25,6 +25,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_PSCI_RESET is not set CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 @@ -32,13 +34,20 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" CONFIG_LOGLEVEL=7 +CONFIG_SPL_MAX_SIZE=0xc0000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80a00000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_MTD_SUPPORT=y @@ -55,6 +64,7 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig index 0f4b006b80b..a0f9f20f2f5 100644 --- a/configs/j7200_evm_r5_defconfig +++ b/configs/j7200_evm_r5_defconfig @@ -21,6 +21,8 @@ CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41cf5bfc # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000 @@ -28,9 +30,17 @@ CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_MAX_SIZE=0xc0000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x41cf5bfc +CONFIG_SPL_BSS_MAX_SIZE=0xa000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 @@ -55,6 +65,7 @@ CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig index 931abf5e597..4cb4adb25b2 100644 --- a/configs/j721e_evm_a72_defconfig +++ b/configs/j721e_evm_a72_defconfig @@ -23,19 +23,28 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_PSCI_RESET is not set CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" CONFIG_LOGLEVEL=7 +CONFIG_SPL_MAX_SIZE=0xc0000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80a00000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_DM_SPI_FLASH=y @@ -50,6 +59,7 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/j721e_evm_r5_defconfig b/configs/j721e_evm_r5_defconfig index 6553212de85..385e77d846d 100644 --- a/configs/j721e_evm_r5_defconfig +++ b/configs/j721e_evm_r5_defconfig @@ -21,6 +21,8 @@ CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41cf5bfc # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000 @@ -28,9 +30,17 @@ CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_MAX_SIZE=0xc0000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x41cf5bfc +CONFIG_SPL_BSS_MAX_SIZE=0xa000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 @@ -53,6 +63,7 @@ CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y diff --git a/configs/j721e_hs_evm_a72_defconfig b/configs/j721e_hs_evm_a72_defconfig index 7c826e8d31f..0f803b83039 100644 --- a/configs/j721e_hs_evm_a72_defconfig +++ b/configs/j721e_hs_evm_a72_defconfig @@ -24,16 +24,25 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_PSCI_RESET is not set CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; run get_fit_${boot}; run get_overlaystring; run run_fit" CONFIG_LOGLEVEL=7 +CONFIG_SPL_MAX_SIZE=0xc0000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80a00000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_DM_SPI_FLASH=y @@ -44,6 +53,7 @@ CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/j721e_hs_evm_r5_defconfig b/configs/j721e_hs_evm_r5_defconfig index 11b6e1e5606..02a66652238 100644 --- a/configs/j721e_hs_evm_r5_defconfig +++ b/configs/j721e_hs_evm_r5_defconfig @@ -23,14 +23,24 @@ CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41cf5bfc # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000 # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_MAX_SIZE=0xc0000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x41cf5bfc +CONFIG_SPL_BSS_MAX_SIZE=0xa000 CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y @@ -48,6 +58,7 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/j721s2_evm_a72_defconfig b/configs/j721s2_evm_a72_defconfig index 0023f73d9e8..14dfb6946f6 100644 --- a/configs/j721s2_evm_a72_defconfig +++ b/configs/j721s2_evm_a72_defconfig @@ -25,6 +25,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_PSCI_RESET is not set CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 @@ -32,13 +34,20 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" CONFIG_LOGLEVEL=7 +CONFIG_SPL_MAX_SIZE=0xc0000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80a00000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_MTD_SUPPORT=y @@ -56,6 +65,7 @@ CONFIG_SPL_THERMAL=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/j721s2_evm_r5_defconfig b/configs/j721s2_evm_r5_defconfig index 4147b4e26c7..fb6e69197d1 100644 --- a/configs/j721s2_evm_r5_defconfig +++ b/configs/j721s2_evm_r5_defconfig @@ -23,6 +23,8 @@ CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41c76000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000 @@ -32,11 +34,19 @@ CONFIG_USE_BOOTCOMMAND=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y +CONFIG_SPL_MAX_SIZE=0xc0000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x41c76000 +CONFIG_SPL_BSS_MAX_SIZE=0xa000 CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 @@ -62,6 +72,7 @@ CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index 0ff666b2ee5..5fce5836c9c 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -8,7 +8,9 @@ CONFIG_MACPWR="PH19" CONFIG_USB0_VBUS_PIN="PB9" CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/jethub_j100_defconfig b/configs/jethub_j100_defconfig index 63c5329398f..342e7e0d79f 100644 --- a/configs/jethub_j100_defconfig +++ b/configs/jethub_j100_defconfig @@ -13,10 +13,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" jethubj100" CONFIG_SYS_LOAD_ADDR=0x01000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_EEPROM=y diff --git a/configs/jethub_j80_defconfig b/configs/jethub_j80_defconfig index 8746ed9c80f..1a6a697c1ba 100644 --- a/configs/jethub_j80_defconfig +++ b/configs/jethub_j80_defconfig @@ -13,11 +13,14 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" jethubj80" CONFIG_SYS_LOAD_ADDR=0x01000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_EEPROM=y diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index 425b123ba1d..b0c7ea3b994 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -14,7 +14,17 @@ CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x800ffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra124 (Jetson TK1) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2089 # CONFIG_CMD_IMI is not set CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig index 17b83d3b343..58c8c13b15a 100644 --- a/configs/k2e_evm_defconfig +++ b/configs/k2e_evm_defconfig @@ -22,11 +22,21 @@ CONFIG_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0fff10 CONFIG_TIMESTAMP=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run init_${boot}; run get_mon_${boot} run_mon; run get_kern_${boot}; run init_fw_rd_${boot}; run get_fdt_${boot}; run run_kern" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0xfff8 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xc10fff8 +CONFIG_SPL_BSS_MAX_SIZE=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xc1223f4 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x8000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -35,6 +45,8 @@ CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 +CONFIG_SPL_TARGET="u-boot-spi.gph" +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20 diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig index a4efc4f85cc..da4e4ca7f76 100644 --- a/configs/k2e_hs_evm_defconfig +++ b/configs/k2e_hs_evm_defconfig @@ -15,11 +15,15 @@ CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="keystone-k2e-evm" CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0fff10 CONFIG_TIMESTAMP=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run run_mon_hs; run init_${boot}; run get_fit_${boot}; bootm ${addr_fit}#${name_fdt}" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0xfff8 +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20 diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig index db21695da52..b96d1fc7c1a 100644 --- a/configs/k2g_evm_defconfig +++ b/configs/k2g_evm_defconfig @@ -21,11 +21,21 @@ CONFIG_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc09ff10 CONFIG_TIMESTAMP=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_mon_${boot} run_mon; run set_name_pmmc get_pmmc_${boot} run_pmmc; run get_kern_${boot}; run init_fw_rd_${boot}; run get_fdt_${boot}; run run_kern" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0xfff8 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xc0afff8 +CONFIG_SPL_BSS_MAX_SIZE=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xc0c23f4 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x8000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -33,6 +43,8 @@ CONFIG_SPL_NAND_BASE=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 +CONFIG_SPL_TARGET="u-boot-spi.gph" +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20 diff --git a/configs/k2g_hs_evm_defconfig b/configs/k2g_hs_evm_defconfig index f74af6de3ff..d865c12166f 100644 --- a/configs/k2g_hs_evm_defconfig +++ b/configs/k2g_hs_evm_defconfig @@ -14,11 +14,15 @@ CONFIG_TARGET_K2G_EVM=y CONFIG_ENV_SIZE=0x40000 CONFIG_DEFAULT_DEVICE_TREE="keystone-k2g-evm" CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc09ff10 CONFIG_TIMESTAMP=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run envboot; run run_mon_hs; run init_${boot}; run get_fit_${boot}; bootm ${addr_fit}#${name_fdt}" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0xfff8 +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20 diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig index 754fed7c3cc..cfe5978e550 100644 --- a/configs/k2hk_evm_defconfig +++ b/configs/k2hk_evm_defconfig @@ -22,11 +22,21 @@ CONFIG_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc1fff10 CONFIG_TIMESTAMP=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run init_${boot}; run get_mon_${boot} run_mon; run get_kern_${boot}; run init_fw_rd_${boot}; run get_fdt_${boot}; run run_kern" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0xfff8 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xc20fff8 +CONFIG_SPL_BSS_MAX_SIZE=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xc2223f4 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x8000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -35,6 +45,8 @@ CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 +CONFIG_SPL_TARGET="u-boot-spi.gph" +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20 diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig index 8f659cdfc82..4f4dbcd5e17 100644 --- a/configs/k2hk_hs_evm_defconfig +++ b/configs/k2hk_hs_evm_defconfig @@ -15,11 +15,15 @@ CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="keystone-k2hk-evm" CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc1fff10 CONFIG_TIMESTAMP=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run run_mon_hs; run init_${boot}; run get_fit_${boot}; bootm ${addr_fit}#${name_fdt}" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0xfff8 +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20 diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig index 4f13da8da4e..47d5bd14ac5 100644 --- a/configs/k2l_evm_defconfig +++ b/configs/k2l_evm_defconfig @@ -22,11 +22,21 @@ CONFIG_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0fff10 CONFIG_TIMESTAMP=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run init_${boot}; run get_mon_${boot} run_mon; run get_kern_${boot}; run init_fw_rd_${boot}; run get_fdt_${boot}; run run_kern" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0xfff8 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xc10fff8 +CONFIG_SPL_BSS_MAX_SIZE=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xc1223f4 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x8000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -35,6 +45,8 @@ CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 +CONFIG_SPL_TARGET="u-boot-spi.gph" +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20 diff --git a/configs/k2l_hs_evm_defconfig b/configs/k2l_hs_evm_defconfig index d863e40fd1a..292806ff639 100644 --- a/configs/k2l_hs_evm_defconfig +++ b/configs/k2l_hs_evm_defconfig @@ -14,13 +14,17 @@ CONFIG_TARGET_K2L_EVM=y CONFIG_ENV_SIZE=0x40000 CONFIG_ENV_OFFSET=0x100000 CONFIG_DEFAULT_DEVICE_TREE="keystone-k2l-evm" +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0fff10 CONFIG_TIMESTAMP=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run run_mon_hs; run init_${boot}; run get_fit_${boot}; bootm ${addr_fit}#${name_fdt}" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0xfff8 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20 diff --git a/configs/khadas-edge-captain-rk3399_defconfig b/configs/khadas-edge-captain-rk3399_defconfig index cddf5228b60..e9618e3e207 100644 --- a/configs/khadas-edge-captain-rk3399_defconfig +++ b/configs/khadas-edge-captain-rk3399_defconfig @@ -12,13 +12,23 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-khadas-edge-captain.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y CONFIG_SYS_PROMPT="kedge# " +CONFIG_SYS_PBSIZE=1048 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/khadas-edge-rk3399_defconfig b/configs/khadas-edge-rk3399_defconfig index bd52c015fa4..252a02b579e 100644 --- a/configs/khadas-edge-rk3399_defconfig +++ b/configs/khadas-edge-rk3399_defconfig @@ -12,13 +12,23 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-khadas-edge.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y CONFIG_SYS_PROMPT="kedge# " +CONFIG_SYS_PBSIZE=1048 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/khadas-edge-v-rk3399_defconfig b/configs/khadas-edge-v-rk3399_defconfig index 21bf9487a86..731fbfcab26 100644 --- a/configs/khadas-edge-v-rk3399_defconfig +++ b/configs/khadas-edge-v-rk3399_defconfig @@ -12,13 +12,23 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-khadas-edge-v.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y CONFIG_SYS_PROMPT="kedge# " +CONFIG_SYS_PBSIZE=1048 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/khadas-vim2_defconfig b/configs/khadas-vim2_defconfig index 8345e47bddb..bee5abe4cdb 100644 --- a/configs/khadas-vim2_defconfig +++ b/configs/khadas-vim2_defconfig @@ -11,11 +11,14 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim2" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_ADC=y diff --git a/configs/khadas-vim3_android_ab_defconfig b/configs/khadas-vim3_android_ab_defconfig index df97c519fec..d025e444bdd 100644 --- a/configs/khadas-vim3_android_ab_defconfig +++ b/configs/khadas-vim3_android_ab_defconfig @@ -13,12 +13,15 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim3" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y CONFIG_AVB_VERIFY=y CONFIG_ANDROID_AB=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set CONFIG_CMD_ADTIMG=y CONFIG_CMD_ABOOTIMG=y diff --git a/configs/khadas-vim3_android_defconfig b/configs/khadas-vim3_android_defconfig index 299150cf207..825f687fdd8 100644 --- a/configs/khadas-vim3_android_defconfig +++ b/configs/khadas-vim3_android_defconfig @@ -13,11 +13,14 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim3" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y CONFIG_AVB_VERIFY=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set CONFIG_CMD_ADTIMG=y CONFIG_CMD_ABOOTIMG=y diff --git a/configs/khadas-vim3_defconfig b/configs/khadas-vim3_defconfig index 75ccfba2aea..68ab1546bf0 100644 --- a/configs/khadas-vim3_defconfig +++ b/configs/khadas-vim3_defconfig @@ -12,10 +12,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim3" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/khadas-vim3l_android_ab_defconfig b/configs/khadas-vim3l_android_ab_defconfig index 615f2d9b6c0..fc766ee476c 100644 --- a/configs/khadas-vim3l_android_ab_defconfig +++ b/configs/khadas-vim3l_android_ab_defconfig @@ -13,12 +13,15 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim3l" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y CONFIG_AVB_VERIFY=y CONFIG_ANDROID_AB=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set CONFIG_CMD_ADTIMG=y CONFIG_CMD_ABOOTIMG=y diff --git a/configs/khadas-vim3l_android_defconfig b/configs/khadas-vim3l_android_defconfig index ad4eb281f15..372aa7d91cf 100644 --- a/configs/khadas-vim3l_android_defconfig +++ b/configs/khadas-vim3l_android_defconfig @@ -13,11 +13,14 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim3l" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y CONFIG_AVB_VERIFY=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set CONFIG_CMD_ADTIMG=y CONFIG_CMD_ABOOTIMG=y diff --git a/configs/khadas-vim3l_defconfig b/configs/khadas-vim3l_defconfig index 2e1eabca652..df7e01d1f98 100644 --- a/configs/khadas-vim3l_defconfig +++ b/configs/khadas-vim3l_defconfig @@ -12,10 +12,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim3l" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/khadas-vim_defconfig b/configs/khadas-vim_defconfig index e450d27244a..9444fe8258d 100644 --- a/configs/khadas-vim_defconfig +++ b/configs/khadas-vim_defconfig @@ -11,11 +11,14 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_ADC=y diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig index ce872c14908..1d8ae5876b9 100644 --- a/configs/km_kirkwood_128m16_defconfig +++ b/configs/km_kirkwood_128m16_defconfig @@ -15,6 +15,8 @@ CONFIG_ENV_OFFSET_REDUND=0x2000 CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood 128M16" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_KM_KIRKWOOD_128M16=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " @@ -22,6 +24,9 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig index 26be327e226..d2f2ff4e23e 100644 --- a/configs/km_kirkwood_defconfig +++ b/configs/km_kirkwood_defconfig @@ -15,6 +15,8 @@ CONFIG_ENV_OFFSET_REDUND=0x2000 CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_KM_KIRKWOOD=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " @@ -22,6 +24,9 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/km_kirkwood_pci_defconfig b/configs/km_kirkwood_pci_defconfig index 493b16d4cda..4d116c3a7ad 100644 --- a/configs/km_kirkwood_pci_defconfig +++ b/configs/km_kirkwood_pci_defconfig @@ -16,6 +16,8 @@ CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood PCI" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_KM_FPGA_CONFIG=y CONFIG_KM_KIRKWOOD_PCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " @@ -23,6 +25,9 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/kmcent2_defconfig b/configs/kmcent2_defconfig index e90c2387901..17e899a9196 100644 --- a/configs/kmcent2_defconfig +++ b/configs/kmcent2_defconfig @@ -23,6 +23,9 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig index 00c98483b30..924f9ac4637 100644 --- a/configs/kmcoge5ne_defconfig +++ b/configs/kmcoge5ne_defconfig @@ -168,6 +168,9 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig index 1cb21c243b5..9654b8d8060 100644 --- a/configs/kmcoge5un_defconfig +++ b/configs/kmcoge5un_defconfig @@ -18,6 +18,8 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3 CONFIG_KM_ENV_IS_IN_SPI_NOR=y CONFIG_KM_PIGGY4_88E6352=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " @@ -25,6 +27,9 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig index ae29991c492..dfa2500a29a 100644 --- a/configs/kmeter1_defconfig +++ b/configs/kmeter1_defconfig @@ -138,6 +138,9 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig index b3855915b86..8cbde0e178a 100644 --- a/configs/kmnusa_defconfig +++ b/configs/kmnusa_defconfig @@ -19,6 +19,8 @@ CONFIG_KM_FPGA_CONFIG=y CONFIG_KM_ENV_IS_IN_SPI_NOR=y CONFIG_KM_PIGGY4_88E6352=y CONFIG_KM_NUSA=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " @@ -26,6 +28,9 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig index 45bc3eb3b4d..7775b604f57 100644 --- a/configs/kmopti2_defconfig +++ b/configs/kmopti2_defconfig @@ -151,6 +151,9 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig index 08d217986d7..221335da8ea 100644 --- a/configs/kmsupx5_defconfig +++ b/configs/kmsupx5_defconfig @@ -131,6 +131,9 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/configs/kmsuse2_defconfig b/configs/kmsuse2_defconfig index 25ae6a4b2ca..8e27f9f6af3 100644 --- a/configs/kmsuse2_defconfig +++ b/configs/kmsuse2_defconfig @@ -20,6 +20,8 @@ CONFIG_KM_FPGA_FORCE_CONFIG=y CONFIG_KM_FPGA_NO_RESET=y CONFIG_KM_ENV_IS_IN_SPI_NOR=y CONFIG_KM_SUSE2=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" CONFIG_AUTOBOOT_STOP_STR=" " @@ -27,6 +29,9 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig index a752672ead1..f1791a0fc0e 100644 --- a/configs/kmtegr1_defconfig +++ b/configs/kmtegr1_defconfig @@ -130,6 +130,9 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig index a0cca5b9f28..6670c317a19 100644 --- a/configs/kmtepr2_defconfig +++ b/configs/kmtepr2_defconfig @@ -151,6 +151,9 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/configs/koelsch_defconfig b/configs/koelsch_defconfig index c3a88f69267..467b44c3e6b 100644 --- a/configs/koelsch_defconfig +++ b/configs/koelsch_defconfig @@ -26,16 +26,24 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x50000000 CONFIG_ENV_ADDR=0xC0000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4f000000 CONFIG_FIT=y CONFIG_BOOTDELAY=3 +CONFIG_SPL_MAX_SIZE=0x4000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6340000 CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=256 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/kontron-sl-mx6ul_defconfig b/configs/kontron-sl-mx6ul_defconfig index 11e4e956c8e..efa7a06886a 100644 --- a/configs/kontron-sl-mx6ul_defconfig +++ b/configs/kontron-sl-mx6ul_defconfig @@ -28,9 +28,12 @@ CONFIG_BOARD_TYPES=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig index 2e9d52522b2..0fceb60c612 100644 --- a/configs/kontron-sl-mx8mm_defconfig +++ b/configs/kontron-sl-mx8mm_defconfig @@ -26,7 +26,17 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_OF_BOARD_SETUP=y CONFIG_BOARD_TYPES=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x91fff0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 # CONFIG_SPL_FIT_IMAGE_TINY is not set @@ -35,6 +45,8 @@ CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SPL_ATF=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_LZMADEC is not set CONFIG_CMD_CLK=y diff --git a/configs/kontron_pitx_imx8m_defconfig b/configs/kontron_pitx_imx8m_defconfig index 07a07bd53f9..27a89f9b1b6 100644 --- a/configs/kontron_pitx_imx8m_defconfig +++ b/configs/kontron_pitx_imx8m_defconfig @@ -30,11 +30,23 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x180000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x187ff0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig index dc8c28f8cca..aaabb14f91a 100644 --- a/configs/kontron_sl28_defconfig +++ b/configs/kontron_sl28_defconfig @@ -25,6 +25,8 @@ CONFIG_ARMV8_PSCI_RELOCATE=y CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800eff0 CONFIG_MP=y CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y @@ -35,10 +37,19 @@ CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOARD_LATE_INIT=y CONFIG_PCI_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x18009ff0 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x230000 +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_NVEDIT_EFI=y diff --git a/configs/kp_imx53_defconfig b/configs/kp_imx53_defconfig index 3ec33477208..6f60aa96f12 100644 --- a/configs/kp_imx53_defconfig +++ b/configs/kp_imx53_defconfig @@ -22,6 +22,7 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/kp_imx6q_tpc_defconfig b/configs/kp_imx6q_tpc_defconfig index 9c9aac369d6..8c5010d6052 100644 --- a/configs/kp_imx6q_tpc_defconfig +++ b/configs/kp_imx6q_tpc_defconfig @@ -27,8 +27,11 @@ CONFIG_AUTOBOOT_STOP_STR="." # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SPL_RAW_IMAGE_SUPPORT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_ELF is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/kylin-rk3036_defconfig b/configs/kylin-rk3036_defconfig index 0111f30e14d..4f17de826c8 100644 --- a/configs/kylin-rk3036_defconfig +++ b/configs/kylin-rk3036_defconfig @@ -19,12 +19,16 @@ CONFIG_DEBUG_UART_BASE=0x20068000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x60800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x60100000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3036-kylin.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_STACK_R=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y diff --git a/configs/kzm9g_defconfig b/configs/kzm9g_defconfig index 45881b5dd1c..9a944cad39c 100644 --- a/configs/kzm9g_defconfig +++ b/configs/kzm9g_defconfig @@ -18,6 +18,8 @@ CONFIG_BOOTARGS="root=/dev/null console=ttySC4,115200" # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="KZM-A9-GT# " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=256 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_I2C=y @@ -34,6 +36,7 @@ CONFIG_SYS_I2C_SH=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_CFI=y CONFIG_SMC911X=y CONFIG_SMC911X_BASE=0x10000000 diff --git a/configs/lager_defconfig b/configs/lager_defconfig index 503c7e05dfb..c9ec38d711f 100644 --- a/configs/lager_defconfig +++ b/configs/lager_defconfig @@ -26,16 +26,24 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x50000000 CONFIG_ENV_ADDR=0xC0000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4f000000 CONFIG_FIT=y CONFIG_BOOTDELAY=3 +CONFIG_SPL_MAX_SIZE=0x4000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6340000 CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=256 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/leez-rk3399_defconfig b/configs/leez-rk3399_defconfig index 2fa8d563ebe..1e708ed3f90 100644 --- a/configs/leez-rk3399_defconfig +++ b/configs/leez-rk3399_defconfig @@ -12,8 +12,17 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-leez-p710.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/legoev3_defconfig b/configs/legoev3_defconfig index 1d35e75a1ba..3612afb463c 100644 --- a/configs/legoev3_defconfig +++ b/configs/legoev3_defconfig @@ -9,6 +9,8 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="da850-lego-ev3" CONFIG_SYS_LOAD_ADDR=0xc0700000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80010000 CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=0 CONFIG_AUTOBOOT_KEYED=y diff --git a/configs/libretech-ac_defconfig b/configs/libretech-ac_defconfig index 1e51b7a6537..cce1b36758e 100644 --- a/configs/libretech-ac_defconfig +++ b/configs/libretech-ac_defconfig @@ -14,12 +14,15 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" libretech-ac" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_ADC=y diff --git a/configs/libretech-cc_defconfig b/configs/libretech-cc_defconfig index 5506f386f2e..d1e925039e6 100644 --- a/configs/libretech-cc_defconfig +++ b/configs/libretech-cc_defconfig @@ -11,10 +11,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" libretech-cc" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_ADC=y diff --git a/configs/libretech-cc_v2_defconfig b/configs/libretech-cc_v2_defconfig index a3fb6bbbda2..ba27e65d9aa 100644 --- a/configs/libretech-cc_v2_defconfig +++ b/configs/libretech-cc_v2_defconfig @@ -13,12 +13,15 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" libretech-cc-v2" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/libretech-s905d-pc_defconfig b/configs/libretech-s905d-pc_defconfig index 8ee69ca5ec8..99a099d0a52 100644 --- a/configs/libretech-s905d-pc_defconfig +++ b/configs/libretech-s905d-pc_defconfig @@ -14,11 +14,14 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" libretech-s905d-pc" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_ADC=y diff --git a/configs/libretech-s912-pc_defconfig b/configs/libretech-s912-pc_defconfig index 224a3fb02fc..e65db0778c2 100644 --- a/configs/libretech-s912-pc_defconfig +++ b/configs/libretech-s912-pc_defconfig @@ -13,11 +13,14 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" libretech-s912-pc" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_ADC=y diff --git a/configs/libretech_all_h3_cc_h2_plus_defconfig b/configs/libretech_all_h3_cc_h2_plus_defconfig index 8725fe64cdc..ca995568024 100644 --- a/configs/libretech_all_h3_cc_h2_plus_defconfig +++ b/configs/libretech_all_h3_cc_h2_plus_defconfig @@ -6,6 +6,8 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/libretech_all_h3_cc_h3_defconfig b/configs/libretech_all_h3_cc_h3_defconfig index 5275fdc36da..7ca312c8fbc 100644 --- a/configs/libretech_all_h3_cc_h3_defconfig +++ b/configs/libretech_all_h3_cc_h3_defconfig @@ -6,6 +6,8 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/libretech_all_h3_cc_h5_defconfig b/configs/libretech_all_h3_cc_h5_defconfig index 96274019499..524138aa2e1 100644 --- a/configs/libretech_all_h3_cc_h5_defconfig +++ b/configs/libretech_all_h3_cc_h5_defconfig @@ -6,6 +6,8 @@ CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_CLK=672 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/libretech_all_h3_it_h5_defconfig b/configs/libretech_all_h3_it_h5_defconfig index cb7ffb4d7da..1b083335863 100644 --- a/configs/libretech_all_h3_it_h5_defconfig +++ b/configs/libretech_all_h3_it_h5_defconfig @@ -7,6 +7,8 @@ CONFIG_DRAM_CLK=672 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SPI_FLASH_XMC=y CONFIG_SPI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/libretech_all_h5_cc_h5_defconfig b/configs/libretech_all_h5_cc_h5_defconfig index c3aa4b10617..e0734f96735 100644 --- a/configs/libretech_all_h5_cc_h5_defconfig +++ b/configs/libretech_all_h5_cc_h5_defconfig @@ -7,6 +7,8 @@ CONFIG_DRAM_CLK=672 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SPI_FLASH_XMC=y CONFIG_SUN8I_EMAC=y CONFIG_SPI=y diff --git a/configs/licheepi_nano_defconfig b/configs/licheepi_nano_defconfig index 9fd1dcc9958..0252763c776 100644 --- a/configs/licheepi_nano_defconfig +++ b/configs/licheepi_nano_defconfig @@ -10,3 +10,6 @@ CONFIG_DRAM_CLK=156 CONFIG_DRAM_ZQ=0 # CONFIG_VIDEO_SUNXI is not set CONFIG_SPL_SPI_SUNXI=y +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 +# CONFIG_SYSRESET is not set diff --git a/configs/linkit-smart-7688_defconfig b/configs/linkit-smart-7688_defconfig index 52e5524726f..a129679e9d4 100644 --- a/configs/linkit-smart-7688_defconfig +++ b/configs/linkit-smart-7688_defconfig @@ -28,9 +28,16 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_BSS_START_ADDR=0x80010000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_LICENSE=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/lion-rk3368_defconfig b/configs/lion-rk3368_defconfig index 426913816bf..1b148f5c0f6 100644 --- a/configs/lion-rk3368_defconfig +++ b/configs/lion-rk3368_defconfig @@ -19,6 +19,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y @@ -30,14 +32,22 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-lion-haikou.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_EARLY_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x20000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_TPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x188000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 CONFIG_SPL_ATF=y CONFIG_TPL=y +CONFIG_TPL_MAX_SIZE=0x40000 CONFIG_TPL_DRIVERS_MISC=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/liteboard_defconfig b/configs/liteboard_defconfig index bf700dffb7f..24e71bb48d8 100644 --- a/configs/liteboard_defconfig +++ b/configs/liteboard_defconfig @@ -24,8 +24,11 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_DEFAULT_FDT_FILE="imx6ul-liteboard.dtb" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/ls1012a2g5rdb_qspi_defconfig b/configs/ls1012a2g5rdb_qspi_defconfig index cb9ad24b122..0ab5c868af4 100644 --- a/configs/ls1012a2g5rdb_qspi_defconfig +++ b/configs/ls1012a2g5rdb_qspi_defconfig @@ -15,6 +15,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -26,6 +28,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1012a2g5rdb_tfa_defconfig b/configs/ls1012a2g5rdb_tfa_defconfig index 8763e0d7b04..4a65705a8eb 100644 --- a/configs/ls1012a2g5rdb_tfa_defconfig +++ b/configs/ls1012a2g5rdb_tfa_defconfig @@ -26,6 +26,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig index fa3486cfbb7..8c70bf09515 100644 --- a/configs/ls1012afrdm_qspi_defconfig +++ b/configs/ls1012afrdm_qspi_defconfig @@ -14,6 +14,8 @@ CONFIG_QSPI_AHB_INIT=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -25,6 +27,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd;run qspi_bootcmd" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1012afrdm_tfa_defconfig b/configs/ls1012afrdm_tfa_defconfig index a56a27bfc29..c425a7aae83 100644 --- a/configs/ls1012afrdm_tfa_defconfig +++ b/configs/ls1012afrdm_tfa_defconfig @@ -25,6 +25,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig index e25d964124c..7c69d56d52c 100644 --- a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig @@ -13,6 +13,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -24,6 +26,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1012afrwy_qspi_defconfig b/configs/ls1012afrwy_qspi_defconfig index e0ae291872c..bb30e27e00f 100644 --- a/configs/ls1012afrwy_qspi_defconfig +++ b/configs/ls1012afrwy_qspi_defconfig @@ -15,6 +15,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -26,6 +28,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig index 56ddeaaf4d6..21c989cff9f 100644 --- a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig @@ -24,6 +24,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1012afrwy_tfa_defconfig b/configs/ls1012afrwy_tfa_defconfig index 4d718cd44ea..129855f9840 100644 --- a/configs/ls1012afrwy_tfa_defconfig +++ b/configs/ls1012afrwy_tfa_defconfig @@ -25,6 +25,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig index eedb895c6b3..1adf0fe0701 100644 --- a/configs/ls1012aqds_qspi_defconfig +++ b/configs/ls1012aqds_qspi_defconfig @@ -16,6 +16,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -29,6 +31,8 @@ CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 diff --git a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig index fa847f3844f..a77e124b4b7 100644 --- a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig @@ -28,6 +28,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 diff --git a/configs/ls1012aqds_tfa_defconfig b/configs/ls1012aqds_tfa_defconfig index 295d27173ea..5f361b6a355 100644 --- a/configs/ls1012aqds_tfa_defconfig +++ b/configs/ls1012aqds_tfa_defconfig @@ -30,6 +30,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig index eccaf131604..02d6e0f2e11 100644 --- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig @@ -14,6 +14,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -25,6 +27,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig index d9293d3e243..0a6c43f04a5 100644 --- a/configs/ls1012ardb_qspi_defconfig +++ b/configs/ls1012ardb_qspi_defconfig @@ -16,6 +16,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -27,6 +29,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig index 8397c499896..6dc5674dbf1 100644 --- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig @@ -26,6 +26,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1012ardb_tfa_defconfig b/configs/ls1012ardb_tfa_defconfig index 82ccb856c3a..4224b48f9d8 100644 --- a/configs/ls1012ardb_tfa_defconfig +++ b/configs/ls1012ardb_tfa_defconfig @@ -26,6 +26,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1021aiot_qspi_defconfig b/configs/ls1021aiot_qspi_defconfig index 0e869a2295e..8b588f7d704 100644 --- a/configs/ls1021aiot_qspi_defconfig +++ b/configs/ls1021aiot_qspi_defconfig @@ -22,6 +22,8 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/ls1021aiot_sdcard_defconfig b/configs/ls1021aiot_sdcard_defconfig index 030480bdbf8..d34897a5080 100644 --- a/configs/ls1021aiot_sdcard_defconfig +++ b/configs/ls1021aiot_sdcard_defconfig @@ -31,13 +31,25 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SPL_MAX_SIZE=0x1a000 +CONFIG_SPL_PAD_TO=0x1c000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001d000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x82080000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig index 70501cb3f09..915871338e0 100644 --- a/configs/ls1021aqds_ddr4_nor_defconfig +++ b/configs/ls1021aqds_ddr4_nor_defconfig @@ -32,6 +32,8 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig index 1948abc74ac..00d9d3eced9 100644 --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig @@ -32,6 +32,8 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig index 7bb42051378..cfa81baff60 100644 --- a/configs/ls1021aqds_nand_defconfig +++ b/configs/ls1021aqds_nand_defconfig @@ -41,7 +41,17 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SPL_MAX_SIZE=0x1a000 +CONFIG_SPL_PAD_TO=0x1c000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001d000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80200000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y @@ -50,6 +60,8 @@ CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig index 6b6cf1fcdde..ad7e390b5c4 100644 --- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig @@ -31,6 +31,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig index d5b85db931a..1434817e1c4 100644 --- a/configs/ls1021aqds_nor_defconfig +++ b/configs/ls1021aqds_nor_defconfig @@ -32,6 +32,8 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig index 6f18270c7ef..9bfbe2eff97 100644 --- a/configs/ls1021aqds_nor_lpuart_defconfig +++ b/configs/ls1021aqds_nor_lpuart_defconfig @@ -32,6 +32,8 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig index d677ff72288..02d056f4e6c 100644 --- a/configs/ls1021aqds_qspi_defconfig +++ b/configs/ls1021aqds_qspi_defconfig @@ -31,6 +31,8 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig index 61809aae70e..164e8b01768 100644 --- a/configs/ls1021aqds_sdcard_ifc_defconfig +++ b/configs/ls1021aqds_sdcard_ifc_defconfig @@ -40,7 +40,17 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SPL_MAX_SIZE=0x1a000 +CONFIG_SPL_PAD_TO=0x1c000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001d000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x820c0000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y @@ -48,6 +58,8 @@ CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig index 66f930aa61d..8a6357b0b21 100644 --- a/configs/ls1021aqds_sdcard_qspi_defconfig +++ b/configs/ls1021aqds_sdcard_qspi_defconfig @@ -39,7 +39,17 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SPL_MAX_SIZE=0x1a000 +CONFIG_SPL_PAD_TO=0x1c000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001d000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x820c0000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y @@ -47,6 +57,8 @@ CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1021atsn_qspi_defconfig b/configs/ls1021atsn_qspi_defconfig index 0b42b195f9a..cfa83b8c3b8 100644 --- a/configs/ls1021atsn_qspi_defconfig +++ b/configs/ls1021atsn_qspi_defconfig @@ -24,6 +24,8 @@ CONFIG_SILENT_CONSOLE=y CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1021atsn_sdcard_defconfig b/configs/ls1021atsn_sdcard_defconfig index e6fdec2974c..5e93f730b32 100644 --- a/configs/ls1021atsn_sdcard_defconfig +++ b/configs/ls1021atsn_sdcard_defconfig @@ -33,13 +33,25 @@ CONFIG_SILENT_CONSOLE=y CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SPL_MAX_SIZE=0x1a000 +CONFIG_SPL_PAD_TO=0x1c000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001d000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x82100000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_GREPENV=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig index 628e1d475e5..175f10f1f55 100644 --- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig @@ -30,6 +30,8 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig index c4df3338d7d..e80b793a382 100644 --- a/configs/ls1021atwr_nor_defconfig +++ b/configs/ls1021atwr_nor_defconfig @@ -31,6 +31,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig index aa6b619d34b..a22d2a59210 100644 --- a/configs/ls1021atwr_nor_lpuart_defconfig +++ b/configs/ls1021atwr_nor_lpuart_defconfig @@ -31,6 +31,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig index 1edc123181f..aadc61b66ca 100644 --- a/configs/ls1021atwr_qspi_defconfig +++ b/configs/ls1021atwr_qspi_defconfig @@ -32,6 +32,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig index 7824b24fb0d..f16c156490d 100644 --- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig @@ -40,13 +40,25 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SPL_MAX_SIZE=0x1a000 +CONFIG_SPL_PAD_TO=0x1c000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001d000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x82104000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig index 8bab45bcffe..c9a265d7819 100644 --- a/configs/ls1021atwr_sdcard_ifc_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_defconfig @@ -41,13 +41,25 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SPL_MAX_SIZE=0x1a000 +CONFIG_SPL_PAD_TO=0x1c000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001d000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x82100000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig index a0f05d513da..e4f2b858235 100644 --- a/configs/ls1021atwr_sdcard_qspi_defconfig +++ b/configs/ls1021atwr_sdcard_qspi_defconfig @@ -42,13 +42,25 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SPL_MAX_SIZE=0x1a000 +CONFIG_SPL_PAD_TO=0x1c000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001d000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x82100000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig index 2e4db036a44..7b8f71cfb55 100644 --- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig @@ -29,6 +29,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig index 556f77e2225..8c1655341e5 100644 --- a/configs/ls1028aqds_tfa_defconfig +++ b/configs/ls1028aqds_tfa_defconfig @@ -31,6 +31,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig index 2adb28c89d1..7e0860103f0 100644 --- a/configs/ls1028aqds_tfa_lpuart_defconfig +++ b/configs/ls1028aqds_tfa_lpuart_defconfig @@ -30,6 +30,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig index 20cb844b01f..15777f93b60 100644 --- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig @@ -28,6 +28,8 @@ CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" CONFIG_ID_EEPROM=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig index fdfdf39c619..ec4f253e9f0 100644 --- a/configs/ls1028ardb_tfa_defconfig +++ b/configs/ls1028ardb_tfa_defconfig @@ -30,6 +30,8 @@ CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" CONFIG_ID_EEPROM=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMTEST=y diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig index 49ed96365e9..5a40f002c86 100644 --- a/configs/ls1043aqds_defconfig +++ b/configs/ls1043aqds_defconfig @@ -25,6 +25,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -36,6 +38,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig index bd5c5f7fea6..0acb8817ec0 100644 --- a/configs/ls1043aqds_lpuart_defconfig +++ b/configs/ls1043aqds_lpuart_defconfig @@ -25,6 +25,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -36,6 +38,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig index aba4a1e98a0..1fe04fe769e 100644 --- a/configs/ls1043aqds_nand_defconfig +++ b/configs/ls1043aqds_nand_defconfig @@ -30,6 +30,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -45,7 +47,17 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x1a000 +CONFIG_SPL_PAD_TO=0x20000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001d000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80200000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y @@ -53,6 +65,8 @@ CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig index 9c1886b6ffb..af362b13472 100644 --- a/configs/ls1043aqds_nor_ddr3_defconfig +++ b/configs/ls1043aqds_nor_ddr3_defconfig @@ -25,6 +25,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -36,6 +38,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig index 1c7b27e3d7e..6ba6b420c03 100644 --- a/configs/ls1043aqds_qspi_defconfig +++ b/configs/ls1043aqds_qspi_defconfig @@ -25,6 +25,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -37,6 +39,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig index 699ac5b1050..21231cb416f 100644 --- a/configs/ls1043aqds_sdcard_ifc_defconfig +++ b/configs/ls1043aqds_sdcard_ifc_defconfig @@ -31,6 +31,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -46,13 +48,23 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x17000 +CONFIG_SPL_PAD_TO=0x1d000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x8f000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001e000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig index 78ff90d19e0..79914587277 100644 --- a/configs/ls1043aqds_sdcard_qspi_defconfig +++ b/configs/ls1043aqds_sdcard_qspi_defconfig @@ -30,6 +30,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -46,13 +48,23 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x17000 +CONFIG_SPL_PAD_TO=0x1d000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x8f000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001e000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig index 6f920ef8a88..9035594139d 100644 --- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig @@ -35,6 +35,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" # CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig index 031b5d8e753..6bf75006867 100644 --- a/configs/ls1043aqds_tfa_defconfig +++ b/configs/ls1043aqds_tfa_defconfig @@ -38,6 +38,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig index 65c336984e7..7f4729fe7df 100644 --- a/configs/ls1043ardb_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_SECURE_BOOT_defconfig @@ -14,6 +14,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" CONFIG_FSL_LS_PPA=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -23,6 +25,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig index c617716c53c..454f3dccbba 100644 --- a/configs/ls1043ardb_defconfig +++ b/configs/ls1043ardb_defconfig @@ -15,6 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" CONFIG_FSL_LS_PPA=y CONFIG_ENV_ADDR=0x60300000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -25,6 +27,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig index 750cc548998..401bc393b23 100644 --- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig @@ -16,6 +16,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -29,13 +31,25 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" # CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x1a000 +CONFIG_SPL_PAD_TO=0x20000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001d000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80200000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig index 78195de5ff1..3c5e5ce0ae8 100644 --- a/configs/ls1043ardb_nand_defconfig +++ b/configs/ls1043ardb_nand_defconfig @@ -20,6 +20,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -34,8 +36,18 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x1a000 +CONFIG_SPL_PAD_TO=0x20000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001d000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80200000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y @@ -43,6 +55,8 @@ CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig index 69d8d43c93d..9d29c365c6e 100644 --- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig @@ -17,6 +17,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -30,12 +32,22 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x17000 +CONFIG_SPL_PAD_TO=0x1d000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x8f000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001e000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_SPL=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index b05731df925..0c348615fa3 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -21,6 +21,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -35,13 +37,23 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x17000 +CONFIG_SPL_PAD_TO=0x1d000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x8f000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001e000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_SPL=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig index b08ba4f5c63..34f6952f43d 100644 --- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig @@ -24,6 +24,8 @@ CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig index 90623a7df99..5d361831959 100644 --- a/configs/ls1043ardb_tfa_defconfig +++ b/configs/ls1043ardb_tfa_defconfig @@ -27,6 +27,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y diff --git a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig index fddb02e556a..00444420b9d 100644 --- a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig @@ -22,6 +22,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y diff --git a/configs/ls1046afrwy_tfa_defconfig b/configs/ls1046afrwy_tfa_defconfig index 23ceb185f49..95ecf2adfb4 100644 --- a/configs/ls1046afrwy_tfa_defconfig +++ b/configs/ls1046afrwy_tfa_defconfig @@ -26,6 +26,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig index 902c14c7354..8b1713099d8 100644 --- a/configs/ls1046aqds_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_SECURE_BOOT_defconfig @@ -24,6 +24,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -34,6 +36,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig index f9616ef82dd..bf9f4803a99 100644 --- a/configs/ls1046aqds_defconfig +++ b/configs/ls1046aqds_defconfig @@ -25,6 +25,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -36,6 +38,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig index d1538829d1d..c4672d0366e 100644 --- a/configs/ls1046aqds_lpuart_defconfig +++ b/configs/ls1046aqds_lpuart_defconfig @@ -25,6 +25,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -36,6 +38,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig index b804ac41092..d63e5a53e4f 100644 --- a/configs/ls1046aqds_nand_defconfig +++ b/configs/ls1046aqds_nand_defconfig @@ -30,6 +30,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -45,8 +47,16 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run nand_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x17000 +CONFIG_SPL_PAD_TO=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x8f000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1001f000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y @@ -54,6 +64,8 @@ CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig index cb8a7a219ba..d62e5b611b3 100644 --- a/configs/ls1046aqds_qspi_defconfig +++ b/configs/ls1046aqds_qspi_defconfig @@ -25,6 +25,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -37,6 +39,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig index 48e58f6c103..0fa3ea1c360 100644 --- a/configs/ls1046aqds_sdcard_ifc_defconfig +++ b/configs/ls1046aqds_sdcard_ifc_defconfig @@ -31,6 +31,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -46,14 +48,24 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_PAD_TO=0x21000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x8f000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x10020000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig index bc548848245..e55712fce1f 100644 --- a/configs/ls1046aqds_sdcard_qspi_defconfig +++ b/configs/ls1046aqds_sdcard_qspi_defconfig @@ -30,6 +30,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -46,14 +48,24 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_PAD_TO=0x21000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x8f000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x10020000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig index e96cda3cef6..58bc95d91c3 100644 --- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig @@ -35,6 +35,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" # CONFIG_USE_BOOTCOMMAND is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig index 633399afc7b..881f1f1b636 100644 --- a/configs/ls1046aqds_tfa_defconfig +++ b/configs/ls1046aqds_tfa_defconfig @@ -38,6 +38,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig index 2c6772d28f6..9cba997eb43 100644 --- a/configs/ls1046ardb_emmc_defconfig +++ b/configs/ls1046ardb_emmc_defconfig @@ -22,6 +22,8 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -36,14 +38,24 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 # CONFIG_USE_BOOTCOMMAND is not set CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_PAD_TO=0x21000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x8f000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x10020000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig index b7ace80367b..2a7c730aa00 100644 --- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig @@ -16,6 +16,8 @@ CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -29,6 +31,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig index 78acce163bf..6f9a2e8ea29 100644 --- a/configs/ls1046ardb_qspi_defconfig +++ b/configs/ls1046ardb_qspi_defconfig @@ -18,6 +18,8 @@ CONFIG_QSPI_AHB_INIT=y CONFIG_ENV_ADDR=0x40300000 CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -32,6 +34,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig index 9d43c35439b..799d460f2bd 100644 --- a/configs/ls1046ardb_qspi_spl_defconfig +++ b/configs/ls1046ardb_qspi_spl_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -40,14 +42,26 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;;" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_PAD_TO=0x20000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x8f000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x10020000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x90000000 CONFIG_SYS_OS_BASE=0x40980000 CONFIG_SPL_WATCHDOG=y +CONFIG_SPL_TARGET="spl/u-boot-spl.pbl" +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_SPL=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig index af30b022c80..4301d38eb77 100644 --- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig @@ -21,6 +21,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -34,13 +36,23 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_BOOTCOMMAND="run distro_bootcmd;run sd_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_PAD_TO=0x21000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x8f000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x10020000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig index 40e343c2997..50efffa442f 100644 --- a/configs/ls1046ardb_sdcard_defconfig +++ b/configs/ls1046ardb_sdcard_defconfig @@ -22,6 +22,8 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -36,14 +38,24 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="run distro_bootcmd;run sd_bootcmd; env exists secureboot && esbc_halt;" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_PAD_TO=0x21000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x8f000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x10020000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig index 369b80a18df..62020ee6c89 100644 --- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig @@ -26,6 +26,8 @@ CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig index f126cb7036e..c0685777eac 100644 --- a/configs/ls1046ardb_tfa_defconfig +++ b/configs/ls1046ardb_tfa_defconfig @@ -29,6 +29,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_ARCH_MISC_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig index d1a6dc5ac45..1580ceb6b72 100644 --- a/configs/ls1088aqds_defconfig +++ b/configs/ls1088aqds_defconfig @@ -20,6 +20,8 @@ CONFIG_ENV_ADDR=0x80300000 CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -35,6 +37,8 @@ CONFIG_BOOTCOMMAND="fsl_mc lazyapply dpl 0x580d00000 && cp.b $kernel_start $kern CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig index 130af4a7fbf..b20a5d20f7d 100644 --- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig @@ -21,6 +21,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -34,6 +36,8 @@ CONFIG_BOOTCOMMAND="sf probe 0:0;sf read 0x80001000 0xd00000 0x100000; fsl_mc la # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig index eb3e51343e8..caf5d774f57 100644 --- a/configs/ls1088aqds_qspi_defconfig +++ b/configs/ls1088aqds_qspi_defconfig @@ -23,6 +23,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -36,6 +38,8 @@ CONFIG_BOOTCOMMAND="sf probe 0:0;sf read 0x80001000 0xd00000 0x100000; fsl_mc la # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig index 9725bbe3014..663aacf876b 100644 --- a/configs/ls1088aqds_sdcard_ifc_defconfig +++ b/configs/ls1088aqds_sdcard_ifc_defconfig @@ -26,6 +26,8 @@ CONFIG_SPL=y CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -39,12 +41,22 @@ CONFIG_BOOTCOMMAND="mmcinfo;mmc read 0x80001000 0x6800 0x800; fsl_mc lazyapply d # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x18009ff0 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig index 0c7a465f3bf..f3e204875ef 100644 --- a/configs/ls1088aqds_sdcard_qspi_defconfig +++ b/configs/ls1088aqds_sdcard_qspi_defconfig @@ -27,6 +27,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -40,11 +42,21 @@ CONFIG_BOOTCOMMAND="mmcinfo;mmc read 0x80001000 0x6800 0x800; fsl_mc lazyapply d # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x18009ff0 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig index fcd4757ab2e..a135de388ff 100644 --- a/configs/ls1088aqds_tfa_defconfig +++ b/configs/ls1088aqds_tfa_defconfig @@ -38,6 +38,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig index 4373a7bb84f..8571eec4619 100644 --- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig @@ -21,6 +21,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -35,6 +37,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig index 7d6340997f5..1cd59ec7e27 100644 --- a/configs/ls1088ardb_qspi_defconfig +++ b/configs/ls1088ardb_qspi_defconfig @@ -23,6 +23,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -37,6 +39,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig index 279e756f0f2..5b462a41c90 100644 --- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig @@ -26,6 +26,8 @@ CONFIG_SPL=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -40,11 +42,21 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x18009ff0 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig index cb390573a25..455fce3ed79 100644 --- a/configs/ls1088ardb_sdcard_qspi_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_defconfig @@ -27,6 +27,8 @@ CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0x9fffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -41,11 +43,21 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x18009ff0 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig index 42094a6b140..7354d4132dc 100644 --- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig @@ -36,6 +36,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig index 364fe1882ee..bb7e57691e7 100644 --- a/configs/ls1088ardb_tfa_defconfig +++ b/configs/ls1088ardb_tfa_defconfig @@ -38,6 +38,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_MEMINFO=y diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig index ff0550db53f..26d92f9d9b1 100644 --- a/configs/ls2080aqds_SECURE_BOOT_defconfig +++ b/configs/ls2080aqds_SECURE_BOOT_defconfig @@ -13,6 +13,8 @@ CONFIG_FSL_QIXIS=y # CONFIG_QIXIS_I2C_ACCESS is not set CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -25,6 +27,9 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load" CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig index 97eebb72748..f34501f5c2f 100644 --- a/configs/ls2080aqds_defconfig +++ b/configs/ls2080aqds_defconfig @@ -14,6 +14,8 @@ CONFIG_FSL_QIXIS=y CONFIG_FSL_LS_PPA=y CONFIG_ENV_ADDR=0x80300000 CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -26,6 +28,9 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load" CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig index e7b2cc4c802..dab9a7fb85a 100644 --- a/configs/ls2080aqds_nand_defconfig +++ b/configs/ls2080aqds_nand_defconfig @@ -18,6 +18,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT=y @@ -31,10 +33,21 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load" CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SPL_PAD_TO=0x20000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x18009ff0 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig index faa8f713b31..8d91394a02b 100644 --- a/configs/ls2080aqds_qspi_defconfig +++ b/configs/ls2080aqds_qspi_defconfig @@ -13,6 +13,8 @@ CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" CONFIG_FSL_USE_PCA9547_MUX=y CONFIG_FSL_QIXIS=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT=y @@ -26,6 +28,9 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load" CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig index 843c1e72ac7..3d6aa69d5f1 100644 --- a/configs/ls2080aqds_sdcard_defconfig +++ b/configs/ls2080aqds_sdcard_defconfig @@ -20,6 +20,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT_VERBOSE=y @@ -32,11 +34,21 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_BOOTCOMMAND="mmc read 0x80200000 0x6800 0x800; fsl_mc apply dpl 0x80200000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load" CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x18009ff0 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_I2C=y diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig index 0a36c795c81..6b59320f342 100644 --- a/configs/ls2080ardb_SECURE_BOOT_defconfig +++ b/configs/ls2080ardb_SECURE_BOOT_defconfig @@ -17,6 +17,8 @@ CONFIG_FSL_QIXIS=y # CONFIG_QIXIS_I2C_ACCESS is not set CONFIG_FSL_LS_PPA=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -30,6 +32,9 @@ CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="env exists mcinitcmd && env exists secureboot && esbc_validate 0x5806C0000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x580d00000;run distro_bootcmd;run nor_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig index 1001618f635..30efcaedbcb 100644 --- a/configs/ls2080ardb_defconfig +++ b/configs/ls2080ardb_defconfig @@ -18,6 +18,8 @@ CONFIG_FSL_QIXIS=y CONFIG_FSL_LS_PPA=y CONFIG_ENV_ADDR=0x80300000 CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -31,6 +33,9 @@ CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="env exists mcinitcmd && env exists secureboot && esbc_validate 0x5806C0000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x580d00000;run distro_bootcmd;run nor_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig index 505cdc19a3a..9fcc5d6647d 100644 --- a/configs/ls2080ardb_nand_defconfig +++ b/configs/ls2080ardb_nand_defconfig @@ -23,6 +23,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 CONFIG_REMAKE_ELF=y CONFIG_MP=y CONFIG_FIT=y @@ -37,10 +39,21 @@ CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="env exists mcinitcmd && env exists secureboot && esbc_validate 0x5806C0000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x580d00000;run distro_bootcmd;run nor_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SPL_PAD_TO=0x80000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x80100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x18009ff0 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y diff --git a/configs/ls2081ardb_defconfig b/configs/ls2081ardb_defconfig index dee04065025..64d638b9cff 100644 --- a/configs/ls2081ardb_defconfig +++ b/configs/ls2081ardb_defconfig @@ -18,6 +18,8 @@ CONFIG_FSL_QIXIS=y CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -32,6 +34,9 @@ CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_GPT=y diff --git a/configs/ls2088aqds_tfa_defconfig b/configs/ls2088aqds_tfa_defconfig index cd535babb54..3948edb77aa 100644 --- a/configs/ls2088aqds_tfa_defconfig +++ b/configs/ls2088aqds_tfa_defconfig @@ -29,6 +29,9 @@ CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig index 540d8e0f041..c5e81748b72 100644 --- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig @@ -17,6 +17,8 @@ CONFIG_VOL_MONITOR_IR36021_SET=y CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -29,6 +31,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig index df0244a8e5c..d88fc59211c 100644 --- a/configs/ls2088ardb_qspi_defconfig +++ b/configs/ls2088ardb_qspi_defconfig @@ -19,6 +19,8 @@ CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_ENV_ADDR=0x20300000 CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 # CONFIG_SYS_MALLOC_F is not set CONFIG_REMAKE_ELF=y CONFIG_MP=y @@ -33,6 +35,9 @@ CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21 CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;" CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_CMD_DM=y diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig index 2740f0c698e..b33754882f3 100644 --- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig @@ -33,6 +33,9 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y diff --git a/configs/ls2088ardb_tfa_defconfig b/configs/ls2088ardb_tfa_defconfig index 004c557923a..0d912219fa8 100644 --- a/configs/ls2088ardb_tfa_defconfig +++ b/configs/ls2088ardb_tfa_defconfig @@ -35,6 +35,9 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x16000 +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig index 181fb3e3458..4fe9f6d3a6b 100644 --- a/configs/lschlv2_defconfig +++ b/configs/lschlv2_defconfig @@ -15,6 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-lschlv2" CONFIG_IDENT_STRING=" LS-CHLv2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_API=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_BOOTDELAY=3 @@ -26,6 +28,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_FLASH is not set CONFIG_CMD_SATA=y CONFIG_CMD_SPI=y diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig index 8c92ba2d2d2..e57f93ebd14 100644 --- a/configs/lsxhl_defconfig +++ b/configs/lsxhl_defconfig @@ -16,6 +16,8 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-lsxhl" CONFIG_IDENT_STRING=" LS-XHL" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_API=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_BOOTDELAY=3 @@ -27,6 +29,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_FLASH is not set CONFIG_CMD_SATA=y CONFIG_CMD_SPI=y diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig index f00d21fcc1e..abb095d98ac 100644 --- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig @@ -34,6 +34,8 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x2 CONFIG_BOARD_EARLY_INIT_R=y CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig index 32ea3cb387d..e8ae5af0ade 100644 --- a/configs/lx2160aqds_tfa_defconfig +++ b/configs/lx2160aqds_tfa_defconfig @@ -37,6 +37,8 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x2 CONFIG_BOARD_EARLY_INIT_R=y CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig index cd19663829c..d7ebf896fbe 100644 --- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig @@ -34,6 +34,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf" CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig index ee63ccdf460..d3cfb1fea52 100644 --- a/configs/lx2160ardb_tfa_defconfig +++ b/configs/lx2160ardb_tfa_defconfig @@ -37,6 +37,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf" CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 diff --git a/configs/lx2160ardb_tfa_stmm_defconfig b/configs/lx2160ardb_tfa_stmm_defconfig index ce106fb018f..5589c48beff 100644 --- a/configs/lx2160ardb_tfa_stmm_defconfig +++ b/configs/lx2160ardb_tfa_stmm_defconfig @@ -37,6 +37,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf" CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_EEPROM=y diff --git a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig index 0d8ac1c9b47..d0f92f8e2c0 100644 --- a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig @@ -35,6 +35,8 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 diff --git a/configs/lx2162aqds_tfa_defconfig b/configs/lx2162aqds_tfa_defconfig index a13abd29a76..df437a6bebc 100644 --- a/configs/lx2162aqds_tfa_defconfig +++ b/configs/lx2162aqds_tfa_defconfig @@ -38,6 +38,8 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 diff --git a/configs/lx2162aqds_tfa_verified_boot_defconfig b/configs/lx2162aqds_tfa_verified_boot_defconfig index 114bc6ee728..c48c8a3ffb9 100644 --- a/configs/lx2162aqds_tfa_verified_boot_defconfig +++ b/configs/lx2162aqds_tfa_verified_boot_defconfig @@ -39,6 +39,8 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_MISC_INIT_R=y CONFIG_ID_EEPROM=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig index 90d3e59e57d..2ccea8315c7 100644 --- a/configs/m53menlo_defconfig +++ b/configs/m53menlo_defconfig @@ -31,9 +31,16 @@ CONFIG_BOOTCOMMAND="run mmc_mmc" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run try_bootscript" CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_PAD_TO=0x8000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x70004000 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-nand-spl.imx" CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=1024 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DM=y diff --git a/configs/malta64_defconfig b/configs/malta64_defconfig index 88d3cbea8e9..cbea4fadff7 100644 --- a/configs/malta64_defconfig +++ b/configs/malta64_defconfig @@ -12,8 +12,11 @@ CONFIG_CPU_MIPS64_R2=y # CONFIG_AUTOBOOT is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="malta # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_IMLS=y CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set diff --git a/configs/malta64el_defconfig b/configs/malta64el_defconfig index d4f043ebf29..b268e33a379 100644 --- a/configs/malta64el_defconfig +++ b/configs/malta64el_defconfig @@ -14,8 +14,11 @@ CONFIG_CPU_MIPS64_R2=y # CONFIG_AUTOBOOT is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="maltael # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=283 CONFIG_CMD_IMLS=y CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set diff --git a/configs/malta_defconfig b/configs/malta_defconfig index 2002425f378..7b1b50547a4 100644 --- a/configs/malta_defconfig +++ b/configs/malta_defconfig @@ -11,8 +11,11 @@ CONFIG_TARGET_MALTA=y # CONFIG_AUTOBOOT is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="malta # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_IMLS=y CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig index 2c6f99e96bf..540864b5732 100644 --- a/configs/maltael_defconfig +++ b/configs/maltael_defconfig @@ -13,8 +13,11 @@ CONFIG_SYS_LITTLE_ENDIAN=y # CONFIG_AUTOBOOT is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="maltael # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=283 CONFIG_CMD_IMLS=y CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig index f3e83668465..c7212ebcd3b 100644 --- a/configs/marsboard_defconfig +++ b/configs/marsboard_defconfig @@ -20,6 +20,8 @@ CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/maxbcm_defconfig b/configs/maxbcm_defconfig index c325dd7cb27..35005fcc354 100644 --- a/configs/maxbcm_defconfig +++ b/configs/maxbcm_defconfig @@ -17,12 +17,22 @@ CONFIG_DEBUG_UART_BASE=0xf1012000 CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_BOOTDELAY=3 CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x1bfd0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x40020000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4002c000 CONFIG_SPL_I2C=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_I2C=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig index 44c97c15a3f..80b59cbb053 100644 --- a/configs/mccmon6_nor_defconfig +++ b/configs/mccmon6_nor_defconfig @@ -24,11 +24,15 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 CONFIG_SYS_OS_BASE=0x8180000 +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NOR_OFS=0x09600000 CONFIG_CMD_SPL_WRITE_SIZE=0x20000 @@ -58,6 +62,7 @@ CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig index 4c719337eea..6984256a1c2 100644 --- a/configs/mccmon6_sd_defconfig +++ b/configs/mccmon6_sd_defconfig @@ -25,8 +25,11 @@ CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NOR_OFS=0x09600000 CONFIG_CMD_SPL_WRITE_SIZE=0x20000 @@ -56,6 +59,7 @@ CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index d1eedc6aa88..dd402f286ba 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -13,7 +13,17 @@ CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2089 # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/meerkat96_defconfig b/configs/meerkat96_defconfig index 930c998b7e7..4fdcdafac20 100644 --- a/configs/meerkat96_defconfig +++ b/configs/meerkat96_defconfig @@ -15,6 +15,8 @@ CONFIG_IMX_BOOTAUX=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0xa0000000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/meesc_dataflash_defconfig b/configs/meesc_dataflash_defconfig index e636a3199ae..315c4841825 100644 --- a/configs/meesc_dataflash_defconfig +++ b/configs/meesc_dataflash_defconfig @@ -18,6 +18,8 @@ CONFIG_USE_PREBOOT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_LOADS is not set diff --git a/configs/meesc_defconfig b/configs/meesc_defconfig index c549fa232fa..9246f095254 100644 --- a/configs/meesc_defconfig +++ b/configs/meesc_defconfig @@ -17,6 +17,8 @@ CONFIG_USE_PREBOOT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_LOADS is not set diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig index 3142b469c26..8ece12630fb 100644 --- a/configs/microblaze-generic_defconfig +++ b/configs/microblaze-generic_defconfig @@ -24,12 +24,20 @@ CONFIG_PREBOOT="echo U-BOOT for ${hostname};setenv preboot;echo" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_DISPLAY_BOARDINFO=y CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0xffb00 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x100000 CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x2a000000 CONFIG_SYS_OS_BASE=0x2c060000 CONFIG_SYS_PROMPT="U-Boot-mONStR> " +CONFIG_SYS_MAXARGS=15 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=544 CONFIG_CMD_IMLS=y CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y diff --git a/configs/microchip_mpfs_icicle_defconfig b/configs/microchip_mpfs_icicle_defconfig index 6cae07a1d1a..462c8b7f291 100644 --- a/configs/microchip_mpfs_icicle_defconfig +++ b/configs/microchip_mpfs_icicle_defconfig @@ -8,10 +8,14 @@ CONFIG_TARGET_MICROCHIP_ICICLE=y CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_FIT=y CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y CONFIG_SYS_PROMPT="RISC-V # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_BOOTP_SEND_HOSTNAME=y CONFIG_DM_MTD=y diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index c051e00a6ab..87eb82a79af 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -32,6 +32,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/miqi-rk3288_defconfig b/configs/miqi-rk3288_defconfig index c5af739fa48..7000b89311a 100644 --- a/configs/miqi-rk3288_defconfig +++ b/configs/miqi-rk3288_defconfig @@ -15,11 +15,17 @@ CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-miqi.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_CMD_GPIO=y diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig index 0e4cdc44670..11e3dfcf4ba 100644 --- a/configs/mixtile_loftq_defconfig +++ b/configs/mixtile_loftq_defconfig @@ -9,6 +9,8 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PH24" CONFIG_USB2_VBUS_PIN="" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_PHY_REALTEK=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig index 21f7a6e535d..3ce7e5f1d68 100644 --- a/configs/mk802_a10s_defconfig +++ b/configs/mk802_a10s_defconfig @@ -7,7 +7,9 @@ CONFIG_DRAM_CLK=432 CONFIG_DRAM_EMR1=0 CONFIG_USB1_VBUS_PIN="PB10" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig index 416565e5af2..0fd8d3adbd2 100644 --- a/configs/mk802_defconfig +++ b/configs/mk802_defconfig @@ -5,6 +5,8 @@ CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_USB2_VBUS_PIN="PH12" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig index 965a9cd5c4b..942911bddba 100644 --- a/configs/mk802ii_defconfig +++ b/configs/mk802ii_defconfig @@ -4,7 +4,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii" CONFIG_SPL=y CONFIG_MACH_SUN4I=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/mk808_defconfig b/configs/mk808_defconfig index 20bca75adfc..7df44fb81f1 100644 --- a/configs/mk808_defconfig +++ b/configs/mk808_defconfig @@ -16,7 +16,6 @@ CONFIG_SPL_TEXT_BASE=0x60000000 CONFIG_ROCKCHIP_RK3066=y # CONFIG_ROCKCHIP_STIMER is not set CONFIG_TPL_TEXT_BASE=0x10080C04 -CONFIG_TPL_MAX_SIZE=32764 CONFIG_TPL_STACK=0x1008FFFF CONFIG_TARGET_MK808=y CONFIG_SPL_STACK_R_ADDR=0x70000000 @@ -26,18 +25,28 @@ CONFIG_SPL_FS_FAT=y CONFIG_SYS_LOAD_ADDR=0x70800800 CONFIG_SPL_PAYLOAD="u-boot.bin" CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x78000000 CONFIG_SD_BOOT=y CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3066a-mk808.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x32000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x1008ffff CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x200000 CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_FS_EXT4=y CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=2 CONFIG_TPL_NEEDS_SEPARATE_STACK=y +CONFIG_TPL_MAX_SIZE=0x7ffc +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set # CONFIG_BOOTM_VXWORKS is not set diff --git a/configs/mscc_jr2_defconfig b/configs/mscc_jr2_defconfig index 1b77a08a93c..e48d4a8d8fe 100644 --- a/configs/mscc_jr2_defconfig +++ b/configs/mscc_jr2_defconfig @@ -26,6 +26,8 @@ CONFIG_BOARD_TYPES=y CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_SYS_PROMPT="jr2 # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=279 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_ELF is not set diff --git a/configs/mscc_luton_defconfig b/configs/mscc_luton_defconfig index 502c8ef61c5..1a2db895d02 100644 --- a/configs/mscc_luton_defconfig +++ b/configs/mscc_luton_defconfig @@ -28,6 +28,8 @@ CONFIG_BOARD_TYPES=y CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_SYS_PROMPT="luton # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_ELF is not set diff --git a/configs/mscc_ocelot_defconfig b/configs/mscc_ocelot_defconfig index f3f8eb38473..d05a26df31d 100644 --- a/configs/mscc_ocelot_defconfig +++ b/configs/mscc_ocelot_defconfig @@ -25,6 +25,8 @@ CONFIG_BOARD_TYPES=y CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_SYS_PROMPT="ocelot # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_ELF is not set diff --git a/configs/mscc_serval_defconfig b/configs/mscc_serval_defconfig index 9bc94ebbb87..a56c5ebdecf 100644 --- a/configs/mscc_serval_defconfig +++ b/configs/mscc_serval_defconfig @@ -23,6 +23,8 @@ CONFIG_BOARD_TYPES=y CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_SYS_PROMPT="serval # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_ELF is not set diff --git a/configs/mscc_servalt_defconfig b/configs/mscc_servalt_defconfig index f861b4713d8..cf1c4db1d38 100644 --- a/configs/mscc_servalt_defconfig +++ b/configs/mscc_servalt_defconfig @@ -22,6 +22,8 @@ CONFIG_BOARD_TYPES=y CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_SYS_PROMPT="servalt # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=283 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_ELF is not set diff --git a/configs/mt7620_mt7530_rfb_defconfig b/configs/mt7620_mt7530_rfb_defconfig index af1282c9904..9e409b60b27 100644 --- a/configs/mt7620_mt7530_rfb_defconfig +++ b/configs/mt7620_mt7530_rfb_defconfig @@ -23,6 +23,10 @@ CONFIG_MIPS_BOOT_FDT=y CONFIG_DEBUG_UART=y CONFIG_FIT=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_BSS_START_ADDR=0x80010000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_NOR_SUPPORT=y # CONFIG_CMD_ELF is not set diff --git a/configs/mt7620_rfb_defconfig b/configs/mt7620_rfb_defconfig index ac7a56ef1ea..f3f5e3a8871 100644 --- a/configs/mt7620_rfb_defconfig +++ b/configs/mt7620_rfb_defconfig @@ -22,6 +22,10 @@ CONFIG_MIPS_BOOT_FDT=y CONFIG_DEBUG_UART=y CONFIG_FIT=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_BSS_START_ADDR=0x80010000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_NOR_SUPPORT=y # CONFIG_CMD_ELF is not set diff --git a/configs/mt7622_rfb_defconfig b/configs/mt7622_rfb_defconfig index 90e8d774ce6..c2df7172296 100644 --- a/configs/mt7622_rfb_defconfig +++ b/configs/mt7622_rfb_defconfig @@ -14,6 +14,8 @@ CONFIG_DEFAULT_FDT_FILE="mt7622-rfb" CONFIG_LOGLEVEL=7 CONFIG_LOG=y CONFIG_SYS_PROMPT="MT7622> " +CONFIG_SYS_MAXARGS=8 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_BOOTMENU=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y diff --git a/configs/mt7623a_unielec_u7623_02_defconfig b/configs/mt7623a_unielec_u7623_02_defconfig index 8b21afb06d8..06e85c2f57d 100644 --- a/configs/mt7623a_unielec_u7623_02_defconfig +++ b/configs/mt7623a_unielec_u7623_02_defconfig @@ -10,6 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="mt7623a-unielec-u7623-02-emmc" CONFIG_TARGET_MT7623=y CONFIG_SYS_LOAD_ADDR=0x84000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x81ffff10 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_BOOTDELAY=3 @@ -17,6 +19,8 @@ CONFIG_DEFAULT_FDT_FILE="mt7623a-unielec-u7623-02-emmc.dtb" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_MAXARGS=8 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/mt7623n_bpir2_defconfig b/configs/mt7623n_bpir2_defconfig index 677e192bcb4..4320fe5bb62 100644 --- a/configs/mt7623n_bpir2_defconfig +++ b/configs/mt7623n_bpir2_defconfig @@ -10,6 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="mt7623n-bananapi-bpi-r2" CONFIG_TARGET_MT7623=y CONFIG_SYS_LOAD_ADDR=0x84000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x81ffff10 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_BOOTDELAY=3 @@ -17,6 +19,8 @@ CONFIG_DEFAULT_FDT_FILE="mt7623n-bananapi-bpi-r2.dtb" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_MAXARGS=8 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/mt7628_rfb_defconfig b/configs/mt7628_rfb_defconfig index 5862295871b..7690213ab80 100644 --- a/configs/mt7628_rfb_defconfig +++ b/configs/mt7628_rfb_defconfig @@ -22,6 +22,10 @@ CONFIG_MIPS_BOOT_FDT=y CONFIG_FIT=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_BSS_START_ADDR=0x80010000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_NOR_SUPPORT=y # CONFIG_CMD_ELF is not set diff --git a/configs/mt7629_rfb_defconfig b/configs/mt7629_rfb_defconfig index 4d47b47be49..f5e3c26d66c 100644 --- a/configs/mt7629_rfb_defconfig +++ b/configs/mt7629_rfb_defconfig @@ -15,6 +15,8 @@ CONFIG_SPL_STACK_R_ADDR=0x40800000 CONFIG_SYS_LOAD_ADDR=0x42007f1c CONFIG_SPL_PAYLOAD="u-boot-lzma.img" CONFIG_BUILD_TARGET="u-boot-mtk.bin" +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41fffef0 CONFIG_SPL_IMAGE="spl/u-boot-spl-mtk.bin" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -22,12 +24,19 @@ CONFIG_BOOTDELAY=3 CONFIG_DEFAULT_FDT_FILE="mt7629-rfb" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x10000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x106000 CONFIG_SPL_STACK_R=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_MAXARGS=8 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_ELF is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/mt8183_pumpkin_defconfig b/configs/mt8183_pumpkin_defconfig index ea7ab5c8096..ab2a9c7efa1 100644 --- a/configs/mt8183_pumpkin_defconfig +++ b/configs/mt8183_pumpkin_defconfig @@ -23,6 +23,8 @@ CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="mt8183-pumpkin" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/mt8512_bm1_emmc_defconfig b/configs/mt8512_bm1_emmc_defconfig index 7e711b1b469..4e7b8fbdd35 100644 --- a/configs/mt8512_bm1_emmc_defconfig +++ b/configs/mt8512_bm1_emmc_defconfig @@ -15,6 +15,8 @@ CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_DEFAULT_FDT_FILE="mt8512-bm1-emmc.dtb" CONFIG_SYS_PROMPT="MT8512> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTMENU=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/mt8516_pumpkin_defconfig b/configs/mt8516_pumpkin_defconfig index 52c12609b15..0425ffd0f97 100644 --- a/configs/mt8516_pumpkin_defconfig +++ b/configs/mt8516_pumpkin_defconfig @@ -22,6 +22,8 @@ CONFIG_DEFAULT_FDT_FILE="mt8516-pumpkin" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/mt8518_ap1_emmc_defconfig b/configs/mt8518_ap1_emmc_defconfig index a994cd3a2da..8a2ddabcda7 100644 --- a/configs/mt8518_ap1_emmc_defconfig +++ b/configs/mt8518_ap1_emmc_defconfig @@ -15,6 +15,8 @@ CONFIG_FIT_SIGNATURE=y CONFIG_DEFAULT_FDT_FILE="mt8518-ap1-emmc.dtb" CONFIG_BOARD_LATE_INIT=y CONFIG_SYS_PROMPT="MT8518> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTMENU=y CONFIG_CMD_MMC=y CONFIG_EFI_PARTITION=y diff --git a/configs/mvebu_crb_cn9130_defconfig b/configs/mvebu_crb_cn9130_defconfig index e4a786c011c..86e8b75e61b 100644 --- a/configs/mvebu_crb_cn9130_defconfig +++ b/configs/mvebu_crb_cn9130_defconfig @@ -13,6 +13,8 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y @@ -22,6 +24,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_EARLY_INIT_R=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="Marvell>> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1051 CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_MTD=y diff --git a/configs/mvebu_db-88f3720_defconfig b/configs/mvebu_db-88f3720_defconfig index ff891150d24..7b7382216ba 100644 --- a/configs/mvebu_db-88f3720_defconfig +++ b/configs/mvebu_db-88f3720_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_LOAD_ADDR=0x6000000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y @@ -23,6 +25,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_EARLY_INIT_R=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_FLASH is not set CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y diff --git a/configs/mvebu_db_armada8k_defconfig b/configs/mvebu_db_armada8k_defconfig index ddbce1b52c4..0b4afbe59e8 100644 --- a/configs/mvebu_db_armada8k_defconfig +++ b/configs/mvebu_db_armada8k_defconfig @@ -14,6 +14,8 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y @@ -22,6 +24,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_EARLY_INIT_R=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y diff --git a/configs/mvebu_db_cn9130_defconfig b/configs/mvebu_db_cn9130_defconfig index 64f3f2f3432..9f6196095b3 100644 --- a/configs/mvebu_db_cn9130_defconfig +++ b/configs/mvebu_db_cn9130_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y @@ -24,6 +26,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_EARLY_INIT_R=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="Marvell>> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1051 CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_MTD=y diff --git a/configs/mvebu_espressobin-88f3720_defconfig b/configs/mvebu_espressobin-88f3720_defconfig index 8d7d57ff1bc..8368e4c028b 100644 --- a/configs/mvebu_espressobin-88f3720_defconfig +++ b/configs/mvebu_espressobin-88f3720_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_LOAD_ADDR=0x6000000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y @@ -26,6 +28,7 @@ CONFIG_ARCH_EARLY_INIT_R=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y CONFIG_LAST_STAGE_INIT=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_FLASH is not set CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y diff --git a/configs/mvebu_mcbin-88f8040_defconfig b/configs/mvebu_mcbin-88f8040_defconfig index e8095d4cedf..be4bbe87ca2 100644 --- a/configs/mvebu_mcbin-88f8040_defconfig +++ b/configs/mvebu_mcbin-88f8040_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y @@ -23,6 +25,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_EARLY_INIT_R=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/mvebu_puzzle-m801-88f8040_defconfig b/configs/mvebu_puzzle-m801-88f8040_defconfig index 1c773458dce..c05beef8f94 100644 --- a/configs/mvebu_puzzle-m801-88f8040_defconfig +++ b/configs/mvebu_puzzle-m801-88f8040_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n" @@ -27,6 +29,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_EARLY_INIT_R=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/mx23_olinuxino_defconfig b/configs/mx23_olinuxino_defconfig index ff656c5efd1..d1d983d0f03 100644 --- a/configs/mx23_olinuxino_defconfig +++ b/configs/mx23_olinuxino_defconfig @@ -21,8 +21,10 @@ CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_NO_CPU_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/mx23evk_defconfig b/configs/mx23evk_defconfig index 41c5b37d0af..fbd999236c1 100644 --- a/configs/mx23evk_defconfig +++ b/configs/mx23evk_defconfig @@ -22,8 +22,10 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_NO_CPU_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y diff --git a/configs/mx28evk_auart_console_defconfig b/configs/mx28evk_auart_console_defconfig index af9ff194187..28a81e476c5 100644 --- a/configs/mx28evk_auart_console_defconfig +++ b/configs/mx28evk_auart_console_defconfig @@ -19,8 +19,10 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_NO_CPU_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig index 3a9c7ff5417..b4e7d0d29fe 100644 --- a/configs/mx28evk_defconfig +++ b/configs/mx28evk_defconfig @@ -23,8 +23,10 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_NO_CPU_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/mx28evk_nand_defconfig b/configs/mx28evk_nand_defconfig index 7ffdb817e19..749c6481c2f 100644 --- a/configs/mx28evk_nand_defconfig +++ b/configs/mx28evk_nand_defconfig @@ -20,8 +20,10 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_NO_CPU_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/mx28evk_spi_defconfig b/configs/mx28evk_spi_defconfig index 1bac5851435..35fac909317 100644 --- a/configs/mx28evk_spi_defconfig +++ b/configs/mx28evk_spi_defconfig @@ -18,8 +18,10 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_NO_CPU_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig index e3b6c64c087..8bd32003812 100644 --- a/configs/mx51evk_defconfig +++ b/configs/mx51evk_defconfig @@ -18,6 +18,8 @@ CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y CONFIG_CMD_FUSE=y diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig index f79595db688..8d5c76f69e4 100644 --- a/configs/mx53cx9020_defconfig +++ b/configs/mx53cx9020_defconfig @@ -13,6 +13,7 @@ CONFIG_SYS_LOAD_ADDR=0x70010000 CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=1 CONFIG_USE_PREBOOT=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig index 7cf959beec7..bede23dccc0 100644 --- a/configs/mx53loco_defconfig +++ b/configs/mx53loco_defconfig @@ -23,6 +23,7 @@ CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y CONFIG_CMD_MMC=y diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index e4eddef15ab..c92e89c612b 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -22,6 +22,8 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_LATE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=48 +CONFIG_SYS_CBSIZE=1024 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y CONFIG_CMD_FUSE=y diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig index 1e2e332af9e..d68335b5b68 100644 --- a/configs/mx6cuboxi_defconfig +++ b/configs/mx6cuboxi_defconfig @@ -26,9 +26,13 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin serial,usbkbd; setenv stdout serial,vidconsole; setenv stderr serial,vidconsole; else setenv stdin serial; setenv stdout serial; setenv stderr serial; fi;" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y # CONFIG_CMD_PINMUX is not set diff --git a/configs/mx6memcal_defconfig b/configs/mx6memcal_defconfig index b2185172bb6..a1bc95bb4a1 100644 --- a/configs/mx6memcal_defconfig +++ b/configs/mx6memcal_defconfig @@ -15,9 +15,12 @@ CONFIG_SPL=y CONFIG_SYS_MEMTEST_START=0x10000000 CONFIG_SYS_MEMTEST_END=0x20000000 CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=528 # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_BOOTM is not set # CONFIG_CMD_ELF is not set diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig index 472758ac889..551057fcfa2 100644 --- a/configs/mx6qsabrelite_defconfig +++ b/configs/mx6qsabrelite_defconfig @@ -25,6 +25,8 @@ CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y # CONFIG_CMD_FLASH is not set diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig index 053026daa31..900fbf7ca71 100644 --- a/configs/mx6sabreauto_defconfig +++ b/configs/mx6sabreauto_defconfig @@ -33,14 +33,18 @@ CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};if mmc rescan; then if run loa CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index 674384c8785..15dbaf848cd 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -32,12 +32,15 @@ CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};if mmc rescan; then if run loa CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_SPL=y CONFIG_CMD_SPL_WRITE_SIZE=0x20000 diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index 79057f7f4c1..34f9b06deef 100644 --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -15,6 +15,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig index 2f9026287fc..5e54fd3eac4 100644 --- a/configs/mx6slevk_spinor_defconfig +++ b/configs/mx6slevk_spinor_defconfig @@ -17,6 +17,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/mx6slevk_spl_defconfig b/configs/mx6slevk_spl_defconfig index 5a43a5501ce..c05c33d0df8 100644 --- a/configs/mx6slevk_spl_defconfig +++ b/configs/mx6slevk_spl_defconfig @@ -25,10 +25,14 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/mx6sllevk_defconfig b/configs/mx6sllevk_defconfig index b949b5e30c0..ec6843e5743 100644 --- a/configs/mx6sllevk_defconfig +++ b/configs/mx6sllevk_defconfig @@ -17,6 +17,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/mx6sllevk_plugin_defconfig b/configs/mx6sllevk_plugin_defconfig index 3fea1b17faa..bd44298cb29 100644 --- a/configs/mx6sllevk_plugin_defconfig +++ b/configs/mx6sllevk_plugin_defconfig @@ -18,6 +18,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/mx6sxsabreauto_defconfig b/configs/mx6sxsabreauto_defconfig index 30194a8cde4..d32ea1ea3ca 100644 --- a/configs/mx6sxsabreauto_defconfig +++ b/configs/mx6sxsabreauto_defconfig @@ -14,6 +14,8 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig index b5b0b374f2e..c41b2d9264e 100644 --- a/configs/mx6sxsabresd_defconfig +++ b/configs/mx6sxsabresd_defconfig @@ -16,6 +16,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run findfdt; mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/mx6ul_14x14_evk_defconfig b/configs/mx6ul_14x14_evk_defconfig index 1e1e799eb38..10f6b4f099a 100644 --- a/configs/mx6ul_14x14_evk_defconfig +++ b/configs/mx6ul_14x14_evk_defconfig @@ -27,13 +27,17 @@ CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc resc # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/mx6ul_9x9_evk_defconfig b/configs/mx6ul_9x9_evk_defconfig index 4b90fcad261..de77e4fed6d 100644 --- a/configs/mx6ul_9x9_evk_defconfig +++ b/configs/mx6ul_9x9_evk_defconfig @@ -27,10 +27,14 @@ CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc resc # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/mx6ull_14x14_evk_defconfig b/configs/mx6ull_14x14_evk_defconfig index ec526b6e4f8..c48fd4adae0 100644 --- a/configs/mx6ull_14x14_evk_defconfig +++ b/configs/mx6ull_14x14_evk_defconfig @@ -16,6 +16,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/mx6ull_14x14_evk_plugin_defconfig b/configs/mx6ull_14x14_evk_plugin_defconfig index ec2a537581d..a9b7eb4aaff 100644 --- a/configs/mx6ull_14x14_evk_plugin_defconfig +++ b/configs/mx6ull_14x14_evk_plugin_defconfig @@ -17,6 +17,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/mx6ulz_14x14_evk_defconfig b/configs/mx6ulz_14x14_evk_defconfig index 0a7002d936e..a3afd12d2cb 100644 --- a/configs/mx6ulz_14x14_evk_defconfig +++ b/configs/mx6ulz_14x14_evk_defconfig @@ -16,6 +16,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig index d8c5dbcc93a..0de958b621b 100644 --- a/configs/mx7dsabresd_defconfig +++ b/configs/mx7dsabresd_defconfig @@ -16,6 +16,8 @@ CONFIG_SYS_MEMTEST_END=0xa0000000 CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set diff --git a/configs/mx7dsabresd_qspi_defconfig b/configs/mx7dsabresd_qspi_defconfig index 7aa35791089..c52f45a9749 100644 --- a/configs/mx7dsabresd_qspi_defconfig +++ b/configs/mx7dsabresd_qspi_defconfig @@ -15,6 +15,8 @@ CONFIG_SYS_MEMTEST_END=0xa0000000 CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set diff --git a/configs/mx7ulp_com_defconfig b/configs/mx7ulp_com_defconfig index b9154a9e3c6..5b3b332f10d 100644 --- a/configs/mx7ulp_com_defconfig +++ b/configs/mx7ulp_com_defconfig @@ -17,6 +17,8 @@ CONFIG_BOOTCOMMAND="if run loadimage; then run mmcboot; fi" CONFIG_DEFAULT_FDT_FILE="imx7ulp-com" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig index 12c89b5be96..6a22040c035 100644 --- a/configs/mx7ulp_evk_defconfig +++ b/configs/mx7ulp_evk_defconfig @@ -17,6 +17,9 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=256 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_FUSE=y diff --git a/configs/mx7ulp_evk_plugin_defconfig b/configs/mx7ulp_evk_plugin_defconfig index cec1a878714..ea03eb37717 100644 --- a/configs/mx7ulp_evk_plugin_defconfig +++ b/configs/mx7ulp_evk_plugin_defconfig @@ -16,6 +16,9 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=256 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_MEMTEST=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y diff --git a/configs/myir_mys_6ulx_defconfig b/configs/myir_mys_6ulx_defconfig index 4f99042b51a..f748b4dd66b 100644 --- a/configs/myir_mys_6ulx_defconfig +++ b/configs/myir_mys_6ulx_defconfig @@ -19,11 +19,14 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_MEMTEST=y CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig index 31de4bd1a94..15ab46e5e12 100644 --- a/configs/nanopc-t4-rk3399_defconfig +++ b/configs/nanopc-t4-rk3399_defconfig @@ -12,9 +12,18 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig index f7d8f788c69..dafbf16cb82 100644 --- a/configs/nanopi-k2_defconfig +++ b/configs/nanopi-k2_defconfig @@ -10,10 +10,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" nanopi-k2" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/nanopi-m4-2gb-rk3399_defconfig b/configs/nanopi-m4-2gb-rk3399_defconfig index 7c8eff869b6..93dafb86422 100644 --- a/configs/nanopi-m4-2gb-rk3399_defconfig +++ b/configs/nanopi-m4-2gb-rk3399_defconfig @@ -12,9 +12,18 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4-2gb.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig index d500ebe58dc..b5d9f4184d6 100644 --- a/configs/nanopi-m4-rk3399_defconfig +++ b/configs/nanopi-m4-rk3399_defconfig @@ -12,9 +12,18 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/nanopi-m4b-rk3399_defconfig b/configs/nanopi-m4b-rk3399_defconfig index 16e39035e5e..c4b51adb6e1 100644 --- a/configs/nanopi-m4b-rk3399_defconfig +++ b/configs/nanopi-m4b-rk3399_defconfig @@ -12,9 +12,18 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4b.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig index 753ba92d0ed..2bc066887fa 100644 --- a/configs/nanopi-neo4-rk3399_defconfig +++ b/configs/nanopi-neo4-rk3399_defconfig @@ -12,9 +12,18 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-neo4.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/nanopi-r2s-rk3328_defconfig b/configs/nanopi-r2s-rk3328_defconfig index 453e54295de..99a99e1292b 100644 --- a/configs/nanopi-r2s-rk3328_defconfig +++ b/configs/nanopi-r2s-rk3328_defconfig @@ -17,6 +17,8 @@ CONFIG_DEBUG_UART_BASE=0xFF130000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y @@ -26,13 +28,21 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-nanopi-r2s.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x2000000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_TPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_TPL_MAX_SIZE=0x40000 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/nanopi-r4s-rk3399_defconfig b/configs/nanopi-r4s-rk3399_defconfig index 46ba07f4d55..917fd3fd8eb 100644 --- a/configs/nanopi-r4s-rk3399_defconfig +++ b/configs/nanopi-r4s-rk3399_defconfig @@ -12,9 +12,18 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/nanopi_a64_defconfig b/configs/nanopi_a64_defconfig index 70fc257eebd..8f3c242a7a9 100644 --- a/configs/nanopi_a64_defconfig +++ b/configs/nanopi_a64_defconfig @@ -5,6 +5,8 @@ CONFIG_SPL=y CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/nanopi_m1_defconfig b/configs/nanopi_m1_defconfig index dc2dbd62900..47a6b7804e3 100644 --- a/configs/nanopi_m1_defconfig +++ b/configs/nanopi_m1_defconfig @@ -5,5 +5,7 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=408 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/nanopi_m1_plus_defconfig b/configs/nanopi_m1_plus_defconfig index 37b7817d869..c71d721f743 100644 --- a/configs/nanopi_m1_plus_defconfig +++ b/configs/nanopi_m1_plus_defconfig @@ -8,6 +8,8 @@ CONFIG_MACPWR="PD6" CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/nanopi_neo2_defconfig b/configs/nanopi_neo2_defconfig index 95dd56aa04c..66df94b33b9 100644 --- a/configs/nanopi_neo2_defconfig +++ b/configs/nanopi_neo2_defconfig @@ -7,6 +7,8 @@ CONFIG_DRAM_CLK=672 CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig index 806d95c1cc7..b83b6a3499d 100644 --- a/configs/nanopi_neo_air_defconfig +++ b/configs/nanopi_neo_air_defconfig @@ -7,5 +7,7 @@ CONFIG_DRAM_CLK=408 # CONFIG_VIDEO_DE2 is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/nanopi_neo_defconfig b/configs/nanopi_neo_defconfig index c0255196384..f8377535e97 100644 --- a/configs/nanopi_neo_defconfig +++ b/configs/nanopi_neo_defconfig @@ -7,6 +7,8 @@ CONFIG_DRAM_CLK=408 # CONFIG_VIDEO_DE2 is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/nanopi_neo_plus2_defconfig b/configs/nanopi_neo_plus2_defconfig index 924ff38f17c..60f26318429 100644 --- a/configs/nanopi_neo_plus2_defconfig +++ b/configs/nanopi_neo_plus2_defconfig @@ -9,6 +9,8 @@ CONFIG_DRAM_ZQ=3881977 CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/nanopi_r1s_h5_defconfig b/configs/nanopi_r1s_h5_defconfig index 27cf172d72a..06c564ec8cd 100644 --- a/configs/nanopi_r1s_h5_defconfig +++ b/configs/nanopi_r1s_h5_defconfig @@ -9,6 +9,8 @@ CONFIG_DRAM_ZQ=3881977 CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index 924061da99f..ca482ce745e 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -12,6 +12,8 @@ CONFIG_ENV_OFFSET=0xA0000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-blackarmor-nas220" CONFIG_IDENT_STRING="\nNAS 220" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y @@ -20,6 +22,8 @@ CONFIG_USE_PREBOOT=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="nas220> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1049 # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y CONFIG_CMD_NAND=y diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig index 522d8adfa7b..32308a04f65 100644 --- a/configs/net2big_v2_defconfig +++ b/configs/net2big_v2_defconfig @@ -15,6 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-net2big" CONFIG_IDENT_STRING=" 2Big v2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -28,6 +30,8 @@ CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="2big2> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1048 CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 CONFIG_CMD_I2C=y diff --git a/configs/netgear_cg3100d_ram_defconfig b/configs/netgear_cg3100d_ram_defconfig index b126bd382ed..4336116f577 100644 --- a/configs/netgear_cg3100d_ram_defconfig +++ b/configs/netgear_cg3100d_ram_defconfig @@ -15,8 +15,12 @@ CONFIG_MIPS_BOOT_FDT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CG3100D # " +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=539 CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y # CONFIG_CMD_BOOTD is not set diff --git a/configs/netgear_dgnd3700v2_ram_defconfig b/configs/netgear_dgnd3700v2_ram_defconfig index d04e73f847c..bbfa9e13fa3 100644 --- a/configs/netgear_dgnd3700v2_ram_defconfig +++ b/configs/netgear_dgnd3700v2_ram_defconfig @@ -18,8 +18,12 @@ CONFIG_REMAKE_ELF=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="DGND3700v2 # " +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=542 CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y # CONFIG_CMD_BOOTD is not set diff --git a/configs/netspace_lite_v2_defconfig b/configs/netspace_lite_v2_defconfig index 153ae76a10b..2a1c3ac2d34 100644 --- a/configs/netspace_lite_v2_defconfig +++ b/configs/netspace_lite_v2_defconfig @@ -15,6 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2lite" CONFIG_IDENT_STRING=" NS v2 Lite" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -28,6 +30,8 @@ CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1046 CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 CONFIG_CMD_I2C=y diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig index b5d77fa5918..3c847316f6f 100644 --- a/configs/netspace_max_v2_defconfig +++ b/configs/netspace_max_v2_defconfig @@ -15,6 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2max" CONFIG_IDENT_STRING=" NS Max v2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -28,6 +30,8 @@ CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1046 CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 CONFIG_CMD_I2C=y diff --git a/configs/netspace_mini_v2_defconfig b/configs/netspace_mini_v2_defconfig index ac92f42911d..8239d45a845 100644 --- a/configs/netspace_mini_v2_defconfig +++ b/configs/netspace_mini_v2_defconfig @@ -15,6 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2mini" CONFIG_IDENT_STRING=" NS v2 Mini" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -28,6 +30,8 @@ CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1046 CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 CONFIG_CMD_I2C=y diff --git a/configs/netspace_v2_defconfig b/configs/netspace_v2_defconfig index 00c19f55c95..673e0a42a3f 100644 --- a/configs/netspace_v2_defconfig +++ b/configs/netspace_v2_defconfig @@ -15,6 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2" CONFIG_IDENT_STRING=" NS v2" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_ENV_ADDR=0x70000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -28,6 +30,8 @@ CONFIG_MISC_INIT_R=y CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1046 CONFIG_CMD_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 CONFIG_CMD_I2C=y diff --git a/configs/nitrogen6dl2g_defconfig b/configs/nitrogen6dl2g_defconfig index 3a0d95c3731..2d653d4d0d3 100644 --- a/configs/nitrogen6dl2g_defconfig +++ b/configs/nitrogen6dl2g_defconfig @@ -29,6 +29,8 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y diff --git a/configs/nitrogen6dl_defconfig b/configs/nitrogen6dl_defconfig index f8c1cb11de9..282fea4508d 100644 --- a/configs/nitrogen6dl_defconfig +++ b/configs/nitrogen6dl_defconfig @@ -29,6 +29,8 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y diff --git a/configs/nitrogen6q2g_defconfig b/configs/nitrogen6q2g_defconfig index 02b168c2d45..2bf3e3a9614 100644 --- a/configs/nitrogen6q2g_defconfig +++ b/configs/nitrogen6q2g_defconfig @@ -29,6 +29,8 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y diff --git a/configs/nitrogen6q_defconfig b/configs/nitrogen6q_defconfig index 1286ce5d8c5..e169350f55d 100644 --- a/configs/nitrogen6q_defconfig +++ b/configs/nitrogen6q_defconfig @@ -29,6 +29,8 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y diff --git a/configs/nitrogen6s1g_defconfig b/configs/nitrogen6s1g_defconfig index cec00603cad..60edd7d6e32 100644 --- a/configs/nitrogen6s1g_defconfig +++ b/configs/nitrogen6s1g_defconfig @@ -29,6 +29,8 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y diff --git a/configs/nitrogen6s_defconfig b/configs/nitrogen6s_defconfig index d6d7bac5782..7d1da4cf6b1 100644 --- a/configs/nitrogen6s_defconfig +++ b/configs/nitrogen6s_defconfig @@ -29,6 +29,8 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig index 309cf28269c..6c3a95cd069 100644 --- a/configs/nokia_rx51_defconfig +++ b/configs/nokia_rx51_defconfig @@ -28,6 +28,8 @@ CONFIG_PREBOOT="run preboot" # CONFIG_SYS_DEVICE_NULLDEV is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Nokia RX-51 # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=287 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_NETBSD is not set diff --git a/configs/novena_defconfig b/configs/novena_defconfig index db33d1153bc..77d7afa6df8 100644 --- a/configs/novena_defconfig +++ b/configs/novena_defconfig @@ -31,9 +31,13 @@ CONFIG_BOOTARGS="console=ttymxc1,115200 " CONFIG_BOOTCOMMAND="run distro_bootcmd ; run net_nfs" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y CONFIG_SYS_I2C_EEPROM_BUS=2 diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig index ff015e36a5a..8b525eb5ff5 100644 --- a/configs/nsa310s_defconfig +++ b/configs/nsa310s_defconfig @@ -14,6 +14,8 @@ CONFIG_ENV_OFFSET=0xE0000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-nsa310s" CONFIG_IDENT_STRING="\nZyXEL NSA310S/320S 1/2-Bay Power Media Server" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; bootz 0x800000 - 0x700000" @@ -21,6 +23,8 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="NSA310s> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y diff --git a/configs/nsim_700_defconfig b/configs/nsim_700_defconfig index 4dcb948f498..bcf954aa632 100644 --- a/configs/nsim_700_defconfig +++ b/configs/nsim_700_defconfig @@ -10,10 +10,14 @@ CONFIG_DEBUG_UART_CLOCK=70000000 CONFIG_SYS_CLK_FREQ=70000000 CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_SYS_PROMPT="nsim# " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=279 # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y diff --git a/configs/nsim_700be_defconfig b/configs/nsim_700be_defconfig index cf62da15f2b..5a09db2f9bf 100644 --- a/configs/nsim_700be_defconfig +++ b/configs/nsim_700be_defconfig @@ -11,10 +11,14 @@ CONFIG_DEBUG_UART_CLOCK=70000000 CONFIG_SYS_CLK_FREQ=70000000 CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_SYS_PROMPT="nsim# " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=279 # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y diff --git a/configs/nsim_hs38_defconfig b/configs/nsim_hs38_defconfig index d85d00e00af..ad8acec4e08 100644 --- a/configs/nsim_hs38_defconfig +++ b/configs/nsim_hs38_defconfig @@ -11,11 +11,15 @@ CONFIG_DEBUG_UART_CLOCK=70000000 CONFIG_SYS_CLK_FREQ=70000000 CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_BOARD_EARLY_INIT_R=y CONFIG_SYS_PROMPT="nsim# " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=279 CONFIG_CMD_DM=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/nsim_hs38be_defconfig b/configs/nsim_hs38be_defconfig index 7d16c2ed6e5..8a63e58263f 100644 --- a/configs/nsim_hs38be_defconfig +++ b/configs/nsim_hs38be_defconfig @@ -12,10 +12,14 @@ CONFIG_DEBUG_UART_CLOCK=70000000 CONFIG_SYS_CLK_FREQ=70000000 CONFIG_SYS_LOAD_ADDR=0x82000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_SYS_PROMPT="nsim# " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=279 # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig index f82bace9e75..489ff63595c 100644 --- a/configs/nyan-big_defconfig +++ b/configs/nyan-big_defconfig @@ -23,7 +23,17 @@ CONFIG_SPL_BOOTSTAGE=y CONFIG_BOOTSTAGE_STASH=y CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0xef8100 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x800ffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra124 (Nyan-big) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2087 # CONFIG_CMD_IMI is not set CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/o4-imx6ull-nano_defconfig b/configs/o4-imx6ull-nano_defconfig index 27a82b11630..b634a82eaa7 100644 --- a/configs/o4-imx6ull-nano_defconfig +++ b/configs/o4-imx6ull-nano_defconfig @@ -8,6 +8,8 @@ CONFIG_DM_GPIO=y CONFIG_MT41K256M16HA_125E=y CONFIG_IMX_MODULE_FUSE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y diff --git a/configs/oceanic_5205_5inmfd_defconfig b/configs/oceanic_5205_5inmfd_defconfig index 7ce63ba665d..21468c426b5 100644 --- a/configs/oceanic_5205_5inmfd_defconfig +++ b/configs/oceanic_5205_5inmfd_defconfig @@ -10,6 +10,8 @@ CONFIG_DRAM_ZQ=3881949 CONFIG_MMC0_CD_PIN="" CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_SPI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/octeon_ebb7304_defconfig b/configs/octeon_ebb7304_defconfig index f70f0d214cf..dc2e215c050 100644 --- a/configs/octeon_ebb7304_defconfig +++ b/configs/octeon_ebb7304_defconfig @@ -18,6 +18,8 @@ CONFIG_OF_BOARD_FIXUP=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/octeon_nic23_defconfig b/configs/octeon_nic23_defconfig index 3ab5838f03e..53309152301 100644 --- a/configs/octeon_nic23_defconfig +++ b/configs/octeon_nic23_defconfig @@ -25,6 +25,8 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/octeontx2_95xx_defconfig b/configs/octeontx2_95xx_defconfig index 46a28e1b206..fc7bc6d50ec 100644 --- a/configs/octeontx2_95xx_defconfig +++ b/configs/octeontx2_95xx_defconfig @@ -17,6 +17,8 @@ CONFIG_SYS_LOAD_ADDR=0x4000000 CONFIG_DEBUG_UART=y CONFIG_SYS_MEMTEST_START=0x04000000 CONFIG_SYS_MEMTEST_END=0x040f0000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40ffff0 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_SUPPORT_RAW_INITRD=y @@ -33,6 +35,8 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Marvell> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1050 # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set CONFIG_CMD_MD5SUM=y CONFIG_MD5SUM_VERIFY=y diff --git a/configs/octeontx2_96xx_defconfig b/configs/octeontx2_96xx_defconfig index 9d8cc4b7be4..e0d4fe76a0f 100644 --- a/configs/octeontx2_96xx_defconfig +++ b/configs/octeontx2_96xx_defconfig @@ -16,6 +16,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x4000000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40ffff0 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y @@ -33,6 +35,8 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Marvell> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1050 # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set CONFIG_CMD_MD5SUM=y CONFIG_MD5SUM_VERIFY=y diff --git a/configs/octeontx_81xx_defconfig b/configs/octeontx_81xx_defconfig index d14e121b6ed..72e7c6ff539 100644 --- a/configs/octeontx_81xx_defconfig +++ b/configs/octeontx_81xx_defconfig @@ -18,6 +18,8 @@ CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_SYS_MEMTEST_START=0x2800000 CONFIG_SYS_MEMTEST_END=0x28f0000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x28ffff0 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_SUPPORT_RAW_INITRD=y @@ -33,6 +35,8 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200n8 earlycon=pl011,0x87e028000000 maxcpus= CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Marvell> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1050 # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set CONFIG_CMD_MD5SUM=y CONFIG_MD5SUM_VERIFY=y diff --git a/configs/octeontx_83xx_defconfig b/configs/octeontx_83xx_defconfig index f1d482afb62..fbdf1cb846b 100644 --- a/configs/octeontx_83xx_defconfig +++ b/configs/octeontx_83xx_defconfig @@ -16,6 +16,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x2800000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x28ffff0 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_SUPPORT_RAW_INITRD=y @@ -31,6 +33,8 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200n8 earlycon=pl011,0x87e028000000 maxcpus= CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Marvell> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1050 # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set CONFIG_CMD_MD5SUM=y CONFIG_MD5SUM_VERIFY=y diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig index f9b0c79eff7..079d86961c2 100644 --- a/configs/odroid-c2_defconfig +++ b/configs/odroid-c2_defconfig @@ -10,10 +10,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" odroid-c2" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_ADC=y diff --git a/configs/odroid-c4_defconfig b/configs/odroid-c4_defconfig index f3ea892b5eb..12312dbb2a8 100644 --- a/configs/odroid-c4_defconfig +++ b/configs/odroid-c4_defconfig @@ -12,10 +12,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" odroid-c4/hc4" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig index 8ff71fd28cd..dbd354f1f26 100644 --- a/configs/odroid-go2_defconfig +++ b/configs/odroid-go2_defconfig @@ -21,6 +21,8 @@ CONFIG_DEBUG_UART_BASE=0xFF160000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x600 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y @@ -32,14 +34,22 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3326-odroid-go2.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y # CONFIG_TPL_BANNER_PRINT is not set CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +CONFIG_TPL_MAX_SIZE=0x20000 # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMI is not set diff --git a/configs/odroid-hc4_defconfig b/configs/odroid-hc4_defconfig index 4be838314a8..05d81801887 100644 --- a/configs/odroid-hc4_defconfig +++ b/configs/odroid-hc4_defconfig @@ -13,10 +13,13 @@ CONFIG_IDENT_STRING=" odroid-hc4" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/odroid-n2_defconfig b/configs/odroid-n2_defconfig index b19f98585cf..aa05ee6a5db 100644 --- a/configs/odroid-n2_defconfig +++ b/configs/odroid-n2_defconfig @@ -12,10 +12,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" odroid-n2/n2-plus" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index a4c9c79b81d..7acdca93398 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -14,6 +14,8 @@ CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2" CONFIG_SYS_MEM_TOP_HIDE=0x01600000 CONFIG_SYS_LOAD_ADDR=0x43e00000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x42e00000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y CONFIG_FIT_BEST_MATCH=y @@ -25,6 +27,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_SYS_PROMPT="ODROID-XU3 # " +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig index f2a8cd41912..d442aca7887 100644 --- a/configs/odroid_defconfig +++ b/configs/odroid_defconfig @@ -15,6 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos4412-odroid" CONFIG_SYS_MEM_TOP_HIDE=0x00100000 CONFIG_SYS_LOAD_ADDR=0x43e00000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x43dfff10 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -27,6 +29,7 @@ CONFIG_BOARD_TYPES=y CONFIG_BOARD_LATE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_SYS_PROMPT="Odroid # " +CONFIG_SYS_PBSIZE=1024 # CONFIG_CMD_XIMG is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig index d6ca3c2bda0..c76c10ac70f 100644 --- a/configs/omap35_logic_defconfig +++ b/configs/omap35_logic_defconfig @@ -14,13 +14,18 @@ CONFIG_TARGET_OMAP3_LOGIC=y CONFIG_SPL=y CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00 CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_BOOTCOMMAND="run autoboot" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv preboot;saveenv;" CONFIG_DEFAULT_FDT_FILE="logicpd-torpedo-35xx-devkit.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set @@ -30,9 +35,15 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SYS_PROMPT="OMAP Logic # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1054 # CONFIG_CMD_IMI is not set CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x240000 diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig index 34b3af8ba68..2637ecf9c50 100644 --- a/configs/omap35_logic_somlv_defconfig +++ b/configs/omap35_logic_somlv_defconfig @@ -14,6 +14,8 @@ CONFIG_TARGET_OMAP3_LOGIC=y CONFIG_SPL=y CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00 CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_SYS_MONITOR_BASE=0x10000000 CONFIG_BOOTCOMMAND="run autoboot" @@ -21,7 +23,10 @@ CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv preboot;saveenv;" CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-35xx-devkit.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set @@ -31,10 +36,16 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 # CONFIG_SPL_POWER is not set CONFIG_SYS_PROMPT="OMAP Logic # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1054 # CONFIG_CMD_IMI is not set CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x240000 @@ -60,6 +71,7 @@ CONFIG_MMC_OMAP_HS=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index 4767c0bdc67..54793807864 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -10,11 +10,16 @@ CONFIG_TARGET_OMAP3_BEAGLE=y CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00 CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="omap3-beagle.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SPL_FS_EXT4 is not set CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y @@ -22,6 +27,8 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SYS_PROMPT="BeagleBoard # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1055 CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x280000 CONFIG_CMD_SPL_WRITE_SIZE=0x20000 diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig index d451e201c72..78b7a69ea35 100644 --- a/configs/omap3_evm_defconfig +++ b/configs/omap3_evm_defconfig @@ -10,11 +10,16 @@ CONFIG_TARGET_OMAP3_EVM=y CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00 CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run envboot; run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SPL_FS_EXT4 is not set CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y @@ -22,6 +27,8 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SYS_PROMPT="OMAP3_EVM # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1053 CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x280000 CONFIG_CMD_SPL_WRITE_SIZE=0x20000 diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index 2397ba53419..f55d52736ba 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -14,12 +14,17 @@ CONFIG_TARGET_OMAP3_LOGIC=y CONFIG_SPL=y CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00 CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_BOOTCOMMAND="run autoboot" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv preboot;saveenv;" CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set @@ -29,9 +34,15 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 CONFIG_SYS_PROMPT="OMAP Logic # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1054 # CONFIG_CMD_IMI is not set CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x240000 diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig index 721516d9e53..97cdc9491d3 100644 --- a/configs/omap3_logic_somlv_defconfig +++ b/configs/omap3_logic_somlv_defconfig @@ -14,6 +14,8 @@ CONFIG_TARGET_OMAP3_LOGIC=y CONFIG_SPL=y CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00 CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_SYS_MONITOR_BASE=0x10000000 CONFIG_BOOTCOMMAND="run autoboot" @@ -21,7 +23,10 @@ CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv preboot;saveenv;" CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-37xx-devkit.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set @@ -31,10 +36,16 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 # CONFIG_SPL_POWER is not set CONFIG_SYS_PROMPT="OMAP Logic # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1054 # CONFIG_CMD_IMI is not set CONFIG_CMD_SPL=y CONFIG_CMD_SPL_NAND_OFS=0x240000 @@ -61,6 +72,7 @@ CONFIG_MMC_OMAP36XX_PINS=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig index 03e1a6b70dd..bd6c2ce4cac 100644 --- a/configs/omap4_panda_defconfig +++ b/configs/omap4_panda_defconfig @@ -7,16 +7,24 @@ CONFIG_OMAP44XX=y CONFIG_TARGET_OMAP4_PANDA=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030df00 CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="omap4-panda.dtb" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SPL_MAX_SIZE=0xbc00 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_OS_BOOT=y CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GPIO=y diff --git a/configs/omap4_sdp4430_defconfig b/configs/omap4_sdp4430_defconfig index 9dae340f643..62eb75d1f9a 100644 --- a/configs/omap4_sdp4430_defconfig +++ b/configs/omap4_sdp4430_defconfig @@ -11,12 +11,18 @@ CONFIG_TARGET_OMAP4_SDP4430=y CONFIG_CMD_BAT=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030df00 CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="omap4-sdp.dtb" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SPL_MAX_SIZE=0xbc00 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SPL_I2C is not set # CONFIG_SPL_NAND_SUPPORT is not set +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig index 4c66a4cb397..73d742ea1d2 100644 --- a/configs/omap5_uevm_defconfig +++ b/configs/omap5_uevm_defconfig @@ -11,13 +11,21 @@ CONFIG_ENV_OFFSET_REDUND=0x280000 CONFIG_ARMV7_LPAE=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4031ff00 CONFIG_BOOTCOMMAND="if test ${dofastboot} -eq 1; then echo Boot fastboot requested, resetting dofastboot ...;setenv dofastboot 0; saveenv;echo Booting into fastboot ...; fastboot 1;fi;if test ${boot_fit} -eq 1; then run update_to_fit;fi;run findfdt; run finduuid; run distro_bootcmd;run emmc_android_boot; " CONFIG_DEFAULT_FDT_FILE="omap5-uevm.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_SPL_MAX_SIZE=0x1dc00 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_OS_BOOT=y CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index 799dc407571..b45f6d8564e 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -22,6 +22,8 @@ CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0xc0700000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0000f20 CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y @@ -31,7 +33,18 @@ CONFIG_LOGLEVEL=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_CLOCKS=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_PAD_TO=0x8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xc0000000 +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x8001ff00 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0f70000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x110000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/openpiton_riscv64_defconfig b/configs/openpiton_riscv64_defconfig index 1700f4a2a5b..aa4c307b4c6 100644 --- a/configs/openpiton_riscv64_defconfig +++ b/configs/openpiton_riscv64_defconfig @@ -11,12 +11,16 @@ CONFIG_RISCV_SMODE=y CONFIG_OF_BOARD_FIXUP=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x82000000 # CONFIG_EXPERT is not set # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fdt addr ${fdtcontroladdr}; fdt move ${fdtcontroladdr} ${fdt_addr_r}; load mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} ${image}; booti ${kernel_addr_r} - ${fdt_addr_r}; " CONFIG_SYS_PROMPT="openpiton$ " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=284 # CONFIG_CMD_CPU is not set CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_NETBSD is not set diff --git a/configs/openpiton_riscv64_spl_defconfig b/configs/openpiton_riscv64_spl_defconfig index 8a7e3ccf3df..bf0e09b73c8 100644 --- a/configs/openpiton_riscv64_spl_defconfig +++ b/configs/openpiton_riscv64_spl_defconfig @@ -15,18 +15,28 @@ CONFIG_CMODEL_MEDANY=y CONFIG_RISCV_SMODE=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x82000000 # CONFIG_EXPERT is not set # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fdt addr ${fdtcontroladdr}; fdt move ${fdtcontroladdr} ${fdt_addr_r}; load mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} ${image}; booti ${kernel_addr_r} - ${fdt_addr_r}; " +CONFIG_SPL_MAX_SIZE=0x100000 +CONFIG_SPL_BSS_START_ADDR=0x82000000 # CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x83fffe80 +CONFIG_SYS_SPL_MALLOC=y # CONFIG_SPL_BANNER_PRINT is not set CONFIG_SPL_CPU=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="boot/fw_payload.bin" CONFIG_SPL_RTC=y CONFIG_SYS_PROMPT="openpiton$ " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=284 # CONFIG_CMD_CPU is not set CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_NETBSD is not set diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig index 4ae5d1fa5dd..967246a9db9 100644 --- a/configs/openrd_base_defconfig +++ b/configs/openrd_base_defconfig @@ -13,6 +13,8 @@ CONFIG_ENV_OFFSET=0x80000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-base" CONFIG_IDENT_STRING="\nOpenRD-Base" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=524288 @@ -23,6 +25,7 @@ CONFIG_USE_PREBOOT=y CONFIG_LOGLEVEL=2 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig index 3e6eb170ff8..f1dbed87d69 100644 --- a/configs/openrd_client_defconfig +++ b/configs/openrd_client_defconfig @@ -14,6 +14,8 @@ CONFIG_ENV_OFFSET=0x80000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-client" CONFIG_IDENT_STRING="\nOpenRD-Client" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=524288 @@ -24,6 +26,7 @@ CONFIG_USE_PREBOOT=y CONFIG_LOGLEVEL=2 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig index d7a02dd2d8a..49668150fb9 100644 --- a/configs/openrd_ultimate_defconfig +++ b/configs/openrd_ultimate_defconfig @@ -14,6 +14,8 @@ CONFIG_ENV_OFFSET=0x80000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-ultimate" CONFIG_IDENT_STRING="\nOpenRD-Ultimate" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=524288 @@ -24,6 +26,7 @@ CONFIG_USE_PREBOOT=y CONFIG_LOGLEVEL=2 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig index 5f5caceb8d4..1c1daf86a3b 100644 --- a/configs/opos6uldev_defconfig +++ b/configs/opos6uldev_defconfig @@ -31,11 +31,14 @@ CONFIG_DEFAULT_FDT_FILE="imx6ul-opos6uldev.dtb" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="BIOS> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=535 CONFIG_CMD_CONFIG=y CONFIG_CMD_LICENSE=y CONFIG_CMD_BOOTZ=y diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig index 461300fd106..e9626fb09a6 100644 --- a/configs/orangepi-rk3399_defconfig +++ b/configs/orangepi-rk3399_defconfig @@ -12,9 +12,18 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/orangepi_2_defconfig b/configs/orangepi_2_defconfig index 7aaa5190b3a..e18b8610847 100644 --- a/configs/orangepi_2_defconfig +++ b/configs/orangepi_2_defconfig @@ -7,7 +7,9 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 CONFIG_USB1_VBUS_PIN="PG13" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SUN8I_EMAC=y diff --git a/configs/orangepi_3_defconfig b/configs/orangepi_3_defconfig index ebecf49ebda..824f017dae4 100644 --- a/configs/orangepi_3_defconfig +++ b/configs/orangepi_3_defconfig @@ -8,6 +8,8 @@ CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_BLUETOOTH_DT_DEVICE_FIXUP="brcm,bcm4345c5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x118000 +CONFIG_SYS_PBSIZE=1024 CONFIG_PHY_SUN50I_USB3=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig index 75c97d6b897..cfce6cb0d47 100644 --- a/configs/orangepi_lite2_defconfig +++ b/configs/orangepi_lite2_defconfig @@ -7,5 +7,7 @@ CONFIG_SUNXI_DRAM_H6_LPDDR3=y CONFIG_MMC0_CD_PIN="PF6" # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x118000 +CONFIG_SYS_PBSIZE=1024 CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/orangepi_lite_defconfig b/configs/orangepi_lite_defconfig index 96bbd1bab6f..c7174170dbf 100644 --- a/configs/orangepi_lite_defconfig +++ b/configs/orangepi_lite_defconfig @@ -5,5 +5,7 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/orangepi_one_defconfig b/configs/orangepi_one_defconfig index 1064b4a39de..112ff5e5b6a 100644 --- a/configs/orangepi_one_defconfig +++ b/configs/orangepi_one_defconfig @@ -5,6 +5,8 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig index 55a8b003fb5..63d3addbdd3 100644 --- a/configs/orangepi_one_plus_defconfig +++ b/configs/orangepi_one_plus_defconfig @@ -7,5 +7,7 @@ CONFIG_SUNXI_DRAM_H6_LPDDR3=y CONFIG_MMC0_CD_PIN="PF6" # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x118000 +CONFIG_SYS_PBSIZE=1024 CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig index 777af8c60ea..7b12bf00ff2 100644 --- a/configs/orangepi_pc2_defconfig +++ b/configs/orangepi_pc2_defconfig @@ -8,7 +8,9 @@ CONFIG_DRAM_ZQ=3881977 CONFIG_MACPWR="PD6" CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig index 905ff7b1271..28107ad5f7a 100644 --- a/configs/orangepi_pc_defconfig +++ b/configs/orangepi_pc_defconfig @@ -5,7 +5,9 @@ CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=624 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SUN8I_EMAC=y diff --git a/configs/orangepi_pc_plus_defconfig b/configs/orangepi_pc_plus_defconfig index f845138153d..30638679bc6 100644 --- a/configs/orangepi_pc_plus_defconfig +++ b/configs/orangepi_pc_plus_defconfig @@ -6,7 +6,9 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=624 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SUN8I_EMAC=y diff --git a/configs/orangepi_plus2e_defconfig b/configs/orangepi_plus2e_defconfig index 138a6a72b8c..85b25ddd167 100644 --- a/configs/orangepi_plus2e_defconfig +++ b/configs/orangepi_plus2e_defconfig @@ -7,7 +7,9 @@ CONFIG_DRAM_CLK=672 CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SUN8I_EMAC=y diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig index 76de72aa228..dff0a2fd6e9 100644 --- a/configs/orangepi_plus_defconfig +++ b/configs/orangepi_plus_defconfig @@ -9,7 +9,9 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PG13" CONFIG_SATAPWR="PG11" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SUN8I_EMAC=y diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig index 95a82e20f3e..8c4cb57ef0f 100644 --- a/configs/orangepi_prime_defconfig +++ b/configs/orangepi_prime_defconfig @@ -7,6 +7,8 @@ CONFIG_DRAM_CLK=672 CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/orangepi_r1_defconfig b/configs/orangepi_r1_defconfig index 4496aa4a45c..e15069c048e 100644 --- a/configs/orangepi_r1_defconfig +++ b/configs/orangepi_r1_defconfig @@ -8,6 +8,8 @@ CONFIG_DRAM_CLK=624 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SPI_FLASH_WINBOND=y CONFIG_SUN8I_EMAC=y CONFIG_SPI=y diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig index 3b78ad7e52d..830cbbaaeba 100644 --- a/configs/orangepi_win_defconfig +++ b/configs/orangepi_win_defconfig @@ -7,6 +7,8 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_MACPWR="PD14" CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHY_REALTEK=y CONFIG_SUN8I_EMAC=y diff --git a/configs/orangepi_zero2_defconfig b/configs/orangepi_zero2_defconfig index 54faf6aba2c..62117548e2b 100644 --- a/configs/orangepi_zero2_defconfig +++ b/configs/orangepi_zero2_defconfig @@ -10,7 +10,10 @@ CONFIG_MACH_SUN50I_H616=y CONFIG_MMC0_CD_PIN="PF6" CONFIG_R_I2C_ENABLE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_MAX_SIZE=0xbfa0 +CONFIG_SPL_STACK=0x58000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/orangepi_zero_defconfig b/configs/orangepi_zero_defconfig index 2dc69d2994a..b5ff84aaf67 100644 --- a/configs/orangepi_zero_defconfig +++ b/configs/orangepi_zero_defconfig @@ -8,6 +8,8 @@ CONFIG_DRAM_CLK=624 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SPI_FLASH_WINBOND=y CONFIG_SUN8I_EMAC=y CONFIG_SPI=y diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig index 9583d24c8d6..79040125dcc 100644 --- a/configs/orangepi_zero_plus2_defconfig +++ b/configs/orangepi_zero_plus2_defconfig @@ -9,6 +9,8 @@ CONFIG_DRAM_ZQ=3881977 CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/orangepi_zero_plus2_h3_defconfig b/configs/orangepi_zero_plus2_h3_defconfig index 55a251374a1..b2d4f3f8e07 100644 --- a/configs/orangepi_zero_plus2_h3_defconfig +++ b/configs/orangepi_zero_plus2_h3_defconfig @@ -8,6 +8,8 @@ CONFIG_DRAM_CLK=672 CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/orangepi_zero_plus_defconfig b/configs/orangepi_zero_plus_defconfig index f3ecf35eee1..008384e4601 100644 --- a/configs/orangepi_zero_plus_defconfig +++ b/configs/orangepi_zero_plus_defconfig @@ -7,6 +7,8 @@ CONFIG_DRAM_CLK=624 CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/origen_defconfig b/configs/origen_defconfig index 05d955696b2..0a36472d331 100644 --- a/configs/origen_defconfig +++ b/configs/origen_defconfig @@ -18,11 +18,16 @@ CONFIG_IDENT_STRING=" for ORIGEN" CONFIG_SYS_MEM_TOP_HIDE=0x100000 CONFIG_SYS_LOAD_ADDR=0x43e00000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2040000 CONFIG_BOOTCOMMAND="if mmc rescan; then echo SD/MMC found on device ${mmcdev};if run loadbootenv; then echo Loaded environment from ${bootenv};run importbootenv;fi;if test -n $uenvcmd; then echo Running uenvcmd ...;run uenvcmd;fi;if run loadbootscript; then run bootscript; fi; fi;load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} " CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3800 CONFIG_SYS_PROMPT="ORIGEN # " +CONFIG_SYS_PBSIZE=1024 # CONFIG_CMD_XIMG is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y diff --git a/configs/p200_defconfig b/configs/p200_defconfig index 4ba0028f73a..5fdcc1216f0 100644 --- a/configs/p200_defconfig +++ b/configs/p200_defconfig @@ -10,10 +10,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" p200" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/p201_defconfig b/configs/p201_defconfig index 6de83263bdf..a87c16a60c0 100644 --- a/configs/p201_defconfig +++ b/configs/p201_defconfig @@ -11,10 +11,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" p201" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/p212_defconfig b/configs/p212_defconfig index 8506601a47b..ebcb194767e 100644 --- a/configs/p212_defconfig +++ b/configs/p212_defconfig @@ -11,11 +11,14 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" p212" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/p2371-0000_defconfig b/configs/p2371-0000_defconfig index b335d851bfc..d93b355d47d 100644 --- a/configs/p2371-0000_defconfig +++ b/configs/p2371-0000_defconfig @@ -13,6 +13,8 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra210 (P2371-0000) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2089 # CONFIG_CMD_IMI is not set CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig index 5977325973e..74125c15a87 100644 --- a/configs/p2371-2180_defconfig +++ b/configs/p2371-2180_defconfig @@ -16,6 +16,8 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra210 (P2371-2180) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2089 # CONFIG_CMD_IMI is not set CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/p2571_defconfig b/configs/p2571_defconfig index d3f169ae241..b4e14add1d7 100644 --- a/configs/p2571_defconfig +++ b/configs/p2571_defconfig @@ -14,6 +14,8 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra210 (P2571) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2084 # CONFIG_CMD_IMI is not set CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/p2771-0000-000_defconfig b/configs/p2771-0000-000_defconfig index 47be8a1c286..7b2fd5795a0 100644 --- a/configs/p2771-0000-000_defconfig +++ b/configs/p2771-0000-000_defconfig @@ -14,6 +14,8 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra186 (P2771-0000-000) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2093 # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/p2771-0000-500_defconfig b/configs/p2771-0000-500_defconfig index 94866cd7693..41621970f00 100644 --- a/configs/p2771-0000-500_defconfig +++ b/configs/p2771-0000-500_defconfig @@ -14,6 +14,8 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra186 (P2771-0000-500) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2093 # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/p3450-0000_defconfig b/configs/p3450-0000_defconfig index ec813dd7a5b..fbe4aea1bd3 100644 --- a/configs/p3450-0000_defconfig +++ b/configs/p3450-0000_defconfig @@ -17,6 +17,8 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra210 (P3450-0000) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2089 # CONFIG_CMD_IMI is not set CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/parrot_r16_defconfig b/configs/parrot_r16_defconfig index d56c4504b6a..14e9b455feb 100644 --- a/configs/parrot_r16_defconfig +++ b/configs/parrot_r16_defconfig @@ -11,6 +11,8 @@ CONFIG_USB0_ID_DET="PD10" CONFIG_USB1_VBUS_PIN="PD12" CONFIG_AXP_GPIO=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_CONS_INDEX=5 CONFIG_USB_EHCI_HCD=y diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig index f11b57dde75..0aa8a7673a3 100644 --- a/configs/paz00_defconfig +++ b/configs/paz00_defconfig @@ -12,7 +12,17 @@ CONFIG_TARGET_PAZ00=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (Paz00) MOD # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2087 # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig index 264bff86fb9..75999d177dc 100644 --- a/configs/pcm052_defconfig +++ b/configs/pcm052_defconfig @@ -22,6 +22,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run bootcmd_nand" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/pcm058_defconfig b/configs/pcm058_defconfig index 8b6a8b35700..132942bf554 100644 --- a/configs/pcm058_defconfig +++ b/configs/pcm058_defconfig @@ -30,14 +30,18 @@ CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run mmcboot;run nandboot" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x18a CONFIG_SPL_DMA=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x31400 CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig index 7c45872052a..27be6075661 100644 --- a/configs/peach-pi_defconfig +++ b/configs/peach-pi_defconfig @@ -18,11 +18,16 @@ CONFIG_SPL=y CONFIG_IDENT_STRING=" for Peach-Pi" CONFIG_SYS_LOAD_ADDR=0x23e00000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2073800 CONFIG_FIT=y CONFIG_FIT_BEST_MATCH=y CONFIG_SILENT_CONSOLE=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x7800 CONFIG_SYS_PROMPT="Peach-Pi # " +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig index 9e1fdd4e6a2..296b4ceb195 100644 --- a/configs/peach-pit_defconfig +++ b/configs/peach-pit_defconfig @@ -17,11 +17,16 @@ CONFIG_SPL=y CONFIG_IDENT_STRING=" for Peach-Pit" CONFIG_SYS_LOAD_ADDR=0x23e00000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2073800 CONFIG_FIT=y CONFIG_FIT_BEST_MATCH=y CONFIG_SILENT_CONSOLE=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x7800 CONFIG_SYS_PROMPT="Peach-Pit # " +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig index 844a39fd388..c5d65740834 100644 --- a/configs/pg_wcom_expu1_defconfig +++ b/configs/pg_wcom_expu1_defconfig @@ -41,6 +41,9 @@ CONFIG_SILENT_CONSOLE=y CONFIG_EVENT=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y diff --git a/configs/pg_wcom_expu1_update_defconfig b/configs/pg_wcom_expu1_update_defconfig index bea61f70f61..c2b079df379 100644 --- a/configs/pg_wcom_expu1_update_defconfig +++ b/configs/pg_wcom_expu1_update_defconfig @@ -39,6 +39,9 @@ CONFIG_SILENT_CONSOLE=y CONFIG_EVENT=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig index 81610881782..56e922a241c 100644 --- a/configs/pg_wcom_seli8_defconfig +++ b/configs/pg_wcom_seli8_defconfig @@ -41,6 +41,9 @@ CONFIG_SILENT_CONSOLE=y CONFIG_EVENT=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y diff --git a/configs/pg_wcom_seli8_update_defconfig b/configs/pg_wcom_seli8_update_defconfig index 0a36ab9839b..9d25094a9a6 100644 --- a/configs/pg_wcom_seli8_update_defconfig +++ b/configs/pg_wcom_seli8_update_defconfig @@ -39,6 +39,9 @@ CONFIG_SILENT_CONSOLE=y CONFIG_EVENT=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y diff --git a/configs/phycore-am335x-r2-regor_defconfig b/configs/phycore-am335x-r2-regor_defconfig index 1344a2350a2..27342294f79 100644 --- a/configs/phycore-am335x-r2-regor_defconfig +++ b/configs/phycore-am335x-r2-regor_defconfig @@ -15,6 +15,8 @@ CONFIG_SPL=y CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_PAYLOAD="u-boot.img" +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 # CONFIG_FIT is not set CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTCOMMAND=y @@ -22,6 +24,8 @@ CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="am335x-regor-rdk.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_I2C=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y @@ -29,6 +33,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_POWER=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_BOOTZ=y CONFIG_CMD_SPL=y # CONFIG_CMD_FLASH is not set diff --git a/configs/phycore-am335x-r2-wega_defconfig b/configs/phycore-am335x-r2-wega_defconfig index 45ded518a93..95905b4ba4c 100644 --- a/configs/phycore-am335x-r2-wega_defconfig +++ b/configs/phycore-am335x-r2-wega_defconfig @@ -15,6 +15,8 @@ CONFIG_SPL=y CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_PAYLOAD="u-boot.img" +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 # CONFIG_FIT is not set CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTCOMMAND=y @@ -22,6 +24,8 @@ CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="am335x-wega-rdk.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SPL_I2C=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y @@ -29,6 +33,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_POWER=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_BOOTZ=y CONFIG_CMD_SPL=y # CONFIG_CMD_FLASH is not set diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig index ba5833f7060..b8cda9f64f2 100644 --- a/configs/phycore-imx8mm_defconfig +++ b/configs/phycore-imx8mm_defconfig @@ -26,7 +26,17 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;" CONFIG_DEFAULT_FDT_FILE="oftree" CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x920000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y @@ -35,6 +45,9 @@ CONFIG_SPL_SPI_FLASH_MTD=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set # CONFIG_CMD_CRC32 is not set diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index 86d0f4df7f6..d10ab2a22c1 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -27,9 +27,19 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;" CONFIG_DEFAULT_FDT_FILE="oftree" CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x26000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x98fc00 +CONFIG_SPL_BSS_MAX_SIZE=0x400 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x960000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y @@ -37,6 +47,9 @@ CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set # CONFIG_CMD_CRC32 is not set diff --git a/configs/phycore-rk3288_defconfig b/configs/phycore-rk3288_defconfig index 64446492221..d791e9dcf8d 100644 --- a/configs/phycore-rk3288_defconfig +++ b/configs/phycore-rk3288_defconfig @@ -15,12 +15,18 @@ CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-phycore-rdk.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_CONSOLE_MUX=y CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_CMD_GPIO=y diff --git a/configs/phycore_pcl063_defconfig b/configs/phycore_pcl063_defconfig index 0a05c4b22f2..b9d2a976636 100644 --- a/configs/phycore_pcl063_defconfig +++ b/configs/phycore_pcl063_defconfig @@ -18,8 +18,11 @@ CONFIG_SYS_MEMTEST_END=0x90000000 CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_MEMTEST=y CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y diff --git a/configs/phycore_pcl063_ull_defconfig b/configs/phycore_pcl063_ull_defconfig index a672b16f237..f172b065bfc 100644 --- a/configs/phycore_pcl063_ull_defconfig +++ b/configs/phycore_pcl063_ull_defconfig @@ -18,8 +18,11 @@ CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run mmc_mmc_fit" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig index 8c5934cc916..a912ea638ff 100644 --- a/configs/pic32mzdask_defconfig +++ b/configs/pic32mzdask_defconfig @@ -12,10 +12,15 @@ CONFIG_MIPS_BOOT_FDT=y CONFIG_SYS_MEMTEST_START=0x88000000 CONFIG_SYS_MEMTEST_END=0x88080000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007ffff CONFIG_TIMESTAMP=y CONFIG_BOOTDELAY=5 CONFIG_BOOTCOMMAND="run distro_bootcmd || run legacy_bootcmd" +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SYS_BOOTPARAMS_LEN=0x1000 CONFIG_SYS_PROMPT="dask # " +CONFIG_SYS_PBSIZE=1048 # CONFIG_CMD_SAVEENV is not set CONFIG_LOOPW=y CONFIG_CMD_MEMINFO=y diff --git a/configs/pico-dwarf-imx6ul_defconfig b/configs/pico-dwarf-imx6ul_defconfig index 8e1c25def99..18373600a40 100644 --- a/configs/pico-dwarf-imx6ul_defconfig +++ b/configs/pico-dwarf-imx6ul_defconfig @@ -25,9 +25,12 @@ CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-dwarf.dtb" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTMENU=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y diff --git a/configs/pico-dwarf-imx7d_defconfig b/configs/pico-dwarf-imx7d_defconfig index 90b607b90df..e27b5626a3a 100644 --- a/configs/pico-dwarf-imx7d_defconfig +++ b/configs/pico-dwarf-imx7d_defconfig @@ -25,10 +25,16 @@ CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=715776 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx7d-pico-dwarf.dtb" +CONFIG_SPL_MAX_SIZE=0xe000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_IMI is not set diff --git a/configs/pico-hobbit-imx6ul_defconfig b/configs/pico-hobbit-imx6ul_defconfig index 28414666851..f8754092fff 100644 --- a/configs/pico-hobbit-imx6ul_defconfig +++ b/configs/pico-hobbit-imx6ul_defconfig @@ -26,9 +26,12 @@ CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-hobbit.dtb" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTMENU=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig index 1342d850117..275a3a0d1f6 100644 --- a/configs/pico-hobbit-imx7d_defconfig +++ b/configs/pico-hobbit-imx7d_defconfig @@ -25,10 +25,16 @@ CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=715776 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx7d-pico-hobbit.dtb" +CONFIG_SPL_MAX_SIZE=0xe000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_IMI is not set diff --git a/configs/pico-imx6_defconfig b/configs/pico-imx6_defconfig index 5330556734d..086b3ee3ab2 100644 --- a/configs/pico-imx6_defconfig +++ b/configs/pico-imx6_defconfig @@ -27,12 +27,16 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_BOOTCOMMAND="run default_boot" CONFIG_DEFAULT_FDT_FILE="ask" CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTMENU=y CONFIG_CMD_SPL=y CONFIG_CMD_SPL_WRITE_SIZE=0x20000 diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig index c198a660ea3..aeda4557436 100644 --- a/configs/pico-imx6ul_defconfig +++ b/configs/pico-imx6ul_defconfig @@ -26,9 +26,12 @@ CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="ask" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTMENU=y CONFIG_CMD_SPL=y CONFIG_CMD_SPL_WRITE_SIZE=0x20000 diff --git a/configs/pico-imx7d_bl33_defconfig b/configs/pico-imx7d_bl33_defconfig index 09117e9a4ea..13a7fcf1759 100644 --- a/configs/pico-imx7d_bl33_defconfig +++ b/configs/pico-imx7d_bl33_defconfig @@ -26,11 +26,17 @@ CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run distro_bootcmd" +CONFIG_SPL_MAX_SIZE=0xe000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_SPL=y diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig index 6473aaaede4..3181964cdd4 100644 --- a/configs/pico-imx7d_defconfig +++ b/configs/pico-imx7d_defconfig @@ -25,10 +25,16 @@ CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=715776 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="ask" +CONFIG_SPL_MAX_SIZE=0xe000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_IMI is not set diff --git a/configs/pico-imx8mq_defconfig b/configs/pico-imx8mq_defconfig index 91aca29e830..8e27f723142 100644 --- a/configs/pico-imx8mq_defconfig +++ b/configs/pico-imx8mq_defconfig @@ -30,13 +30,24 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x180000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x187ff0 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 # CONFIG_BOOTM_NETBSD is not set # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set diff --git a/configs/pico-nymph-imx7d_defconfig b/configs/pico-nymph-imx7d_defconfig index 90b607b90df..e27b5626a3a 100644 --- a/configs/pico-nymph-imx7d_defconfig +++ b/configs/pico-nymph-imx7d_defconfig @@ -25,10 +25,16 @@ CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=715776 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx7d-pico-dwarf.dtb" +CONFIG_SPL_MAX_SIZE=0xe000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_IMI is not set diff --git a/configs/pico-pi-imx6ul_defconfig b/configs/pico-pi-imx6ul_defconfig index 31f37dab26f..bb085678c7c 100644 --- a/configs/pico-pi-imx6ul_defconfig +++ b/configs/pico-pi-imx6ul_defconfig @@ -26,9 +26,12 @@ CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-pi.dtb" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTMENU=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig index 812aa24b091..1a052a40227 100644 --- a/configs/pico-pi-imx7d_defconfig +++ b/configs/pico-pi-imx7d_defconfig @@ -25,10 +25,16 @@ CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=715776 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx7d-pico-pi.dtb" +CONFIG_SPL_MAX_SIZE=0xe000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_IMI is not set diff --git a/configs/pine64-lts_defconfig b/configs/pine64-lts_defconfig index 7e7c2d79104..c6b4f7bf143 100644 --- a/configs/pine64-lts_defconfig +++ b/configs/pine64-lts_defconfig @@ -10,6 +10,8 @@ CONFIG_MMC0_CD_PIN="" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SUN8I_EMAC=y diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index f42f4e5923a..7dbe061790c 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -6,6 +6,8 @@ CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_PINE64_DT_SELECTION=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" CONFIG_PHY_REALTEK=y CONFIG_SUN8I_EMAC=y diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig index 09a4275f0e7..2cddcf58301 100644 --- a/configs/pine_h64_defconfig +++ b/configs/pine_h64_defconfig @@ -11,6 +11,8 @@ CONFIG_USB3_VBUS_PIN="PL5" CONFIG_SPL_SPI_SUNXI=y # CONFIG_PSCI_RESET is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x118000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SUN8I_EMAC=y diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig index 8ca1d0708f9..121182c55d7 100644 --- a/configs/pinebook-pro-rk3399_defconfig +++ b/configs/pinebook-pro-rk3399_defconfig @@ -14,12 +14,21 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_BOOTDELAY=3 CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_SPL_MTD_SUPPORT=y diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig index 26918dd3875..bf070aab8b3 100644 --- a/configs/pinebook_defconfig +++ b/configs/pinebook_defconfig @@ -8,6 +8,8 @@ CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=3881949 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_R_I2C_ENABLE=y +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_DM_REGULATOR_FIXED=y diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig index 28e347b4d95..531cf0f83b6 100644 --- a/configs/pinecube_defconfig +++ b/configs/pinecube_defconfig @@ -8,7 +8,9 @@ CONFIG_DRAM_CLK=504 CONFIG_DRAM_ODT_EN=y CONFIG_I2C0_ENABLE=y # CONFIG_HAS_ARMV7_SECURE_BASE is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f diff --git a/configs/pinephone_defconfig b/configs/pinephone_defconfig index 9d39204a439..d882c0cc880 100644 --- a/configs/pinephone_defconfig +++ b/configs/pinephone_defconfig @@ -10,6 +10,8 @@ CONFIG_DRAM_ZQ=3881949 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_PINEPHONE_DT_SELECTION=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_OF_LIST="sun50i-a64-pinephone-1.1 sun50i-a64-pinephone-1.2" CONFIG_LED_STATUS=y CONFIG_LED_STATUS_GPIO=y diff --git a/configs/pinetab_defconfig b/configs/pinetab_defconfig index 0cc24146b39..f90cb0d1f81 100644 --- a/configs/pinetab_defconfig +++ b/configs/pinetab_defconfig @@ -8,3 +8,5 @@ CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=3881949 CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index 3a179fa5ae5..ad1853f05e2 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -14,7 +14,17 @@ CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (Plutux) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2084 # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig index 8b14e0daf3a..c22076250bc 100644 --- a/configs/pm9261_defconfig +++ b/configs/pm9261_defconfig @@ -11,6 +11,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek" CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_ENV_ADDR=0x10040000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003f00 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 " @@ -22,6 +24,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="pm9261> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig index 78f2ae9a4be..1406e7f1aa4 100644 --- a/configs/pm9263_defconfig +++ b/configs/pm9263_defconfig @@ -11,6 +11,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek" CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_ENV_ADDR=0x10040000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003f00 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 " @@ -21,6 +23,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="u-boot-pm9263> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=288 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/pm9g45_defconfig b/configs/pm9g45_defconfig index 1b4dbdeafac..fbad587d383 100644 --- a/configs/pm9g45_defconfig +++ b/configs/pm9g45_defconfig @@ -13,6 +13,8 @@ CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70003f00 CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -22,8 +24,11 @@ CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y +CONFIG_SPL_MAX_SIZE=0x10000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/pogo_e02_defconfig b/configs/pogo_e02_defconfig index 2d807f1a9c1..b7f9c12efcd 100644 --- a/configs/pogo_e02_defconfig +++ b/configs/pogo_e02_defconfig @@ -13,6 +13,8 @@ CONFIG_ENV_OFFSET=0xC0000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogo_e02" CONFIG_IDENT_STRING="\nPogo E02" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y @@ -20,6 +22,8 @@ CONFIG_BOOTCOMMAND="setenv bootargs $(bootargs_console); run bootcmd_usb; bootm CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="PogoE02> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1050 # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y CONFIG_CMD_USB=y diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig index ca27bbba67a..6f928edf41b 100644 --- a/configs/pogo_v4_defconfig +++ b/configs/pogo_v4_defconfig @@ -13,6 +13,8 @@ CONFIG_ENV_OFFSET=0xC0000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogoplug-series-4" CONFIG_IDENT_STRING="\nPogoplug V4" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 CONFIG_BOOTSTAGE=y CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_BOOTDELAY=10 @@ -22,6 +24,8 @@ CONFIG_USE_PREBOOT=y CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Pogo_V4> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_PLAN9 is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/polaroid_mid2407pxe03_defconfig b/configs/polaroid_mid2407pxe03_defconfig index 17fffeb1e26..74ffaf1d011 100644 --- a/configs/polaroid_mid2407pxe03_defconfig +++ b/configs/polaroid_mid2407pxe03_defconfig @@ -16,6 +16,8 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_CONS_INDEX=5 CONFIG_USB_MUSB_HOST=y diff --git a/configs/polaroid_mid2809pxe04_defconfig b/configs/polaroid_mid2809pxe04_defconfig index e542b711132..10057ade9a5 100644 --- a/configs/polaroid_mid2809pxe04_defconfig +++ b/configs/polaroid_mid2809pxe04_defconfig @@ -16,6 +16,8 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_CONS_INDEX=5 CONFIG_USB_MUSB_HOST=y diff --git a/configs/poleg_evb_defconfig b/configs/poleg_evb_defconfig index 94bb34a3a75..16f6215148c 100644 --- a/configs/poleg_evb_defconfig +++ b/configs/poleg_evb_defconfig @@ -13,9 +13,14 @@ CONFIG_DEFAULT_DEVICE_TREE="nuvoton-npcm750-evb" CONFIG_TARGET_POLEG=y CONFIG_SYS_LOAD_ADDR=0x10000000 CONFIG_ENV_ADDR=0x80100000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7f10 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run common_bootargs; run romboot" CONFIG_SYS_PROMPT="U-Boot>" +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=280 CONFIG_CMD_GPIO=y CONFIG_CMD_SPI=y CONFIG_CMD_CACHE=y diff --git a/configs/pomelo_defconfig b/configs/pomelo_defconfig index 5dcd1e57761..13b1d7b628b 100644 --- a/configs/pomelo_defconfig +++ b/configs/pomelo_defconfig @@ -8,12 +8,16 @@ CONFIG_DEFAULT_DEVICE_TREE="phytium-pomelo" CONFIG_SYS_LOAD_ADDR=0x90000000 CONFIG_SYS_PCI_64BIT=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2981a000 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0,115200 earlycon=pl011,0x28001000 root=/dev/sda2 rw" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_LAST_STAGE_INIT=y CONFIG_SYS_PROMPT="pomelo#" +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=280 CONFIG_OF_CONTROL=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_PCI_COMPAT=y diff --git a/configs/poplar_defconfig b/configs/poplar_defconfig index 5d2639f71bd..85ff6bd07cb 100644 --- a/configs/poplar_defconfig +++ b/configs/poplar_defconfig @@ -10,8 +10,13 @@ CONFIG_DEFAULT_DEVICE_TREE="hi3798cv200-poplar" CONFIG_IDENT_STRING="poplar" CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x200000 # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="poplar# " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=537 CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_ISO_PARTITION is not set diff --git a/configs/popmetal-rk3288_defconfig b/configs/popmetal-rk3288_defconfig index cb463a9b69a..5b5039e290b 100644 --- a/configs/popmetal-rk3288_defconfig +++ b/configs/popmetal-rk3288_defconfig @@ -15,12 +15,18 @@ CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-popmetal.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_CONSOLE_MUX=y CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_CMD_GPIO=y diff --git a/configs/porter_defconfig b/configs/porter_defconfig index 05f85d33b64..568ec18049d 100644 --- a/configs/porter_defconfig +++ b/configs/porter_defconfig @@ -26,16 +26,24 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x50000000 CONFIG_ENV_ADDR=0xC0000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4f000000 CONFIG_FIT=y CONFIG_BOOTDELAY=3 +CONFIG_SPL_MAX_SIZE=0x4000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6340000 CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=256 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/pov_protab2_ips9_defconfig b/configs/pov_protab2_ips9_defconfig index a62c9f8fa37..523de63fc27 100644 --- a/configs/pov_protab2_ips9_defconfig +++ b/configs/pov_protab2_ips9_defconfig @@ -14,7 +14,9 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 7ce2dc07192..f902f144f28 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -17,10 +17,19 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xff8e0000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff8effff CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 diff --git a/configs/px30-core-ctouch2-of10-px30_defconfig b/configs/px30-core-ctouch2-of10-px30_defconfig index 213d01fe7a8..784f3c076d0 100644 --- a/configs/px30-core-ctouch2-of10-px30_defconfig +++ b/configs/px30-core-ctouch2-of10-px30_defconfig @@ -19,6 +19,8 @@ CONFIG_DEBUG_UART_BASE=0xFF160000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x600 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y @@ -29,12 +31,20 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-ctouch2-of10.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y # CONFIG_TPL_BANNER_PRINT is not set CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +CONFIG_TPL_MAX_SIZE=0x20000 # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMI is not set diff --git a/configs/px30-core-ctouch2-px30_defconfig b/configs/px30-core-ctouch2-px30_defconfig index 875d7aa7de3..a98a1f6ec88 100644 --- a/configs/px30-core-ctouch2-px30_defconfig +++ b/configs/px30-core-ctouch2-px30_defconfig @@ -19,6 +19,8 @@ CONFIG_DEBUG_UART_BASE=0xFF160000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x600 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y @@ -29,12 +31,20 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-ctouch2.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y # CONFIG_TPL_BANNER_PRINT is not set CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +CONFIG_TPL_MAX_SIZE=0x20000 # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMI is not set diff --git a/configs/px30-core-edimm2.2-px30_defconfig b/configs/px30-core-edimm2.2-px30_defconfig index 4e2fa8cf7dc..f10732230af 100644 --- a/configs/px30-core-edimm2.2-px30_defconfig +++ b/configs/px30-core-edimm2.2-px30_defconfig @@ -19,6 +19,8 @@ CONFIG_DEBUG_UART_BASE=0xFF160000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x400000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x600 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y @@ -29,12 +31,20 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-edimm2.2.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x4000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y # CONFIG_TPL_BANNER_PRINT is not set CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set +CONFIG_TPL_MAX_SIZE=0x20000 # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMI is not set diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index c2051615cbb..8dfd51e25b8 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -22,6 +22,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" @@ -34,6 +36,10 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_BSS_START_ADDR=0x80000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -45,6 +51,8 @@ CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/q8_a13_tablet_defconfig b/configs/q8_a13_tablet_defconfig index f269b8a5889..83981d3ac74 100644 --- a/configs/q8_a13_tablet_defconfig +++ b/configs/q8_a13_tablet_defconfig @@ -15,7 +15,9 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig index dda1a0c51f6..11d208a34a0 100644 --- a/configs/q8_a23_tablet_800x480_defconfig +++ b/configs/q8_a23_tablet_800x480_defconfig @@ -16,6 +16,8 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_CONS_INDEX=5 CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig index 7925677d30e..c848e62d73c 100644 --- a/configs/q8_a33_tablet_1024x600_defconfig +++ b/configs/q8_a33_tablet_1024x600_defconfig @@ -16,6 +16,8 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_CONS_INDEX=5 CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig index f3335f9d233..ee5654185b1 100644 --- a/configs/q8_a33_tablet_800x480_defconfig +++ b/configs/q8_a33_tablet_800x480_defconfig @@ -16,6 +16,8 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_CONS_INDEX=5 CONFIG_USB_MUSB_HOST=y diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig index eac2cc2854d..55444b69a7a 100644 --- a/configs/qemu-ppce500_defconfig +++ b/configs/qemu-ppce500_defconfig @@ -16,6 +16,7 @@ CONFIG_BOOTCOMMAND="test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $ # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_REGINFO=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y diff --git a/configs/qemu-riscv32_defconfig b/configs/qemu-riscv32_defconfig index 91b5c9a3b80..1f169e1a34f 100644 --- a/configs/qemu-riscv32_defconfig +++ b/configs/qemu-riscv32_defconfig @@ -6,9 +6,13 @@ CONFIG_DEFAULT_DEVICE_TREE="qemu-virt32" CONFIG_SYS_LOAD_ADDR=0x80200000 CONFIG_TARGET_QEMU_VIRT=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_FIT=y CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set diff --git a/configs/qemu-riscv32_smode_defconfig b/configs/qemu-riscv32_smode_defconfig index 5a135f8624c..6f501a8798c 100644 --- a/configs/qemu-riscv32_smode_defconfig +++ b/configs/qemu-riscv32_smode_defconfig @@ -7,9 +7,13 @@ CONFIG_SYS_LOAD_ADDR=0x80200000 CONFIG_TARGET_QEMU_VIRT=y CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_FIT=y CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set diff --git a/configs/qemu-riscv32_spl_defconfig b/configs/qemu-riscv32_spl_defconfig index 410aecf2162..2bc7b9fbd0f 100644 --- a/configs/qemu-riscv32_spl_defconfig +++ b/configs/qemu-riscv32_spl_defconfig @@ -9,10 +9,17 @@ CONFIG_TARGET_QEMU_VIRT=y CONFIG_RISCV_SMODE=y # CONFIG_OF_BOARD_FIXUP is not set CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000 CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y +CONFIG_SPL_MAX_SIZE=0x100000 +CONFIG_SPL_BSS_START_ADDR=0x84000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_CMD_MII is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y diff --git a/configs/qemu-riscv64_defconfig b/configs/qemu-riscv64_defconfig index f7b9de10875..95dc1b47699 100644 --- a/configs/qemu-riscv64_defconfig +++ b/configs/qemu-riscv64_defconfig @@ -7,9 +7,13 @@ CONFIG_SYS_LOAD_ADDR=0x80200000 CONFIG_TARGET_QEMU_VIRT=y CONFIG_ARCH_RV64I=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_FIT=y CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set diff --git a/configs/qemu-riscv64_smode_defconfig b/configs/qemu-riscv64_smode_defconfig index 4d83570c455..3eb3ea756e4 100644 --- a/configs/qemu-riscv64_smode_defconfig +++ b/configs/qemu-riscv64_smode_defconfig @@ -8,11 +8,15 @@ CONFIG_TARGET_QEMU_VIRT=y CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_FIT=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr}; fdt addr ${fdtcontroladdr};" CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set diff --git a/configs/qemu-riscv64_spl_defconfig b/configs/qemu-riscv64_spl_defconfig index e19273e79cd..e39accf9400 100644 --- a/configs/qemu-riscv64_spl_defconfig +++ b/configs/qemu-riscv64_spl_defconfig @@ -9,10 +9,17 @@ CONFIG_TARGET_QEMU_VIRT=y CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000 CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y +CONFIG_SPL_MAX_SIZE=0x100000 +CONFIG_SPL_BSS_START_ADDR=0x84000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_CMD_MII is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index cc8393e6b98..66192734d55 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -30,6 +30,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_PCI_INIT_R=y +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_CPU=y CONFIG_SPL_ENV_SUPPORT=y @@ -38,6 +39,7 @@ CONFIG_SPL_NET=y CONFIG_SPL_PCI=y CONFIG_SPL_PCH=y CONFIG_SPL_RTC=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 6010b61d2df..b9ab1805ab2 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_PCI_INIT_R=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y diff --git a/configs/qemu_arm64_defconfig b/configs/qemu_arm64_defconfig index 8d5c5751961..87acf00f30e 100644 --- a/configs/qemu_arm64_defconfig +++ b/configs/qemu_arm64_defconfig @@ -13,6 +13,8 @@ CONFIG_ENV_ADDR=0x4000000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200000 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y @@ -22,6 +24,8 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_PCI_INIT_R=y +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_DFU=y diff --git a/configs/qemu_arm_defconfig b/configs/qemu_arm_defconfig index 3b019e4bbe9..d14a7adc5df 100644 --- a/configs/qemu_arm_defconfig +++ b/configs/qemu_arm_defconfig @@ -15,6 +15,8 @@ CONFIG_ENV_ADDR=0x4000000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200000 CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_FIT_VERBOSE=y @@ -24,6 +26,8 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_PCI_INIT_R=y +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_DFU=y diff --git a/configs/r2dplus_defconfig b/configs/r2dplus_defconfig index 40617089ee7..5a38b070437 100644 --- a/configs/r2dplus_defconfig +++ b/configs/r2dplus_defconfig @@ -17,6 +17,8 @@ CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="pci enum" CONFIG_DISPLAY_BOARDINFO=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=256 CONFIG_CMD_IMLS=y CONFIG_CMD_DM=y CONFIG_CMD_IDE=y diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig index 8875a09b2c9..f5adbd3686c 100644 --- a/configs/r7-tv-dongle_defconfig +++ b/configs/r7-tv-dongle_defconfig @@ -6,7 +6,9 @@ CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=384 CONFIG_USB1_VBUS_PIN="PG13" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/r8a77970_eagle_defconfig b/configs/r8a77970_eagle_defconfig index 7b050d82457..9ca3ddf27b7 100644 --- a/configs/r8a77970_eagle_defconfig +++ b/configs/r8a77970_eagle_defconfig @@ -21,7 +21,15 @@ CONFIG_USE_BOOTARGS=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77970-eagle.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a77970-eagle.dtb" +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xe631f000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6304000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/r8a77980_condor_defconfig b/configs/r8a77980_condor_defconfig index c3b6e99ae77..ef59b9c7785 100644 --- a/configs/r8a77980_condor_defconfig +++ b/configs/r8a77980_condor_defconfig @@ -22,7 +22,15 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77980-condor.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a77980-condor.dtb" # CONFIG_BOARD_EARLY_INIT_F is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xe631f000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6304000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/r8a77990_ebisu_defconfig b/configs/r8a77990_ebisu_defconfig index fba03a760fc..e667d23d7ee 100644 --- a/configs/r8a77990_ebisu_defconfig +++ b/configs/r8a77990_ebisu_defconfig @@ -22,8 +22,16 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77990-ebisu.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a77990-ebisu.dtb" # CONFIG_BOARD_EARLY_INIT_F is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_UPDATE_TFTP=y +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xe631f000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6304000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_BOOTZ=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 CONFIG_CMD_DFU=y @@ -69,6 +77,7 @@ CONFIG_RENESAS_SDHI=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_CFI_FLASH=y CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/r8a77995_draak_defconfig b/configs/r8a77995_draak_defconfig index 008254715e2..afccf86461d 100644 --- a/configs/r8a77995_draak_defconfig +++ b/configs/r8a77995_draak_defconfig @@ -21,8 +21,16 @@ CONFIG_USE_BOOTARGS=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77995-draak.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a77995-draak.dtb" +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_UPDATE_TFTP=y +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xe631f000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6304000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y @@ -63,6 +71,7 @@ CONFIG_RENESAS_SDHI=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_CFI_FLASH=y CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/r8a779a0_falcon_defconfig b/configs/r8a779a0_falcon_defconfig index f76b1132a8e..72c31ac3a19 100644 --- a/configs/r8a779a0_falcon_defconfig +++ b/configs/r8a779a0_falcon_defconfig @@ -24,7 +24,15 @@ CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.0.1:/export/rfs ip=192.168.0.2 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a779a0-falcon.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a779a0-falcon.dtb" +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xe631f000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6304000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/radxa-zero_defconfig b/configs/radxa-zero_defconfig index 5e845600b46..95f7f429111 100644 --- a/configs/radxa-zero_defconfig +++ b/configs/radxa-zero_defconfig @@ -11,10 +11,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" radxa-zero" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index 4bdaae0bc63..9f27592088c 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -23,6 +23,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" @@ -34,6 +36,10 @@ CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_BSS_START_ADDR=0x80000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -46,6 +52,8 @@ CONFIG_SPL_YMODEM_SUPPORT=y # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/rcar3_salvator-x_defconfig b/configs/rcar3_salvator-x_defconfig index 6ef62ab4cbb..d423ad7b826 100644 --- a/configs/rcar3_salvator-x_defconfig +++ b/configs/rcar3_salvator-x_defconfig @@ -21,8 +21,16 @@ CONFIG_USE_BOOTARGS=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77950-salvator-x.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a77950-salvator-x.dtb" +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_UPDATE_TFTP=y +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xe633f000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6304000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_BOOTZ=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 CONFIG_CMD_DFU=y @@ -72,6 +80,7 @@ CONFIG_RENESAS_SDHI=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_CFI_FLASH=y CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/rcar3_ulcb_defconfig b/configs/rcar3_ulcb_defconfig index a7ef4f1c0ee..341abe4f6dd 100644 --- a/configs/rcar3_ulcb_defconfig +++ b/configs/rcar3_ulcb_defconfig @@ -21,8 +21,16 @@ CONFIG_USE_BOOTARGS=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77950-ulcb.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a77950-ulcb.dtb" +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_UPDATE_TFTP=y +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xe633f000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6304000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_BOOTZ=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 CONFIG_CMD_DFU=y @@ -71,6 +79,7 @@ CONFIG_RENESAS_SDHI=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_CFI_FLASH=y CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig index bdfe51cef81..a2ef6187f82 100644 --- a/configs/riotboard_defconfig +++ b/configs/riotboard_defconfig @@ -28,10 +28,14 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_RAW_IMAGE_SUPPORT=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" +CONFIG_SPL_FS_LOAD_ARGS_NAME="imx6dl-riotboard.dtb" CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_FALCON_BOOT_MMCSD=y -CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x0 +CONFIG_SYS_SPL_ARGS_ADDR=0x13000000 +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/roc-cc-rk3308_defconfig b/configs/roc-cc-rk3308_defconfig index 0ae45ca8a19..325b7cb182b 100644 --- a/configs/roc-cc-rk3308_defconfig +++ b/configs/roc-cc-rk3308_defconfig @@ -16,12 +16,21 @@ CONFIG_DEBUG_UART_BASE=0xFF0C0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_BOOTDELAY=0 CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_MAX_SIZE=0x20000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set diff --git a/configs/roc-cc-rk3328_defconfig b/configs/roc-cc-rk3328_defconfig index 5fc4dd77943..866cdbc24df 100644 --- a/configs/roc-cc-rk3328_defconfig +++ b/configs/roc-cc-rk3328_defconfig @@ -17,6 +17,8 @@ CONFIG_DEBUG_UART_BASE=0xFF130000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y @@ -26,13 +28,21 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-roc-cc.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x2000000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_TPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_TPL_MAX_SIZE=0x40000 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig index fd857ed0ffd..f537a605e1a 100644 --- a/configs/roc-pc-mezzanine-rk3399_defconfig +++ b/configs/roc-pc-mezzanine-rk3399_defconfig @@ -17,10 +17,19 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc-mezzanine.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x20000 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig index 4684fa6e747..a502e549fb3 100644 --- a/configs/roc-pc-rk3399_defconfig +++ b/configs/roc-pc-rk3399_defconfig @@ -17,10 +17,19 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x20000 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/rock-pi-4-rk3399_defconfig b/configs/rock-pi-4-rk3399_defconfig index 80d1e63b59c..cf2e9fbde38 100644 --- a/configs/rock-pi-4-rk3399_defconfig +++ b/configs/rock-pi-4-rk3399_defconfig @@ -12,11 +12,20 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock-pi-4b.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/rock-pi-4c-rk3399_defconfig b/configs/rock-pi-4c-rk3399_defconfig index bda4b70dbf9..fd5b25d77b4 100644 --- a/configs/rock-pi-4c-rk3399_defconfig +++ b/configs/rock-pi-4c-rk3399_defconfig @@ -12,11 +12,20 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock-pi-4c.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/rock-pi-e-rk3328_defconfig b/configs/rock-pi-e-rk3328_defconfig index 36038d90530..4c70e62b88e 100644 --- a/configs/rock-pi-e-rk3328_defconfig +++ b/configs/rock-pi-e-rk3328_defconfig @@ -18,6 +18,8 @@ CONFIG_DEBUG_UART_BASE=0xFF130000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y @@ -27,14 +29,22 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock-pi-e.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x2000000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_TPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_TPL_MAX_SIZE=0x40000 CONFIG_TPL_DRIVERS_MISC=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y diff --git a/configs/rock-pi-n10-rk3399pro_defconfig b/configs/rock-pi-n10-rk3399pro_defconfig index 7151da4c191..e63a77a2537 100644 --- a/configs/rock-pi-n10-rk3399pro_defconfig +++ b/configs/rock-pi-n10-rk3399pro_defconfig @@ -13,12 +13,21 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399pro-rock-pi-n10.dtb" # CONFIG_CONSOLE_MUX is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y diff --git a/configs/rock-pi-n8-rk3288_defconfig b/configs/rock-pi-n8-rk3288_defconfig index 6d13e351ee6..7abb343ad69 100644 --- a/configs/rock-pi-n8-rk3288_defconfig +++ b/configs/rock-pi-n8-rk3288_defconfig @@ -16,10 +16,16 @@ CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_CMD_SPL=y diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig index e8d183cd9b6..c06ab641c30 100644 --- a/configs/rock2_defconfig +++ b/configs/rock2_defconfig @@ -15,12 +15,18 @@ CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-rock2-square.dtb" CONFIG_SILENT_CONSOLE=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_CMD_GPIO=y diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig index ea61fe738f2..893f0384afb 100644 --- a/configs/rock64-rk3328_defconfig +++ b/configs/rock64-rk3328_defconfig @@ -17,6 +17,8 @@ CONFIG_DEBUG_UART_BASE=0xFF130000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y @@ -26,13 +28,21 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x2000000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_TPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_TPL_MAX_SIZE=0x40000 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig index be0e1c7d186..78e50dbfbcb 100644 --- a/configs/rock960-rk3399_defconfig +++ b/configs/rock960-rk3399_defconfig @@ -11,15 +11,25 @@ CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_TPL=y CONFIG_SYS_PROMPT="rock960 => " +CONFIG_SYS_PBSIZE=1052 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/rock_defconfig b/configs/rock_defconfig index 4aa4608f904..e99272ef226 100644 --- a/configs/rock_defconfig +++ b/configs/rock_defconfig @@ -18,10 +18,17 @@ CONFIG_DEBUG_UART_BASE=0x20064000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x60800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x60100000 CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3188-radxarock.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x7800 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x10087fff CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_RANDOM_UUID=y diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig index e6f7a8469a3..4d2a5b32e31 100644 --- a/configs/rockpro64-rk3399_defconfig +++ b/configs/rockpro64-rk3399_defconfig @@ -15,11 +15,20 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x400000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 CONFIG_SPL_SPI_LOAD=y diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig index 2e4a0df39bd..504f475b034 100644 --- a/configs/rpi_0_w_defconfig +++ b/configs/rpi_0_w_defconfig @@ -9,6 +9,8 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-zero-w" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff00 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set @@ -16,6 +18,7 @@ CONFIG_USE_PREBOOT=y CONFIG_MISC_INIT_R=y CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index 7b78e84ba32..9e5d97a2269 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -10,6 +10,8 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="bcm2836-rpi-2-b" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff00 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set @@ -17,6 +19,7 @@ CONFIG_USE_PREBOOT=y CONFIG_MISC_INIT_R=y CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig index c1d55388101..1fc95365dfb 100644 --- a/configs/rpi_3_32b_defconfig +++ b/configs/rpi_3_32b_defconfig @@ -9,6 +9,8 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff00 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set @@ -16,6 +18,7 @@ CONFIG_USE_PREBOOT=y CONFIG_MISC_INIT_R=y CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/rpi_3_b_plus_defconfig b/configs/rpi_3_b_plus_defconfig index f935e678780..a1f9ba78aaa 100644 --- a/configs/rpi_3_b_plus_defconfig +++ b/configs/rpi_3_b_plus_defconfig @@ -8,6 +8,8 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b-plus" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7fffe40 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set @@ -15,6 +17,7 @@ CONFIG_USE_PREBOOT=y CONFIG_MISC_INIT_R=y CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig index 9e4e168ef04..770d496dc6b 100644 --- a/configs/rpi_3_defconfig +++ b/configs/rpi_3_defconfig @@ -8,6 +8,8 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7fffe40 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set @@ -15,6 +17,7 @@ CONFIG_USE_PREBOOT=y CONFIG_MISC_INIT_R=y CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig index a699591ceec..aed6e525474 100644 --- a/configs/rpi_4_32b_defconfig +++ b/configs/rpi_4_32b_defconfig @@ -6,6 +6,8 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="bcm2711-rpi-4-b" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7fffee0 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="pci enum; usb start;" @@ -14,6 +16,7 @@ CONFIG_PREBOOT="pci enum; usb start;" CONFIG_MISC_INIT_R=y CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig index eae03bf023c..66375056973 100644 --- a/configs/rpi_4_defconfig +++ b/configs/rpi_4_defconfig @@ -6,6 +6,8 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="bcm2711-rpi-4-b" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7fffe30 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="pci enum; usb start;" @@ -14,6 +16,7 @@ CONFIG_PREBOOT="pci enum; usb start;" CONFIG_MISC_INIT_R=y CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig index 933e1422065..16f64eb5408 100644 --- a/configs/rpi_arm64_defconfig +++ b/configs/rpi_arm64_defconfig @@ -6,6 +6,8 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="bcm2711-rpi-4-b" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7fffe30 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="pci enum; usb start;" @@ -14,6 +16,7 @@ CONFIG_PREBOOT="pci enum; usb start;" CONFIG_MISC_INIT_R=y CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index 0fe4ec4cf40..00745c2a1ea 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -9,6 +9,8 @@ CONFIG_ENV_SIZE=0x4000 CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-b" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7ffff00 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set @@ -16,6 +18,7 @@ CONFIG_USE_PREBOOT=y CONFIG_MISC_INIT_R=y CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y diff --git a/configs/rut_defconfig b/configs/rut_defconfig index b1fde88303f..1b91d8b5ab8 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -22,6 +22,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" @@ -34,6 +36,10 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_BSS_START_ADDR=0x80000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -45,6 +51,8 @@ CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_ASKENV=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 CONFIG_CMD_DFU=y diff --git a/configs/rzg2_beacon_defconfig b/configs/rzg2_beacon_defconfig index 6c8a94a06bc..1451a40dd93 100644 --- a/configs/rzg2_beacon_defconfig +++ b/configs/rzg2_beacon_defconfig @@ -19,7 +19,10 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi" CONFIG_DEFAULT_FDT_FILE="r8a774a1-beacon-rzg2m-kit.dtb" # CONFIG_BOARD_EARLY_INIT_F is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/s400_defconfig b/configs/s400_defconfig index 1cebca67793..ee855aa4b49 100644 --- a/configs/s400_defconfig +++ b/configs/s400_defconfig @@ -11,10 +11,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" s400" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/s5p4418_nanopi2_defconfig b/configs/s5p4418_nanopi2_defconfig index 4d571acd870..e6e2d3eedbe 100644 --- a/configs/s5p4418_nanopi2_defconfig +++ b/configs/s5p4418_nanopi2_defconfig @@ -18,6 +18,8 @@ CONFIG_ROOT_PART=2 CONFIG_SYS_LOAD_ADDR=0x71080000 CONFIG_SYS_MEMTEST_START=0x71000000 CONFIG_SYS_MEMTEST_END=0xb0000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x74c00000 CONFIG_FIT=y CONFIG_FIT_BEST_MATCH=y CONFIG_SUPPORT_RAW_INITRD=y @@ -27,6 +29,7 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_LATE_INIT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="nanopi2# " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_RTEMS is not set diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig index 5c39c1d6bbe..a0104044a85 100644 --- a/configs/s5p_goni_defconfig +++ b/configs/s5p_goni_defconfig @@ -11,6 +11,8 @@ CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni" CONFIG_TARGET_S5P_GONI=y CONFIG_SYS_LOAD_ADDR=0x34000000 CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x33000000 # CONFIG_AUTOBOOT is not set CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock8 rootfstype=ext4 ${console} ${meminfo} ${mtdparts}" @@ -21,6 +23,8 @@ CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="Goni # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=384 # CONFIG_CMD_XIMG is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y diff --git a/configs/s5pc210_universal_defconfig b/configs/s5pc210_universal_defconfig index e7bd1ae047e..af7fef58a60 100644 --- a/configs/s5pc210_universal_defconfig +++ b/configs/s5pc210_universal_defconfig @@ -15,6 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos4210-universal_c210" CONFIG_SYS_MEM_TOP_HIDE=0x100000 CONFIG_SYS_LOAD_ADDR=0x44800000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x447fff10 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="Please use defined boot" CONFIG_BOOTCOMMAND="run mmcboot" @@ -22,6 +24,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_MISC_INIT_R=y CONFIG_SYS_PROMPT="Universal # " +CONFIG_SYS_PBSIZE=1024 # CONFIG_CMD_XIMG is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y diff --git a/configs/sagem_f@st1704_ram_defconfig b/configs/sagem_f@st1704_ram_defconfig index c06ff632b40..875ae210de4 100644 --- a/configs/sagem_f@st1704_ram_defconfig +++ b/configs/sagem_f@st1704_ram_defconfig @@ -16,8 +16,12 @@ CONFIG_MIPS_BOOT_FDT=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="F@ST1704 # " +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=540 CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y # CONFIG_CMD_BOOTD is not set diff --git a/configs/sam9x60_curiosity_mmc_defconfig b/configs/sam9x60_curiosity_mmc_defconfig index dd884bf8aa6..592667160b6 100644 --- a/configs/sam9x60_curiosity_mmc_defconfig +++ b/configs/sam9x60_curiosity_mmc_defconfig @@ -15,6 +15,8 @@ CONFIG_DEBUG_UART_BASE=0xfffff200 CONFIG_DEBUG_UART_CLOCK=200000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000bf00 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -27,6 +29,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTZ=y CONFIG_CMD_CLK=y CONFIG_CMD_DM=y diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig index bc0164c38e4..9ac46f6a6a0 100644 --- a/configs/sam9x60ek_mmc_defconfig +++ b/configs/sam9x60ek_mmc_defconfig @@ -15,6 +15,8 @@ CONFIG_DEBUG_UART_BASE=0xfffff200 CONFIG_DEBUG_UART_CLOCK=200000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000bf00 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -27,6 +29,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTZ=y CONFIG_CMD_CLK=y CONFIG_CMD_DM=y diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig index 5c34f089e67..ec005a3d6d3 100644 --- a/configs/sam9x60ek_nandflash_defconfig +++ b/configs/sam9x60ek_nandflash_defconfig @@ -15,6 +15,8 @@ CONFIG_DEBUG_UART_CLOCK=200000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000bf00 CONFIG_FIT=y CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 @@ -27,6 +29,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTZ=y CONFIG_CMD_CLK=y CONFIG_CMD_DM=y diff --git a/configs/sam9x60ek_qspiflash_defconfig b/configs/sam9x60ek_qspiflash_defconfig index 1a64b2948f5..7898d5597ff 100644 --- a/configs/sam9x60ek_qspiflash_defconfig +++ b/configs/sam9x60ek_qspiflash_defconfig @@ -16,6 +16,8 @@ CONFIG_DEBUG_UART_CLOCK=200000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000bf00 CONFIG_FIT=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=3 @@ -28,6 +30,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 CONFIG_CMD_BOOTZ=y CONFIG_CMD_CLK=y CONFIG_CMD_DM=y diff --git a/configs/sama5d27_giantboard_defconfig b/configs/sama5d27_giantboard_defconfig index 4977189716f..4ab7831742d 100644 --- a/configs/sama5d27_giantboard_defconfig +++ b/configs/sama5d27_giantboard_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x22003ef0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -36,7 +38,17 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fatload mmc 0 0x22000000 at91-sama5d27_giantboard.dtb; fatload mmc 0 0x23000000 zImage; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set diff --git a/configs/sama5d27_som1_ek_mmc1_defconfig b/configs/sama5d27_som1_ek_mmc1_defconfig index 3e8c7b5d112..e29a8380e44 100644 --- a/configs/sama5d27_som1_ek_mmc1_defconfig +++ b/configs/sama5d27_som1_ek_mmc1_defconfig @@ -23,6 +23,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x22003ee0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -32,7 +34,17 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fatload mmc 1 0x22000000 at91-sama5d27_som1_ek.dtb; fatload mmc 1 0x23000000 zImage; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d27_som1_ek_mmc_defconfig b/configs/sama5d27_som1_ek_mmc_defconfig index 4a9a1f9bdf6..c807387457b 100644 --- a/configs/sama5d27_som1_ek_mmc_defconfig +++ b/configs/sama5d27_som1_ek_mmc_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x22003ee0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -33,7 +35,17 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fatload mmc 0 0x22000000 at91-sama5d27_som1_ek.dtb; fatload mmc 0 0x23000000 zImage; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d27_som1_ek_qspiflash_defconfig b/configs/sama5d27_som1_ek_qspiflash_defconfig index a20272fe427..500798eee22 100644 --- a/configs/sama5d27_som1_ek_qspiflash_defconfig +++ b/configs/sama5d27_som1_ek_qspiflash_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x22003ee0 CONFIG_FIT=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=3 @@ -31,7 +33,17 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d27_wlsom1_ek_mmc_defconfig b/configs/sama5d27_wlsom1_ek_mmc_defconfig index 05a2e412a6d..b5d5c34d9b0 100644 --- a/configs/sama5d27_wlsom1_ek_mmc_defconfig +++ b/configs/sama5d27_wlsom1_ek_mmc_defconfig @@ -22,6 +22,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -32,10 +34,20 @@ CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_ # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SPL_DISPLAY_PRINT=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_AT91_MCK_BYPASS=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig index 691b0c21fc0..983e5045565 100644 --- a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig +++ b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig @@ -22,6 +22,8 @@ CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_QSPI_BOOT=y CONFIG_SPI_BOOT=y @@ -32,6 +34,14 @@ CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x60000 0xc000; sf read 0x220 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SPL_DISPLAY_PRINT=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_DM_SPI_FLASH=y @@ -39,6 +49,8 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_SPL_AT91_MCK_BYPASS=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d2_icp_mmc_defconfig b/configs/sama5d2_icp_mmc_defconfig index bb70c10e256..8d4698ef320 100644 --- a/configs/sama5d2_icp_mmc_defconfig +++ b/configs/sama5d2_icp_mmc_defconfig @@ -22,6 +22,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -31,12 +33,22 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x21000000 at91-sama5d2_icp.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SPL_DISPLAY_PRINT=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_AT91_MCK_BYPASS=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set CONFIG_CMD_DM=y diff --git a/configs/sama5d2_icp_qspiflash_defconfig b/configs/sama5d2_icp_qspiflash_defconfig index 715691844f6..373f5639731 100644 --- a/configs/sama5d2_icp_qspiflash_defconfig +++ b/configs/sama5d2_icp_qspiflash_defconfig @@ -16,6 +16,8 @@ CONFIG_SYS_MEMTEST_END=0x40000000 CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_SYS_BOOT_GET_CMDLINE=y CONFIG_SYS_BOOT_GET_KBD=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0 CONFIG_FIT=y CONFIG_QSPI_BOOT=y CONFIG_SD_BOOT=y @@ -26,7 +28,10 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x21000000 at91-sama5d2_icp.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x10000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_CONFIG=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/sama5d2_ptc_ek_mmc_defconfig b/configs/sama5d2_ptc_ek_mmc_defconfig index 542d667d7e2..c2aa7f0cc7d 100644 --- a/configs/sama5d2_ptc_ek_mmc_defconfig +++ b/configs/sama5d2_ptc_ek_mmc_defconfig @@ -14,6 +14,8 @@ CONFIG_DEBUG_UART_CLOCK=82000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -25,6 +27,8 @@ CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d2_ptc_ek_nandflash_defconfig b/configs/sama5d2_ptc_ek_nandflash_defconfig index e1887e14b19..b5dc6ccd589 100644 --- a/configs/sama5d2_ptc_ek_nandflash_defconfig +++ b/configs/sama5d2_ptc_ek_nandflash_defconfig @@ -14,6 +14,8 @@ CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0 CONFIG_FIT=y CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 @@ -25,6 +27,8 @@ CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d2_xplained_emmc_defconfig b/configs/sama5d2_xplained_emmc_defconfig index 081f5f9d9c6..2891cc5a7f7 100644 --- a/configs/sama5d2_xplained_emmc_defconfig +++ b/configs/sama5d2_xplained_emmc_defconfig @@ -23,6 +23,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x22003ee0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -31,7 +33,17 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwai CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x22000000 at91-sama5d2_xplained.dtb; fatload mmc 0:1 0x23000000 zImage; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig index 255fb0fa7d5..600cb0cbd8b 100644 --- a/configs/sama5d2_xplained_mmc_defconfig +++ b/configs/sama5d2_xplained_mmc_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x22003ee0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -33,7 +35,17 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fatload mmc 1:1 0x22000000 at91-sama5d2_xplained.dtb; fatload mmc 1:1 0x23000000 zImage; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d2_xplained_qspiflash_defconfig b/configs/sama5d2_xplained_qspiflash_defconfig index 5bd4d69332c..4f9062628af 100644 --- a/configs/sama5d2_xplained_qspiflash_defconfig +++ b/configs/sama5d2_xplained_qspiflash_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x22003ee0 CONFIG_FIT=y CONFIG_QSPI_BOOT=y CONFIG_SD_BOOT=y @@ -34,7 +36,17 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe 1:0; sf read 0x22000000 0x180000 0x80000; sf read 0x23000000 0x200000 0x600000; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig index b1c27e98518..0041294797b 100644 --- a/configs/sama5d2_xplained_spiflash_defconfig +++ b/configs/sama5d2_xplained_spiflash_defconfig @@ -26,6 +26,8 @@ CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x22003ee0 CONFIG_FIT=y CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 @@ -35,10 +37,20 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="ext4load mmc 0:1 0x22000000 /boot/at91-sama5d2_xplained.dtb; ext4load mmc 0:1 0x23000000 /boot/zImage; bootz 0x23000000 - 0x22000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d36ek_cmp_mmc_defconfig b/configs/sama5d36ek_cmp_mmc_defconfig index 256ab76b076..898b2f38538 100644 --- a/configs/sama5d36ek_cmp_mmc_defconfig +++ b/configs/sama5d36ek_cmp_mmc_defconfig @@ -14,6 +14,8 @@ CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -24,7 +26,10 @@ CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_ # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x18000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/sama5d36ek_cmp_nandflash_defconfig b/configs/sama5d36ek_cmp_nandflash_defconfig index d89b539ccf5..be4482c9f9c 100644 --- a/configs/sama5d36ek_cmp_nandflash_defconfig +++ b/configs/sama5d36ek_cmp_nandflash_defconfig @@ -14,6 +14,8 @@ CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 @@ -24,7 +26,10 @@ CONFIG_BOOTCOMMAND="nand read 0x21000000 0x180000 0x80000;nand read 0x22000000 0 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x18000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/sama5d36ek_cmp_spiflash_defconfig b/configs/sama5d36ek_cmp_spiflash_defconfig index 9fbed91b845..6f1cd2055ad 100644 --- a/configs/sama5d36ek_cmp_spiflash_defconfig +++ b/configs/sama5d36ek_cmp_spiflash_defconfig @@ -16,6 +16,8 @@ CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 @@ -26,7 +28,10 @@ CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x60000 0xc000; sf read 0x220 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x18000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/sama5d3_xplained_mmc_defconfig b/configs/sama5d3_xplained_mmc_defconfig index b9b938bab77..42f6053e595 100644 --- a/configs/sama5d3_xplained_mmc_defconfig +++ b/configs/sama5d3_xplained_mmc_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -32,7 +34,17 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwai CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_name}.dtb; fi; fatload mmc 0:1 0x21000000 ${dtb_name}; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x318000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig index d8dd849dc0d..b1fe27a9a03 100644 --- a/configs/sama5d3_xplained_nandflash_defconfig +++ b/configs/sama5d3_xplained_nandflash_defconfig @@ -21,6 +21,8 @@ CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0 CONFIG_FIT=y CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 @@ -29,10 +31,20 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(boots CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="nand read 0x21000000 0x180000 0x80000;nand read 0x22000000 0x200000 0x600000;bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x318000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_BASE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig index 2dbf9abf4cd..39e6a4e7937 100644 --- a/configs/sama5d3xek_mmc_defconfig +++ b/configs/sama5d3xek_mmc_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -34,7 +36,17 @@ CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_ # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x318000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set CONFIG_CMD_IMLS=y diff --git a/configs/sama5d3xek_nandflash_defconfig b/configs/sama5d3xek_nandflash_defconfig index 27ab84c3a37..d4a6243cdc8 100644 --- a/configs/sama5d3xek_nandflash_defconfig +++ b/configs/sama5d3xek_nandflash_defconfig @@ -21,6 +21,8 @@ CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 @@ -31,10 +33,20 @@ CONFIG_BOOTCOMMAND="nand read 0x21000000 0x180000 0x80000;nand read 0x22000000 0 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x318000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_BASE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set CONFIG_CMD_IMLS=y diff --git a/configs/sama5d3xek_spiflash_defconfig b/configs/sama5d3xek_spiflash_defconfig index 6a4230207de..ae47d921602 100644 --- a/configs/sama5d3xek_spiflash_defconfig +++ b/configs/sama5d3xek_spiflash_defconfig @@ -26,6 +26,8 @@ CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 @@ -34,10 +36,20 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(boots CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x60000 0xc000; sf read 0x22000000 0x6c000 0x394000; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x318000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index c217d6d439b..c1623df8649 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -33,7 +35,17 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_name}.dtb; fi; fatload mmc 0:1 0x21000000 ${dtb_name}; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 5c62a7f6aee..b1265331c8a 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -21,6 +21,8 @@ CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 @@ -30,10 +32,20 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="nand read 0x21000000 0x180000 0x80000;nand read 0x22000000 0x200000 0x600000;bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_BASE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index 60bd2eb8f1b..ec79771ee7c 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -26,6 +26,8 @@ CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 @@ -35,10 +37,20 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x60000 0xc000; sf read 0x22000000 0x6c000 0x394000; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADS is not set diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index c36175c8cec..b25df5c94c1 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -24,6 +24,8 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 @@ -34,7 +36,17 @@ CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_ # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 7c544017cfe..a3bfee316da 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -21,6 +21,8 @@ CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 @@ -31,10 +33,20 @@ CONFIG_BOOTCOMMAND="nand read 0x21000000 0x180000 0x80000;nand read 0x22000000 0 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_BASE=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index 0b86976df9e..06e5bb2e032 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -26,6 +26,8 @@ CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ee0 CONFIG_FIT=y CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 @@ -34,10 +36,20 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(boots CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x21000000 0x60000 0xc000; sf read 0x22000000 0x6c000 0x394000; bootz 0x22000000 - 0x21000000" # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_MAX_SIZE=0x18000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x218000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/sama7g5ek_mmc1_defconfig b/configs/sama7g5ek_mmc1_defconfig index 42d96f7c022..367cc48bba6 100644 --- a/configs/sama7g5ek_mmc1_defconfig +++ b/configs/sama7g5ek_mmc1_defconfig @@ -15,6 +15,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_MEMTEST_START=0x60000000 CONFIG_SYS_MEMTEST_END=0x70000000 CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x60014ef0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_USE_BOOTARGS=y @@ -23,6 +25,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fatload mmc 1:1 0x61000000 at91-sama7g5ek.dtb; fatload mmc 1:1 0x62000000 zImage; bootz 0x62000000 - 0x61000000" CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set CONFIG_CMD_MD5SUM=y diff --git a/configs/sama7g5ek_mmc_defconfig b/configs/sama7g5ek_mmc_defconfig index e03a6ba9af4..1de21b74a46 100644 --- a/configs/sama7g5ek_mmc_defconfig +++ b/configs/sama7g5ek_mmc_defconfig @@ -15,6 +15,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_MEMTEST_START=0x60000000 CONFIG_SYS_MEMTEST_END=0x70000000 CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x60014ef0 CONFIG_FIT=y CONFIG_SD_BOOT=y CONFIG_USE_BOOTARGS=y @@ -23,6 +25,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x61000000 at91-sama7g5ek.dtb; fatload mmc 0:1 0x62000000 zImage; bootz 0x62000000 - 0x61000000" CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set CONFIG_CMD_MD5SUM=y diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig index c9430da0f09..c718374ed58 100644 --- a/configs/sandbox_noinst_defconfig +++ b/configs/sandbox_noinst_defconfig @@ -29,6 +29,7 @@ CONFIG_BOOTSTAGE_STASH_SIZE=0x4096 CONFIG_CONSOLE_RECORD=y CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000 CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_HANDOFF=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 13a76e89ea5..45a6b81a3d2 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -29,6 +29,7 @@ CONFIG_BOOTSTAGE_STASH_SIZE=0x4096 CONFIG_CONSOLE_RECORD=y CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000 CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_HANDOFF=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/sandbox_vpl_defconfig b/configs/sandbox_vpl_defconfig index e4ec16b3c92..c91ee2af71f 100644 --- a/configs/sandbox_vpl_defconfig +++ b/configs/sandbox_vpl_defconfig @@ -33,6 +33,7 @@ CONFIG_BOOTSTAGE_STASH_SIZE=0x4096 CONFIG_CONSOLE_RECORD=y CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000 CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_HANDOFF=y CONFIG_SPL_BOARD_INIT=y CONFIG_TPL_SYS_MALLOC_SIMPLE=y diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index f3d3b0a4980..f9864febcb0 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -12,7 +12,17 @@ CONFIG_TARGET_SEABOARD=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_USE_PREBOOT=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2086 # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/seeed_npi_imx6ull_defconfig b/configs/seeed_npi_imx6ull_defconfig index 4cf79c5b7ee..e12a7d85060 100644 --- a/configs/seeed_npi_imx6ull_defconfig +++ b/configs/seeed_npi_imx6ull_defconfig @@ -20,11 +20,14 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_MEMTEST=y CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y diff --git a/configs/sei510_defconfig b/configs/sei510_defconfig index e9f5781248f..79a215fe9e8 100644 --- a/configs/sei510_defconfig +++ b/configs/sei510_defconfig @@ -16,6 +16,8 @@ CONFIG_IDENT_STRING=" sei510" # CONFIG_PSCI_RESET is not set CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y @@ -24,6 +26,7 @@ CONFIG_PREBOOT="run load_logo" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y CONFIG_AVB_VERIFY=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set CONFIG_CMD_ADTIMG=y CONFIG_CMD_ABOOTIMG=y diff --git a/configs/sei610_defconfig b/configs/sei610_defconfig index 93b9008383d..a5b28c27745 100644 --- a/configs/sei610_defconfig +++ b/configs/sei610_defconfig @@ -16,6 +16,8 @@ CONFIG_IDENT_STRING=" sei610" # CONFIG_PSCI_RESET is not set CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y CONFIG_USE_PREBOOT=y @@ -24,6 +26,7 @@ CONFIG_PREBOOT="run load_logo" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y CONFIG_AVB_VERIFY=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set CONFIG_CMD_ADTIMG=y CONFIG_CMD_ABOOTIMG=y diff --git a/configs/sfr_nb4-ser_ram_defconfig b/configs/sfr_nb4-ser_ram_defconfig index 8ff982bd78a..6f261882faa 100644 --- a/configs/sfr_nb4-ser_ram_defconfig +++ b/configs/sfr_nb4-ser_ram_defconfig @@ -18,8 +18,12 @@ CONFIG_MIPS_BOOT_FDT=y CONFIG_REMAKE_ELF=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DISPLAY_CPUINFO=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="NB4-SER # " +CONFIG_SYS_MAXARGS=24 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=539 CONFIG_CMD_CPU=y CONFIG_CMD_LICENSE=y # CONFIG_CMD_BOOTD is not set diff --git a/configs/sheep-rk3368_defconfig b/configs/sheep-rk3368_defconfig index 80f599d3a39..0411f26d1be 100644 --- a/configs/sheep-rk3368_defconfig +++ b/configs/sheep-rk3368_defconfig @@ -11,10 +11,14 @@ CONFIG_DEBUG_UART_BASE=0xFF1b0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-sheep.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_CMD_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_REGMAP=y diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index 0477cd79e3e..d014b2a8144 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -13,6 +13,8 @@ CONFIG_ENV_OFFSET=0x80000 CONFIG_DEFAULT_DEVICE_TREE="kirkwood-sheevaplug" CONFIG_IDENT_STRING="\nMarvell-Sheevaplug" CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 # CONFIG_SYS_MALLOC_F is not set CONFIG_HAS_BOARD_SIZE_LIMIT=y CONFIG_BOARD_SIZE_LIMIT=524288 @@ -22,6 +24,7 @@ CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_boota CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y diff --git a/configs/sifive_unleashed_defconfig b/configs/sifive_unleashed_defconfig index fe2227e596b..84bc49c0f23 100644 --- a/configs/sifive_unleashed_defconfig +++ b/configs/sifive_unleashed_defconfig @@ -14,6 +14,8 @@ CONFIG_TARGET_SIFIVE_UNLEASHED=y CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000 CONFIG_USE_PREBOOT=y @@ -22,9 +24,16 @@ CONFIG_DEFAULT_FDT_FILE="sifive/hifive-unleashed-a00.dtb" CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x100000 +CONFIG_SPL_BSS_START_ADDR=0x85000000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x81cfe70 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_DM_RESET=y CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_CLK=y diff --git a/configs/sifive_unmatched_defconfig b/configs/sifive_unmatched_defconfig index 5d070843bc0..02d4e54b071 100644 --- a/configs/sifive_unmatched_defconfig +++ b/configs/sifive_unmatched_defconfig @@ -17,6 +17,8 @@ CONFIG_TARGET_SIFIVE_UNMATCHED=y CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000 CONFIG_USE_PREBOOT=y @@ -26,9 +28,16 @@ CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ID_EEPROM=y +CONFIG_SPL_MAX_SIZE=0x100000 +CONFIG_SPL_BSS_START_ADDR=0x85000000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x81cfe60 +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_DM_RESET=y CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_EEPROM=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_PWM=y diff --git a/configs/silinux_ek874_defconfig b/configs/silinux_ek874_defconfig index 099a200539f..24fcfae4ef2 100644 --- a/configs/silinux_ek874_defconfig +++ b/configs/silinux_ek874_defconfig @@ -23,7 +23,15 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a774c0-ek874.dtb; booti 0x48080000 - 0x48000000" CONFIG_DEFAULT_FDT_FILE="r8a774c0-ek874.dtb" # CONFIG_BOARD_EARLY_INIT_F is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0xe631f000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6304000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2068 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/silk_defconfig b/configs/silk_defconfig index 9ae358d97a7..ac827ff2027 100644 --- a/configs/silk_defconfig +++ b/configs/silk_defconfig @@ -26,16 +26,24 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x50000000 CONFIG_ENV_ADDR=0xC0000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4f000000 CONFIG_FIT=y CONFIG_BOOTDELAY=3 +CONFIG_SPL_MAX_SIZE=0x4000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6340000 CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=256 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/sipeed_maix_bitm_defconfig b/configs/sipeed_maix_bitm_defconfig index 7d1722c8833..731665723a1 100644 --- a/configs/sipeed_maix_bitm_defconfig +++ b/configs/sipeed_maix_bitm_defconfig @@ -6,11 +6,15 @@ CONFIG_ENV_SECT_SIZE=0x1000 CONFIG_SYS_LOAD_ADDR=0x80000000 CONFIG_TARGET_SIPEED_MAIX=y CONFIG_ARCH_RV64I=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x803fffff CONFIG_STACK_SIZE=0x100000 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run k210_bootcmd" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_MTDIDS_DEFAULT="nor0=spi3:0" CONFIG_MTDPARTS_DEFAULT="nor0:1M(u-boot),0x1000@0xfff000(env)" # CONFIG_NET is not set diff --git a/configs/sipeed_maix_smode_defconfig b/configs/sipeed_maix_smode_defconfig index 0008f5cfa7e..ab2b3532e6b 100644 --- a/configs/sipeed_maix_smode_defconfig +++ b/configs/sipeed_maix_smode_defconfig @@ -8,10 +8,14 @@ CONFIG_SYS_LOAD_ADDR=0x80000000 CONFIG_TARGET_SIPEED_MAIX=y CONFIG_ARCH_RV64I=y CONFIG_RISCV_SMODE=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x803fffff CONFIG_STACK_SIZE=0x100000 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run k210_bootcmd" CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_MTDIDS_DEFAULT="nor0=spi3:0" CONFIG_MTDPARTS_DEFAULT="nor0:1M(u-boot),0x1000@0xfff000(env)" # CONFIG_NET is not set diff --git a/configs/slimbootloader_defconfig b/configs/slimbootloader_defconfig index 5988777fb90..2e938b64867 100644 --- a/configs/slimbootloader_defconfig +++ b/configs/slimbootloader_defconfig @@ -13,6 +13,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_BOOTP_BOOTFILESIZE=y diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index 3cf30ddd766..57c5218d4b0 100644 --- a/configs/smartweb_defconfig +++ b/configs/smartweb_defconfig @@ -32,12 +32,26 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run flashboot" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x1000 +CONFIG_SPL_PAD_TO=0x20000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x301000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x460000 CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y +CONFIG_SPL_NAND_SOFTECC=y CONFIG_SPL_NAND_BASE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=537 # CONFIG_CMD_IMI is not set CONFIG_CMD_DFU=y # CONFIG_CMD_LOADS is not set diff --git a/configs/smdk5250_defconfig b/configs/smdk5250_defconfig index 31332af41d4..cbbf13526c1 100644 --- a/configs/smdk5250_defconfig +++ b/configs/smdk5250_defconfig @@ -20,12 +20,17 @@ CONFIG_SPL=y CONFIG_IDENT_STRING=" for SMDK5250" CONFIG_SYS_LOAD_ADDR=0x43e00000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2050000 CONFIG_FIT=y CONFIG_FIT_BEST_MATCH=y CONFIG_SILENT_CONSOLE=y CONFIG_CONSOLE_MUX=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3800 CONFIG_SYS_PROMPT="SMDK5250 # " +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/smdk5420_defconfig b/configs/smdk5420_defconfig index 7f2e42a3a52..7cf2cd5b566 100644 --- a/configs/smdk5420_defconfig +++ b/configs/smdk5420_defconfig @@ -18,12 +18,17 @@ CONFIG_SPL=y CONFIG_IDENT_STRING=" for SMDK5420" CONFIG_SYS_LOAD_ADDR=0x23e00000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2073800 CONFIG_FIT=y CONFIG_FIT_BEST_MATCH=y CONFIG_SILENT_CONSOLE=y CONFIG_CONSOLE_MUX=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x7800 CONFIG_SYS_PROMPT="SMDK5420 # " +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig index 2fe065e9fc5..2c8bd1c8ee2 100644 --- a/configs/smdkc100_defconfig +++ b/configs/smdkc100_defconfig @@ -12,6 +12,8 @@ CONFIG_IDENT_STRING=" for SMDKC100" CONFIG_SYS_CLK_FREQ=12000000 CONFIG_SYS_LOAD_ADDR=0x30000000 CONFIG_ENV_ADDR=0x40000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2f000000 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mtdblock5 ubi.mtd=4 rootfstype=cramfs console=ttySAC0,115200n8 mem=128M mtdparts=s3c-onenand:256k(bootloader),128k@0x40000(params),3m@0x60000(kernel),16m@0x360000(test),-(UBI)" @@ -20,6 +22,8 @@ CONFIG_BOOTCOMMAND="run ubifsboot" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="SMDKC100 # " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=384 # CONFIG_CMD_FLASH is not set CONFIG_CMD_ONENAND=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/smdkv310_defconfig b/configs/smdkv310_defconfig index 55528cc5f8e..17fc2c41e95 100644 --- a/configs/smdkv310_defconfig +++ b/configs/smdkv310_defconfig @@ -15,9 +15,14 @@ CONFIG_SPL=y CONFIG_IDENT_STRING=" for SMDKC210/V310" CONFIG_SYS_LOAD_ADDR=0x43e00000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2040000 CONFIG_BOOTCOMMAND="fatload mmc 0 40007000 uImage; bootm 40007000" # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3800 CONFIG_SYS_PROMPT="SMDKV310 # " +CONFIG_SYS_PBSIZE=1024 # CONFIG_CMD_XIMG is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/smegw01_defconfig b/configs/smegw01_defconfig index d5d1791d48f..25a75d1aa5a 100644 --- a/configs/smegw01_defconfig +++ b/configs/smegw01_defconfig @@ -20,6 +20,8 @@ CONFIG_FIT_VERBOSE=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="if run loadimage; then run mmcboot; fi; " CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig index 4c93ba4e057..9fb55dc9af3 100644 --- a/configs/snapper9260_defconfig +++ b/configs/snapper9260_defconfig @@ -20,6 +20,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 ip=any" CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Snapper> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig index 34f563c3ddf..aa765c41779 100644 --- a/configs/snapper9g20_defconfig +++ b/configs/snapper9g20_defconfig @@ -19,6 +19,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 ip=any" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig index 6d63d30d522..e2725f4a22f 100644 --- a/configs/sniper_defconfig +++ b/configs/sniper_defconfig @@ -9,14 +9,25 @@ CONFIG_SPL_TEXT_BASE=0x40200000 CONFIG_TARGET_SNIPER=y CONFIG_SPL=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00 CONFIG_BOOTCOMMAND="setenv boot_mmc_part ${kernel_mmc_part}; if test reboot-${reboot-mode} = reboot-r; then echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; if test reboot-${reboot-mode} = reboot-b; then echo fastboot; fastboot 0; fi; part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; mmc dev ${boot_mmc_dev}; mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && bootm ${kernel_addr_r};" CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SPL_MAX_SIZE=0xec00 +CONFIG_SPL_BSS_START_ADDR=0x80000000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4020fffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=2 # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SYS_PROMPT="sniper # " +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=538 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/snow_defconfig b/configs/snow_defconfig index e7cf8d87222..4377a58130e 100644 --- a/configs/snow_defconfig +++ b/configs/snow_defconfig @@ -23,11 +23,16 @@ CONFIG_IDENT_STRING=" for snow" CONFIG_SYS_LOAD_ADDR=0x43e00000 CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2050000 CONFIG_FIT=y CONFIG_FIT_BEST_MATCH=y CONFIG_SILENT_CONSOLE=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3800 CONFIG_SYS_PROMPT="snow # " +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/socfpga_agilex_atf_defconfig b/configs/socfpga_agilex_atf_defconfig index f1ae3c3349d..e20789a6b46 100644 --- a/configs/socfpga_agilex_atf_defconfig +++ b/configs/socfpga_agilex_atf_defconfig @@ -14,6 +14,8 @@ CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y CONFIG_IDENT_STRING="socfpga_agilex" CONFIG_SPL_FS_FAT=y CONFIG_SYS_LOAD_ADDR=0x02000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y CONFIG_SPL_FIT_SIGNATURE=y @@ -25,14 +27,27 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="earlycon" CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run mmcfitboot" +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x3ff00000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffe3f000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 CONFIG_SPL_CRC32=y CONFIG_SPL_CACHE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_SPL_TARGET="spl/u-boot-spl-dtb.hex" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="SOCFPGA_AGILEX # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2082 CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/socfpga_agilex_defconfig b/configs/socfpga_agilex_defconfig index bfbbd9bfdde..7ae2b164a02 100644 --- a/configs/socfpga_agilex_defconfig +++ b/configs/socfpga_agilex_defconfig @@ -16,17 +16,32 @@ CONFIG_SPL_FS_FAT=y CONFIG_SYS_LOAD_ADDR=0x02000000 CONFIG_SYS_MEMTEST_START=0x00000000 CONFIG_SYS_MEMTEST_END=0x3fe00000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x101000 CONFIG_REMAKE_ELF=y CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="earlycon" CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run fatscript; run mmcload; run linux_qspi_enable; run mmcboot" +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x3ff00000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffe3f000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 CONFIG_SPL_CACHE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x3c00000 +CONFIG_SPL_TARGET="spl/u-boot-spl-dtb.hex" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="SOCFPGA_AGILEX # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2082 CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/socfpga_agilex_vab_defconfig b/configs/socfpga_agilex_vab_defconfig index d29b51729dd..539548bfcbb 100644 --- a/configs/socfpga_agilex_vab_defconfig +++ b/configs/socfpga_agilex_vab_defconfig @@ -15,6 +15,8 @@ CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y CONFIG_IDENT_STRING="socfpga_agilex" CONFIG_SPL_FS_FAT=y CONFIG_SYS_LOAD_ADDR=0x02000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y CONFIG_SPL_FIT_SIGNATURE=y @@ -26,14 +28,27 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="earlycon" CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run mmcfitboot" +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x3ff00000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffe3f000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 CONFIG_SPL_CRC32=y CONFIG_SPL_CACHE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_SPL_TARGET="spl/u-boot-spl-dtb.hex" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="SOCFPGA_AGILEX # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2082 CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig index 1be9a2df083..c98c106851f 100644 --- a/configs/socfpga_arria10_defconfig +++ b/configs/socfpga_arria10_defconfig @@ -11,6 +11,8 @@ CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y CONFIG_IDENT_STRING="socfpga_arria10" CONFIG_SPL_FS_FAT=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xffe2b000 CONFIG_FIT=y CONFIG_TIMESTAMP=y CONFIG_SPL_FIT=y @@ -24,8 +26,17 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x40000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffe2b000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xffe2b000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x15000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FPGA=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set diff --git a/configs/socfpga_arria5_defconfig b/configs/socfpga_arria5_defconfig index dafeafff3e7..24c21090b19 100644 --- a/configs/socfpga_arria5_defconfig +++ b/configs/socfpga_arria5_defconfig @@ -8,6 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_socdk" CONFIG_SPL_TEXT_BASE=0xFFFF0000 CONFIG_TARGET_SOCFPGA_ARRIA5_SOCDK=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_TIMESTAMP=y # CONFIG_USE_BOOTCOMMAND is not set @@ -18,8 +20,13 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x0 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DFU=y diff --git a/configs/socfpga_cyclone5_defconfig b/configs/socfpga_cyclone5_defconfig index b09672d8a2f..d010b54240d 100644 --- a/configs/socfpga_cyclone5_defconfig +++ b/configs/socfpga_cyclone5_defconfig @@ -8,6 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk" CONFIG_SPL_TEXT_BASE=0xFFFF0000 CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_TIMESTAMP=y # CONFIG_USE_BOOTCOMMAND is not set @@ -18,8 +20,13 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x0 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DFU=y diff --git a/configs/socfpga_dbm_soc1_defconfig b/configs/socfpga_dbm_soc1_defconfig index a8ef2e934ad..a1574b6a5d7 100644 --- a/configs/socfpga_dbm_soc1_defconfig +++ b/configs/socfpga_dbm_soc1_defconfig @@ -7,6 +7,8 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_dbm_soc1" CONFIG_SPL_TEXT_BASE=0xFFFF0000 CONFIG_TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_TIMESTAMP=y CONFIG_USE_BOOTARGS=y @@ -21,9 +23,14 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x0 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/configs/socfpga_de0_nano_soc_defconfig b/configs/socfpga_de0_nano_soc_defconfig index 2e5bd80d2ef..ec7355d2cc4 100644 --- a/configs/socfpga_de0_nano_soc_defconfig +++ b/configs/socfpga_de0_nano_soc_defconfig @@ -8,6 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc" CONFIG_SPL_TEXT_BASE=0xFFFF0000 CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_TIMESTAMP=y # CONFIG_USE_BOOTCOMMAND is not set @@ -18,9 +20,14 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x0 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DFU=y diff --git a/configs/socfpga_de10_nano_defconfig b/configs/socfpga_de10_nano_defconfig index 95b4ef638ec..b62f0299628 100644 --- a/configs/socfpga_de10_nano_defconfig +++ b/configs/socfpga_de10_nano_defconfig @@ -8,6 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de10_nano" CONFIG_SPL_TEXT_BASE=0xFFFF0000 CONFIG_TARGET_SOCFPGA_TERASIC_DE10_NANO=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_TIMESTAMP=y # CONFIG_USE_BOOTCOMMAND is not set @@ -18,8 +20,13 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x0 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DFU=y diff --git a/configs/socfpga_de10_standard_defconfig b/configs/socfpga_de10_standard_defconfig index 91bd49840d8..b8bc9da4d0e 100644 --- a/configs/socfpga_de10_standard_defconfig +++ b/configs/socfpga_de10_standard_defconfig @@ -8,6 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de10_standard" CONFIG_SPL_TEXT_BASE=0xFFFF0000 CONFIG_TARGET_SOCFPGA_TERASIC_DE10_STANDARD=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_TIMESTAMP=y # CONFIG_USE_BOOTCOMMAND is not set @@ -18,8 +20,13 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x0 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DFU=y diff --git a/configs/socfpga_de1_soc_defconfig b/configs/socfpga_de1_soc_defconfig index 75e16be42a9..749ec540b4f 100644 --- a/configs/socfpga_de1_soc_defconfig +++ b/configs/socfpga_de1_soc_defconfig @@ -8,6 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de1_soc" CONFIG_SPL_TEXT_BASE=0xFFFF0000 CONFIG_TARGET_SOCFPGA_TERASIC_DE1_SOC=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_TIMESTAMP=y # CONFIG_USE_BOOTCOMMAND is not set @@ -18,8 +20,13 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x0 CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set diff --git a/configs/socfpga_is1_defconfig b/configs/socfpga_is1_defconfig index 53e9a7296cf..c3b6368f617 100644 --- a/configs/socfpga_is1_defconfig +++ b/configs/socfpga_is1_defconfig @@ -10,6 +10,8 @@ CONFIG_SPL_TEXT_BASE=0xFFFF0000 CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8 CONFIG_TARGET_SOCFPGA_IS1=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_TIMESTAMP=y CONFIG_USE_BOOTARGS=y @@ -21,8 +23,13 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffff8 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set diff --git a/configs/socfpga_mcvevk_defconfig b/configs/socfpga_mcvevk_defconfig index 07ca4bf954b..18e125f5bdf 100644 --- a/configs/socfpga_mcvevk_defconfig +++ b/configs/socfpga_mcvevk_defconfig @@ -8,6 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_mcvevk" CONFIG_SPL_TEXT_BASE=0xFFFF0000 CONFIG_TARGET_SOCFPGA_ARIES_MCVEVK=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_TIMESTAMP=y CONFIG_USE_BOOTARGS=y @@ -19,8 +21,13 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x0 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DFU=y diff --git a/configs/socfpga_n5x_atf_defconfig b/configs/socfpga_n5x_atf_defconfig index 50b3319561e..77d868a74ae 100644 --- a/configs/socfpga_n5x_atf_defconfig +++ b/configs/socfpga_n5x_atf_defconfig @@ -13,6 +13,8 @@ CONFIG_SPL_TEXT_BASE=0xFFE00000 CONFIG_TARGET_SOCFPGA_N5X_SOCDK=y CONFIG_IDENT_STRING="socfpga_n5x" CONFIG_SPL_FS_FAT=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y CONFIG_SPL_FIT_SIGNATURE=y @@ -24,14 +26,27 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="earlycon panic=-1 earlyprintk=ttyS0,115200" CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run mmcfitboot" +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x3ff00000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffe3f000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 CONFIG_SPL_CRC32=y CONFIG_SPL_CACHE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_SPL_TARGET="spl/u-boot-spl-dtb.hex" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="SOCFPGA_N5X # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2079 CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/socfpga_n5x_defconfig b/configs/socfpga_n5x_defconfig index 8cdf65dbee1..92d6045c6a7 100644 --- a/configs/socfpga_n5x_defconfig +++ b/configs/socfpga_n5x_defconfig @@ -13,17 +13,32 @@ CONFIG_TARGET_SOCFPGA_N5X_SOCDK=y CONFIG_IDENT_STRING="socfpga_n5x" CONFIG_SPL_FS_FAT=y # CONFIG_PSCI_RESET is not set +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x101000 CONFIG_REMAKE_ELF=y CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="earlycon panic=-1 earlyprintk=ttyS0,115200" CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run fatscript; run mmcload; run linux_qspi_enable; run mmcboot" +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x3ff00000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffe3f000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 CONFIG_SPL_CACHE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x3c00000 +CONFIG_SPL_TARGET="spl/u-boot-spl-dtb.hex" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="SOCFPGA_N5X # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2079 CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/socfpga_n5x_vab_defconfig b/configs/socfpga_n5x_vab_defconfig index 04942e4fd9d..d3a9042ef22 100644 --- a/configs/socfpga_n5x_vab_defconfig +++ b/configs/socfpga_n5x_vab_defconfig @@ -14,6 +14,8 @@ CONFIG_SOCFPGA_SECURE_VAB_AUTH=y CONFIG_TARGET_SOCFPGA_N5X_SOCDK=y CONFIG_IDENT_STRING="socfpga_n5x" CONFIG_SPL_FS_FAT=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y CONFIG_SPL_FIT_SIGNATURE=y @@ -25,14 +27,27 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="earlycon panic=-1 earlyprintk=ttyS0,115200" CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run mmcfitboot" +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x3ff00000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffe3f000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 CONFIG_SPL_CRC32=y CONFIG_SPL_CACHE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_SPL_TARGET="spl/u-boot-spl-dtb.hex" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="SOCFPGA_N5X # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2079 CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/socfpga_secu1_defconfig b/configs/socfpga_secu1_defconfig index 641d205093a..72cf0d1bc88 100644 --- a/configs/socfpga_secu1_defconfig +++ b/configs/socfpga_secu1_defconfig @@ -16,6 +16,8 @@ CONFIG_ENV_OFFSET_REDUND=0x120000 CONFIG_SYS_LOAD_ADDR=0x02000000 CONFIG_BUILD_TARGET="u-boot-with-nand-spl.sfp" CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_BOOT_RETRY=y CONFIG_BOOT_RETRY_TIME=45 @@ -31,11 +33,16 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x0 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x1 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE is not set CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y diff --git a/configs/socfpga_sockit_defconfig b/configs/socfpga_sockit_defconfig index e245288b92a..2a02f1dbfaa 100644 --- a/configs/socfpga_sockit_defconfig +++ b/configs/socfpga_sockit_defconfig @@ -8,6 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sockit" CONFIG_SPL_TEXT_BASE=0xFFFF0000 CONFIG_TARGET_SOCFPGA_TERASIC_SOCKIT=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_TIMESTAMP=y # CONFIG_USE_BOOTCOMMAND is not set @@ -18,8 +20,13 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x0 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DFU=y diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig index 70441864691..3d0c48d7662 100644 --- a/configs/socfpga_socrates_defconfig +++ b/configs/socfpga_socrates_defconfig @@ -8,6 +8,8 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates" CONFIG_SPL_TEXT_BASE=0xFFFF0000 CONFIG_TARGET_SOCFPGA_EBV_SOCRATES=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_socrates.dtb" @@ -17,8 +19,13 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x0 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_DFU=y diff --git a/configs/socfpga_sr1500_defconfig b/configs/socfpga_sr1500_defconfig index b0be0339538..53d6b82972f 100644 --- a/configs/socfpga_sr1500_defconfig +++ b/configs/socfpga_sr1500_defconfig @@ -13,6 +13,8 @@ CONFIG_ENV_OFFSET_REDUND=0xF0000 CONFIG_SYS_MEMTEST_START=0x00000000 CONFIG_SYS_MEMTEST_END=0x40000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_TIMESTAMP=y # CONFIG_USE_BOOTCOMMAND is not set @@ -25,8 +27,13 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_CLOCKS=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffff8 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y diff --git a/configs/socfpga_stratix10_atf_defconfig b/configs/socfpga_stratix10_atf_defconfig index 6d2f4736c60..e4d8a2e049a 100644 --- a/configs/socfpga_stratix10_atf_defconfig +++ b/configs/socfpga_stratix10_atf_defconfig @@ -14,6 +14,8 @@ CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y CONFIG_IDENT_STRING="socfpga_stratix10" CONFIG_SPL_FS_FAT=y CONFIG_SYS_LOAD_ADDR=0x02000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y CONFIG_SPL_FIT_SIGNATURE=y @@ -25,13 +27,26 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="earlycon" CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run mmcfitboot" +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x3ff00000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffe3f000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 CONFIG_SPL_CRC32=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_SPL_TARGET="spl/u-boot-spl-dtb.hex" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="SOCFPGA_STRATIX10 # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2085 CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/socfpga_stratix10_defconfig b/configs/socfpga_stratix10_defconfig index 8e16c2bfbb3..6aff07d7784 100644 --- a/configs/socfpga_stratix10_defconfig +++ b/configs/socfpga_stratix10_defconfig @@ -18,16 +18,31 @@ CONFIG_SYS_MEMTEST_START=0x00000000 CONFIG_SYS_MEMTEST_END=0x3fe00000 CONFIG_OPTIMIZE_INLINING=y CONFIG_SPL_OPTIMIZE_INLINING=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x101000 CONFIG_REMAKE_ELF=y CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="earlycon" CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run fatscript; run mmcload; run linux_qspi_enable; run mmcboot" +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x3ff00000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffe3f000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x3C00000 +CONFIG_SPL_TARGET="spl/u-boot-spl-dtb.hex" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="SOCFPGA_STRATIX10 # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2085 CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/socfpga_vining_fpga_defconfig b/configs/socfpga_vining_fpga_defconfig index 331975ad309..0f4aa905147 100644 --- a/configs/socfpga_vining_fpga_defconfig +++ b/configs/socfpga_vining_fpga_defconfig @@ -10,6 +10,8 @@ CONFIG_SPL_TEXT_BASE=0xFFFF0000 CONFIG_TARGET_SOCFPGA_SOFTING_VINING_FPGA=y CONFIG_ENV_OFFSET_REDUND=0x110000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_FIT=y CONFIG_TIMESTAMP=y CONFIG_BOOTDELAY=5 @@ -25,9 +27,14 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CLOCKS=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_PAD_TO=0x10000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x0 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_CMDLINE_PS_SUPPORT=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig index 2abb81c53b4..d902019d6cd 100644 --- a/configs/socrates_defconfig +++ b/configs/socrates_defconfig @@ -21,6 +21,7 @@ CONFIG_PREBOOT="echo;echo Welcome on the ABB Socrates Board;echo" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_REGINFO=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set diff --git a/configs/som-db5800-som-6867_defconfig b/configs/som-db5800-som-6867_defconfig index fb630bddc79..3b96d64b3b6 100644 --- a/configs/som-db5800-som-6867_defconfig +++ b/configs/som-db5800-som-6867_defconfig @@ -28,6 +28,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_PART=y diff --git a/configs/somlabs_visionsom_6ull_defconfig b/configs/somlabs_visionsom_6ull_defconfig index 33b17912135..b99266fec74 100644 --- a/configs/somlabs_visionsom_6ull_defconfig +++ b/configs/somlabs_visionsom_6ull_defconfig @@ -16,6 +16,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run setfdtfile; run checkbootdev; run loadfdt;if run loadbootscript; then run bootscript; else if run loadimage; then run setbootargs; bootz ${loadaddr} - ${fdt_addr}; fi; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y diff --git a/configs/sopine_baseboard_defconfig b/configs/sopine_baseboard_defconfig index fbbef7a9f9a..576e86493a2 100644 --- a/configs/sopine_baseboard_defconfig +++ b/configs/sopine_baseboard_defconfig @@ -11,6 +11,8 @@ CONFIG_MMC0_CD_PIN="" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SUN8I_EMAC=y diff --git a/configs/spring_defconfig b/configs/spring_defconfig index 8f4a8a1e5d0..ad017564d99 100644 --- a/configs/spring_defconfig +++ b/configs/spring_defconfig @@ -23,11 +23,16 @@ CONFIG_IDENT_STRING=" for spring" CONFIG_SYS_LOAD_ADDR=0x43e00000 CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2050000 CONFIG_FIT=y CONFIG_FIT_BEST_MATCH=y CONFIG_SILENT_CONSOLE=y # CONFIG_SPL_FRAMEWORK is not set +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3800 CONFIG_SYS_PROMPT="spring # " +CONFIG_SYS_PBSIZE=1024 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/starqltechn_defconfig b/configs/starqltechn_defconfig index 608d001b6df..2d07767b61b 100644 --- a/configs/starqltechn_defconfig +++ b/configs/starqltechn_defconfig @@ -14,6 +14,9 @@ CONFIG_SAVE_PREV_BL_FDT_ADDR=y CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GPIO=y CONFIG_CMD_BMP=y # CONFIG_NET is not set diff --git a/configs/stemmy_defconfig b/configs/stemmy_defconfig index f49f970bec7..28a31298737 100644 --- a/configs/stemmy_defconfig +++ b/configs/stemmy_defconfig @@ -10,11 +10,15 @@ CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_NR_DRAM_BANKS=2 CONFIG_DEFAULT_DEVICE_TREE="ste-ux500-samsung-stemmy" CONFIG_SYS_LOAD_ADDR=0x100000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run fastbootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_CONFIG=y CONFIG_CMD_LICENSE=y CONFIG_CMD_DM=y diff --git a/configs/stih410-b2260_defconfig b/configs/stih410-b2260_defconfig index 642c199c5cb..198a0c7f9e5 100644 --- a/configs/stih410-b2260_defconfig +++ b/configs/stih410-b2260_defconfig @@ -10,12 +10,15 @@ CONFIG_DEFAULT_DEVICE_TREE="stih410-b2260" CONFIG_IDENT_STRING="STMicroelectronics STiH410-B2260" CONFIG_SYS_LOAD_ADDR=0x40000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7bdfff10 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAS1,115200 CONSOLE=/dev/ttyAS1 consoleblank=0 root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait mem=992M@0x40000000 vmalloc=256m" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="stih410-b2260 => " +CONFIG_SYS_PBSIZE=1058 CONFIG_CMD_ASKENV=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y diff --git a/configs/stm32746g-eval_defconfig b/configs/stm32746g-eval_defconfig index b2820149a32..e799fc552e5 100644 --- a/configs/stm32746g-eval_defconfig +++ b/configs/stm32746g-eval_defconfig @@ -10,6 +10,8 @@ CONFIG_STM32F7=y CONFIG_TARGET_STM32F746_DISCO=y CONFIG_SYS_LOAD_ADDR=0x8008000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20050000 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" @@ -18,7 +20,9 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_PAD_TO=0x8000 CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set CONFIG_CMD_MMC=y diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig index 6ec0b3cf599..55e44f863c1 100644 --- a/configs/stm32746g-eval_spl_defconfig +++ b/configs/stm32746g-eval_spl_defconfig @@ -18,6 +18,8 @@ CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x8008000 CONFIG_BUILD_TARGET="u-boot-with-spl.bin" CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20050000 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" @@ -26,12 +28,16 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_PAD_TO=0x8000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_XIP_SUPPORT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000 CONFIG_SPL_DM_RESET=y CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set CONFIG_CMD_MMC=y diff --git a/configs/stm32f429-discovery_defconfig b/configs/stm32f429-discovery_defconfig index c48052ab13a..fde427ae692 100644 --- a/configs/stm32f429-discovery_defconfig +++ b/configs/stm32f429-discovery_defconfig @@ -12,6 +12,8 @@ CONFIG_TARGET_STM32F429_DISCOVERY=y CONFIG_SYS_LOAD_ADDR=0x90400000 CONFIG_ENV_ADDR=0x8040000 CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10010000 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" @@ -20,6 +22,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_IMLS=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TIMER=y diff --git a/configs/stm32f429-evaluation_defconfig b/configs/stm32f429-evaluation_defconfig index 2217584a3c7..e2c41b0844e 100644 --- a/configs/stm32f429-evaluation_defconfig +++ b/configs/stm32f429-evaluation_defconfig @@ -10,10 +10,13 @@ CONFIG_STM32F4=y CONFIG_TARGET_STM32F429_EVALUATION=y CONFIG_SYS_LOAD_ADDR=0x400000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10010000 CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_IMLS=y CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set diff --git a/configs/stm32f469-discovery_defconfig b/configs/stm32f469-discovery_defconfig index 8af71302b25..c7dbc69fa88 100644 --- a/configs/stm32f469-discovery_defconfig +++ b/configs/stm32f469-discovery_defconfig @@ -10,10 +10,13 @@ CONFIG_STM32F4=y CONFIG_TARGET_STM32F469_DISCOVERY=y CONFIG_SYS_LOAD_ADDR=0x400000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10010000 CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_IMLS=y CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig index 64d7d18a69a..fe5f82c93c9 100644 --- a/configs/stm32f746-disco_defconfig +++ b/configs/stm32f746-disco_defconfig @@ -10,6 +10,8 @@ CONFIG_STM32F7=y CONFIG_TARGET_STM32F746_DISCO=y CONFIG_SYS_LOAD_ADDR=0x8008000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20050000 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" @@ -18,7 +20,9 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_PAD_TO=0x8000 CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set CONFIG_CMD_MMC=y diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig index c417a4ff75b..c174984b939 100644 --- a/configs/stm32f746-disco_spl_defconfig +++ b/configs/stm32f746-disco_spl_defconfig @@ -18,6 +18,8 @@ CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x8008000 CONFIG_BUILD_TARGET="u-boot-with-spl.bin" CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20050000 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" @@ -26,12 +28,16 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_PAD_TO=0x8000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_XIP_SUPPORT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000 CONFIG_SPL_DM_RESET=y CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set CONFIG_CMD_MMC=y diff --git a/configs/stm32f769-disco_defconfig b/configs/stm32f769-disco_defconfig index 89fac36e707..e627934d025 100644 --- a/configs/stm32f769-disco_defconfig +++ b/configs/stm32f769-disco_defconfig @@ -10,6 +10,8 @@ CONFIG_STM32F7=y CONFIG_TARGET_STM32F746_DISCO=y CONFIG_SYS_LOAD_ADDR=0x8008000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20050000 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" @@ -17,7 +19,9 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_PAD_TO=0x8000 CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set CONFIG_CMD_MMC=y diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig index 92c8490a840..a5dc89c8027 100644 --- a/configs/stm32f769-disco_spl_defconfig +++ b/configs/stm32f769-disco_spl_defconfig @@ -18,6 +18,8 @@ CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x8008000 CONFIG_BUILD_TARGET="u-boot-with-spl.bin" CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20050000 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" @@ -25,12 +27,16 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" # CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_PAD_TO=0x8000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_XIP_SUPPORT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000 CONFIG_SPL_DM_RESET=y CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_GPT=y # CONFIG_RANDOM_UUID is not set CONFIG_CMD_MMC=y diff --git a/configs/stm32h743-disco_defconfig b/configs/stm32h743-disco_defconfig index 43e92287592..2b1d1b4e26c 100644 --- a/configs/stm32h743-disco_defconfig +++ b/configs/stm32h743-disco_defconfig @@ -10,6 +10,8 @@ CONFIG_STM32H7=y CONFIG_TARGET_STM32H743_DISCO=y CONFIG_SYS_LOAD_ADDR=0xd0400000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x24040000 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" @@ -17,6 +19,8 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_DEFAULT_FDT_FILE="stm32h743i-disco" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/stm32h743-eval_defconfig b/configs/stm32h743-eval_defconfig index d7c1c79bb35..eb848dab6d5 100644 --- a/configs/stm32h743-eval_defconfig +++ b/configs/stm32h743-eval_defconfig @@ -10,6 +10,8 @@ CONFIG_STM32H7=y CONFIG_TARGET_STM32H743_EVAL=y CONFIG_SYS_LOAD_ADDR=0xd0400000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x24040000 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" @@ -17,6 +19,8 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_DEFAULT_FDT_FILE="stm32h743i-eval" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/stm32h750-art-pi_defconfig b/configs/stm32h750-art-pi_defconfig index 7a2709d52fb..8ba91d34360 100644 --- a/configs/stm32h750-art-pi_defconfig +++ b/configs/stm32h750-art-pi_defconfig @@ -10,6 +10,8 @@ CONFIG_STM32H7=y CONFIG_TARGET_STM32H750_ART_PI=y CONFIG_SYS_LOAD_ADDR=0xc1800000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x24040000 CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y @@ -23,6 +25,8 @@ CONFIG_DEFAULT_FDT_FILE="stm32h750i-art-pi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y CONFIG_SYS_PROMPT="U-Boot > " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig index 7bf24cf0178..9441b8c3b1c 100644 --- a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig +++ b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig @@ -13,14 +13,25 @@ CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_SYS_MEMTEST_START=0xc0000000 CONFIG_SYS_MEMTEST_END=0xc4000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000 CONFIG_FIT=y CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3db00 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x30000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y CONFIG_CMD_MEMINFO=y diff --git a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig index a2f4b7e6d97..96162854523 100644 --- a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig +++ b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig @@ -13,14 +13,25 @@ CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_SYS_MEMTEST_START=0xc0000000 CONFIG_SYS_MEMTEST_END=0xc4000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000 CONFIG_FIT=y CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3db00 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x30000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y CONFIG_CMD_MEMINFO=y diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig index 65bb1c67555..354a43cf55e 100644 --- a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig +++ b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig @@ -13,14 +13,25 @@ CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_SYS_MEMTEST_START=0xc0000000 CONFIG_SYS_MEMTEST_END=0xc4000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000 CONFIG_FIT=y CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3db00 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x30000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y CONFIG_CMD_MEMINFO=y diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig index 39f7d9643b1..a601477d127 100644 --- a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig +++ b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig @@ -13,14 +13,25 @@ CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_SYS_MEMTEST_START=0xc0000000 CONFIG_SYS_MEMTEST_END=0xc4000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000 CONFIG_FIT=y CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3db00 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x30000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y CONFIG_CMD_MEMINFO=y diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 1b1c255b981..662754128da 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -20,11 +20,21 @@ CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_SYS_MEMTEST_START=0xc0000000 CONFIG_SYS_MEMTEST_END=0xc4000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000 CONFIG_FIT=y CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" CONFIG_SPL_LOG=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3db00 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x30000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y @@ -36,6 +46,7 @@ CONFIG_SPL_SPI_FLASH_MTD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y CONFIG_CMD_NVEDIT_EFI=y diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig index 02b37e14eae..a6398c75278 100644 --- a/configs/stm32mp15_defconfig +++ b/configs/stm32mp15_defconfig @@ -16,11 +16,13 @@ CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_SYS_MEMTEST_START=0xc0000000 CONFIG_SYS_MEMTEST_END=0xc4000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000 CONFIG_FIT=y CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y CONFIG_CMD_NVEDIT_EFI=y diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index ca3873c7e6c..72d2f6e9a7c 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -16,6 +16,8 @@ CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_SYS_MEMTEST_START=0xc0000000 CONFIG_SYS_MEMTEST_END=0xc4000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0xc1000000 @@ -25,7 +27,15 @@ CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" CONFIG_CONSOLE_MUX=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3db00 CONFIG_SPL_LEGACY_IMAGE_FORMAT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x30000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y @@ -39,7 +49,9 @@ CONFIG_SPL_SPI_FLASH_MTD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y +CONFIG_SPL_TARGET="u-boot.itb" CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_SYS_PBSIZE=1050 # CONFIG_CMD_ELF is not set # CONFIG_CMD_EXPORTENV is not set CONFIG_CMD_EEPROM=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 4e70566e3f1..b16ad4fca2a 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -14,6 +14,8 @@ CONFIG_SPL_SPI=y # CONFIG_ARMV7_VIRT is not set CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0xc1000000 @@ -23,7 +25,15 @@ CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" CONFIG_CONSOLE_MUX=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x3db00 CONFIG_SPL_LEGACY_IMAGE_FORMAT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x30000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y @@ -37,7 +47,9 @@ CONFIG_SPL_SPI_FLASH_MTD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 CONFIG_SPL_USB_GADGET=y CONFIG_SPL_DFU=y +CONFIG_SPL_TARGET="u-boot.itb" CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_SYS_PBSIZE=1050 # CONFIG_CMD_ELF is not set # CONFIG_CMD_EXPORTENV is not set CONFIG_CMD_EEPROM=y diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index df31c0fbb10..626398b9e86 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -17,11 +17,13 @@ CONFIG_SYS_LOAD_ADDR=0xc2000000 CONFIG_SYS_MEMTEST_START=0xc0000000 CONFIG_SYS_MEMTEST_END=0xc4000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc0100000 CONFIG_FIT=y CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" CONFIG_FDT_SIMPLEFB=y CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_ADTIMG=y CONFIG_CMD_ERASEENV=y CONFIG_CMD_NVEDIT_EFI=y diff --git a/configs/stmark2_defconfig b/configs/stmark2_defconfig index 75369d2a0e1..dfec23e7518 100644 --- a/configs/stmark2_defconfig +++ b/configs/stmark2_defconfig @@ -8,6 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="stmark2" CONFIG_SYS_LOAD_ADDR=0x40010000 CONFIG_TARGET_STMARK2=y CONFIG_MCFTMR=y +CONFIG_SYS_BARGSIZE=256 CONFIG_TIMESTAMP=y CONFIG_SYS_MONITOR_BASE=0x47E00400 CONFIG_USE_BOOTARGS=y @@ -15,9 +16,11 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 rw rootfstype=ramfs rdinit= CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe 0:1 50000000; sf read ${loadaddr} 0x100000 ${kern_size}; bootm ${loadaddr}" # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set CONFIG_SYS_PROMPT="stmark2 $ " +CONFIG_SYS_PBSIZE=283 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_EXPORTENV is not set diff --git a/configs/stout_defconfig b/configs/stout_defconfig index 35c99aaed37..4f0cda9c897 100644 --- a/configs/stout_defconfig +++ b/configs/stout_defconfig @@ -26,16 +26,24 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x50000000 CONFIG_ENV_ADDR=0xC0000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4f000000 CONFIG_FIT=y CONFIG_BOOTDELAY=3 +CONFIG_SPL_MAX_SIZE=0x4000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xe6340000 CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x140000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=256 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig index 27d1f40f3c1..d03d984871a 100644 --- a/configs/stv0991_defconfig +++ b/configs/stv0991_defconfig @@ -23,6 +23,7 @@ CONFIG_BOOTCOMMAND="go 0x40040000" CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="STV0991> " +CONFIG_SYS_PBSIZE=1050 CONFIG_CMD_MEMTEST=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/sun8i_a23_evb_defconfig b/configs/sun8i_a23_evb_defconfig index a3b1d76d8bb..59315cdb05d 100644 --- a/configs/sun8i_a23_evb_defconfig +++ b/configs/sun8i_a23_evb_defconfig @@ -9,6 +9,8 @@ CONFIG_USB0_VBUS_PIN="axp_drivebus" CONFIG_USB0_VBUS_DET="axp_vbus_detect" CONFIG_USB1_VBUS_PIN="PH7" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_CONS_INDEX=5 CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig index 3fee7c2e50c..b77c4e7a3cb 100644 --- a/configs/sunxi_Gemei_G9_defconfig +++ b/configs/sunxi_Gemei_G9_defconfig @@ -11,7 +11,9 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 CONFIG_SPL_I2C=y +CONFIG_SYS_PBSIZE=1024 CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 diff --git a/configs/synquacer_developerbox_defconfig b/configs/synquacer_developerbox_defconfig index add6041e270..5e4accf4b12 100644 --- a/configs/synquacer_developerbox_defconfig +++ b/configs/synquacer_developerbox_defconfig @@ -11,9 +11,12 @@ CONFIG_DEFAULT_DEVICE_TREE="synquacer-sc2a11-developerbox" CONFIG_SYS_LOAD_ADDR=0x80000000 CONFIG_TARGET_DEVELOPERBOX=y CONFIG_AHCI=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xe0000000 CONFIG_FIT=y CONFIG_BOOTSTAGE_STASH_SIZE=4096 CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=128 CONFIG_CMD_IMLS=y CONFIG_CMD_ERASEENV=y CONFIG_CMD_NVEDIT_EFI=y diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig index 9d2edd2eceb..31a550031da 100644 --- a/configs/syzygy_hub_defconfig +++ b/configs/syzygy_hub_defconfig @@ -25,10 +25,20 @@ CONFIG_FIT_VERBOSE=y CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_USE_PREBOOT=y CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x30000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffe00 CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 +CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb" CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_FALCON_BOOT_MMCSD=y -CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x0 +CONFIG_SYS_SPL_ARGS_ADDR=0x10000000 +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=2071 CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y CONFIG_CMD_FPGA_LOADMK=y diff --git a/configs/tanix_tx6_defconfig b/configs/tanix_tx6_defconfig index 0390347415c..d1f12fba9bb 100644 --- a/configs/tanix_tx6_defconfig +++ b/configs/tanix_tx6_defconfig @@ -8,3 +8,5 @@ CONFIG_DRAM_CLK=648 CONFIG_MMC0_CD_PIN="PF6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x118000 +CONFIG_SYS_PBSIZE=1024 diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index e6bef6c974e..c0a4dcc271d 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -39,16 +39,31 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x3e00 +CONFIG_SPL_PAD_TO=0x20000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x3e00 +CONFIG_SPL_BSS_MAX_SIZE=0x600 # CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x304000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20ba0000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x460000 CONFIG_SPL_CRC32=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y +CONFIG_SPL_NAND_SOFTECC=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_SYS_XTRACE is not set # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y diff --git a/configs/tb100_defconfig b/configs/tb100_defconfig index 7b843a71f09..575bf2dae28 100644 --- a/configs/tb100_defconfig +++ b/configs/tb100_defconfig @@ -7,10 +7,14 @@ CONFIG_ENV_SIZE=0x800 CONFIG_DEFAULT_DEVICE_TREE="abilis_tb100" CONFIG_SYS_CLK_FREQ=500000000 CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f30 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_SYS_PROMPT="[tb100]:~# " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=284 # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 9f7642f25ca..1519f7dbce5 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -28,6 +28,8 @@ CONFIG_DEFAULT_FDT_FILE="imx6q-tbs2910.dtb" CONFIG_PRE_CONSOLE_BUFFER=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Matrix U-Boot> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=544 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_BOOTM_PLAN9 is not set diff --git a/configs/tbs_a711_defconfig b/configs/tbs_a711_defconfig index b3c2e69d6cd..3dd9252a742 100644 --- a/configs/tbs_a711_defconfig +++ b/configs/tbs_a711_defconfig @@ -13,6 +13,8 @@ CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" CONFIG_USB0_ID_DET="PH11" CONFIG_AXP_GPIO=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_AXP_DCDC5_VOLT=1200 CONFIG_USB_EHCI_HCD=y diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index ea568d4bf70..191b2c08509 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -14,7 +14,17 @@ CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x800ffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra30 (TEC-NG) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2084 # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/tec_defconfig b/configs/tec_defconfig index ec6ecbce6fb..9fed0eaed13 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -13,7 +13,17 @@ CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (TEC) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2081 # CONFIG_CMD_IMI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/ten64_tfa_defconfig b/configs/ten64_tfa_defconfig index 96bca8344df..4bbee30b064 100644 --- a/configs/ten64_tfa_defconfig +++ b/configs/ten64_tfa_defconfig @@ -27,6 +27,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_ID_EEPROM is not set CONFIG_PCI_INIT_R=y CONFIG_RESET_PHY_R=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_BOOTMENU=y CONFIG_CMD_GREPENV=y diff --git a/configs/teres_i_defconfig b/configs/teres_i_defconfig index e7de85eb506..cd6d825715e 100644 --- a/configs/teres_i_defconfig +++ b/configs/teres_i_defconfig @@ -9,6 +9,8 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PL7" CONFIG_I2C0_ENABLE=y CONFIG_PREBOOT="setenv usb_pgood_delay 2000; usb start" +CONFIG_SPL_STACK=0x54000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_DM_REGULATOR_FIXED=y diff --git a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig index 25758b434f5..daaefba3642 100644 --- a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig +++ b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig @@ -27,6 +27,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/theadorable-x86-conga-qa3-e3845_defconfig b/configs/theadorable-x86-conga-qa3-e3845_defconfig index 73241aeed09..a62ce3e0a5c 100644 --- a/configs/theadorable-x86-conga-qa3-e3845_defconfig +++ b/configs/theadorable-x86-conga-qa3-e3845_defconfig @@ -26,6 +26,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/theadorable-x86-dfi-bt700_defconfig b/configs/theadorable-x86-dfi-bt700_defconfig index 9dd2d4f387d..a54f34a6cf7 100644 --- a/configs/theadorable-x86-dfi-bt700_defconfig +++ b/configs/theadorable-x86-dfi-bt700_defconfig @@ -25,6 +25,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_LAST_STAGE_INIT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_CPU=y CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/theadorable_debug_defconfig b/configs/theadorable_debug_defconfig index 9e8523d9414..a3d6313f020 100644 --- a/configs/theadorable_debug_defconfig +++ b/configs/theadorable_debug_defconfig @@ -19,6 +19,8 @@ CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_SYS_MEM_TOP_HIDE=0x80000 CONFIG_SYS_LOAD_ADDR=0x800000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y CONFIG_BOOTDELAY=3 @@ -27,8 +29,16 @@ CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_MAX_SIZE=0x1bfd0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x40020000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4002c000 CONFIG_SPL_I2C=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index 8cf0100aef7..0a6b0e88b3f 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -23,6 +23,8 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00 CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" @@ -34,6 +36,10 @@ CONFIG_USE_PREBOOT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y +CONFIG_SPL_BSS_START_ADDR=0x80000000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y @@ -46,6 +52,8 @@ CONFIG_SPL_YMODEM_SUPPORT=y # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_ASKENV=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/thunderx_88xx_defconfig b/configs/thunderx_88xx_defconfig index 5e818864d2c..03b6201591f 100644 --- a/configs/thunderx_88xx_defconfig +++ b/configs/thunderx_88xx_defconfig @@ -12,6 +12,8 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" for Cavium Thunder CN88XX ARM v8 Multi-Core" CONFIG_SYS_LOAD_ADDR=0x500000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x57fff0 CONFIG_REMAKE_ELF=y CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y @@ -21,6 +23,9 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200n8 earlycon=pl011,0x87e024000000 debug ma CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="ThunderX_88XX> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=544 # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set # CONFIG_CMD_EDITENV is not set diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig index d328ea12226..54c1d80e510 100644 --- a/configs/ti816x_evm_defconfig +++ b/configs/ti816x_evm_defconfig @@ -20,6 +20,8 @@ CONFIG_SYS_CLK_FREQ=27000000 CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4031ff00 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyO2,115200n8 noinitrd earlyprintk" @@ -27,12 +29,16 @@ CONFIG_BOOTCOMMAND="mmc rescan;fatload mmc 0 ${loadaddr} uImage;bootm ${loadaddr CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_MISC_INIT_R is not set +CONFIG_SPL_MAX_SIZE=0xfff1b400 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_BASE=y +CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig index 5c2366098b7..ce12b79ac47 100644 --- a/configs/tinker-rk3288_defconfig +++ b/configs/tinker-rk3288_defconfig @@ -16,11 +16,17 @@ CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_SPL_I2C=y diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig index 4b6ae64988a..8dede27efcc 100644 --- a/configs/tinker-s-rk3288_defconfig +++ b/configs/tinker-s-rk3288_defconfig @@ -11,16 +11,22 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s" CONFIG_ROCKCHIP_RK3288=y CONFIG_TARGET_TINKER_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x800000 -CONFIG_SPL_SIZE_LIMIT=0x4B000 +CONFIG_SPL_SIZE_LIMIT=0x4b000 CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000 CONFIG_SPL_I2C=y diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig index eecc3dcb935..a11a17905cb 100644 --- a/configs/topic_miami_defconfig +++ b/configs/topic_miami_defconfig @@ -25,10 +25,20 @@ CONFIG_BOOTDELAY=0 CONFIG_BOOTCOMMAND="if mmcinfo; then if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; fi; fi; run $modeboot" CONFIG_USE_PREBOOT=y CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x30000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffe00 CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 CONFIG_SYS_PROMPT="zynq-uboot> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=2077 CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig index 7188a03edcb..f962f37d7eb 100644 --- a/configs/topic_miamilite_defconfig +++ b/configs/topic_miamilite_defconfig @@ -25,10 +25,20 @@ CONFIG_BOOTDELAY=0 CONFIG_BOOTCOMMAND="if mmcinfo; then if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; fi; fi; run $modeboot" CONFIG_USE_PREBOOT=y CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x30000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffe00 CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 CONFIG_SYS_PROMPT="zynq-uboot> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=2077 CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig index 83f38effd5f..dc71856f720 100644 --- a/configs/topic_miamiplus_defconfig +++ b/configs/topic_miamiplus_defconfig @@ -25,10 +25,20 @@ CONFIG_BOOTDELAY=0 CONFIG_BOOTCOMMAND="if mmcinfo; then if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; fi; fi; run $modeboot" CONFIG_USE_PREBOOT=y CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x30000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffe00 CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 CONFIG_SYS_PROMPT="zynq-uboot> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=2077 CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y diff --git a/configs/total_compute_defconfig b/configs/total_compute_defconfig index 826afaa66cb..2cb17f5040b 100644 --- a/configs/total_compute_defconfig +++ b/configs/total_compute_defconfig @@ -9,6 +9,8 @@ CONFIG_SYS_LOAD_ADDR=0x90000000 CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0xff000000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007fff0 CONFIG_REMAKE_ELF=y CONFIG_ANDROID_BOOT_IMAGE=y CONFIG_FIT=y @@ -22,6 +24,9 @@ CONFIG_AVB_VERIFY=y CONFIG_AVB_BUF_ADDR=0x90000000 CONFIG_AVB_BUF_SIZE=0x10000000 CONFIG_SYS_PROMPT="TOTAL_COMPUTE# " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=544 # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set @@ -46,6 +51,7 @@ CONFIG_ARM_PL180_MMCI=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_32BIT=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/tplink_wdr4300_defconfig b/configs/tplink_wdr4300_defconfig index c8f97be7eba..40dc2c158ef 100644 --- a/configs/tplink_wdr4300_defconfig +++ b/configs/tplink_wdr4300_defconfig @@ -8,6 +8,8 @@ CONFIG_ARCH_ATH79=y CONFIG_BOARD_TPLINK_WDR4300=y CONFIG_SYS_MEMTEST_START=0x80100000 CONFIG_SYS_MEMTEST_END=0x83f00000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xbd007fff CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" @@ -15,7 +17,9 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="dhcp 192.168.1.1:wdr4300.fit && bootm $loadaddr" CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_ELF is not set # CONFIG_CMD_XIMG is not set CONFIG_CMD_MEMTEST=y diff --git a/configs/tqma6dl_mba6_mmc_defconfig b/configs/tqma6dl_mba6_mmc_defconfig index 81c30c6fc67..a02ee927852 100644 --- a/configs/tqma6dl_mba6_mmc_defconfig +++ b/configs/tqma6dl_mba6_mmc_defconfig @@ -16,6 +16,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run mmcboot; run netboot; run panicboot" CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb" CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/tqma6dl_mba6_spi_defconfig b/configs/tqma6dl_mba6_spi_defconfig index 25f231cc1de..8f7e0ac1019 100644 --- a/configs/tqma6dl_mba6_spi_defconfig +++ b/configs/tqma6dl_mba6_spi_defconfig @@ -19,6 +19,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe; run mmcboot; run netboot; run panicboot" CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb" CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/tqma6q_mba6_mmc_defconfig b/configs/tqma6q_mba6_mmc_defconfig index b838858c415..48822f388c8 100644 --- a/configs/tqma6q_mba6_mmc_defconfig +++ b/configs/tqma6q_mba6_mmc_defconfig @@ -16,6 +16,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run mmcboot; run netboot; run panicboot" CONFIG_DEFAULT_FDT_FILE="imx6q-mba6x.dtb" CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/tqma6q_mba6_spi_defconfig b/configs/tqma6q_mba6_spi_defconfig index a3bca139412..ed774262aec 100644 --- a/configs/tqma6q_mba6_spi_defconfig +++ b/configs/tqma6q_mba6_spi_defconfig @@ -19,6 +19,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe; run mmcboot; run netboot; run panicboot" CONFIG_DEFAULT_FDT_FILE="imx6q-mba6x.dtb" CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/tqma6s_mba6_mmc_defconfig b/configs/tqma6s_mba6_mmc_defconfig index b41ace3d41d..9400c648121 100644 --- a/configs/tqma6s_mba6_mmc_defconfig +++ b/configs/tqma6s_mba6_mmc_defconfig @@ -16,6 +16,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run mmcboot; run netboot; run panicboot" CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb" CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/tqma6s_mba6_spi_defconfig b/configs/tqma6s_mba6_spi_defconfig index b9a3facdb1b..ddbf9a757e6 100644 --- a/configs/tqma6s_mba6_spi_defconfig +++ b/configs/tqma6s_mba6_spi_defconfig @@ -19,6 +19,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="sf probe; run mmcboot; run netboot; run panicboot" CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb" CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_EEPROM=y CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 diff --git a/configs/trats2_defconfig b/configs/trats2_defconfig index 6c43a02cb0c..00a663fcf2a 100644 --- a/configs/trats2_defconfig +++ b/configs/trats2_defconfig @@ -14,6 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos4412-trats2" CONFIG_SYS_MEM_TOP_HIDE=0x100000 CONFIG_SYS_LOAD_ADDR=0x43e00000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x43dfff10 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -24,6 +26,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_MISC_INIT_R=y CONFIG_SYS_PROMPT="Trats2 # " +CONFIG_SYS_PBSIZE=1024 # CONFIG_CMD_XIMG is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y diff --git a/configs/trats_defconfig b/configs/trats_defconfig index 5990dc12263..d5f08666068 100644 --- a/configs/trats_defconfig +++ b/configs/trats_defconfig @@ -14,6 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos4210-trats" CONFIG_SYS_MEM_TOP_HIDE=0x100000 CONFIG_SYS_LOAD_ADDR=0x44800000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x447fff10 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_USE_BOOTARGS=y @@ -23,6 +25,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_MISC_INIT_R=y CONFIG_SYS_PROMPT="Trats # " +CONFIG_SYS_PBSIZE=1024 # CONFIG_CMD_XIMG is not set CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index b28349dc1c8..134605d8793 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -14,7 +14,17 @@ CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (TrimSlice) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2087 # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig index 11f8b5b1051..3c2a7a34d1c 100644 --- a/configs/tuge1_defconfig +++ b/configs/tuge1_defconfig @@ -131,6 +131,9 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/configs/turris_mox_defconfig b/configs/turris_mox_defconfig index c1bd1de4a91..1df47fe3c9c 100644 --- a/configs/turris_mox_defconfig +++ b/configs/turris_mox_defconfig @@ -16,6 +16,8 @@ CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_OF_BOARD_FIXUP=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -28,6 +30,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_SHA1SUM=y CONFIG_CMD_CLK=y # CONFIG_CMD_FLASH is not set diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig index da94ca74ac9..4085fac2329 100644 --- a/configs/turris_omnia_defconfig +++ b/configs/turris_omnia_defconfig @@ -27,6 +27,8 @@ CONFIG_OF_BOARD_FIXUP=y CONFIG_SYS_MEMTEST_START=0x00800000 CONFIG_SYS_MEMTEST_END=0x00ffffff CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -36,9 +38,16 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x22fd0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x40023000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4002c000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y +CONFIG_SYS_MAXARGS=32 CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y CONFIG_CMD_SHA1SUM=y diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig index c2536640621..8f273da2f1f 100644 --- a/configs/tuxx1_defconfig +++ b/configs/tuxx1_defconfig @@ -153,6 +153,9 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_LAST_STAGE_INIT=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_IMLS=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/configs/u200_defconfig b/configs/u200_defconfig index 609f282c65a..0260a3823fa 100644 --- a/configs/u200_defconfig +++ b/configs/u200_defconfig @@ -11,10 +11,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" u200" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig index f7cd1a0589b..613a81b9b77 100644 --- a/configs/uDPU_defconfig +++ b/configs/uDPU_defconfig @@ -14,6 +14,8 @@ CONFIG_SYS_LOAD_ADDR=0x6000000 CONFIG_DEBUG_UART=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -24,6 +26,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_ARCH_EARLY_INIT_R=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="uDPU>> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=1048 # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig index ab2b2ee6755..e5bacb1bb8e 100644 --- a/configs/udoo_defconfig +++ b/configs/udoo_defconfig @@ -22,9 +22,13 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y # CONFIG_CMD_PINMUX is not set diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig index 2daf5f81bbf..e5ba2f3d090 100644 --- a/configs/udoo_neo_defconfig +++ b/configs/udoo_neo_defconfig @@ -22,9 +22,13 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y # CONFIG_CMD_PINMUX is not set diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig index 03e4f1fb036..72306ab25eb 100644 --- a/configs/uniphier_ld4_sld8_defconfig +++ b/configs/uniphier_ld4_sld8_defconfig @@ -10,14 +10,22 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_LOAD_ADDR=0x85000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x84000000 CONFIG_TIMESTAMP=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot" CONFIG_LOGLEVEL=6 +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_PAD_TO=0x20000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x100000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_CMD_CONFIG=y # CONFIG_CMD_XIMG is not set CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 diff --git a/configs/uniphier_v7_defconfig b/configs/uniphier_v7_defconfig index b69b2b26570..a448d1cb4be 100644 --- a/configs/uniphier_v7_defconfig +++ b/configs/uniphier_v7_defconfig @@ -10,14 +10,22 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_MICRO_SUPPORT_CARD=y CONFIG_SYS_LOAD_ADDR=0x85000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x84000000 CONFIG_TIMESTAMP=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot" CONFIG_LOGLEVEL=6 +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_PAD_TO=0x20000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x100000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y +CONFIG_SPL_TARGET="u-boot-with-spl.bin" CONFIG_CMD_CONFIG=y # CONFIG_CMD_XIMG is not set CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig index db986cf13b8..c0cdc121f0a 100644 --- a/configs/uniphier_v8_defconfig +++ b/configs/uniphier_v8_defconfig @@ -15,6 +15,8 @@ CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot" CONFIG_LOGLEVEL=6 +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_PAD_TO=0x20000 CONFIG_CMD_CONFIG=y # CONFIG_CMD_XIMG is not set CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 diff --git a/configs/usb_a9263_dataflash_defconfig b/configs/usb_a9263_dataflash_defconfig index 65f6a5e9714..b6846503ef4 100644 --- a/configs/usb_a9263_dataflash_defconfig +++ b/configs/usb_a9263_dataflash_defconfig @@ -20,6 +20,8 @@ CONFIG_BOOTCOMMAND="nboot 21000000 0" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_LOADB is not set diff --git a/configs/usbarmory_defconfig b/configs/usbarmory_defconfig index 6141a5cfd01..c01ca017064 100644 --- a/configs/usbarmory_defconfig +++ b/configs/usbarmory_defconfig @@ -16,6 +16,7 @@ CONFIG_SYS_MEMTEST_START=0x70000000 CONFIG_SYS_MEMTEST_END=0x90000000 CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTCOMMAND="run distro_bootcmd; setenv bootargs console=${console} ${bootargs_default}; ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; bootz ${kernel_addr_r} - ${fdt_addr_r}" +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_MEMTEST=y CONFIG_CMD_FUSE=y CONFIG_CMD_I2C=y diff --git a/configs/variscite_dart6ul_defconfig b/configs/variscite_dart6ul_defconfig index 187402a61bd..f19dcbddcdf 100644 --- a/configs/variscite_dart6ul_defconfig +++ b/configs/variscite_dart6ul_defconfig @@ -18,8 +18,11 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run mmc_mmc_fit" +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index aa47fbca5ba..25ee96a1ddf 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -14,7 +14,17 @@ CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x800ffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra124 (Venice2) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2086 # CONFIG_CMD_IMI is not set CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index 1c8857e44cb..87e4d10b292 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -12,7 +12,17 @@ CONFIG_TARGET_VENTANA=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_USE_PREBOOT=y +CONFIG_SPL_FOOTPRINT_LIMIT=y +CONFIG_SPL_MAX_FOOTPRINT=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (Ventana) # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2085 # CONFIG_CMD_IMI is not set CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig index 46d4dd72106..34afdc57911 100644 --- a/configs/verdin-imx8mm_defconfig +++ b/configs/verdin-imx8mm_defconfig @@ -32,13 +32,26 @@ CONFIG_LOG=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x25000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x910000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x920000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="Verdin iMX8MM # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2081 # CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_EXPORTENV is not set diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig index 4b7cf74f6cd..52d281e8318 100644 --- a/configs/verdin-imx8mp_defconfig +++ b/configs/verdin-imx8mp_defconfig @@ -40,15 +40,28 @@ CONFIG_LOG=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x26000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x98fc00 +CONFIG_SPL_BSS_MAX_SIZE=0x400 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x960000 +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_PROMPT="Verdin iMX8MP # " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2081 # CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_EXPORTENV is not set diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig index 967bc560936..ba8883dced5 100644 --- a/configs/vexpress_aemv8a_juno_defconfig +++ b/configs/vexpress_aemv8a_juno_defconfig @@ -7,6 +7,8 @@ CONFIG_IDENT_STRING=" vexpress_aemv8a" CONFIG_TARGET_VEXPRESS64_JUNO=y CONFIG_SYS_MEMTEST_START=0x80000000 CONFIG_SYS_MEMTEST_END=0xff000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007fff0 CONFIG_REMAKE_ELF=y CONFIG_BOOTDELAY=1 CONFIG_USE_BOOTARGS=y @@ -14,6 +16,9 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200n8 root=/dev/sda2 rw rootwait earlycon=pl # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="VExpress64# " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=541 CONFIG_CMD_MEMTEST=y CONFIG_CMD_ARMFLASH=y CONFIG_CMD_PCI=y @@ -23,6 +28,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD=y +CONFIG_SYS_FLASH_CFI_WIDTH_32BIT=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig index 1a4cbc1cdd0..0ae8ae10a31 100644 --- a/configs/vexpress_aemv8a_semi_defconfig +++ b/configs/vexpress_aemv8a_semi_defconfig @@ -14,6 +14,9 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0 earlycon=pl011,0x1c090000 debug user_debug=31 loglevel=9" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="VExpress64# " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=541 CONFIG_CMD_ABOOTIMG=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_ARMFLASH=y @@ -22,6 +25,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD=y +CONFIG_SYS_FLASH_CFI_WIDTH_32BIT=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/vexpress_aemv8r_defconfig b/configs/vexpress_aemv8r_defconfig index a1c5d887170..2cc28d6c6a3 100644 --- a/configs/vexpress_aemv8r_defconfig +++ b/configs/vexpress_aemv8r_defconfig @@ -11,5 +11,8 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyAMA0 earlycon=pl011,0x9c090000 rootfstype=ext4 root=/dev/vda2 rw rootwait" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="VExpress64# " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=541 # CONFIG_MMC is not set CONFIG_VIRTIO_MMIO=y diff --git a/configs/vexpress_ca9x4_defconfig b/configs/vexpress_ca9x4_defconfig index e221e8207e4..f2084890ede 100644 --- a/configs/vexpress_ca9x4_defconfig +++ b/configs/vexpress_ca9x4_defconfig @@ -11,11 +11,15 @@ CONFIG_DEFAULT_DEVICE_TREE="vexpress-v2p-ca9" CONFIG_SYS_LOAD_ADDR=0x90000000 CONFIG_ENV_ADDR=0x47F80000 CONFIG_DISTRO_DEFAULTS=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x60000f10 CONFIG_SYS_MONITOR_BASE=0x40000000 CONFIG_BOOTCOMMAND="run distro_bootcmd; run bootflash" CONFIG_DEFAULT_FDT_FILE="vexpress-v2p-ca9.dtb" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_XIMG is not set diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig index b3c66dfc618..0a3374cd545 100644 --- a/configs/vf610twr_defconfig +++ b/configs/vf610twr_defconfig @@ -25,6 +25,8 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_FUSE=y diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig index 9cbd62e3c8d..f6ed47f7348 100644 --- a/configs/vf610twr_nand_defconfig +++ b/configs/vf610twr_nand_defconfig @@ -25,6 +25,8 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_FUSE=y diff --git a/configs/vinco_defconfig b/configs/vinco_defconfig index e1e1f953826..390712a8df6 100644 --- a/configs/vinco_defconfig +++ b/configs/vinco_defconfig @@ -12,6 +12,8 @@ CONFIG_ENV_SECT_SIZE=0x1000 CONFIG_DEFAULT_DEVICE_TREE="at91-vinco" CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000f00 CONFIG_SPI_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y @@ -22,6 +24,8 @@ CONFIG_BOOTCOMMAND="mmc dev 0 0;mmc read ${loadaddr} ${k_offset} ${k_blksize};mm CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="vinco => " +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=282 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set CONFIG_CMD_GPT=y diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig index 57fd3376bbc..3b9aa979090 100644 --- a/configs/vining_2000_defconfig +++ b/configs/vining_2000_defconfig @@ -31,13 +31,17 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_USB_HOST=y CONFIG_SPL_USB_GADGET=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y diff --git a/configs/vocore2_defconfig b/configs/vocore2_defconfig index 86765545744..b362d549a21 100644 --- a/configs/vocore2_defconfig +++ b/configs/vocore2_defconfig @@ -30,9 +30,16 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_LOGLEVEL=8 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y +CONFIG_SPL_MAX_SIZE=0x10000 +CONFIG_SPL_BSS_START_ADDR=0x80010000 +CONFIG_SPL_BSS_MAX_SIZE=0x10000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_LICENSE=y # CONFIG_BOOTM_NETBSD is not set # CONFIG_BOOTM_PLAN9 is not set diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig index ecba1a76c38..cbaf970e6ad 100644 --- a/configs/vyasa-rk3288_defconfig +++ b/configs/vyasa-rk3288_defconfig @@ -16,15 +16,24 @@ CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000 CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-vyasa.dtb" CONFIG_SILENT_CONSOLE=y CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_PAD_TO=0x7f8000 +CONFIG_SPL_NO_BSS_LIMIT=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xff718000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0xffe5000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x8800 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x8000 +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x10 CONFIG_CMD_SPL=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index 569b5873ffc..595176190a7 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -33,10 +33,14 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_SPL_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_FS_EXT4=y +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y diff --git a/configs/warp7_bl33_defconfig b/configs/warp7_bl33_defconfig index 100f1c93627..a50a1c8bc77 100644 --- a/configs/warp7_bl33_defconfig +++ b/configs/warp7_bl33_defconfig @@ -19,6 +19,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then run do_bootscript_hab;if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi" # CONFIG_BOARD_EARLY_INIT_F is not set CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig index b72332c778a..40f9e502e92 100644 --- a/configs/warp7_defconfig +++ b/configs/warp7_defconfig @@ -23,6 +23,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then run do_bootscript_hab;if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi" # CONFIG_BOARD_EARLY_INIT_F is not set CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set diff --git a/configs/warp_defconfig b/configs/warp_defconfig index a3bc5b68528..4c9f7051fef 100644 --- a/configs/warp_defconfig +++ b/configs/warp_defconfig @@ -16,6 +16,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTZ=y CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y diff --git a/configs/wetek-core2_defconfig b/configs/wetek-core2_defconfig index 07268c14a04..c8fe005e604 100644 --- a/configs/wetek-core2_defconfig +++ b/configs/wetek-core2_defconfig @@ -11,10 +11,13 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" wetek-core2" CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 CONFIG_REMAKE_ELF=y CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set CONFIG_CMD_ADC=y diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig index 4c5008fedef..7eb23907ebc 100644 --- a/configs/work_92105_defconfig +++ b/configs/work_92105_defconfig @@ -20,14 +20,20 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x120000 CONFIG_SYS_LOAD_ADDR=0x80008000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007ff20 CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS2,115200n8" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_PAD_TO=0x20000 +CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfff8 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_BASE=y diff --git a/configs/x530_defconfig b/configs/x530_defconfig index 860cb220713..c52c9bdb066 100644 --- a/configs/x530_defconfig +++ b/configs/x530_defconfig @@ -19,6 +19,8 @@ CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_ENV_ADDR=0x100000 CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_SILENT_CONSOLE=y @@ -26,8 +28,17 @@ CONFIG_SILENT_U_BOOT_ONLY=y CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_MAX_SIZE=0x22fd0 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x40023000 +CONFIG_SPL_BSS_MAX_SIZE=0x4000 CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0x4002c000 CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=276 CONFIG_CMD_MEMINFO=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/xenguest_arm64_defconfig b/configs/xenguest_arm64_defconfig index 11fca0907de..fec124204b7 100644 --- a/configs/xenguest_arm64_defconfig +++ b/configs/xenguest_arm64_defconfig @@ -11,6 +11,8 @@ CONFIG_SYS_LOAD_ADDR=0x40000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOOTDELAY=10 CONFIG_SYS_PROMPT="xenguest# " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=1051 # CONFIG_CMD_BDI is not set # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_ELF is not set diff --git a/configs/xilinx_versal_mini_defconfig b/configs/xilinx_versal_mini_defconfig index 00d08f49f61..e555c0ccfac 100644 --- a/configs/xilinx_versal_mini_defconfig +++ b/configs/xilinx_versal_mini_defconfig @@ -14,6 +14,8 @@ CONFIG_SYS_MEM_RSVD_FOR_MMU=y CONFIG_SYS_LOAD_ADDR=0x8000000 CONFIG_SYS_MEMTEST_START=0x00000000 CONFIG_SYS_MEMTEST_END=0x00001000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe0000 # CONFIG_EXPERT is not set CONFIG_REMAKE_ELF=y # CONFIG_LEGACY_IMAGE_FORMAT is not set @@ -29,6 +31,9 @@ CONFIG_CLOCKS=y # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set CONFIG_SYS_PROMPT="Versal> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1049 # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_BOOTM is not set diff --git a/configs/xilinx_versal_mini_emmc0_defconfig b/configs/xilinx_versal_mini_emmc0_defconfig index 9d2f97576bb..60d2263c584 100644 --- a/configs/xilinx_versal_mini_emmc0_defconfig +++ b/configs/xilinx_versal_mini_emmc0_defconfig @@ -11,6 +11,8 @@ CONFIG_ENV_SIZE=0x80 CONFIG_DEFAULT_DEVICE_TREE="versal-mini-emmc0" # CONFIG_PSCI_RESET is not set CONFIG_SYS_LOAD_ADDR=0x8000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000 # CONFIG_EXPERT is not set CONFIG_REMAKE_ELF=y # CONFIG_AUTOBOOT is not set @@ -25,6 +27,9 @@ CONFIG_CLOCKS=y # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set CONFIG_SYS_PROMPT="Versal> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1049 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/xilinx_versal_mini_emmc1_defconfig b/configs/xilinx_versal_mini_emmc1_defconfig index 7efb9287561..6bbaf3ce339 100644 --- a/configs/xilinx_versal_mini_emmc1_defconfig +++ b/configs/xilinx_versal_mini_emmc1_defconfig @@ -11,6 +11,8 @@ CONFIG_ENV_SIZE=0x80 CONFIG_DEFAULT_DEVICE_TREE="versal-mini-emmc1" # CONFIG_PSCI_RESET is not set CONFIG_SYS_LOAD_ADDR=0x8000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000 # CONFIG_EXPERT is not set CONFIG_REMAKE_ELF=y # CONFIG_AUTOBOOT is not set @@ -25,6 +27,9 @@ CONFIG_CLOCKS=y # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set CONFIG_SYS_PROMPT="Versal> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1049 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index 38747ffd02c..78a0cc38280 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -22,6 +22,8 @@ CONFIG_USE_PREBOOT=y CONFIG_BOARD_EARLY_INIT_R=y CONFIG_CLOCKS=y CONFIG_SYS_PROMPT="Versal> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2073 CONFIG_CMD_BOOTMENU=y CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_MEMTEST=y diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig index 1f3e6a42a14..92ef35c6475 100644 --- a/configs/xilinx_zynq_virt_defconfig +++ b/configs/xilinx_zynq_virt_defconfig @@ -28,11 +28,24 @@ CONFIG_LEGACY_IMAGE_FORMAT=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_USE_PREBOOT=y CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x30000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x100000 +CONFIG_SPL_BSS_MAX_SIZE=0x100000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffe00 CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 +CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" +CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb" CONFIG_SPL_FPGA=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x10000000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_PBSIZE=2071 # CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_IMLS=y CONFIG_CMD_THOR_DOWNLOAD=y diff --git a/configs/xilinx_zynqmp_mini_defconfig b/configs/xilinx_zynqmp_mini_defconfig index f2eaec2f91b..1f14b0d6e97 100644 --- a/configs/xilinx_zynqmp_mini_defconfig +++ b/configs/xilinx_zynqmp_mini_defconfig @@ -12,15 +12,21 @@ CONFIG_ZYNQMP_PSU_INIT_ENABLED=y CONFIG_SYS_LOAD_ADDR=0x8000000 CONFIG_SYS_MEMTEST_START=0x00000000 CONFIG_SYS_MEMTEST_END=0x00001000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe0000 CONFIG_REMAKE_ELF=y # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_AUTOBOOT is not set # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_BOARD_LATE_INIT is not set CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x40000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1049 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/xilinx_zynqmp_mini_emmc0_defconfig b/configs/xilinx_zynqmp_mini_emmc0_defconfig index b4052771566..a248cbf3a37 100644 --- a/configs/xilinx_zynqmp_mini_emmc0_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig @@ -13,6 +13,8 @@ CONFIG_SPL=y CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set CONFIG_SYS_LOAD_ADDR=0x8000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000 CONFIG_REMAKE_ELF=y # CONFIG_MP is not set CONFIG_FIT=y @@ -22,8 +24,21 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_BOARD_LATE_INIT is not set CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x0 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1049 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/xilinx_zynqmp_mini_emmc1_defconfig b/configs/xilinx_zynqmp_mini_emmc1_defconfig index 5fa1337d761..df0365ba77f 100644 --- a/configs/xilinx_zynqmp_mini_emmc1_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig @@ -13,6 +13,8 @@ CONFIG_SPL=y CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set CONFIG_SYS_LOAD_ADDR=0x8000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000 CONFIG_REMAKE_ELF=y # CONFIG_MP is not set CONFIG_FIT=y @@ -22,8 +24,21 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_BOARD_LATE_INIT is not set CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x0 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1049 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/xilinx_zynqmp_mini_nand_defconfig b/configs/xilinx_zynqmp_mini_nand_defconfig index 90e28203b3f..dd426d505e5 100644 --- a/configs/xilinx_zynqmp_mini_nand_defconfig +++ b/configs/xilinx_zynqmp_mini_nand_defconfig @@ -10,6 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand" CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set CONFIG_SYS_LOAD_ADDR=0x8000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40000 CONFIG_REMAKE_ELF=y # CONFIG_MP is not set CONFIG_FIT=y @@ -19,9 +21,13 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_BOARD_LATE_INIT is not set CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x40000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1049 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/xilinx_zynqmp_mini_nand_single_defconfig b/configs/xilinx_zynqmp_mini_nand_single_defconfig index 1a63ec9195f..1fbd94a969b 100644 --- a/configs/xilinx_zynqmp_mini_nand_single_defconfig +++ b/configs/xilinx_zynqmp_mini_nand_single_defconfig @@ -10,6 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand" CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set CONFIG_SYS_LOAD_ADDR=0x8000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40000 CONFIG_REMAKE_ELF=y # CONFIG_MP is not set CONFIG_FIT=y @@ -19,9 +21,13 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_BOARD_LATE_INIT is not set CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x40000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1049 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index bdda942db6d..82510f19047 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -14,6 +14,8 @@ CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMD_ZYNQMP is not set # CONFIG_PSCI_RESET is not set CONFIG_SYS_LOAD_ADDR=0x8000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xfffe0000 # CONFIG_EXPERT is not set CONFIG_REMAKE_ELF=y # CONFIG_LEGACY_IMAGE_FORMAT is not set @@ -21,9 +23,22 @@ CONFIG_REMAKE_ELF=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_BOARD_LATE_INIT is not set CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x0 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffffc +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1049 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/xilinx_zynqmp_r5_defconfig b/configs/xilinx_zynqmp_r5_defconfig index 3dcfa43af59..1ae63490306 100644 --- a/configs/xilinx_zynqmp_r5_defconfig +++ b/configs/xilinx_zynqmp_r5_defconfig @@ -15,6 +15,9 @@ CONFIG_DEBUG_UART=y CONFIG_BOOTSTAGE=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="ZynqMP r5> " +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=284 # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_EMBED=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 35894076c52..7f0ed8bc225 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -31,15 +31,30 @@ CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="run scsi_init;usb start" CONFIG_BOARD_EARLY_INIT_R=y CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x40000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x0 +CONFIG_SPL_BSS_MAX_SIZE=0x80000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffffc CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20000000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub" +CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin" CONFIG_SPL_FPGA=y CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_SPL_ARGS_ADDR=0x8000000 CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 CONFIG_SPL_ATF=y CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_PBSIZE=2073 CONFIG_CMD_BOOTMENU=y CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_NVEDIT_EFI=y diff --git a/configs/xtfpga_defconfig b/configs/xtfpga_defconfig index 5de17c6c8c6..eab40fc0d13 100644 --- a/configs/xtfpga_defconfig +++ b/configs/xtfpga_defconfig @@ -15,8 +15,10 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press <SPACE> to stop\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_MISC_INIT_R=y +CONFIG_SYS_MALLOC_BOOTPARAMS=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_PBSIZE=1049 CONFIG_CMD_IMLS=y CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y @@ -36,6 +38,7 @@ CONFIG_DM=y # CONFIG_DM_SEQ_ALIAS is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_PHYLIB=y diff --git a/configs/zeropi_defconfig b/configs/zeropi_defconfig index 11f3715e6dc..7d45440c0cc 100644 --- a/configs/zeropi_defconfig +++ b/configs/zeropi_defconfig @@ -8,6 +8,8 @@ CONFIG_MACPWR="PD6" # CONFIG_VIDEO_DE2 is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y +CONFIG_SPL_STACK=0x8000 +CONFIG_SYS_PBSIZE=1024 CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/configs/zynq_cse_nand_defconfig b/configs/zynq_cse_nand_defconfig index b2c5924c256..b69c8b92a48 100644 --- a/configs/zynq_cse_nand_defconfig +++ b/configs/zynq_cse_nand_defconfig @@ -21,10 +21,23 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_BOARD_LATE_INIT is not set CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x30000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000 +CONFIG_SPL_BSS_MAX_SIZE=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffe00 CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1047 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/zynq_cse_nor_defconfig b/configs/zynq_cse_nor_defconfig index 280627e4ca4..ecdbf8182e6 100644 --- a/configs/zynq_cse_nor_defconfig +++ b/configs/zynq_cse_nor_defconfig @@ -21,10 +21,23 @@ CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_BOARD_LATE_INIT is not set CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x30000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000 +CONFIG_SPL_BSS_MAX_SIZE=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffe00 CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1047 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig index 9d4e49e8f3c..49dd5ad6069 100644 --- a/configs/zynq_cse_qspi_defconfig +++ b/configs/zynq_cse_qspi_defconfig @@ -28,12 +28,25 @@ CONFIG_USE_PREBOOT=y # CONFIG_ARCH_EARLY_INIT_R is not set # CONFIG_BOARD_LATE_INIT is not set CONFIG_CLOCKS=y +CONFIG_SPL_MAX_SIZE=0x30000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x20000 +CONFIG_SPL_BSS_MAX_SIZE=0x8000 +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_STACK=0xfffffe00 CONFIG_SPL_STACK_R=y +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set +CONFIG_SYS_MAXARGS=32 +CONFIG_SYS_CBSIZE=1024 +CONFIG_SYS_PBSIZE=1047 # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set diff --git a/doc/develop/driver-model/design.rst b/doc/develop/driver-model/design.rst index 5f33f9fbb32..a75d637ec33 100644 --- a/doc/develop/driver-model/design.rst +++ b/doc/develop/driver-model/design.rst @@ -1135,7 +1135,7 @@ constrained systems. To enable driver model in SPL, define CONFIG_SPL_DM. You might want to consider the following option also. See the main README for more details. - - CONFIG_SYS_MALLOC_SIMPLE + - CONFIG_SPL_SYS_MALLOC_SIMPLE - CONFIG_DM_WARN - CONFIG_DM_DEVICE_REMOVE - CONFIG_DM_STDIO diff --git a/doc/imx/common/imx6.txt b/doc/imx/common/imx6.txt index 9007cfbf587..c5554d8d6b3 100644 --- a/doc/imx/common/imx6.txt +++ b/doc/imx/common/imx6.txt @@ -162,3 +162,34 @@ icorem6qdl> nand write ${loadaddr} uboot ${filesize} NAND write: device 0 offset 0x200000, size 0x8fd26 589094 bytes written: OK icorem6qdl> + +SPL Stack size and location notes +--------------------------------- + +If we have CONFIG_MX6_OCRAM_256KB then see Figure 8.4.1 in IMX6DQ Reference +manuals: + - IMX6DQ OCRAM (IRAM) is from 0x00907000 to 0x0093FFFF + - BOOT ROM stack is at 0x0093FFB8 + - if icache/dcache is enabled (eFuse/strapping controlled) then the + IMX BOOT ROM will setup MMU table at 0x00938000, therefore we need to + fit between 0x00907000 and 0x00938000. + - Additionally the BOOT ROM loads what they consider the firmware image + which consists of a 4K header in front of us that contains the IVT, DCD + and some padding thus 'our' max size is really 0x00908000 - 0x00938000 + or 192KB + - Pad SPL to 196KB (4KB header + 192KB max size). This allows to write the + SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a + boot media (given that boot media specific offset is configured properly). +and if we don't, see Figure 8-3 in IMX6SDL Reference manuals: + - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF + - BOOT ROM stack is at 0x0091FFB8 + - if icache/dcache is enabled (eFuse/strapping controlled) then the + IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to + fit between 0x00907000 and 0x00918000. + - Additionally the BOOT ROM loads what they consider the firmware image + which consists of a 4K header in front of us that contains the IVT, DCD + and some padding thus 'our' max size is really 0x00908000 - 0x00918000 + or 64KB + - Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the + SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a + boot media (given that boot media specific offset is configured properly). diff --git a/doc/imx/common/imx7.txt b/doc/imx/common/imx7.txt new file mode 100644 index 00000000000..b9db10341ad --- /dev/null +++ b/doc/imx/common/imx7.txt @@ -0,0 +1,23 @@ +U-Boot for Freescale i.MX7 + +SPL Stack size and location notes +--------------------------------- +See figure 6-22 in i.MX 7Dual/Solo Reference manuals: + - IMX7D/S OCRAM free area RAM (OCRAM) is from 0x00910000 to + 0x00946C00. + - Set the stack at the end of the free area section, at 0x00946BB8. + - The BOOT ROM loads what they consider the firmware image + which consists of a 4K header in front of us that contains the IVT, DCD + and some padding. However, the manual also states that the ROM uses the + OCRAM_EPCD and OCRAM_PXP areas for itself. While the SPL is free to use + this range for stack and malloc, the SPL itself must fit below 0x920000, + or the image will be truncated in at least some boot modes like USB SDP. + Thus our max size is really 0x00920000 - 0x00912000. If necessary, + CONFIG_SPL_TEXT_BASE could be moved to 0x00911000 to gain 4KB of space + for the SPL, but 56KB should be more than enough for the SPL. + - Pad SPL to 68KB (4KB header + 56KB max size + 8KB extra padding) + The extra padding could be removed, but this value was used historically + based on an incorrect CONFIG_SPL_MAX_SIZE definition. + This allows to write the SPL/U-Boot combination generated with + u-boot-with-spl.imx directly to a boot media (given that boot media specific + offset is configured properly). diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index 408a8d8e28b..27d6578772a 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -15,7 +15,7 @@ config SPL_DM Enable driver model in SPL. You will need to provide a suitable malloc() implementation. If you are not using the full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, - consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you + consider using CONFIG_SPL_SYS_MALLOC_SIMPLE. In that case you must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size. In most cases driver model will only allocate a few uclasses and devices in SPL, so 1KB should be enable. See @@ -28,7 +28,7 @@ config TPL_DM Enable driver model in TPL. You will need to provide a suitable malloc() implementation. If you are not using the full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, - consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you + consider using CONFIG_TPL_SYS_MALLOC_SIMPLE. In that case you must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size. In most cases driver model will only allocate a few uclasses and devices in SPL, so 1KB should be enough. See @@ -43,7 +43,7 @@ config VPL_DM Enable driver model in VPL. You will need to provide a suitable malloc() implementation. If you are not using the full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, - consider using CONFIG_SYS_MALLOC_SIMPLE. + consider using CONFIG_SPL_SYS_MALLOC_SIMPLE. config DM_WARN bool "Enable warnings in driver model" diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig index 5925fe9e287..fe69bef3d3a 100644 --- a/drivers/ddr/fsl/Kconfig +++ b/drivers/ddr/fsl/Kconfig @@ -263,6 +263,20 @@ config SYS_OR7_PRELIM depends on SYS_BR7_PRELIM_BOOL endmenu +if TARGET_P1010RDB_PA || TARGET_P1010RDB_PB || TARGET_P1020RDB_PC || \ + TARGET_P1020RDB_PD || TARGET_P2020RDB + +config COMMON_INIT_DDR + bool "Do not have a TLB entry to cover common DDR init with serial presence detect (SPD)" + +config SPL_COMMON_INIT_DDR + bool "Do not have a TLB entry to cover common DDR init with SPD in SPL" + +config TPL_COMMON_INIT_DDR + bool "Do not have a TLB entry to cover common DDR init with SPD in TPL" + +endif + config SYS_FSL_ERRATUM_A008378 bool diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 5e2921ce41a..c8f9709d2d4 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -484,6 +484,19 @@ config SPL_MMC_SDHCI_ADMA This enables support for the ADMA (Advanced DMA) defined in the SD Host Controller Standard Specification Version 3.00 in SPL. +config FIXED_SDHCI_ALIGNED_BUFFER + hex "SDRAM address for fixed buffer" + depends on SPL && MVEBU_SPL_BOOT_DEVICE_MMC + default 0x00180000 + help + On the Marvell Armada 38x when the SPL runs it located in internal + SRAM which is the L2 cache locked to memory. When the MMC buffers + are located on the stack (or bss), the SDIO controller (SDHCI) can't + write into this L2 cache memory. + + This specifies the address of a fixed buffer located in SDRAM that + will be used for all SDHCI transfers in the SPL. + config MMC_SDHCI_ASPEED bool "Aspeed SDHCI controller" depends on ARCH_ASPEED diff --git a/drivers/mmc/pxa_mmc_gen.c b/drivers/mmc/pxa_mmc_gen.c index 2b45549a143..a0e1a76d571 100644 --- a/drivers/mmc/pxa_mmc_gen.c +++ b/drivers/mmc/pxa_mmc_gen.c @@ -20,12 +20,7 @@ #include <mmc.h> /* PXAMMC Generic default config for various CPUs */ -#if defined(CONFIG_CPU_PXA25X) -#define PXAMMC_FIFO_SIZE 1 -#define PXAMMC_MIN_SPEED 312500 -#define PXAMMC_MAX_SPEED 20000000 -#define PXAMMC_HOST_CAPS (0) -#elif defined(CONFIG_CPU_PXA27X) +#if defined(CONFIG_CPU_PXA27X) #define PXAMMC_CRC_SKIP #define PXAMMC_FIFO_SIZE 32 #define PXAMMC_MIN_SPEED 304000 diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 4088267dd11..d0ab7c18c64 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -48,6 +48,35 @@ config FLASH_CFI_DRIVER option. Visit <http://www.amd.com/products/nvd/overview/cfi.html> for more information on CFI. +choice + prompt "Data-width of the flash device" + depends on FLASH_CFI_DRIVER + default SYS_FLASH_CFI_WIDTH_8BIT + +config SYS_FLASH_CFI_WIDTH_8BIT + bool "Data-width of the device is 8-bit" + +config SYS_FLASH_CFI_WIDTH_16BIT + bool "Data-width of the device is 16-bit" + +config SYS_FLASH_CFI_WIDTH_32BIT + bool "Data-width of the device is 32-bit" + +config SYS_FLASH_CFI_WIDTH_64BIT + bool "Data-width of the device is 64-bit" + +endchoice + +config SYS_FLASH_CFI_WIDTH + hex + depends on FLASH_CFI_DRIVER + default 0x1 if SYS_FLASH_CFI_WIDTH_8BIT + default 0x2 if SYS_FLASH_CFI_WIDTH_16BIT + default 0x4 if SYS_FLASH_CFI_WIDTH_32BIT + default 0x8 if SYS_FLASH_CFI_WIDTH_64BIT + help + This must be kept in sync with the table in include/flash.h + config CFI_FLASH bool "Enable Driver Model for CFI Flash driver" depends on DM_MTD @@ -67,6 +96,10 @@ config CFI_FLASH_USE_WEAK_ACCESSORS Enable this option to allow for the flash_{read,write}{8,16,32,64} functions to be overridden by the platform. +config SYS_CFI_FLASH_STATUS_POLL + bool "Poll status on AMD flash chips" + depends on FLASH_CFI_DRIVER + config SYS_FLASH_USE_BUFFER_WRITE bool "Enable buffered writes to flash" depends on FLASH_CFI_DRIVER diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index aae3ea0d1b4..49504107065 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -68,13 +68,6 @@ static uint flash_verbose = 1; flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */ -/* - * Check if chip width is defined. If not, start detecting with 8bit. - */ -#ifndef CONFIG_SYS_FLASH_CFI_WIDTH -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT -#endif - #ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define __maybe_weak __weak #else diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index d75f371c951..4129a33866b 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -23,6 +23,9 @@ config TPL_SYS_NAND_SELF_INIT This option, if enabled, provides more flexible and linux-like NAND initialization process, in SPL. +config TPL_NAND_INIT + bool + config SYS_NAND_DRIVER_ECC_LAYOUT bool "Omit standard ECC layouts to save space" help @@ -165,6 +168,7 @@ config NAND_FSL_ELBC_DT config NAND_FSL_IFC bool "Support Freescale Integrated Flash Controller NAND driver" select TPL_SYS_NAND_SELF_INIT if TPL_NAND_SUPPORT + select TPL_NAND_INIT if TPL && !TPL_FRAMEWORK select SPL_SYS_NAND_SELF_INIT select SYS_NAND_SELF_INIT select FSL_IFC diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index 6ec3581d20e..e3f6b903f75 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o -obj-$(CONFIG_SPL_NAND_INIT) += nand.o +obj-$(CONFIG_TPL_NAND_INIT) += nand.o ifeq ($(CONFIG_SPL_ENV_SUPPORT),y) obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o endif diff --git a/drivers/mtd/nand/raw/fsl_ifc_spl.c b/drivers/mtd/nand/raw/fsl_ifc_spl.c index b7e37416a49..4d11922a650 100644 --- a/drivers/mtd/nand/raw/fsl_ifc_spl.c +++ b/drivers/mtd/nand/raw/fsl_ifc_spl.c @@ -297,7 +297,7 @@ void nand_boot(void) uboot(); } -#ifndef CONFIG_SPL_NAND_INIT +#ifndef CONFIG_TPL_NAND_INIT void nand_init(void) { } diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h index db324c17d67..f2ba3447459 100644 --- a/drivers/net/smc91111.h +++ b/drivers/net/smc91111.h @@ -66,155 +66,7 @@ struct smc91111_priv{ #define SMC_IO_EXTENT 16 -#ifdef CONFIG_CPU_PXA25X - -#ifdef CONFIG_XSENGINE -#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+((r)<<1)))) -#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+((r)<<1)))) -#define SMC_inb(a,p) ({ \ - unsigned int __p = (unsigned int)((a)->iobase + ((p)<<1)); \ - unsigned int __v = *(volatile unsigned short *)((__p) & ~2); \ - if (__p & 2) __v >>= 8; \ - else __v &= 0xff; \ - __v; }) -#else -#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r)))) -#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+(r)))) -#define SMC_inb(a,p) ({ \ - unsigned int __p = (unsigned int)((a)->iobase + (p)); \ - unsigned int __v = *(volatile unsigned short *)((__p) & ~1); \ - if (__p & 1) __v >>= 8; \ - else __v &= 0xff; \ - __v; }) -#endif - -#ifdef CONFIG_XSENGINE -#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d) -#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r<<1))) = d) -#else -#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d) -#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r))) = d) -#endif - -#define SMC_outb(a,d,r) ({ word __d = (byte)(d); \ - word __w = SMC_inw((a),(r)&~1); \ - __w &= ((r)&1) ? 0x00FF : 0xFF00; \ - __w |= ((r)&1) ? __d<<8 : __d; \ - SMC_outw((a),__w,(r)&~1); \ - }) - -#define SMC_outsl(a,r,b,l) ({ int __i; \ - dword *__b2; \ - __b2 = (dword *) b; \ - for (__i = 0; __i < l; __i++) { \ - SMC_outl((a), *(__b2 + __i), r); \ - } \ - }) - -#define SMC_outsw(a,r,b,l) ({ int __i; \ - word *__b2; \ - __b2 = (word *) b; \ - for (__i = 0; __i < l; __i++) { \ - SMC_outw((a), *(__b2 + __i), r); \ - } \ - }) - -#define SMC_insl(a,r,b,l) ({ int __i ; \ - dword *__b2; \ - __b2 = (dword *) b; \ - for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inl((a),(r)); \ - SMC_inl((a),0); \ - }; \ - }) - -#define SMC_insw(a,r,b,l) ({ int __i ; \ - word *__b2; \ - __b2 = (word *) b; \ - for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inw((a),(r)); \ - SMC_inw((a),0); \ - }; \ - }) - -#define SMC_insb(a,r,b,l) ({ int __i ; \ - byte *__b2; \ - __b2 = (byte *) b; \ - for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inb((a),(r)); \ - SMC_inb((a),0); \ - }; \ - }) - -#elif defined(CONFIG_LEON) /* if not CONFIG_CPU_PXA25X */ - -#define SMC_LEON_SWAP16(_x_) ({ word _x = (_x_); ((_x << 8) | (_x >> 8)); }) - -#define SMC_LEON_SWAP32(_x_) \ - ({ dword _x = (_x_); \ - ((_x << 24) | \ - ((0x0000FF00UL & _x) << 8) | \ - ((0x00FF0000UL & _x) >> 8) | \ - (_x >> 24)); }) - -#define SMC_inl(a,r) (SMC_LEON_SWAP32((*(volatile dword *)((a)->iobase+((r)<<0))))) -#define SMC_inl_nosw(a,r) ((*(volatile dword *)((a)->iobase+((r)<<0)))) -#define SMC_inw(a,r) (SMC_LEON_SWAP16((*(volatile word *)((a)->iobase+((r)<<0))))) -#define SMC_inw_nosw(a,r) ((*(volatile word *)((a)->iobase+((r)<<0)))) -#define SMC_inb(a,p) ({ \ - word ___v = SMC_inw((a),(p) & ~1); \ - if ((p) & 1) ___v >>= 8; \ - else ___v &= 0xff; \ - ___v; }) - -#define SMC_outl(a,d,r) (*(volatile dword *)((a)->iobase+((r)<<0))=SMC_LEON_SWAP32(d)) -#define SMC_outl_nosw(a,d,r) (*(volatile dword *)((a)->iobase+((r)<<0))=(d)) -#define SMC_outw(a,d,r) (*(volatile word *)((a)->iobase+((r)<<0))=SMC_LEON_SWAP16(d)) -#define SMC_outw_nosw(a,d,r) (*(volatile word *)((a)->iobase+((r)<<0))=(d)) -#define SMC_outb(a,d,r) do{ word __d = (byte)(d); \ - word __w = SMC_inw((a),(r)&~1); \ - __w &= ((r)&1) ? 0x00FF : 0xFF00; \ - __w |= ((r)&1) ? __d<<8 : __d; \ - SMC_outw((a),__w,(r)&~1); \ - }while(0) -#define SMC_outsl(a,r,b,l) do{ int __i; \ - dword *__b2; \ - __b2 = (dword *) b; \ - for (__i = 0; __i < l; __i++) { \ - SMC_outl_nosw((a), *(__b2 + __i), r); \ - } \ - }while(0) -#define SMC_outsw(a,r,b,l) do{ int __i; \ - word *__b2; \ - __b2 = (word *) b; \ - for (__i = 0; __i < l; __i++) { \ - SMC_outw_nosw((a), *(__b2 + __i), r); \ - } \ - }while(0) -#define SMC_insl(a,r,b,l) do{ int __i ; \ - dword *__b2; \ - __b2 = (dword *) b; \ - for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inl_nosw((a),(r)); \ - }; \ - }while(0) - -#define SMC_insw(a,r,b,l) do{ int __i ; \ - word *__b2; \ - __b2 = (word *) b; \ - for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inw_nosw((a),(r)); \ - }; \ - }while(0) - -#define SMC_insb(a,r,b,l) do{ int __i ; \ - byte *__b2; \ - __b2 = (byte *) b; \ - for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inb((a),(r)); \ - }; \ - }while(0) -#elif defined(CONFIG_MS7206SE) +#if defined(CONFIG_MS7206SE) #define SWAB7206(x) ({ word __x = x; ((__x << 8)|(__x >> 8)); }) #define SMC_inw(a, r) *((volatile word*)((a)->iobase + (r))) #define SMC_inb(a, r) (*((volatile byte*)((a)->iobase + ((r) ^ 0x01)))) @@ -244,7 +96,7 @@ struct smc91111_priv{ __b2++; \ } \ } while (0) -#else /* if not CONFIG_CPU_PXA25X and not CONFIG_LEON */ +#else #ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */ /* diff --git a/drivers/serial/serial_pxa.c b/drivers/serial/serial_pxa.c index 330fc127ecb..aa928efdc00 100644 --- a/drivers/serial/serial_pxa.c +++ b/drivers/serial/serial_pxa.c @@ -88,7 +88,6 @@ static struct pxa_uart_regs *pxa_uart_index_to_regs(uint32_t uart_index) case FFUART_INDEX: return (struct pxa_uart_regs *)FFUART_BASE; case BTUART_INDEX: return (struct pxa_uart_regs *)BTUART_BASE; case STUART_INDEX: return (struct pxa_uart_regs *)STUART_BASE; - case HWUART_INDEX: return (struct pxa_uart_regs *)HWUART_BASE; default: return NULL; } diff --git a/drivers/timer/omap-timer.c b/drivers/timer/omap-timer.c index 25a6108fef2..aa2e4360c1b 100644 --- a/drivers/timer/omap-timer.c +++ b/drivers/timer/omap-timer.c @@ -11,6 +11,7 @@ #include <timer.h> #include <asm/io.h> #include <asm/arch/clock.h> +#include <asm/omap_common.h> #include <linux/bitops.h> /* Timer register bits */ @@ -61,13 +62,13 @@ static int omap_timer_probe(struct udevice *dev) if (!uc_priv->clock_rate) uc_priv->clock_rate = V_SCLK; - uc_priv->clock_rate /= (2 << CONFIG_SYS_PTV); + uc_priv->clock_rate /= (2 << SYS_PTV); /* start the counter ticking up, reload value on overflow */ writel(0, &priv->regs->tldr); writel(0, &priv->regs->tcrr); /* enable timer */ - writel((CONFIG_SYS_PTV << 2) | TCLR_PRE_EN | TCLR_AUTO_RELOAD | + writel((SYS_PTV << 2) | TCLR_PRE_EN | TCLR_AUTO_RELOAD | TCLR_START, &priv->regs->tclr); return 0; diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index d5d891b2053..d8de8efa0a4 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -37,7 +37,6 @@ ifdef CONFIG_USB_ETHER obj-y += ether.o obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o obj-$(CONFIG_CI_UDC) += ci_udc.o -obj-$(CONFIG_CPU_PXA25X) += pxa25x_udc.o else # Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE ifdef CONFIG_USB_DEVICE diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c deleted file mode 100644 index d19ac1d0353..00000000000 --- a/drivers/usb/gadget/pxa25x_udc.c +++ /dev/null @@ -1,2049 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Intel PXA25x and IXP4xx on-chip full speed USB device controllers - * - * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker) - * Copyright (C) 2003 Robert Schwebel, Pengutronix - * Copyright (C) 2003 Benedikt Spranger, Pengutronix - * Copyright (C) 2003 David Brownell - * Copyright (C) 2003 Joshua Wise - * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com> - * - * MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell"); - */ - -#define CONFIG_USB_PXA25X_SMALL -#define DRIVER_NAME "pxa25x_udc_linux" -#define ARCH_HAS_PREFETCH - -#include <common.h> -#include <errno.h> -#include <log.h> -#include <asm/byteorder.h> -#include <asm/system.h> -#include <asm/mach-types.h> -#include <asm/unaligned.h> -#include <dm/devres.h> -#include <linux/bug.h> -#include <linux/compat.h> -#include <malloc.h> -#include <asm/io.h> -#include <asm/arch/pxa.h> -#include <linux/delay.h> - -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> -#include <asm/arch/pxa-regs.h> - -#include "pxa25x_udc.h" - -/* - * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x - * series processors. The UDC for the IXP 4xx series is very similar. - * There are fifteen endpoints, in addition to ep0. - * - * Such controller drivers work with a gadget driver. The gadget driver - * returns descriptors, implements configuration and data protocols used - * by the host to interact with this device, and allocates endpoints to - * the different protocol interfaces. The controller driver virtualizes - * usb hardware so that the gadget drivers will be more portable. - * - * This UDC hardware wants to implement a bit too much USB protocol, so - * it constrains the sorts of USB configuration change events that work. - * The errata for these chips are misleading; some "fixed" bugs from - * pxa250 a0/a1 b0/b1/b2 sure act like they're still there. - * - * Note that the UDC hardware supports DMA (except on IXP) but that's - * not used here. IN-DMA (to host) is simple enough, when the data is - * suitably aligned (16 bytes) ... the network stack doesn't do that, - * other software can. OUT-DMA is buggy in most chip versions, as well - * as poorly designed (data toggle not automatic). So this driver won't - * bother using DMA. (Mostly-working IN-DMA support was available in - * kernels before 2.6.23, but was never enabled or well tested.) - */ - -#define DRIVER_VERSION "18-August-2012" -#define DRIVER_DESC "PXA 25x USB Device Controller driver" - -static const char driver_name[] = "pxa25x_udc"; -static const char ep0name[] = "ep0"; - -/* Watchdog */ -static inline void start_watchdog(struct pxa25x_udc *udc) -{ - debug("Started watchdog\n"); - udc->watchdog.base = get_timer(0); - udc->watchdog.running = 1; -} - -static inline void stop_watchdog(struct pxa25x_udc *udc) -{ - udc->watchdog.running = 0; - debug("Stopped watchdog\n"); -} - -static inline void test_watchdog(struct pxa25x_udc *udc) -{ - if (!udc->watchdog.running) - return; - - debug("watchdog %ld %ld\n", get_timer(udc->watchdog.base), - udc->watchdog.period); - - if (get_timer(udc->watchdog.base) >= udc->watchdog.period) { - stop_watchdog(udc); - udc->watchdog.function(udc); - } -} - -static void udc_watchdog(struct pxa25x_udc *dev) -{ - uint32_t udccs0 = readl(&dev->regs->udccs[0]); - - debug("Fired up udc_watchdog\n"); - - local_irq_disable(); - if (dev->ep0state == EP0_STALL - && (udccs0 & UDCCS0_FST) == 0 - && (udccs0 & UDCCS0_SST) == 0) { - writel(UDCCS0_FST|UDCCS0_FTF, &dev->regs->udccs[0]); - debug("ep0 re-stall\n"); - start_watchdog(dev); - } - local_irq_enable(); -} - -#ifdef DEBUG - -static const char * const state_name[] = { - "EP0_IDLE", - "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE", - "EP0_END_XFER", "EP0_STALL" -}; - -static void -dump_udccr(const char *label) -{ - u32 udccr = readl(&UDC_REGS->udccr); - debug("%s %02X =%s%s%s%s%s%s%s%s\n", - label, udccr, - (udccr & UDCCR_REM) ? " rem" : "", - (udccr & UDCCR_RSTIR) ? " rstir" : "", - (udccr & UDCCR_SRM) ? " srm" : "", - (udccr & UDCCR_SUSIR) ? " susir" : "", - (udccr & UDCCR_RESIR) ? " resir" : "", - (udccr & UDCCR_RSM) ? " rsm" : "", - (udccr & UDCCR_UDA) ? " uda" : "", - (udccr & UDCCR_UDE) ? " ude" : ""); -} - -static void -dump_udccs0(const char *label) -{ - u32 udccs0 = readl(&UDC_REGS->udccs[0]); - - debug("%s %s %02X =%s%s%s%s%s%s%s%s\n", - label, state_name[the_controller->ep0state], udccs0, - (udccs0 & UDCCS0_SA) ? " sa" : "", - (udccs0 & UDCCS0_RNE) ? " rne" : "", - (udccs0 & UDCCS0_FST) ? " fst" : "", - (udccs0 & UDCCS0_SST) ? " sst" : "", - (udccs0 & UDCCS0_DRWF) ? " dwrf" : "", - (udccs0 & UDCCS0_FTF) ? " ftf" : "", - (udccs0 & UDCCS0_IPR) ? " ipr" : "", - (udccs0 & UDCCS0_OPR) ? " opr" : ""); -} - -static void -dump_state(struct pxa25x_udc *dev) -{ - u32 tmp; - unsigned i; - - debug("%s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", - state_name[dev->ep0state], - readl(&UDC_REGS->uicr1), readl(&UDC_REGS->uicr0), - readl(&UDC_REGS->usir1), readl(&UDC_REGS->usir0), - readl(&UDC_REGS->ufnrh), readl(&UDC_REGS->ufnrl)); - dump_udccr("udccr"); - if (dev->has_cfr) { - tmp = readl(&UDC_REGS->udccfr); - debug("udccfr %02X =%s%s\n", tmp, - (tmp & UDCCFR_AREN) ? " aren" : "", - (tmp & UDCCFR_ACM) ? " acm" : ""); - } - - if (!dev->driver) { - debug("no gadget driver bound\n"); - return; - } else - debug("ep0 driver '%s'\n", "ether"); - - dump_udccs0("udccs0"); - debug("ep0 IN %lu/%lu, OUT %lu/%lu\n", - dev->stats.write.bytes, dev->stats.write.ops, - dev->stats.read.bytes, dev->stats.read.ops); - - for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) { - if (dev->ep[i].desc == NULL) - continue; - debug("udccs%d = %02x\n", i, *dev->ep->reg_udccs); - } -} - -#else /* DEBUG */ - -static inline void dump_udccr(const char *label) { } -static inline void dump_udccs0(const char *label) { } -static inline void dump_state(struct pxa25x_udc *dev) { } - -#endif /* DEBUG */ - -/* - * --------------------------------------------------------------------------- - * endpoint related parts of the api to the usb controller hardware, - * used by gadget driver; and the inner talker-to-hardware core. - * --------------------------------------------------------------------------- - */ - -static void pxa25x_ep_fifo_flush(struct usb_ep *ep); -static void nuke(struct pxa25x_ep *, int status); - -/* one GPIO should control a D+ pullup, so host sees this device (or not) */ -static void pullup_off(void) -{ - struct pxa2xx_udc_mach_info *mach = the_controller->mach; - - if (mach->udc_command) - mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); -} - -static void pullup_on(void) -{ - struct pxa2xx_udc_mach_info *mach = the_controller->mach; - - if (mach->udc_command) - mach->udc_command(PXA2XX_UDC_CMD_CONNECT); -} - -static void pio_irq_enable(int bEndpointAddress) -{ - bEndpointAddress &= 0xf; - if (bEndpointAddress < 8) { - clrbits_le32(&the_controller->regs->uicr0, - 1 << bEndpointAddress); - } else { - bEndpointAddress -= 8; - clrbits_le32(&the_controller->regs->uicr1, - 1 << bEndpointAddress); - } -} - -static void pio_irq_disable(int bEndpointAddress) -{ - bEndpointAddress &= 0xf; - if (bEndpointAddress < 8) { - setbits_le32(&the_controller->regs->uicr0, - 1 << bEndpointAddress); - } else { - bEndpointAddress -= 8; - setbits_le32(&the_controller->regs->uicr1, - 1 << bEndpointAddress); - } -} - -static inline void udc_set_mask_UDCCR(int mask) -{ - /* - * The UDCCR reg contains mask and interrupt status bits, - * so using '|=' isn't safe as it may ack an interrupt. - */ - const uint32_t mask_bits = UDCCR_REM | UDCCR_SRM | UDCCR_UDE; - - mask &= mask_bits; - clrsetbits_le32(&the_controller->regs->udccr, ~mask_bits, mask); -} - -static inline void udc_clear_mask_UDCCR(int mask) -{ - const uint32_t mask_bits = UDCCR_REM | UDCCR_SRM | UDCCR_UDE; - - mask = ~mask & mask_bits; - clrbits_le32(&the_controller->regs->udccr, ~mask); -} - -static inline void udc_ack_int_UDCCR(int mask) -{ - const uint32_t mask_bits = UDCCR_REM | UDCCR_SRM | UDCCR_UDE; - - mask &= ~mask_bits; - clrsetbits_le32(&the_controller->regs->udccr, ~mask_bits, mask); -} - -/* - * endpoint enable/disable - * - * we need to verify the descriptors used to enable endpoints. since pxa25x - * endpoint configurations are fixed, and are pretty much always enabled, - * there's not a lot to manage here. - * - * because pxa25x can't selectively initialize bulk (or interrupt) endpoints, - * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except - * for a single interface (with only the default altsetting) and for gadget - * drivers that don't halt endpoints (not reset by set_interface). that also - * means that if you use ISO, you must violate the USB spec rule that all - * iso endpoints must be in non-default altsettings. - */ -static int pxa25x_ep_enable(struct usb_ep *_ep, - const struct usb_endpoint_descriptor *desc) -{ - struct pxa25x_ep *ep; - struct pxa25x_udc *dev; - - ep = container_of(_ep, struct pxa25x_ep, ep); - if (!_ep || !desc || ep->desc || _ep->name == ep0name - || desc->bDescriptorType != USB_DT_ENDPOINT - || ep->bEndpointAddress != desc->bEndpointAddress - || ep->fifo_size < - le16_to_cpu(get_unaligned(&desc->wMaxPacketSize))) { - printf("%s, bad ep or descriptor\n", __func__); - return -EINVAL; - } - - /* xfer types must match, except that interrupt ~= bulk */ - if (ep->bmAttributes != desc->bmAttributes - && ep->bmAttributes != USB_ENDPOINT_XFER_BULK - && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { - printf("%s, %s type mismatch\n", __func__, _ep->name); - return -EINVAL; - } - - /* hardware _could_ do smaller, but driver doesn't */ - if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK - && le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)) - != BULK_FIFO_SIZE) - || !get_unaligned(&desc->wMaxPacketSize)) { - printf("%s, bad %s maxpacket\n", __func__, _ep->name); - return -ERANGE; - } - - dev = ep->dev; - if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { - printf("%s, bogus device state\n", __func__); - return -ESHUTDOWN; - } - - ep->desc = desc; - ep->stopped = 0; - ep->pio_irqs = 0; - ep->ep.maxpacket = le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)); - - /* flush fifo (mostly for OUT buffers) */ - pxa25x_ep_fifo_flush(_ep); - - /* ... reset halt state too, if we could ... */ - - debug("enabled %s\n", _ep->name); - return 0; -} - -static int pxa25x_ep_disable(struct usb_ep *_ep) -{ - struct pxa25x_ep *ep; - unsigned long flags; - - ep = container_of(_ep, struct pxa25x_ep, ep); - if (!_ep || !ep->desc) { - printf("%s, %s not enabled\n", __func__, - _ep ? ep->ep.name : NULL); - return -EINVAL; - } - local_irq_save(flags); - - nuke(ep, -ESHUTDOWN); - - /* flush fifo (mostly for IN buffers) */ - pxa25x_ep_fifo_flush(_ep); - - ep->desc = NULL; - ep->stopped = 1; - - local_irq_restore(flags); - debug("%s disabled\n", _ep->name); - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* - * for the pxa25x, these can just wrap kmalloc/kfree. gadget drivers - * must still pass correctly initialized endpoints, since other controller - * drivers may care about how it's currently set up (dma issues etc). - */ - -/* - * pxa25x_ep_alloc_request - allocate a request data structure - */ -static struct usb_request * -pxa25x_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) -{ - struct pxa25x_request *req; - - req = kzalloc(sizeof(*req), gfp_flags); - if (!req) - return NULL; - - INIT_LIST_HEAD(&req->queue); - return &req->req; -} - - -/* - * pxa25x_ep_free_request - deallocate a request data structure - */ -static void -pxa25x_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) -{ - struct pxa25x_request *req; - - req = container_of(_req, struct pxa25x_request, req); - WARN_ON(!list_empty(&req->queue)); - kfree(req); -} - -/*-------------------------------------------------------------------------*/ - -/* - * done - retire a request; caller blocked irqs - */ -static void done(struct pxa25x_ep *ep, struct pxa25x_request *req, int status) -{ - unsigned stopped = ep->stopped; - - list_del_init(&req->queue); - - if (likely(req->req.status == -EINPROGRESS)) - req->req.status = status; - else - status = req->req.status; - - if (status && status != -ESHUTDOWN) - debug("complete %s req %p stat %d len %u/%u\n", - ep->ep.name, &req->req, status, - req->req.actual, req->req.length); - - /* don't modify queue heads during completion callback */ - ep->stopped = 1; - req->req.complete(&ep->ep, &req->req); - ep->stopped = stopped; -} - - -static inline void ep0_idle(struct pxa25x_udc *dev) -{ - dev->ep0state = EP0_IDLE; -} - -static int -write_packet(u32 *uddr, struct pxa25x_request *req, unsigned max) -{ - u8 *buf; - unsigned length, count; - - debug("%s(): uddr %p\n", __func__, uddr); - - buf = req->req.buf + req->req.actual; - prefetch(buf); - - /* how big will this packet be? */ - length = min(req->req.length - req->req.actual, max); - req->req.actual += length; - - count = length; - while (likely(count--)) - writeb(*buf++, uddr); - - return length; -} - -/* - * write to an IN endpoint fifo, as many packets as possible. - * irqs will use this to write the rest later. - * caller guarantees at least one packet buffer is ready (or a zlp). - */ -static int -write_fifo(struct pxa25x_ep *ep, struct pxa25x_request *req) -{ - unsigned max; - - max = le16_to_cpu(get_unaligned(&ep->desc->wMaxPacketSize)); - do { - unsigned count; - int is_last, is_short; - - count = write_packet(ep->reg_uddr, req, max); - - /* last packet is usually short (or a zlp) */ - if (unlikely(count != max)) - is_last = is_short = 1; - else { - if (likely(req->req.length != req->req.actual) - || req->req.zero) - is_last = 0; - else - is_last = 1; - /* interrupt/iso maxpacket may not fill the fifo */ - is_short = unlikely(max < ep->fifo_size); - } - - debug_cond(NOISY, "wrote %s %d bytes%s%s %d left %p\n", - ep->ep.name, count, - is_last ? "/L" : "", is_short ? "/S" : "", - req->req.length - req->req.actual, req); - - /* - * let loose that packet. maybe try writing another one, - * double buffering might work. TSP, TPC, and TFS - * bit values are the same for all normal IN endpoints. - */ - writel(UDCCS_BI_TPC, ep->reg_udccs); - if (is_short) - writel(UDCCS_BI_TSP, ep->reg_udccs); - - /* requests complete when all IN data is in the FIFO */ - if (is_last) { - done(ep, req, 0); - if (list_empty(&ep->queue)) - pio_irq_disable(ep->bEndpointAddress); - return 1; - } - - /* - * TODO experiment: how robust can fifo mode tweaking be? - * double buffering is off in the default fifo mode, which - * prevents TFS from being set here. - */ - - } while (readl(ep->reg_udccs) & UDCCS_BI_TFS); - return 0; -} - -/* - * caller asserts req->pending (ep0 irq status nyet cleared); starts - * ep0 data stage. these chips want very simple state transitions. - */ -static inline -void ep0start(struct pxa25x_udc *dev, u32 flags, const char *tag) -{ - writel(flags|UDCCS0_SA|UDCCS0_OPR, &dev->regs->udccs[0]); - writel(USIR0_IR0, &dev->regs->usir0); - dev->req_pending = 0; - debug_cond(NOISY, "%s() %s, udccs0: %02x/%02x usir: %X.%X\n", - __func__, tag, readl(&dev->regs->udccs[0]), flags, - readl(&dev->regs->usir1), readl(&dev->regs->usir0)); -} - -static int -write_ep0_fifo(struct pxa25x_ep *ep, struct pxa25x_request *req) -{ - unsigned count; - int is_short; - - count = write_packet(&ep->dev->regs->uddr0, req, EP0_FIFO_SIZE); - ep->dev->stats.write.bytes += count; - - /* last packet "must be" short (or a zlp) */ - is_short = (count != EP0_FIFO_SIZE); - - debug_cond(NOISY, "ep0in %d bytes %d left %p\n", count, - req->req.length - req->req.actual, req); - - if (unlikely(is_short)) { - if (ep->dev->req_pending) - ep0start(ep->dev, UDCCS0_IPR, "short IN"); - else - writel(UDCCS0_IPR, &ep->dev->regs->udccs[0]); - - count = req->req.length; - done(ep, req, 0); - ep0_idle(ep->dev); - - /* - * This seems to get rid of lost status irqs in some cases: - * host responds quickly, or next request involves config - * change automagic, or should have been hidden, or ... - * - * FIXME get rid of all udelays possible... - */ - if (count >= EP0_FIFO_SIZE) { - count = 100; - do { - if ((readl(&ep->dev->regs->udccs[0]) & - UDCCS0_OPR) != 0) { - /* clear OPR, generate ack */ - writel(UDCCS0_OPR, - &ep->dev->regs->udccs[0]); - break; - } - count--; - udelay(1); - } while (count); - } - } else if (ep->dev->req_pending) - ep0start(ep->dev, 0, "IN"); - - return is_short; -} - - -/* - * read_fifo - unload packet(s) from the fifo we use for usb OUT - * transfers and put them into the request. caller should have made - * sure there's at least one packet ready. - * - * returns true if the request completed because of short packet or the - * request buffer having filled (and maybe overran till end-of-packet). - */ -static int -read_fifo(struct pxa25x_ep *ep, struct pxa25x_request *req) -{ - u32 udccs; - u8 *buf; - unsigned bufferspace, count, is_short; - - for (;;) { - /* - * make sure there's a packet in the FIFO. - * UDCCS_{BO,IO}_RPC are all the same bit value. - * UDCCS_{BO,IO}_RNE are all the same bit value. - */ - udccs = readl(ep->reg_udccs); - if (unlikely((udccs & UDCCS_BO_RPC) == 0)) - break; - buf = req->req.buf + req->req.actual; - prefetchw(buf); - bufferspace = req->req.length - req->req.actual; - - /* read all bytes from this packet */ - if (likely(udccs & UDCCS_BO_RNE)) { - count = 1 + (0x0ff & readl(ep->reg_ubcr)); - req->req.actual += min(count, bufferspace); - } else /* zlp */ - count = 0; - is_short = (count < ep->ep.maxpacket); - debug_cond(NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n", - ep->ep.name, udccs, count, - is_short ? "/S" : "", - req, req->req.actual, req->req.length); - while (likely(count-- != 0)) { - u8 byte = readb(ep->reg_uddr); - - if (unlikely(bufferspace == 0)) { - /* - * this happens when the driver's buffer - * is smaller than what the host sent. - * discard the extra data. - */ - if (req->req.status != -EOVERFLOW) - printf("%s overflow %d\n", - ep->ep.name, count); - req->req.status = -EOVERFLOW; - } else { - *buf++ = byte; - bufferspace--; - } - } - writel(UDCCS_BO_RPC, ep->reg_udccs); - /* RPC/RSP/RNE could now reflect the other packet buffer */ - - /* iso is one request per packet */ - if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { - if (udccs & UDCCS_IO_ROF) - req->req.status = -EHOSTUNREACH; - /* more like "is_done" */ - is_short = 1; - } - - /* completion */ - if (is_short || req->req.actual == req->req.length) { - done(ep, req, 0); - if (list_empty(&ep->queue)) - pio_irq_disable(ep->bEndpointAddress); - return 1; - } - - /* finished that packet. the next one may be waiting... */ - } - return 0; -} - -/* - * special ep0 version of the above. no UBCR0 or double buffering; status - * handshaking is magic. most device protocols don't need control-OUT. - * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other - * protocols do use them. - */ -static int -read_ep0_fifo(struct pxa25x_ep *ep, struct pxa25x_request *req) -{ - u8 *buf, byte; - unsigned bufferspace; - - buf = req->req.buf + req->req.actual; - bufferspace = req->req.length - req->req.actual; - - while (readl(&ep->dev->regs->udccs[0]) & UDCCS0_RNE) { - byte = (u8)readb(&ep->dev->regs->uddr0); - - if (unlikely(bufferspace == 0)) { - /* - * this happens when the driver's buffer - * is smaller than what the host sent. - * discard the extra data. - */ - if (req->req.status != -EOVERFLOW) - printf("%s overflow\n", ep->ep.name); - req->req.status = -EOVERFLOW; - } else { - *buf++ = byte; - req->req.actual++; - bufferspace--; - } - } - - writel(UDCCS0_OPR | UDCCS0_IPR, &ep->dev->regs->udccs[0]); - - /* completion */ - if (req->req.actual >= req->req.length) - return 1; - - /* finished that packet. the next one may be waiting... */ - return 0; -} - -/*-------------------------------------------------------------------------*/ - -static int -pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) -{ - struct pxa25x_request *req; - struct pxa25x_ep *ep; - struct pxa25x_udc *dev; - unsigned long flags; - - req = container_of(_req, struct pxa25x_request, req); - if (unlikely(!_req || !_req->complete || !_req->buf - || !list_empty(&req->queue))) { - printf("%s, bad params\n", __func__); - return -EINVAL; - } - - ep = container_of(_ep, struct pxa25x_ep, ep); - if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { - printf("%s, bad ep\n", __func__); - return -EINVAL; - } - - dev = ep->dev; - if (unlikely(!dev->driver - || dev->gadget.speed == USB_SPEED_UNKNOWN)) { - printf("%s, bogus device state\n", __func__); - return -ESHUTDOWN; - } - - /* - * iso is always one packet per request, that's the only way - * we can report per-packet status. that also helps with dma. - */ - if (unlikely(ep->bmAttributes == USB_ENDPOINT_XFER_ISOC - && req->req.length > - le16_to_cpu(get_unaligned(&ep->desc->wMaxPacketSize)))) - return -EMSGSIZE; - - debug_cond(NOISY, "%s queue req %p, len %d buf %p\n", - _ep->name, _req, _req->length, _req->buf); - - local_irq_save(flags); - - _req->status = -EINPROGRESS; - _req->actual = 0; - - /* kickstart this i/o queue? */ - if (list_empty(&ep->queue) && !ep->stopped) { - if (ep->desc == NULL/* ep0 */) { - unsigned length = _req->length; - - switch (dev->ep0state) { - case EP0_IN_DATA_PHASE: - dev->stats.write.ops++; - if (write_ep0_fifo(ep, req)) - req = NULL; - break; - - case EP0_OUT_DATA_PHASE: - dev->stats.read.ops++; - /* messy ... */ - if (dev->req_config) { - debug("ep0 config ack%s\n", - dev->has_cfr ? "" : " raced"); - if (dev->has_cfr) - writel(UDCCFR_AREN|UDCCFR_ACM - |UDCCFR_MB1, - &ep->dev->regs->udccfr); - done(ep, req, 0); - dev->ep0state = EP0_END_XFER; - local_irq_restore(flags); - return 0; - } - if (dev->req_pending) - ep0start(dev, UDCCS0_IPR, "OUT"); - if (length == 0 || - ((readl( - &ep->dev->regs->udccs[0]) - & UDCCS0_RNE) != 0 - && read_ep0_fifo(ep, req))) { - ep0_idle(dev); - done(ep, req, 0); - req = NULL; - } - break; - - default: - printf("ep0 i/o, odd state %d\n", - dev->ep0state); - local_irq_restore(flags); - return -EL2HLT; - } - /* can the FIFO can satisfy the request immediately? */ - } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) { - if ((readl(ep->reg_udccs) & UDCCS_BI_TFS) != 0 - && write_fifo(ep, req)) - req = NULL; - } else if ((readl(ep->reg_udccs) & UDCCS_BO_RFS) != 0 - && read_fifo(ep, req)) { - req = NULL; - } - - if (likely(req && ep->desc)) - pio_irq_enable(ep->bEndpointAddress); - } - - /* pio or dma irq handler advances the queue. */ - if (likely(req != NULL)) - list_add_tail(&req->queue, &ep->queue); - local_irq_restore(flags); - - return 0; -} - - -/* - * nuke - dequeue ALL requests - */ -static void nuke(struct pxa25x_ep *ep, int status) -{ - struct pxa25x_request *req; - - /* called with irqs blocked */ - while (!list_empty(&ep->queue)) { - req = list_entry(ep->queue.next, - struct pxa25x_request, - queue); - done(ep, req, status); - } - if (ep->desc) - pio_irq_disable(ep->bEndpointAddress); -} - - -/* dequeue JUST ONE request */ -static int pxa25x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) -{ - struct pxa25x_ep *ep; - struct pxa25x_request *req; - unsigned long flags; - - ep = container_of(_ep, struct pxa25x_ep, ep); - if (!_ep || ep->ep.name == ep0name) - return -EINVAL; - - local_irq_save(flags); - - /* make sure it's actually queued on this endpoint */ - list_for_each_entry(req, &ep->queue, queue) { - if (&req->req == _req) - break; - } - if (&req->req != _req) { - local_irq_restore(flags); - return -EINVAL; - } - - done(ep, req, -ECONNRESET); - - local_irq_restore(flags); - return 0; -} - -/*-------------------------------------------------------------------------*/ - -static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value) -{ - struct pxa25x_ep *ep; - unsigned long flags; - - ep = container_of(_ep, struct pxa25x_ep, ep); - if (unlikely(!_ep - || (!ep->desc && ep->ep.name != ep0name)) - || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) { - printf("%s, bad ep\n", __func__); - return -EINVAL; - } - if (value == 0) { - /* - * this path (reset toggle+halt) is needed to implement - * SET_INTERFACE on normal hardware. but it can't be - * done from software on the PXA UDC, and the hardware - * forgets to do it as part of SET_INTERFACE automagic. - */ - printf("only host can clear %s halt\n", _ep->name); - return -EROFS; - } - - local_irq_save(flags); - - if ((ep->bEndpointAddress & USB_DIR_IN) != 0 - && ((readl(ep->reg_udccs) & UDCCS_BI_TFS) == 0 - || !list_empty(&ep->queue))) { - local_irq_restore(flags); - return -EAGAIN; - } - - /* FST bit is the same for control, bulk in, bulk out, interrupt in */ - writel(UDCCS_BI_FST|UDCCS_BI_FTF, ep->reg_udccs); - - /* ep0 needs special care */ - if (!ep->desc) { - start_watchdog(ep->dev); - ep->dev->req_pending = 0; - ep->dev->ep0state = EP0_STALL; - - /* and bulk/intr endpoints like dropping stalls too */ - } else { - unsigned i; - for (i = 0; i < 1000; i += 20) { - if (readl(ep->reg_udccs) & UDCCS_BI_SST) - break; - udelay(20); - } - } - local_irq_restore(flags); - - debug("%s halt\n", _ep->name); - return 0; -} - -static int pxa25x_ep_fifo_status(struct usb_ep *_ep) -{ - struct pxa25x_ep *ep; - - ep = container_of(_ep, struct pxa25x_ep, ep); - if (!_ep) { - printf("%s, bad ep\n", __func__); - return -ENODEV; - } - /* pxa can't report unclaimed bytes from IN fifos */ - if ((ep->bEndpointAddress & USB_DIR_IN) != 0) - return -EOPNOTSUPP; - if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN - || (readl(ep->reg_udccs) & UDCCS_BO_RFS) == 0) - return 0; - else - return (readl(ep->reg_ubcr) & 0xfff) + 1; -} - -static void pxa25x_ep_fifo_flush(struct usb_ep *_ep) -{ - struct pxa25x_ep *ep; - - ep = container_of(_ep, struct pxa25x_ep, ep); - if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) { - printf("%s, bad ep\n", __func__); - return; - } - - /* toggle and halt bits stay unchanged */ - - /* for OUT, just read and discard the FIFO contents. */ - if ((ep->bEndpointAddress & USB_DIR_IN) == 0) { - while (((readl(ep->reg_udccs)) & UDCCS_BO_RNE) != 0) - (void)readb(ep->reg_uddr); - return; - } - - /* most IN status is the same, but ISO can't stall */ - writel(UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR - | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC - ? 0 : UDCCS_BI_SST), ep->reg_udccs); -} - - -static struct usb_ep_ops pxa25x_ep_ops = { - .enable = pxa25x_ep_enable, - .disable = pxa25x_ep_disable, - - .alloc_request = pxa25x_ep_alloc_request, - .free_request = pxa25x_ep_free_request, - - .queue = pxa25x_ep_queue, - .dequeue = pxa25x_ep_dequeue, - - .set_halt = pxa25x_ep_set_halt, - .fifo_status = pxa25x_ep_fifo_status, - .fifo_flush = pxa25x_ep_fifo_flush, -}; - - -/* --------------------------------------------------------------------------- - * device-scoped parts of the api to the usb controller hardware - * --------------------------------------------------------------------------- - */ - -static int pxa25x_udc_get_frame(struct usb_gadget *_gadget) -{ - return ((readl(&the_controller->regs->ufnrh) & 0x07) << 8) | - (readl(&the_controller->regs->ufnrl) & 0xff); -} - -static int pxa25x_udc_wakeup(struct usb_gadget *_gadget) -{ - /* host may not have enabled remote wakeup */ - if ((readl(&the_controller->regs->udccs[0]) & UDCCS0_DRWF) == 0) - return -EHOSTUNREACH; - udc_set_mask_UDCCR(UDCCR_RSM); - return 0; -} - -static void stop_activity(struct pxa25x_udc *, struct usb_gadget_driver *); -static void udc_enable(struct pxa25x_udc *); -static void udc_disable(struct pxa25x_udc *); - -/* - * We disable the UDC -- and its 48 MHz clock -- whenever it's not - * in active use. - */ -static int pullup(struct pxa25x_udc *udc) -{ - if (udc->pullup) - pullup_on(); - else - pullup_off(); - - - int is_active = udc->pullup; - if (is_active) { - if (!udc->active) { - udc->active = 1; - udc_enable(udc); - } - } else { - if (udc->active) { - if (udc->gadget.speed != USB_SPEED_UNKNOWN) - stop_activity(udc, udc->driver); - udc_disable(udc); - udc->active = 0; - } - - } - return 0; -} - -/* VBUS reporting logically comes from a transceiver */ -static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active) -{ - struct pxa25x_udc *udc; - - udc = container_of(_gadget, struct pxa25x_udc, gadget); - printf("vbus %s\n", is_active ? "supplied" : "inactive"); - pullup(udc); - return 0; -} - -/* drivers may have software control over D+ pullup */ -static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active) -{ - struct pxa25x_udc *udc; - - udc = container_of(_gadget, struct pxa25x_udc, gadget); - - /* not all boards support pullup control */ - if (!udc->mach->udc_command) - return -EOPNOTSUPP; - - udc->pullup = (is_active != 0); - pullup(udc); - return 0; -} - -/* - * boards may consume current from VBUS, up to 100-500mA based on config. - * the 500uA suspend ceiling means that exclusively vbus-powered PXA designs - * violate USB specs. - */ -static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) -{ - return -EOPNOTSUPP; -} - -static const struct usb_gadget_ops pxa25x_udc_ops = { - .get_frame = pxa25x_udc_get_frame, - .wakeup = pxa25x_udc_wakeup, - .vbus_session = pxa25x_udc_vbus_session, - .pullup = pxa25x_udc_pullup, - .vbus_draw = pxa25x_udc_vbus_draw, -}; - -/*-------------------------------------------------------------------------*/ - -/* - * udc_disable - disable USB device controller - */ -static void udc_disable(struct pxa25x_udc *dev) -{ - /* block all irqs */ - udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM); - writel(0xff, &dev->regs->uicr0); - writel(0xff, &dev->regs->uicr1); - writel(UFNRH_SIM, &dev->regs->ufnrh); - - /* if hardware supports it, disconnect from usb */ - pullup_off(); - - udc_clear_mask_UDCCR(UDCCR_UDE); - - ep0_idle(dev); - dev->gadget.speed = USB_SPEED_UNKNOWN; -} - -/* - * udc_reinit - initialize software state - */ -static void udc_reinit(struct pxa25x_udc *dev) -{ - u32 i; - - /* device/ep0 records init */ - INIT_LIST_HEAD(&dev->gadget.ep_list); - INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); - dev->ep0state = EP0_IDLE; - - /* basic endpoint records init */ - for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { - struct pxa25x_ep *ep = &dev->ep[i]; - - if (i != 0) - list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); - - ep->desc = NULL; - ep->stopped = 0; - INIT_LIST_HEAD(&ep->queue); - ep->pio_irqs = 0; - } - - /* the rest was statically initialized, and is read-only */ -} - -/* - * until it's enabled, this UDC should be completely invisible - * to any USB host. - */ -static void udc_enable(struct pxa25x_udc *dev) -{ - debug("udc: enabling udc\n"); - - udc_clear_mask_UDCCR(UDCCR_UDE); - - /* - * Try to clear these bits before we enable the udc. - * Do not touch reset ack bit, we would take care of it in - * interrupt handle routine - */ - udc_ack_int_UDCCR(UDCCR_SUSIR|UDCCR_RESIR); - - ep0_idle(dev); - dev->gadget.speed = USB_SPEED_UNKNOWN; - dev->stats.irqs = 0; - - /* - * sequence taken from chapter 12.5.10, PXA250 AppProcDevManual: - * - enable UDC - * - if RESET is already in progress, ack interrupt - * - unmask reset interrupt - */ - udc_set_mask_UDCCR(UDCCR_UDE); - if (!(readl(&dev->regs->udccr) & UDCCR_UDA)) - udc_ack_int_UDCCR(UDCCR_RSTIR); - - if (dev->has_cfr /* UDC_RES2 is defined */) { - /* - * pxa255 (a0+) can avoid a set_config race that could - * prevent gadget drivers from configuring correctly - */ - writel(UDCCFR_ACM | UDCCFR_MB1, &dev->regs->udccfr); - } - - /* enable suspend/resume and reset irqs */ - udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM); - - /* enable ep0 irqs */ - clrbits_le32(&dev->regs->uicr0, UICR0_IM0); - - /* if hardware supports it, pullup D+ and wait for reset */ - pullup_on(); -} - -static inline void clear_ep_state(struct pxa25x_udc *dev) -{ - unsigned i; - - /* - * hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint - * fifos, and pending transactions mustn't be continued in any case. - */ - for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) - nuke(&dev->ep[i], -ECONNABORTED); -} - -static void handle_ep0(struct pxa25x_udc *dev) -{ - u32 udccs0 = readl(&dev->regs->udccs[0]); - struct pxa25x_ep *ep = &dev->ep[0]; - struct pxa25x_request *req; - union { - struct usb_ctrlrequest r; - u8 raw[8]; - u32 word[2]; - } u; - - if (list_empty(&ep->queue)) - req = NULL; - else - req = list_entry(ep->queue.next, struct pxa25x_request, queue); - - /* clear stall status */ - if (udccs0 & UDCCS0_SST) { - nuke(ep, -EPIPE); - writel(UDCCS0_SST, &dev->regs->udccs[0]); - stop_watchdog(dev); - ep0_idle(dev); - } - - /* previous request unfinished? non-error iff back-to-back ... */ - if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) { - nuke(ep, 0); - stop_watchdog(dev); - ep0_idle(dev); - } - - switch (dev->ep0state) { - case EP0_IDLE: - /* late-breaking status? */ - udccs0 = readl(&dev->regs->udccs[0]); - - /* start control request? */ - if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE)) - == (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) { - int i; - - nuke(ep, -EPROTO); - - /* read SETUP packet */ - for (i = 0; i < 8; i++) { - if (unlikely(!(readl(&dev->regs->udccs[0]) & - UDCCS0_RNE))) { -bad_setup: - debug("SETUP %d!\n", i); - goto stall; - } - u.raw[i] = (u8)readb(&dev->regs->uddr0); - } - if (unlikely((readl(&dev->regs->udccs[0]) & - UDCCS0_RNE) != 0)) - goto bad_setup; - -got_setup: - debug("SETUP %02x.%02x v%04x i%04x l%04x\n", - u.r.bRequestType, u.r.bRequest, - le16_to_cpu(u.r.wValue), - le16_to_cpu(u.r.wIndex), - le16_to_cpu(u.r.wLength)); - - /* cope with automagic for some standard requests. */ - dev->req_std = (u.r.bRequestType & USB_TYPE_MASK) - == USB_TYPE_STANDARD; - dev->req_config = 0; - dev->req_pending = 1; - switch (u.r.bRequest) { - /* hardware restricts gadget drivers here! */ - case USB_REQ_SET_CONFIGURATION: - debug("GOT SET_CONFIGURATION\n"); - if (u.r.bRequestType == USB_RECIP_DEVICE) { - /* - * reflect hardware's automagic - * up to the gadget driver. - */ -config_change: - dev->req_config = 1; - clear_ep_state(dev); - /* - * if !has_cfr, there's no synch - * else use AREN (later) not SA|OPR - * USIR0_IR0 acts edge sensitive - */ - } - break; - /* ... and here, even more ... */ - case USB_REQ_SET_INTERFACE: - if (u.r.bRequestType == USB_RECIP_INTERFACE) { - /* - * udc hardware is broken by design: - * - altsetting may only be zero; - * - hw resets all interfaces' eps; - * - ep reset doesn't include halt(?). - */ - printf("broken set_interface (%d/%d)\n", - le16_to_cpu(u.r.wIndex), - le16_to_cpu(u.r.wValue)); - goto config_change; - } - break; - /* hardware was supposed to hide this */ - case USB_REQ_SET_ADDRESS: - debug("GOT SET ADDRESS\n"); - if (u.r.bRequestType == USB_RECIP_DEVICE) { - ep0start(dev, 0, "address"); - return; - } - break; - } - - if (u.r.bRequestType & USB_DIR_IN) - dev->ep0state = EP0_IN_DATA_PHASE; - else - dev->ep0state = EP0_OUT_DATA_PHASE; - - i = dev->driver->setup(&dev->gadget, &u.r); - if (i < 0) { - /* hardware automagic preventing STALL... */ - if (dev->req_config) { - /* - * hardware sometimes neglects to tell - * tell us about config change events, - * so later ones may fail... - */ - printf("config change %02x fail %d?\n", - u.r.bRequest, i); - return; - /* - * TODO experiment: if has_cfr, - * hardware didn't ACK; maybe we - * could actually STALL! - */ - } - if (0) { -stall: - /* uninitialized when goto stall */ - i = 0; - } - debug("protocol STALL, " - "%02x err %d\n", - readl(&dev->regs->udccs[0]), i); - - /* - * the watchdog timer helps deal with cases - * where udc seems to clear FST wrongly, and - * then NAKs instead of STALLing. - */ - ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall"); - start_watchdog(dev); - dev->ep0state = EP0_STALL; - - /* deferred i/o == no response yet */ - } else if (dev->req_pending) { - if (likely(dev->ep0state == EP0_IN_DATA_PHASE - || dev->req_std || u.r.wLength)) - ep0start(dev, 0, "defer"); - else - ep0start(dev, UDCCS0_IPR, "defer/IPR"); - } - - /* expect at least one data or status stage irq */ - return; - - } else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA)) - == (UDCCS0_OPR|UDCCS0_SA))) { - unsigned i; - - /* - * pxa210/250 erratum 131 for B0/B1 says RNE lies. - * still observed on a pxa255 a0. - */ - debug("e131\n"); - nuke(ep, -EPROTO); - - /* read SETUP data, but don't trust it too much */ - for (i = 0; i < 8; i++) - u.raw[i] = (u8)readb(&dev->regs->uddr0); - if ((u.r.bRequestType & USB_RECIP_MASK) - > USB_RECIP_OTHER) - goto stall; - if (u.word[0] == 0 && u.word[1] == 0) - goto stall; - goto got_setup; - } else { - /* - * some random early IRQ: - * - we acked FST - * - IPR cleared - * - OPR got set, without SA (likely status stage) - */ - debug("random IRQ %X %X\n", udccs0, - readl(&dev->regs->udccs[0])); - writel(udccs0 & (UDCCS0_SA|UDCCS0_OPR), - &dev->regs->udccs[0]); - } - break; - case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ - if (udccs0 & UDCCS0_OPR) { - debug("ep0in premature status\n"); - if (req) - done(ep, req, 0); - ep0_idle(dev); - } else /* irq was IPR clearing */ { - if (req) { - debug("next ep0 in packet\n"); - /* this IN packet might finish the request */ - (void) write_ep0_fifo(ep, req); - } /* else IN token before response was written */ - } - break; - case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ - if (udccs0 & UDCCS0_OPR) { - if (req) { - /* this OUT packet might finish the request */ - if (read_ep0_fifo(ep, req)) - done(ep, req, 0); - /* else more OUT packets expected */ - } /* else OUT token before read was issued */ - } else /* irq was IPR clearing */ { - debug("ep0out premature status\n"); - if (req) - done(ep, req, 0); - ep0_idle(dev); - } - break; - case EP0_END_XFER: - if (req) - done(ep, req, 0); - /* - * ack control-IN status (maybe in-zlp was skipped) - * also appears after some config change events. - */ - if (udccs0 & UDCCS0_OPR) - writel(UDCCS0_OPR, &dev->regs->udccs[0]); - ep0_idle(dev); - break; - case EP0_STALL: - writel(UDCCS0_FST, &dev->regs->udccs[0]); - break; - } - - writel(USIR0_IR0, &dev->regs->usir0); -} - -static void handle_ep(struct pxa25x_ep *ep) -{ - struct pxa25x_request *req; - int is_in = ep->bEndpointAddress & USB_DIR_IN; - int completed; - u32 udccs, tmp; - - do { - completed = 0; - if (likely(!list_empty(&ep->queue))) - req = list_entry(ep->queue.next, - struct pxa25x_request, queue); - else - req = NULL; - - /* TODO check FST handling */ - - udccs = readl(ep->reg_udccs); - if (unlikely(is_in)) { /* irq from TPC, SST, or (ISO) TUR */ - tmp = UDCCS_BI_TUR; - if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK)) - tmp |= UDCCS_BI_SST; - tmp &= udccs; - if (likely(tmp)) - writel(tmp, ep->reg_udccs); - if (req && likely((udccs & UDCCS_BI_TFS) != 0)) - completed = write_fifo(ep, req); - - } else { /* irq from RPC (or for ISO, ROF) */ - if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK)) - tmp = UDCCS_BO_SST | UDCCS_BO_DME; - else - tmp = UDCCS_IO_ROF | UDCCS_IO_DME; - tmp &= udccs; - if (likely(tmp)) - writel(tmp, ep->reg_udccs); - - /* fifos can hold packets, ready for reading... */ - if (likely(req)) - completed = read_fifo(ep, req); - else - pio_irq_disable(ep->bEndpointAddress); - } - ep->pio_irqs++; - } while (completed); -} - -/* - * pxa25x_udc_irq - interrupt handler - * - * avoid delays in ep0 processing. the control handshaking isn't always - * under software control (pxa250c0 and the pxa255 are better), and delays - * could cause usb protocol errors. - */ -static struct pxa25x_udc memory; -static int -pxa25x_udc_irq(void) -{ - struct pxa25x_udc *dev = &memory; - int handled; - - test_watchdog(dev); - - dev->stats.irqs++; - do { - u32 udccr = readl(&dev->regs->udccr); - - handled = 0; - - /* SUSpend Interrupt Request */ - if (unlikely(udccr & UDCCR_SUSIR)) { - udc_ack_int_UDCCR(UDCCR_SUSIR); - handled = 1; - debug("USB suspend\n"); - - if (dev->gadget.speed != USB_SPEED_UNKNOWN - && dev->driver - && dev->driver->suspend) - dev->driver->suspend(&dev->gadget); - ep0_idle(dev); - } - - /* RESume Interrupt Request */ - if (unlikely(udccr & UDCCR_RESIR)) { - udc_ack_int_UDCCR(UDCCR_RESIR); - handled = 1; - debug("USB resume\n"); - - if (dev->gadget.speed != USB_SPEED_UNKNOWN - && dev->driver - && dev->driver->resume) - dev->driver->resume(&dev->gadget); - } - - /* ReSeT Interrupt Request - USB reset */ - if (unlikely(udccr & UDCCR_RSTIR)) { - udc_ack_int_UDCCR(UDCCR_RSTIR); - handled = 1; - - if ((readl(&dev->regs->udccr) & UDCCR_UDA) == 0) { - debug("USB reset start\n"); - - /* - * reset driver and endpoints, - * in case that's not yet done - */ - stop_activity(dev, dev->driver); - - } else { - debug("USB reset end\n"); - dev->gadget.speed = USB_SPEED_FULL; - memset(&dev->stats, 0, sizeof dev->stats); - /* driver and endpoints are still reset */ - } - - } else { - u32 uicr0 = readl(&dev->regs->uicr0); - u32 uicr1 = readl(&dev->regs->uicr1); - u32 usir0 = readl(&dev->regs->usir0); - u32 usir1 = readl(&dev->regs->usir1); - - usir0 = usir0 & ~uicr0; - usir1 = usir1 & ~uicr1; - int i; - - if (unlikely(!usir0 && !usir1)) - continue; - - debug_cond(NOISY, "irq %02x.%02x\n", usir1, usir0); - - /* control traffic */ - if (usir0 & USIR0_IR0) { - dev->ep[0].pio_irqs++; - handle_ep0(dev); - handled = 1; - } - - /* endpoint data transfers */ - for (i = 0; i < 8; i++) { - u32 tmp = 1 << i; - - if (i && (usir0 & tmp)) { - handle_ep(&dev->ep[i]); - setbits_le32(&dev->regs->usir0, tmp); - handled = 1; - } -#ifndef CONFIG_USB_PXA25X_SMALL - if (usir1 & tmp) { - handle_ep(&dev->ep[i+8]); - setbits_le32(&dev->regs->usir1, tmp); - handled = 1; - } -#endif - } - } - - /* we could also ask for 1 msec SOF (SIR) interrupts */ - - } while (handled); - return IRQ_HANDLED; -} - -/*-------------------------------------------------------------------------*/ - -/* - * this uses load-time allocation and initialization (instead of - * doing it at run-time) to save code, eliminate fault paths, and - * be more obviously correct. - */ -static struct pxa25x_udc memory = { - .regs = UDC_REGS, - - .gadget = { - .ops = &pxa25x_udc_ops, - .ep0 = &memory.ep[0].ep, - .name = driver_name, - }, - - /* control endpoint */ - .ep[0] = { - .ep = { - .name = ep0name, - .ops = &pxa25x_ep_ops, - .maxpacket = EP0_FIFO_SIZE, - }, - .dev = &memory, - .reg_udccs = &UDC_REGS->udccs[0], - .reg_uddr = &UDC_REGS->uddr0, - }, - - /* first group of endpoints */ - .ep[1] = { - .ep = { - .name = "ep1in-bulk", - .ops = &pxa25x_ep_ops, - .maxpacket = BULK_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = BULK_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 1, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .reg_udccs = &UDC_REGS->udccs[1], - .reg_uddr = &UDC_REGS->uddr1, - }, - .ep[2] = { - .ep = { - .name = "ep2out-bulk", - .ops = &pxa25x_ep_ops, - .maxpacket = BULK_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = BULK_FIFO_SIZE, - .bEndpointAddress = 2, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .reg_udccs = &UDC_REGS->udccs[2], - .reg_ubcr = &UDC_REGS->ubcr2, - .reg_uddr = &UDC_REGS->uddr2, - }, -#ifndef CONFIG_USB_PXA25X_SMALL - .ep[3] = { - .ep = { - .name = "ep3in-iso", - .ops = &pxa25x_ep_ops, - .maxpacket = ISO_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = ISO_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 3, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .reg_udccs = &UDC_REGS->udccs[3], - .reg_uddr = &UDC_REGS->uddr3, - }, - .ep[4] = { - .ep = { - .name = "ep4out-iso", - .ops = &pxa25x_ep_ops, - .maxpacket = ISO_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = ISO_FIFO_SIZE, - .bEndpointAddress = 4, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .reg_udccs = &UDC_REGS->udccs[4], - .reg_ubcr = &UDC_REGS->ubcr4, - .reg_uddr = &UDC_REGS->uddr4, - }, - .ep[5] = { - .ep = { - .name = "ep5in-int", - .ops = &pxa25x_ep_ops, - .maxpacket = INT_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = INT_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 5, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .reg_udccs = &UDC_REGS->udccs[5], - .reg_uddr = &UDC_REGS->uddr5, - }, - - /* second group of endpoints */ - .ep[6] = { - .ep = { - .name = "ep6in-bulk", - .ops = &pxa25x_ep_ops, - .maxpacket = BULK_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = BULK_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 6, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .reg_udccs = &UDC_REGS->udccs[6], - .reg_uddr = &UDC_REGS->uddr6, - }, - .ep[7] = { - .ep = { - .name = "ep7out-bulk", - .ops = &pxa25x_ep_ops, - .maxpacket = BULK_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = BULK_FIFO_SIZE, - .bEndpointAddress = 7, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .reg_udccs = &UDC_REGS->udccs[7], - .reg_ubcr = &UDC_REGS->ubcr7, - .reg_uddr = &UDC_REGS->uddr7, - }, - .ep[8] = { - .ep = { - .name = "ep8in-iso", - .ops = &pxa25x_ep_ops, - .maxpacket = ISO_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = ISO_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 8, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .reg_udccs = &UDC_REGS->udccs[8], - .reg_uddr = &UDC_REGS->uddr8, - }, - .ep[9] = { - .ep = { - .name = "ep9out-iso", - .ops = &pxa25x_ep_ops, - .maxpacket = ISO_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = ISO_FIFO_SIZE, - .bEndpointAddress = 9, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .reg_udccs = &UDC_REGS->udccs[9], - .reg_ubcr = &UDC_REGS->ubcr9, - .reg_uddr = &UDC_REGS->uddr9, - }, - .ep[10] = { - .ep = { - .name = "ep10in-int", - .ops = &pxa25x_ep_ops, - .maxpacket = INT_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = INT_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 10, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .reg_udccs = &UDC_REGS->udccs[10], - .reg_uddr = &UDC_REGS->uddr10, - }, - - /* third group of endpoints */ - .ep[11] = { - .ep = { - .name = "ep11in-bulk", - .ops = &pxa25x_ep_ops, - .maxpacket = BULK_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = BULK_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 11, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .reg_udccs = &UDC_REGS->udccs[11], - .reg_uddr = &UDC_REGS->uddr11, - }, - .ep[12] = { - .ep = { - .name = "ep12out-bulk", - .ops = &pxa25x_ep_ops, - .maxpacket = BULK_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = BULK_FIFO_SIZE, - .bEndpointAddress = 12, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .reg_udccs = &UDC_REGS->udccs[12], - .reg_ubcr = &UDC_REGS->ubcr12, - .reg_uddr = &UDC_REGS->uddr12, - }, - .ep[13] = { - .ep = { - .name = "ep13in-iso", - .ops = &pxa25x_ep_ops, - .maxpacket = ISO_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = ISO_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 13, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .reg_udccs = &UDC_REGS->udccs[13], - .reg_uddr = &UDC_REGS->uddr13, - }, - .ep[14] = { - .ep = { - .name = "ep14out-iso", - .ops = &pxa25x_ep_ops, - .maxpacket = ISO_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = ISO_FIFO_SIZE, - .bEndpointAddress = 14, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .reg_udccs = &UDC_REGS->udccs[14], - .reg_ubcr = &UDC_REGS->ubcr14, - .reg_uddr = &UDC_REGS->uddr14, - }, - .ep[15] = { - .ep = { - .name = "ep15in-int", - .ops = &pxa25x_ep_ops, - .maxpacket = INT_FIFO_SIZE, - }, - .dev = &memory, - .fifo_size = INT_FIFO_SIZE, - .bEndpointAddress = USB_DIR_IN | 15, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .reg_udccs = &UDC_REGS->udccs[15], - .reg_uddr = &UDC_REGS->uddr15, - }, -#endif /* !CONFIG_USB_PXA25X_SMALL */ -}; - -static void udc_command(int cmd) -{ - switch (cmd) { - case PXA2XX_UDC_CMD_CONNECT: - setbits_le32(GPDR(CONFIG_USB_DEV_PULLUP_GPIO), - GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO)); - - /* enable pullup */ - writel(GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO), - GPCR(CONFIG_USB_DEV_PULLUP_GPIO)); - - debug("Connected to USB\n"); - break; - - case PXA2XX_UDC_CMD_DISCONNECT: - /* disable pullup resistor */ - writel(GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO), - GPSR(CONFIG_USB_DEV_PULLUP_GPIO)); - - /* setup pin as input, line will float */ - clrbits_le32(GPDR(CONFIG_USB_DEV_PULLUP_GPIO), - GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO)); - - debug("Disconnected from USB\n"); - break; - } -} - -static struct pxa2xx_udc_mach_info mach_info = { - .udc_command = udc_command, -}; - -/* - * when a driver is successfully registered, it will receive - * control requests including set_configuration(), which enables - * non-control requests. then usb traffic follows until a - * disconnect is reported. then a host may connect again, or - * the driver might get unbound. - */ -int usb_gadget_register_driver(struct usb_gadget_driver *driver) -{ - struct pxa25x_udc *dev = &memory; - int retval; - uint32_t chiprev; - - if (!driver - || driver->speed < USB_SPEED_FULL - || !driver->disconnect - || !driver->setup) - return -EINVAL; - if (!dev) - return -ENODEV; - if (dev->driver) - return -EBUSY; - - /* Enable clock for usb controller */ - setbits_le32(CKEN, CKEN11_USB); - - /* first hook up the driver ... */ - dev->driver = driver; - dev->pullup = 1; - - /* trigger chiprev-specific logic */ - switch ((chiprev = pxa_get_cpu_revision())) { - case PXA255_A0: - dev->has_cfr = 1; - break; - case PXA250_A0: - case PXA250_A1: - /* A0/A1 "not released"; ep 13, 15 unusable */ - /* fall through */ - case PXA250_B2: case PXA210_B2: - case PXA250_B1: case PXA210_B1: - case PXA250_B0: case PXA210_B0: - /* OUT-DMA is broken ... */ - /* fall through */ - case PXA250_C0: case PXA210_C0: - break; - default: - printf("%s: unrecognized processor: %08x\n", - DRIVER_NAME, chiprev); - return -ENODEV; - } - - the_controller = dev; - - /* prepare watchdog timer */ - dev->watchdog.running = 0; - dev->watchdog.period = 5000 * CONFIG_SYS_HZ / 1000000; /* 5 ms */ - dev->watchdog.function = udc_watchdog; - - dev->mach = &mach_info; - - udc_disable(dev); - udc_reinit(dev); - - dev->gadget.name = "pxa2xx_udc"; - retval = driver->bind(&dev->gadget); - if (retval) { - printf("bind to driver %s --> error %d\n", - DRIVER_NAME, retval); - dev->driver = NULL; - return retval; - } - - /* - * ... then enable host detection and ep0; and we're ready - * for set_configuration as well as eventual disconnect. - */ - printf("registered gadget driver '%s'\n", DRIVER_NAME); - - pullup(dev); - dump_state(dev); - return 0; -} - -static void -stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver) -{ - int i; - - /* don't disconnect drivers more than once */ - if (dev->gadget.speed == USB_SPEED_UNKNOWN) - driver = NULL; - dev->gadget.speed = USB_SPEED_UNKNOWN; - - /* prevent new request submissions, kill any outstanding requests */ - for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) { - struct pxa25x_ep *ep = &dev->ep[i]; - - ep->stopped = 1; - nuke(ep, -ESHUTDOWN); - } - stop_watchdog(dev); - - /* report disconnect; the driver is already quiesced */ - if (driver) - driver->disconnect(&dev->gadget); - - /* re-init driver-visible data structures */ - udc_reinit(dev); -} - -int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) -{ - struct pxa25x_udc *dev = the_controller; - - if (!dev) - return -ENODEV; - if (!driver || driver != dev->driver || !driver->unbind) - return -EINVAL; - - local_irq_disable(); - dev->pullup = 0; - pullup(dev); - stop_activity(dev, driver); - local_irq_enable(); - - driver->unbind(&dev->gadget); - dev->driver = NULL; - - printf("unregistered gadget driver '%s'\n", DRIVER_NAME); - dump_state(dev); - - the_controller = NULL; - - clrbits_le32(CKEN, CKEN11_USB); - - return 0; -} - -extern void udc_disconnect(void) -{ - setbits_le32(CKEN, CKEN11_USB); - udc_clear_mask_UDCCR(UDCCR_UDE); - udc_command(PXA2XX_UDC_CMD_DISCONNECT); - clrbits_le32(CKEN, CKEN11_USB); -} - -/*-------------------------------------------------------------------------*/ - -extern int -usb_gadget_handle_interrupts(int index) -{ - return pxa25x_udc_irq(); -} diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h deleted file mode 100644 index 7c3882aa1e0..00000000000 --- a/drivers/usb/gadget/pxa25x_udc.h +++ /dev/null @@ -1,149 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Intel PXA25x on-chip full speed USB device controller - * - * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix - * Copyright (C) 2003 David Brownell - * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com> - */ - -#ifndef __LINUX_USB_GADGET_PXA25X_H -#define __LINUX_USB_GADGET_PXA25X_H - -#include <linux/types.h> -#include <asm/arch/regs-usb.h> - -/* - * Prefetching support - only ARMv5. - */ - -#ifdef ARCH_HAS_PREFETCH -static inline void prefetch(const void *ptr) -{ - __asm__ __volatile__( - "pld\t%a0" - : - : "p" (ptr) - : "cc"); -} - -#define prefetchw(ptr) prefetch(ptr) -#endif /* ARCH_HAS_PREFETCH */ - -/*-------------------------------------------------------------------------*/ - -#define UDC_REGS ((struct pxa25x_udc_regs *)PXA25X_UDC_BASE) - -/*-------------------------------------------------------------------------*/ - -struct pxa2xx_udc_mach_info { - int (*udc_is_connected)(void); /* do we see host? */ - void (*udc_command)(int cmd); -#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ -#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ -}; - -struct pxa25x_udc; - -struct pxa25x_ep { - struct usb_ep ep; - struct pxa25x_udc *dev; - - const struct usb_endpoint_descriptor *desc; - struct list_head queue; - unsigned long pio_irqs; - - unsigned short fifo_size; - u8 bEndpointAddress; - u8 bmAttributes; - - unsigned stopped:1; - - /* UDCCS = UDC Control/Status for this EP - * UBCR = UDC Byte Count Remaining (contents of OUT fifo) - * UDDR = UDC Endpoint Data Register (the fifo) - * DRCM = DMA Request Channel Map - */ - u32 *reg_udccs; - u32 *reg_ubcr; - u32 *reg_uddr; -}; - -struct pxa25x_request { - struct usb_request req; - struct list_head queue; -}; - -enum ep0_state { - EP0_IDLE, - EP0_IN_DATA_PHASE, - EP0_OUT_DATA_PHASE, - EP0_END_XFER, - EP0_STALL, -}; - -#define EP0_FIFO_SIZE 16U -#define BULK_FIFO_SIZE 64U -#define ISO_FIFO_SIZE 256U -#define INT_FIFO_SIZE 8U - -struct udc_stats { - struct ep0stats { - unsigned long ops; - unsigned long bytes; - } read, write; - unsigned long irqs; -}; - -#ifdef CONFIG_USB_PXA25X_SMALL -/* when memory's tight, SMALL config saves code+data. */ -#define PXA_UDC_NUM_ENDPOINTS 3 -#endif - -#ifndef PXA_UDC_NUM_ENDPOINTS -#define PXA_UDC_NUM_ENDPOINTS 16 -#endif - -struct pxa25x_watchdog { - unsigned running:1; - ulong period; - ulong base; - struct pxa25x_udc *udc; - - void (*function)(struct pxa25x_udc *udc); -}; - -struct pxa25x_udc { - struct usb_gadget gadget; - struct usb_gadget_driver *driver; - struct pxa25x_udc_regs *regs; - - enum ep0_state ep0state; - struct udc_stats stats; - unsigned got_irq:1, - pullup:1, - has_cfr:1, - req_pending:1, - req_std:1, - req_config:1, - active:1; - - struct clk *clk; - struct pxa2xx_udc_mach_info *mach; - u64 dma_mask; - struct pxa25x_ep ep[PXA_UDC_NUM_ENDPOINTS]; - - struct pxa25x_watchdog watchdog; -}; - -/*-------------------------------------------------------------------------*/ - -static struct pxa25x_udc *the_controller; - -/*-------------------------------------------------------------------------*/ - -#ifndef DEBUG -# define NOISY 0 -#endif - -#endif /* __LINUX_USB_GADGET_PXA25X_H */ diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index 167d44e400f..17c76bcf3db 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -9,41 +9,16 @@ #ifndef __CONFIG_FALLBACKS_H #define __CONFIG_FALLBACKS_H -#ifdef CONFIG_SPL #ifdef CONFIG_SPL_PAD_TO #ifdef CONFIG_SPL_MAX_SIZE #if CONFIG_SPL_PAD_TO && CONFIG_SPL_PAD_TO < CONFIG_SPL_MAX_SIZE #error CONFIG_SPL_PAD_TO < CONFIG_SPL_MAX_SIZE #endif #endif -#else -#ifdef CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE -#else -#define CONFIG_SPL_PAD_TO 0 -#endif -#endif #endif #ifndef CONFIG_SYS_BAUDRATE_TABLE #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #endif -/* Console I/O Buffer Size */ -#ifndef CONFIG_SYS_CBSIZE -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 -#else -#define CONFIG_SYS_CBSIZE 256 -#endif -#endif - -#ifndef CONFIG_SYS_PBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#endif - -#ifndef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 16 -#endif - #endif /* __CONFIG_FALLBACKS_H */ diff --git a/include/configs/3c120_devboard.h b/include/configs/3c120_devboard.h index 9db0f0efb15..2d52dc6f660 100644 --- a/include/configs/3c120_devboard.h +++ b/include/configs/3c120_devboard.h @@ -19,7 +19,6 @@ /* * CFI Flash */ -#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 275fb5665fd..fec73ba3426 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -65,8 +65,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* * Start addresses for the final memory configuration @@ -83,8 +81,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is @@ -96,7 +92,6 @@ /* FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT # define CONFIG_SYS_MAX_FLASH_SECT 254 /* max number of sectors on one chip */ #endif diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 13743dab52d..ea89b03c66e 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -75,8 +75,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x21 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE - 0x10) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -88,8 +86,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is @@ -104,11 +100,6 @@ */ #ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ -#ifdef CONFIG_NORFLASH_PS32BIT -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT -#else -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#endif # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ #endif diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index f68eb979bdd..1889a235a2a 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -44,8 +44,6 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define LDS_BOARD_TEXT \ . = DEFINED(env_offset) ? env_offset : .; \ @@ -65,7 +63,6 @@ #endif #define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 /* * For booting Linux, the board info and command line data @@ -80,7 +77,6 @@ #ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ # define CONFIG_SYS_FLASH_CHECKSUM # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 079675be5bc..4c1348c79dc 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -79,8 +79,6 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* * Start addresses for the final memory configuration @@ -91,7 +89,6 @@ #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ #define CONFIG_SYS_MONITOR_LEN 0x40000 -#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024) /* * For booting Linux, the board info and command line data @@ -116,7 +113,6 @@ * 0x30 is block erase in SST */ # define CONFIG_SYS_FLASH_SIZE 0x800000 -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT # define CONFIG_FLASH_CFI_LEGACY #else # define CONFIG_SYS_SST_SECT 2048 diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index b8918680c14..4a2b37653e0 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -76,8 +76,6 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -89,7 +87,6 @@ #define CONFIG_SYS_FLASH_BASE 0xffe00000 #define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 /* * For booting Linux, the board info and command line data @@ -103,7 +100,6 @@ */ #ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ #endif diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 68e3c89a1cd..5e6d0856246 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -78,8 +78,6 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -91,7 +89,6 @@ #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE #define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 /* * For booting Linux, the board info and command line data diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index b6e569d8202..bb6fbac6876 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -77,8 +77,6 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -92,7 +90,6 @@ #define CONFIG_SYS_INT_FLASH_ENABLE 0x21 #define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 /* * For booting Linux, the board info and command line data @@ -107,7 +104,6 @@ #ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ # define CONFIG_SYS_FLASH_CHECKSUM # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 34b5ceb20c4..b38260ed09a 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -79,8 +79,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x20000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* * Start addresses for the final memory configuration @@ -97,8 +95,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is @@ -113,7 +109,6 @@ #ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_FLASH_SPANSION_S29WS_N 1 # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ #endif diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 673b0dc2e8d..c65f26cc091 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -75,8 +75,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -93,8 +91,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is @@ -108,7 +104,6 @@ */ #ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ #endif diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 4c9fc43fd6c..7e45d358797 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -77,8 +77,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -95,8 +93,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is @@ -110,7 +106,6 @@ */ #ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ #endif diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index eb4ccb17eaa..d356ff95944 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -141,8 +141,6 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * FLASH on the Local Bus diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 244f811ff65..d8ffa2e28a9 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -244,8 +244,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 0c19b92940e..ce63e640d5c 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -16,18 +16,11 @@ #include <asm/config_mpc85xx.h> #ifdef CONFIG_SDCARD -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_PAD_TO 0x18000 -#define CONFIG_SPL_MAX_SIZE (96 * 1024) #define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_COMMON_INIT_DDR -#endif #endif #ifdef CONFIG_SPIFLASH @@ -35,49 +28,26 @@ #define CONFIG_RAMBOOT_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #else -#define CONFIG_SPL_SPI_FLASH_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_PAD_TO 0x18000 -#define CONFIG_SPL_MAX_SIZE (96 * 1024) #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_COMMON_INIT_DDR -#endif #endif #endif #ifdef CONFIG_MTD_RAW_NAND #ifdef CONFIG_NXP_ESBC -#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" - -#define CONFIG_SPL_MAX_SIZE 8192 -#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 -#define CONFIG_SPL_RELOC_STACK 0x00100000 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #else #ifdef CONFIG_TPL_BUILD -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_NAND_INIT -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SPL_MAX_SIZE (128 << 10) #define CONFIG_SYS_MPC85XX_NO_RESETVEC #define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) #elif defined(CONFIG_SPL_BUILD) -#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_NAND_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_MAX_SIZE 8192 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000 #define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000 @@ -86,9 +56,6 @@ #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif #endif -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_TPL_PAD_TO 0x20000 -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #endif #endif @@ -206,11 +173,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_CCSRBAR 0xffe00000 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -/* Don't relocate CCSRBAR while in NAND_SPL */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif - /* * Memory map * @@ -409,9 +371,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (768 * 1024) @@ -424,29 +384,17 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR #define CONFIG_SYS_L2_SIZE (256 << 10) #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 -#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (128 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024) #elif defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_TPL_BUILD #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR #define CONFIG_SYS_L2_SIZE (256 << 10) #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 -#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) #else #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR #define CONFIG_SYS_L2_SIZE (256 << 10) #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) -#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) #endif #endif #endif @@ -456,7 +404,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) +#if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL) #define CONFIG_NS16550_MIN_FUNCTIONS #endif diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 3d9e3e1c78b..9cce6cf68da 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -196,9 +196,7 @@ #endif #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (768 * 1024) diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index e7cc39e78a9..618b8ed845a 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -21,16 +21,8 @@ #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS #ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_PAD_TO 0x40000 -#define CONFIG_SPL_MAX_SIZE 0x28000 #define RESET_VECTOR_OFFSET 0x27FFC #define BOOT_PAGE_OFFSET 0x27000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_SKIP_RELOCATE -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) @@ -43,7 +35,6 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) @@ -127,11 +118,7 @@ */ #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 #define CONFIG_SYS_L3_SIZE (256 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) #define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) -#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_DCSRBAR 0xf0000000 @@ -337,9 +324,7 @@ #endif #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (768 * 1024) diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index de31f695c60..3f4e59fa8ab 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -15,14 +15,6 @@ #include <asm/config_mpc85xx.h> #ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_PAD_TO 0x40000 -#define CONFIG_SPL_MAX_SIZE 0x28000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_SKIP_RELOCATE -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif #define RESET_VECTOR_OFFSET 0x27FFC #define BOOT_PAGE_OFFSET 0x27000 @@ -47,7 +39,6 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) @@ -114,11 +105,7 @@ */ #define CONFIG_SYS_INIT_L3_VADDR 0xFFFC0000 #define CONFIG_SYS_L3_SIZE 256 << 10 -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024) #define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) -#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) #define CONFIG_SYS_DCSRBAR 0xf0000000 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull @@ -315,9 +302,7 @@ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (768 * 1024) diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 82e0fc46c7b..b4a91eacb9e 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -29,16 +29,8 @@ #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS #ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_PAD_TO 0x40000 -#define CONFIG_SPL_MAX_SIZE 0x28000 #define RESET_VECTOR_OFFSET 0x27FFC #define BOOT_PAGE_OFFSET 0x27000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_SKIP_RELOCATE -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) @@ -51,7 +43,6 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) @@ -100,11 +91,7 @@ */ #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 #define CONFIG_SYS_L3_SIZE (512 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) #define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) -#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) #define CONFIG_SYS_DCSRBAR 0xf0000000 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull @@ -310,9 +297,7 @@ ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (768 * 1024) /* diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 94385443253..84e5d5df38d 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -24,16 +24,8 @@ #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS #ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_PAD_TO 0x40000 -#define CONFIG_SPL_MAX_SIZE 0x28000 #define RESET_VECTOR_OFFSET 0x27FFC #define BOOT_PAGE_OFFSET 0x27000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_SKIP_RELOCATE -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) @@ -46,7 +38,6 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) @@ -95,11 +86,7 @@ */ #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 #define CONFIG_SYS_L3_SIZE (512 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) #define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) -#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) #define CONFIG_SYS_DCSRBAR 0xf0000000 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull @@ -269,9 +256,7 @@ ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (768 * 1024) /* diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 834855c336c..2ab1b647a86 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -22,9 +22,6 @@ #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #else -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_PAD_TO 0x40000 -#define CONFIG_SPL_MAX_SIZE 0x28000 #define RESET_VECTOR_OFFSET 0x27FFC #define BOOT_PAGE_OFFSET 0x27000 @@ -39,12 +36,6 @@ #endif #endif -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_SKIP_RELOCATE -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif - #endif #endif /* CONFIG_RAMBOOT_PBL */ @@ -76,11 +67,7 @@ */ #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 #define CONFIG_SYS_L3_SIZE (512 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) #define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) -#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) #define CONFIG_SYS_DCSRBAR 0xf0000000 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull @@ -112,9 +99,7 @@ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (768 * 1024) diff --git a/include/configs/alt.h b/include/configs/alt.h index 090bee7d2d6..fe303fda78a 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -11,10 +11,9 @@ #include "rcar-gen2-common.h" -#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 #define STACK_AREA_SIZE 0x00100000 #define LOW_LEVEL_MERAM_STACK \ - (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + (SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) /* MEMORY */ #define RCAR_GEN2_SDRAM_BASE 0x40000000 @@ -38,8 +37,4 @@ "bootm_size=0x10000000\0" \ "usb_pgood_delay=2000\0" -/* SPL support */ -#define CONFIG_SPL_STACK 0xe6340000 -#define CONFIG_SPL_MAX_SIZE 0x4000 - #endif /* __ALT_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index fd5b209a52d..3e98e5c6653 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -193,10 +193,6 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 -/* NAND: SPL related configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#endif #endif /* !CONFIG_MTD_RAW_NAND */ /* USB Device Firmware Update support */ @@ -241,7 +237,6 @@ #if defined(CONFIG_NOR) #define CONFIG_SYS_MAX_FLASH_SECT 128 #define CONFIG_SYS_FLASH_BASE (0x08000000) -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_SIZE 0x01000000 #endif /* NOR support */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index b872ade1443..b896f962f08 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -28,7 +28,6 @@ #define CONFIG_SYS_NAND_MAX_OOBFREE 2 #define CONFIG_SYS_NAND_MAX_ECCPOS 56 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000 /* NAND block size is 128 KiB. Synchronize these values with * corresponding Device Tree entries in Linux: * MLO(SPL) 4 * NAND_BLOCK_SIZE = 512 KiB @ 0x000000 @@ -86,15 +85,6 @@ /* Miscellaneous configurable options */ -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 64 - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* memtest works on */ /* Physical Memory Map */ @@ -113,8 +103,4 @@ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -/* Defines for SPL */ - -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - #endif /* __CONFIG_H */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 5057441f750..665ace5b01b 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -27,8 +27,6 @@ #define CONFIG_POWER_TPS62362 /* SPL defines. */ -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ - (128 << 20)) /* Enabling L2 Cache */ #define CONFIG_SYS_L2_PL310 @@ -153,11 +151,6 @@ } #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 26 -/* NAND: SPL related configs */ -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */ -#endif #define NANDARGS \ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h index d84a8db97ed..6da11b86c4b 100644 --- a/include/configs/am64x_evm.h +++ b/include/configs/am64x_evm.h @@ -18,37 +18,6 @@ /* DDR Configuration */ #define CONFIG_SYS_SDRAM_BASE1 0x880000000 -#ifdef CONFIG_SYS_K3_SPL_ATF -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin" -#endif - -#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE -#if defined(CONFIG_TARGET_AM642_A53_EVM) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + SZ_4M) -#else -/* - * Maximum size in memory allocated to the SPL BSS. Keep it as tight as - * possible (to allow the build to go through), as this directly affects - * our memory footprint. The less we use for BSS the more we have available - * for everything else. - */ -#define CONFIG_SPL_BSS_MAX_SIZE 0x4000 -/* - * Link BSS to be within SPL in a dedicated region located near the top of - * the MCU SRAM, this way making it available also before relocation. Note - * that we are not using the actual top of the MCU SRAM as there is a memory - * location filled in by the boot ROM that we want to read out without any - * interference from the C context. - */ -#define CONFIG_SPL_BSS_START_ADDR (TI_SRAM_SCRATCH_BOARD_EEPROM_START -\ - CONFIG_SPL_BSS_MAX_SIZE) -/* Set the stack right below the SPL BSS section */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_BSS_START_ADDR -/* Configure R5 SPL post-relocation malloc pool in DDR */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84000000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M -#endif - #define PARTS_DEFAULT \ /* Linux partitions */ \ "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h index b1f9050f3f5..db35af98d9a 100644 --- a/include/configs/am65x_evm.h +++ b/include/configs/am65x_evm.h @@ -17,39 +17,6 @@ /* DDR Configuration */ #define CONFIG_SYS_SDRAM_BASE1 0x880000000 -/* SPL Loader Configuration */ -#ifdef CONFIG_TARGET_AM654_A53_EVM -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + SZ_4M) -#else -/* - * Maximum size in memory allocated to the SPL BSS. Keep it as tight as - * possible (to allow the build to go through), as this directly affects - * our memory footprint. The less we use for BSS the more we have available - * for everything else. - */ -#define CONFIG_SPL_BSS_MAX_SIZE 0xc00 -/* - * Link BSS to be within SPL in a dedicated region located near the top of - * the MCU SRAM, this way making it available also before relocation. Note - * that we are not using the actual top of the MCU SRAM as there is a memory - * location filled in by the boot ROM that we want to read out without any - * interference from the C context. - */ -#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\ - CONFIG_SPL_BSS_MAX_SIZE) -/* Set the stack right below the SPL BSS section */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_BSS_START_ADDR -/* Configure R5 SPL post-relocation malloc pool in DDR */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84000000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M -#endif - -#ifdef CONFIG_SYS_K3_SPL_ATF -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin" -#endif - -#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE - #define CONFIG_SYS_BOOTM_LEN SZ_64M #define PARTS_DEFAULT \ diff --git a/include/configs/amcore.h b/include/configs/amcore.h index 898978eb96a..3c9267b14ec 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -32,9 +32,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 /* size of internal SRAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_SIZE 0x1000000 @@ -46,7 +43,6 @@ #define CONFIG_SYS_WRITE_SWAPPED_DATA /* reserve 128-4KB */ #define CONFIG_SYS_MONITOR_LEN ((128 - 4) * 1024) -#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) #define LDS_BOARD_TEXT \ . = DEFINED(env_offset) ? env_offset : .; \ diff --git a/include/configs/ap121.h b/include/configs/ap121.h index e1c2e066131..099aac54219 100644 --- a/include/configs/ap121.h +++ b/include/configs/ap121.h @@ -9,14 +9,10 @@ #define CONFIG_SYS_MHZ 200 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1) /* Miscellaneous configurable options */ diff --git a/include/configs/ap143.h b/include/configs/ap143.h index 37fc196514f..60b9e779fa9 100644 --- a/include/configs/ap143.h +++ b/include/configs/ap143.h @@ -9,14 +9,10 @@ #define CONFIG_SYS_MHZ 325 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1) /* * Serial Port diff --git a/include/configs/ap152.h b/include/configs/ap152.h index 9f476333710..d165ead7bb4 100644 --- a/include/configs/ap152.h +++ b/include/configs/ap152.h @@ -9,14 +9,10 @@ #define CONFIG_SYS_MHZ 375 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1) /* * Serial Port diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h index c8422264b75..4a3e51d19ef 100644 --- a/include/configs/apalis-imx8.h +++ b/include/configs/apalis-imx8.h @@ -60,8 +60,6 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 - /* On Apalis iMX8 USDHC1 is eMMC, USDHC2 is 8-bit and USDHC3 is 4-bit MMC/SD */ #define CONFIG_SYS_FSL_USDHC_NUM 3 @@ -73,11 +71,4 @@ #define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ #define PHYS_SDRAM_2_SIZE SZ_2G /* 2 GB */ -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE SZ_2K -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - #endif /* __APALIS_IMX8_H */ diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index face78e1dd4..19e6a1e04ee 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -89,18 +89,6 @@ "source ${loadaddr}\0" \ "vidargs=fbcon=map:1\0" -/* Increase console I/O buffer size */ -#undef CONFIG_SYS_CBSIZE -#define CONFIG_SYS_CBSIZE 1024 - -/* Increase arguments buffer size */ -#undef CONFIG_SYS_BARGSIZE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* Increase maximum number of arguments */ -#undef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 32 - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index aa93d10f852..28644051471 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -119,10 +119,6 @@ "vidargs=mxc_hdmi.only_cea=1 fbmem=32M\0" /* Miscellaneous configurable options */ -#undef CONFIG_SYS_CBSIZE -#define CONFIG_SYS_CBSIZE 1024 -#undef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 48 /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -131,9 +127,4 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #endif /* __CONFIG_H */ diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h index d1d518a5340..104c4135e28 100644 --- a/include/configs/apalis_t30.h +++ b/include/configs/apalis_t30.h @@ -26,18 +26,6 @@ /* PCI networking support */ #define CONFIG_E1000_NO_NVM -/* Increase console I/O buffer size */ -#undef CONFIG_SYS_CBSIZE -#define CONFIG_SYS_CBSIZE 1024 - -/* Increase arguments buffer size */ -#undef CONFIG_SYS_BARGSIZE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* Increase maximum number of arguments */ -#undef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 32 - #define UBOOT_UPDATE \ "uboot_hwpart=1\0" \ "uboot_blk=0\0" \ diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index 8ee97f1d4e3..026775de7c5 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -417,11 +417,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #define CONFIG_SYS_FSL_USDHC_NUM 2 /* DMA stuff, needed for GPMI/MXS NAND support */ diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index acd140ee35e..1c7494183a4 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -20,16 +20,14 @@ #define CONFIG_SYS_TIMER_RATE (get_board_sys_clk() / 4) /* STACK */ -#define CONFIG_SYS_INIT_SP_ADDR 0xE8083000 #define STACK_AREA_SIZE 0xC000 #define LOW_LEVEL_MERAM_STACK \ - (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + (SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) /* MEMORY */ #define ARMADILLO_800EVA_SDRAM_BASE 0x40000000 #define ARMADILLO_800EVA_SDRAM_SIZE (512 * 1024 * 1024) -#define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ @@ -48,7 +46,6 @@ #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* FLASH */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_BASE 0x00000000 #define CONFIG_SYS_MAX_FLASH_SECT 512 #define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) } diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 5109f7de534..5ebba0cda20 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -18,9 +18,6 @@ #define CONFIG_EXYNOS_SPL /* Miscellaneous configurable options */ -#define CONFIG_IRAM_STACK 0x02050000 - -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK #define CONFIG_S5P_PA_SYSRAM 0x02020000 #define CONFIG_SMP_PEN_ADDR CONFIG_S5P_PA_SYSRAM diff --git a/include/configs/aspeed-common.h b/include/configs/aspeed-common.h index 0954bc02aa2..5c9005805e1 100644 --- a/include/configs/aspeed-common.h +++ b/include/configs/aspeed-common.h @@ -24,11 +24,6 @@ #define CONFIG_SYS_INIT_RAM_SIZE (ASPEED_SRAM_SIZE) #endif -#define SYS_INIT_RAM_END (CONFIG_SYS_INIT_RAM_ADDR \ - + CONFIG_SYS_INIT_RAM_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (SYS_INIT_RAM_END \ - - GENERATED_GBL_DATA_SIZE) - /* * NS16550 Configuration */ diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 9d1203f3978..9bf6968e8ad 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -162,9 +162,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* * Start addresses for the final memory configuration @@ -204,8 +201,6 @@ /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index f5cc0b2b912..2c4f229d347 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -34,17 +34,11 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 -/* - * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, - * leaving the correct space for initial global data structure above - * that address while providing maximum stack area below. - */ +#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024) #ifdef CONFIG_AT91SAM9XE -# define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE) +# define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM #else -# define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) +# define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 #endif /* NAND flash */ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 2089fe52e45..563fff531d1 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -26,8 +26,8 @@ /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024) +#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM /* NAND flash */ #ifdef CONFIG_CMD_NAND diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index b63cd4bb839..c100a411b2d 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -33,8 +33,8 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024) +#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 /* NOR flash, if populated */ #ifdef CONFIG_SYS_USE_NORFLASH diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 38b9061080a..b55d2e39255 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -23,9 +23,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x70000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) - /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -40,23 +37,10 @@ #endif -/* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE 0x010000 -#define CONFIG_SPL_STACK 0x310000 - #define CONFIG_SYS_MONITOR_LEN 0x80000 #ifdef CONFIG_SD_BOOT - -#define CONFIG_SPL_BSS_START_ADDR 0x70000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 -#define CONFIG_SYS_SPL_MALLOC_START 0x70080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 - -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - #elif CONFIG_NAND_BOOT -#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 #define CONFIG_SYS_NAND_ECCSIZE 256 diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 7d378177b04..abcddc3cc9d 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -22,14 +22,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 -/* - * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, - * leaving the correct space for initial global data structure above - * that address while providing maximum stack area below. - */ -# define CONFIG_SYS_INIT_SP_ADDR \ - (0x00300000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) - /* DataFlash */ /* NAND flash */ @@ -60,13 +52,6 @@ #endif /* SPL */ -#define CONFIG_SPL_MAX_SIZE 0x6000 -#define CONFIG_SPL_STACK 0x308000 - -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN (512 << 10) @@ -75,8 +60,4 @@ #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 -#ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif - #endif diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index e0aeae88d14..e3350282bcf 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -29,8 +29,8 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024) +#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM /* NAND flash */ #ifdef CONFIG_CMD_NAND diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 013c7cfc59c..6857f2e3c4a 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -23,9 +23,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 megs */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) - /* DataFlash */ /* NAND flash */ @@ -55,13 +52,6 @@ #endif /* SPL */ -#define CONFIG_SPL_MAX_SIZE 0x6000 -#define CONFIG_SPL_STACK 0x308000 - -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN (512 << 10) @@ -70,8 +60,4 @@ #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 -#ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif - #endif diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h index ba314026ce9..754e9096194 100644 --- a/include/configs/ax25-ae350.h +++ b/include/configs/ax25-ae350.h @@ -7,16 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#ifdef CONFIG_SPL -#define CONFIG_SPL_MAX_SIZE 0x00100000 -#define CONFIG_SPL_BSS_START_ADDR 0x04000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 - -#ifdef CONFIG_SPL_MMC -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb" -#endif -#endif - #define RISCV_MMODE_TIMERBASE 0xe6000000 #define RISCV_MMODE_TIMER_FREQ 60000000 @@ -29,26 +19,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* - * Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -/* - * max number of command args - */ -#define CONFIG_SYS_MAXARGS 16 - -/* - * Boot Argument Buffer Size - */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* DT blob (fdt) address */ -#define CONFIG_SYS_FDT_BASE 0x800f0000 /* * Physical Memory Map @@ -70,13 +40,6 @@ #define CONFIG_SYS_NS16550_CLK 19660800 /* Init Stack Pointer */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000000 - \ - GENERATED_GBL_DATA_SIZE) - -/* use CFI framework */ - -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* support JEDEC */ #define PHYS_FLASH_1 0x88000000 /* BANK 0 */ diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h index cb400be77a6..7e25846e401 100644 --- a/include/configs/axs10x.h +++ b/include/configs/axs10x.h @@ -23,9 +23,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_SDRAM_SIZE SZ_512M -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - #define CONFIG_SYS_BOOTM_LEN SZ_128M /* diff --git a/include/configs/bcm_ns3.h b/include/configs/bcm_ns3.h index 81b4218c888..97e1a88f270 100644 --- a/include/configs/bcm_ns3.h +++ b/include/configs/bcm_ns3.h @@ -23,18 +23,11 @@ * Just before re-loaction, new SP is updated and re-location happens. * So pointing the initial SP to end of 2GB DDR is not a problem */ -#define CONFIG_SYS_INIT_SP_ADDR (PHYS_SDRAM_1 + 0x80000000) /* 12MB Malloc size */ /* console configuration */ #define CONFIG_SYS_NS16550_CLK 25000000 -#define CONFIG_SYS_CBSIZE SZ_1K -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* * Increase max uncompressed/gunzip size, keeping size same as EMMC linux * partition. diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h index 98c815961c0..ed78b732121 100644 --- a/include/configs/bcmstb.h +++ b/include/configs/bcmstb.h @@ -83,15 +83,10 @@ extern phys_addr_t prior_stage_fdt_address; */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) /* * CONFIG_SYS_LOAD_ADDR - 1 MiB. */ -#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 32 /* * Large kernel image bootm configuration. diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h index bd07b4b031b..2069d51d2fd 100644 --- a/include/configs/bk4r1.h +++ b/include/configs/bk4r1.h @@ -213,9 +213,4 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #endif /* __CONFIG_H */ diff --git a/include/configs/blanche.h b/include/configs/blanche.h index 4f8da594043..25b6e7005e7 100644 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -12,10 +12,9 @@ #include "rcar-gen2-common.h" /* STACK */ -#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 #define STACK_AREA_SIZE 0x00100000 #define LOW_LEVEL_MERAM_STACK \ - (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + (SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) /* MEMORY */ #define RCAR_GEN2_SDRAM_BASE 0x40000000 @@ -28,7 +27,6 @@ #if !defined(CONFIG_MTD_NOR_FLASH) #define CONFIG_SH_QSPI_BASE 0xE6B10000 #else -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_BASE 0x00000000 #define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */ diff --git a/include/configs/bmips_common.h b/include/configs/bmips_common.h index 899a538082e..7e358a6314b 100644 --- a/include/configs/bmips_common.h +++ b/include/configs/bmips_common.h @@ -12,9 +12,4 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 500000, 1500000 } -/* Memory usage */ -#define CONFIG_SYS_MAXARGS 24 -#define CONFIG_SYS_BOOTPARAMS_LEN SZ_128K -#define CONFIG_SYS_CBSIZE SZ_512 - #endif /* __CONFIG_BMIPS_COMMON_H */ diff --git a/include/configs/broadcom_bcm963158.h b/include/configs/broadcom_bcm963158.h index 5aa784d88ca..493114836c8 100644 --- a/include/configs/broadcom_bcm963158.h +++ b/include/configs/broadcom_bcm963158.h @@ -13,7 +13,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 500000, 1500000 } /* Memory usage */ -#define CONFIG_SYS_MAXARGS 24 #define CONFIG_SYS_BOOTM_LEN (16 * 1024 * 1024) /* @@ -24,7 +23,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* U-Boot */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M) #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/broadcom_bcm96753ref.h b/include/configs/broadcom_bcm96753ref.h index c002985cf45..33c70c73c1f 100644 --- a/include/configs/broadcom_bcm96753ref.h +++ b/include/configs/broadcom_bcm96753ref.h @@ -13,7 +13,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 500000, 1500000 } /* Memory usage */ -#define CONFIG_SYS_MAXARGS 24 /* * 6853 @@ -23,7 +22,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* U-Boot */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M) #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/broadcom_bcm968360bg.h b/include/configs/broadcom_bcm968360bg.h index 01bab046ddb..8a802357123 100644 --- a/include/configs/broadcom_bcm968360bg.h +++ b/include/configs/broadcom_bcm968360bg.h @@ -13,7 +13,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 500000, 1500000 } /* Memory usage */ -#define CONFIG_SYS_MAXARGS 24 /* * 6858 @@ -23,7 +22,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* U-Boot */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M) #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/broadcom_bcm968580xref.h b/include/configs/broadcom_bcm968580xref.h index ebfc2ecc0be..abc2da3d1fe 100644 --- a/include/configs/broadcom_bcm968580xref.h +++ b/include/configs/broadcom_bcm968580xref.h @@ -13,7 +13,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 500000, 1500000 } /* Memory usage */ -#define CONFIG_SYS_MAXARGS 24 /* * 6858 @@ -23,7 +22,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* U-Boot */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M) #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 769b3f073ac..12a4048a511 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -29,16 +29,8 @@ */ #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000 - /* RAW SD card / eMMC */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ -/* NAND */ -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000 -#endif /* CONFIG_MTD_RAW_NAND */ #endif /* CONFIG_SPL_OS_BOOT */ #ifdef CONFIG_MTD_RAW_NAND diff --git a/include/configs/brppt2.h b/include/configs/brppt2.h index 92f69ba9b0f..7b110f05ca4 100644 --- a/include/configs/brppt2.h +++ b/include/configs/brppt2.h @@ -81,10 +81,6 @@ BUR_COMMON_ENV \ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* Ethernet */ #define CONFIG_FEC_FIXED_SPEED _1000BASET diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 5fc8ce622b1..a6de28a42b2 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -24,7 +24,6 @@ #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ /* Timer information */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #include <asm/arch/omap.h> @@ -37,8 +36,6 @@ * Y-MODEM to load u-boot.img, when booted over UART. We must also include * the scratch space that U-Boot uses in SRAM. */ -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) /* * Since SPL did pll and ddr initialization for us, @@ -51,8 +48,6 @@ * and we place the initial stack pointer in our SRAM. */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) /* * Our platforms make use of SPL to initalize the hardware (primarily @@ -73,11 +68,6 @@ * * ---------------------------------------------------------------------------- */ -#define CONFIG_SPL_BSS_START_ADDR 0x80A00000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN /* General parts of the framework, required. */ diff --git a/include/configs/bur_cfg_common.h b/include/configs/bur_cfg_common.h index 69850117637..304abc6d2e2 100644 --- a/include/configs/bur_cfg_common.h +++ b/include/configs/bur_cfg_common.h @@ -27,10 +27,4 @@ /* As stated above, the following choices are optional. */ -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 64 - -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 512 - #endif /* __BUR_CFG_COMMON_H__ */ diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 364bd50b591..933fcfcfd28 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -15,14 +15,8 @@ /* SPL config */ #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SPL_STACK 0x013E000 -#define CONFIG_SPL_BSS_START_ADDR 0x00128000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x00120000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ #define CONFIG_MALLOC_F_ADDR 0x00120000 #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE @@ -106,7 +100,6 @@ ENV_NET /* Default location for tftp and bootm */ -#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 /* On CCP board, USDHC1 is for eMMC */ @@ -117,11 +110,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1 GB */ #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */ -/* Console buffer and boot args */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - #define BOOTAUX_RESERVED_MEM_BASE 0x88000000 #define BOOTAUX_RESERVED_MEM_SIZE SZ_128M /* Reserve from second 128MB */ diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index 4c04bbf6447..0266d6988ce 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -12,14 +12,8 @@ #include <asm/arch/imx-regs.h> #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SPL_STACK 0x013E000 -#define CONFIG_SPL_BSS_START_ADDR 0x00128000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x00120000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ #define CONFIG_SERIAL_LPUART_BASE 0x5a060000 #define CONFIG_MALLOC_F_ADDR 0x00120000 @@ -120,8 +114,6 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 - #define CONFIG_SYS_FSL_USDHC_NUM 3 #define CONFIG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/chromebook_link.h b/include/configs/chromebook_link.h index 96d5cf1a338..0787359674d 100644 --- a/include/configs/chromebook_link.h +++ b/include/configs/chromebook_link.h @@ -15,6 +15,4 @@ #include <configs/x86-common.h> #include <configs/x86-chromebook.h> -#define CONFIG_SPL_BOARD_LOAD_IMAGE - #endif /* __CONFIG_H */ diff --git a/include/configs/ci20.h b/include/configs/ci20.h index cc70a59e728..01f63649053 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -15,7 +15,6 @@ /* Memory configuration */ #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* cached (KSEG0) address */ #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 @@ -28,22 +27,7 @@ #define DM9000_IO CONFIG_DM9000_BASE #define DM9000_DATA (CONFIG_DM9000_BASE + 2) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ -#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* Boot argument buffer size */ - /* Miscellaneous configuration options */ #define CONFIG_SYS_BOOTM_LEN (64 << 20) -/* SPL */ -#define CONFIG_SPL_STACK 0xf4008000 /* only max. 2KB spare! */ - -#define CONFIG_SPL_MAX_SIZE ((14 * 1024) - 0xa00) - -#define CONFIG_SPL_BSS_START_ADDR 0xf4004000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00002000 /* 512KB, arbitrary */ - -#define CONFIG_SPL_START_S_PATH "arch/mips/mach-jz47xx" - #endif /* __CONFIG_CI20_H__ */ diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h index 4b494d8aeef..b19b3ef541c 100644 --- a/include/configs/cl-som-imx7.h +++ b/include/configs/cl-som-imx7.h @@ -90,11 +90,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* SPI Flash support */ /* FLASH and environment organization */ diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 871e87c26d0..8497fe28eff 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -40,29 +40,6 @@ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" -/* SPL */ - -/* Defines for SPL */ -#define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - (CONFIG_SPL_TEXT_BASE - 0x40000000)) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - -#if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC) || defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA) -/* SPL related MMC defines */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ -#endif -#endif - /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 600999b8e72..cb4cd925d9f 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -24,10 +24,6 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* Serial console */ #define CONFIG_MXC_UART_BASE UART4_BASE diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index ad2e8818907..b3ccc3cac3d 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -86,9 +86,6 @@ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x500000 -#endif /* GPIO pin + bank to pin ID mapping */ #define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin) diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index eb015e1b20f..ec1355b8a32 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -76,7 +76,6 @@ "bootz ${loadaddr} - ${fdtaddr}\0" /* SPL defines. */ -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* EEPROM */ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 1822ce5120a..c926e6ac8ca 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -165,8 +165,6 @@ enter a valid image address in flash */ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -190,7 +188,6 @@ enter a valid image address in flash */ #define CONFIG_SYS_FLASH_BASE 0xffe00000 #define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 /* * For booting Linux, the board info and command line data diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index 9e5212acb2e..0459cb0286e 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -122,11 +122,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ #if defined(CONFIG_ENV_IS_IN_NAND) #define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SIZE) diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index 3ed89c2776c..fb7de896b75 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -91,8 +91,6 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 - /* Environment in eMMC, before config block at the end of 1st "boot sector" */ /* On Colibri iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */ @@ -106,13 +104,6 @@ #define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */ -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE SZ_2K -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - /* Generic Timer Definitions */ #define BOOTAUX_RESERVED_MEM_BASE 0x88000000 diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 9ca6bef192f..d7d5c2ddee1 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -106,10 +106,6 @@ "vidargs=fbmem=8M\0" /* Miscellaneous configurable options */ -#undef CONFIG_SYS_CBSIZE -#define CONFIG_SYS_CBSIZE 1024 -#undef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 48 /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -118,9 +114,4 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #endif /* __CONFIG_H */ diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 3dba7bcef25..180142a6487 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -166,11 +166,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ #if defined(CONFIG_ENV_IS_IN_NAND) #define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SIZE) diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index f6b3ab1b041..1e6561dc281 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -28,18 +28,6 @@ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ UBOOT_UPDATE -/* Increase console I/O buffer size */ -#undef CONFIG_SYS_CBSIZE -#define CONFIG_SYS_CBSIZE 1024 - -/* Increase arguments buffer size */ -#undef CONFIG_SYS_BARGSIZE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* Increase maximum number of arguments */ -#undef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 32 - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index 1ce0def4ddf..c9d384e2bdb 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -24,18 +24,6 @@ #define CONFIG_TEGRA_ENABLE_UARTA #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -/* Increase console I/O buffer size */ -#undef CONFIG_SYS_CBSIZE -#define CONFIG_SYS_CBSIZE 1024 - -/* Increase arguments buffer size */ -#undef CONFIG_SYS_BARGSIZE -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* Increase maximum number of arguments */ -#undef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 32 - #define UBOOT_UPDATE \ "uboot_hwpart=1\0" \ "uboot_blk=0\0" \ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 99b0cbb3420..32e2aabc67c 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -82,8 +82,6 @@ "video-mode=dcufb:640x480-16@60,monitor=lcd\0" /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Physical memory map */ #define PHYS_SDRAM (0x80000000) @@ -93,11 +91,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ #ifdef CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_RANGE (4 * 64 * 2048) diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index b499d7085fd..d1bea54b207 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -22,44 +22,6 @@ #define CONFIG_PCI_SCAN_SHOW #endif -/* SPL */ -/* - * Select the boot device here - * - * Currently supported are: - * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash - * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1) - */ -#define SPL_BOOT_SPI_NOR_FLASH 1 -#define SPL_BOOT_SDIO_MMC_CARD 2 -#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH - -/* Defines for SPL */ -#define CONFIG_SPL_SIZE (160 << 10) - -#if defined(CONFIG_SECURED_MODE_IMAGE) -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x2614) -#else -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x30) -#endif - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((212 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - -#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD -/* SPL related MMC defines */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ -#endif -#endif - /* * Environment Configuration */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 121963fe5ce..9291b81ac2a 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -194,8 +194,7 @@ #endif #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (768 * 1024) diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 4809b59ecc3..698da6b6dac 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -35,9 +35,6 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + SZ_32K - GENERATED_GBL_DATA_SIZE) - /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -57,14 +54,7 @@ /* bootstrap + u-boot + env in nandflash */ /* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE (12 * SZ_1K) -#define CONFIG_SPL_STACK (SZ_16K) - -#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_BSS_MAX_SIZE (SZ_2K) -#define CONFIG_SPL_NAND_RAW_ONLY -#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE @@ -81,7 +71,4 @@ #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 -#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS -#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO - #endif diff --git a/include/configs/crs3xx-98dx3236.h b/include/configs/crs3xx-98dx3236.h index 4dbc7582669..07769c9e0e4 100644 --- a/include/configs/crs3xx-98dx3236.h +++ b/include/configs/crs3xx-98dx3236.h @@ -24,7 +24,5 @@ * to enable certain macros */ #include "mv-common.h" -#undef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 96 #endif /* _CONFIG_CRS3XX_98DX3236_H */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 855711e6290..71ebca587d1 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -32,8 +32,6 @@ #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ -#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE -#define CONFIG_SPL_BSS_MAX_SIZE 0x1080000 /* memtest start addr */ /* memtest will be run on 16MB */ @@ -148,8 +146,6 @@ /* * U-Boot general configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ /* * Linux Information @@ -180,17 +176,8 @@ #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 -#ifndef CONFIG_MTD_NOR_FLASH -#define CONFIG_SPL_PAD_TO 32768 -#endif - #ifdef CONFIG_SPL_BUILD /* defines for SPL */ -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_STACK 0x8001ff00 -#define CONFIG_SPL_MAX_FOOTPRINT 32768 #endif @@ -199,13 +186,6 @@ /* additions for new relocation code, must added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0xc0000000 -#ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_SYS_INIT_SP_ADDR 0x8001ff00 -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ - GENERATED_GBL_DATA_SIZE) -#endif /* CONFIG_MTD_NOR_FLASH */ - #include <asm/arch/hardware.h> #endif /* __CONFIG_H */ diff --git a/include/configs/dart_6ul.h b/include/configs/dart_6ul.h index ad28fa01202..d502e98deae 100644 --- a/include/configs/dart_6ul.h +++ b/include/configs/dart_6ul.h @@ -49,11 +49,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* USB Configs */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h index 16c83a88dac..7357f9800fd 100644 --- a/include/configs/db-88f6720.h +++ b/include/configs/db-88f6720.h @@ -34,16 +34,5 @@ /* SPL */ /* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE ((128 << 10) - (CONFIG_SPL_TEXT_BASE - 0x40000000)) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) #endif /* _CONFIG_DB_88F6720_H */ diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h index 6538e66052a..3c442018ab1 100644 --- a/include/configs/db-88f6820-amc.h +++ b/include/configs/db-88f6820-amc.h @@ -26,39 +26,10 @@ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" -/* SPL */ -/* - * Select the boot device here - * - * Currently supported are: - * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash - * - * MMC is not populated on this board. - * NAND support may be added in the future. - */ -#define SPL_BOOT_SPI_NOR_FLASH 1 -#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH - -/* Defines for SPL */ -#define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - (CONFIG_SPL_TEXT_BASE - 0x40000000)) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros */ #include "mv-common.h" -#undef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 96 #endif /* _CONFIG_DB_88F6820_AMC_H */ diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 8dc73e8b1cc..6b2edbb1e0d 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -27,39 +27,6 @@ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" -/* SPL */ -/* - * Select the boot device here - * - * Currently supported are: - * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash - * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1) - */ -#define SPL_BOOT_SPI_NOR_FLASH 1 -#define SPL_BOOT_SDIO_MMC_CARD 2 -#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH - -/* Defines for SPL */ -#define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - (CONFIG_SPL_TEXT_BASE - 0x40000000)) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - -#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD -/* SPL related MMC defines */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ -#endif -#endif - /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index d6850bd32e7..808debc6f50 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -53,17 +53,6 @@ /* SPL */ /* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE ((128 << 10) - (CONFIG_SPL_TEXT_BASE - 0x40000000)) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ #define CONFIG_SPD_EEPROM 0x4e diff --git a/include/configs/db-xc3-24g4xg.h b/include/configs/db-xc3-24g4xg.h index 1d242bf4e65..84ea1baa997 100644 --- a/include/configs/db-xc3-24g4xg.h +++ b/include/configs/db-xc3-24g4xg.h @@ -20,7 +20,5 @@ * to enable certain macros */ #include "mv-common.h" -#undef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 96 #endif /* _CONFIG_DB_XC3_24G4G_H */ diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index bc5282a4893..15160db276d 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -18,9 +18,6 @@ #define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE #define CONFIG_SYS_SDRAM_SIZE SZ_64M -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \ - - GENERATED_GBL_DATA_SIZE) - /* * DMA */ @@ -64,8 +61,6 @@ /* * U-Boot General Configurations */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* * Pass open firmware flat tree @@ -87,26 +82,6 @@ * U-Boot Commands */ -/* - * SPL specific defines - */ -/* SPL will be executed at offset 0 */ - -/* SPL will use SRAM as stack */ -#define CONFIG_SPL_STACK 0x0000FFF8 - -/* Use the framework and generic lib */ - -/* SPL will use serial */ - -/* SPL loads an image from NAND */ -#define CONFIG_SPL_NAND_RAW_ONLY - -#define CONFIG_SPL_NAND_SOFTECC - -#define CONFIG_SPL_MAX_SIZE 0x20000 -#define CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE - /* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */ #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x60000 diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 5dbd126a2a0..4e91f8caa32 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -23,12 +23,6 @@ * other needs. */ -#define CONFIG_SPL_BSS_START_ADDR 0x80000500 /* leave space for bootargs*/ -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ - /* Physical Memory Map */ #include <configs/ti_omap3_common.h> @@ -111,8 +105,6 @@ "fi; " \ "else run nandboot; fi\0" -/* Boot Argument Buffer Size */ - /* Defines for SPL */ /* NAND boot config */ @@ -124,15 +116,4 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 -/* SPL OS boot options */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 - -#undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR -#undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8 /* address 0x1000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 8 /* 4KB */ - -#undef CONFIG_SYS_SPL_ARGS_ADDR -#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) - #endif /* __CONFIG_H */ diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index 178f5a6e7d6..b495826301e 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -23,7 +23,6 @@ /* SPL */ #include "imx6_spl.h" /* common IMX6 SPL configuration */ -#define CONFIG_SPL_TARGET "u-boot-with-spl.imx" /* Miscellaneous configurable options */ @@ -91,12 +90,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment */ #endif /* __DH_IMX6_CONFIG_H */ diff --git a/include/configs/display5.h b/include/configs/display5.h index 7bd653364d3..c23a57ee7a2 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -10,12 +10,8 @@ #include "mx6_common.h" /* Falcon Mode */ -#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 /* Falcon Mode - MMC support */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x3F00 -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS \ - (CONFIG_CMD_SPL_WRITE_SIZE / 512) /* * display5 SPI-NOR memory layout @@ -284,14 +280,6 @@ "\0" \ /* Miscellaneous configurable options */ -#undef CONFIG_SYS_CBSIZE -#define CONFIG_SYS_CBSIZE 2048 - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_STANDALONE_LOAD_ADDR 0x10001000 @@ -302,11 +290,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* ENV config */ #ifdef CONFIG_ENV_IS_IN_SPI_FLASH /* The 0x120000 value corresponds to above SPI-NOR memory MAP */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index e16af8824b4..9247720f8b6 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -84,18 +84,12 @@ 50, 51, 52, 53, 54, 55, 56, 57, } #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 -/* NAND: SPL related configs */ -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#endif #endif /* !CONFIG_MTD_RAW_NAND */ /* Parallel NOR Support */ #if defined(CONFIG_NOR) /* NOR: device related configs */ #define CONFIG_SYS_MAX_FLASH_SECT 512 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */ #define CONFIG_SYS_FLASH_BASE (0x08000000) /* Reduce SPL size by removing unlikey targets */ diff --git a/include/configs/draak.h b/include/configs/draak.h index 476b4c3710a..a38e4863483 100644 --- a/include/configs/draak.h +++ b/include/configs/draak.h @@ -15,7 +15,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index 14ba52a2eb3..ed46f26628f 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -18,7 +18,6 @@ /* Note: 8 MiB (0x86000000 - 0x86800000) are reserved for tz/smem/hyp/rmtfs/rfsa */ #define PHYS_SDRAM_1_SIZE SZ_1G #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #define CONFIG_SYS_BOOTM_LEN SZ_64M /* UART */ @@ -74,8 +73,4 @@ REFLASH(dragonboard/u-boot.img, 8)\ "pxefile_addr_r=0x90100000\0"\ BOOTENV -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - #endif diff --git a/include/configs/dragonboard820c.h b/include/configs/dragonboard820c.h index 1e2b15b33f9..e3940dc3217 100644 --- a/include/configs/dragonboard820c.h +++ b/include/configs/dragonboard820c.h @@ -20,7 +20,6 @@ #define PHYS_SDRAM_2_SIZE 0x5ea4ffff #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #define CONFIG_SYS_BOOTM_LEN SZ_64M #ifndef CONFIG_SPL_BUILD @@ -43,8 +42,4 @@ "pxefile_addr_r=0x90100000\0"\ BOOTENV -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 64 - #endif diff --git a/include/configs/ds414.h b/include/configs/ds414.h index dbccd46bbdb..7fa1a4ebf02 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -45,17 +45,6 @@ /* SPL */ /* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE ((128 << 10) - (CONFIG_SPL_TEXT_BASE - 0x40000000)) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) /* Default Environment */ diff --git a/include/configs/durian.h b/include/configs/durian.h index f0789d5fb3a..c224511832f 100644 --- a/include/configs/durian.h +++ b/include/configs/durian.h @@ -13,8 +13,6 @@ #define PHYS_SDRAM_1_SIZE 0x7B000000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (0x88000000 - 0x100000) - /* PCI CONFIG */ #define CONFIG_PCI_SCAN_SHOW diff --git a/include/configs/ea-lpc3250devkitv2.h b/include/configs/ea-lpc3250devkitv2.h index 2d0e7878799..1d655292d7e 100644 --- a/include/configs/ea-lpc3250devkitv2.h +++ b/include/configs/ea-lpc3250devkitv2.h @@ -18,7 +18,6 @@ /* * cmd */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE) /* * SoC-specific config diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 28bf35ca988..61571575081 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -29,9 +29,6 @@ * Environment is in the second sector of the first 256k of flash * *----------------------------------------------------------------------*/ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /*#define CONFIG_SYS_DRAM_TEST 1 */ #undef CONFIG_SYS_DRAM_TEST @@ -68,9 +65,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -84,7 +78,6 @@ #define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0 #define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 /* * For booting Linux, the board info and command line data @@ -106,7 +99,6 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 10000000 #define CONFIG_SYS_FLASH_SIZE 16*1024*1024 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } diff --git a/include/configs/ebisu.h b/include/configs/ebisu.h index 3adc4180efd..3dc111f5248 100644 --- a/include/configs/ebisu.h +++ b/include/configs/ebisu.h @@ -18,7 +18,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/edison.h b/include/configs/edison.h index 70cccc6fe6b..34536ecf850 100644 --- a/include/configs/edison.h +++ b/include/configs/edison.h @@ -10,10 +10,6 @@ /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 128 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - #define CONFIG_SYS_STACK_SIZE (32 * 1024) #define CONFIG_SYS_MONITOR_LEN (256 * 1024) diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 8e2c24594fa..1d6e6bcc434 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -15,12 +15,6 @@ * SPL */ -#define CONFIG_SPL_MAX_SIZE 0x0000fff0 -#define CONFIG_SPL_STACK 0x00020000 -#define CONFIG_SPL_BSS_START_ADDR 0x00020000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x0001ffff -#define CONFIG_SYS_SPL_MALLOC_START 0x00040000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x0001ffff #define CONFIG_SYS_UBOOT_BASE 0xfff90000 #define CONFIG_SYS_UBOOT_START 0x00800000 @@ -90,8 +84,6 @@ /* auto boot */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ - /* * Network */ @@ -141,7 +133,5 @@ /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) #endif /* _CONFIG_EDMINIV2_H */ diff --git a/include/configs/el6x_common.h b/include/configs/el6x_common.h index bcd7b84cf38..7fc3459ef29 100644 --- a/include/configs/el6x_common.h +++ b/include/configs/el6x_common.h @@ -58,11 +58,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ #endif /* __EL6Q_COMMON_CONFIG_H */ diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 1bf564c3606..00996f5cb78 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -32,11 +32,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ #if defined(CONFIG_ENV_IS_IN_MMC) @@ -58,12 +53,6 @@ #ifdef CONFIG_SPL #include "imx6_spl.h" /* RiOTboard */ -#define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000 -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6dl-riotboard.dtb" - -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* offset 69KB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* offset 69KB */ #endif diff --git a/include/configs/emsdp.h b/include/configs/emsdp.h index a560673512e..60fab0419f5 100644 --- a/include/configs/emsdp.h +++ b/include/configs/emsdp.h @@ -11,8 +11,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x10000000 #define CONFIG_SYS_SDRAM_SIZE SZ_16M -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_1M) - /* * Environment */ diff --git a/include/configs/espresso7420.h b/include/configs/espresso7420.h index d936b7f09fc..660d1a08049 100644 --- a/include/configs/espresso7420.h +++ b/include/configs/espresso7420.h @@ -13,8 +13,6 @@ #define CONFIG_ESPRESSO7420 #define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SPL_STACK CONFIG_IRAM_END -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_END /* DRAM Memory Banks */ #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 9cf93924df9..383beee17ae 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -77,12 +77,6 @@ #define CONFIG_FACTORYSET -/* use both define to compile a SPL compliance test */ -/* -#define CONFIG_SPL_CMT -#define CONFIG_SPL_CMT_DEBUG -*/ - /* nedded by compliance test in read mode */ /* Define own nand partitions */ diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 3231f3cc035..8e7bfadf64e 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -22,10 +22,8 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ /* 32kB internal SRAM */ -#define CONFIG_SRAM_BASE 0x00300000 /*AT91SAM9XE_SRAM_BASE */ -#define CONFIG_SRAM_SIZE (32 << 10) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_ADDR 0x00300000 /*AT91SAM9XE_SRAM_BASE */ +#define CONFIG_SYS_INIT_RAM_SIZE (32 << 10) /* 128MB SDRAM in 1 bank */ #define CONFIG_SYS_SDRAM_BASE 0x20000000 diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index dd1cbd7ab84..cbcef261f43 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -26,10 +26,5 @@ #define CONFIG_PWM /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #endif /* __CONFIG_H */ diff --git a/include/configs/exynos5250-common.h b/include/configs/exynos5250-common.h index 36c3a613eb7..82cb8aff7b5 100644 --- a/include/configs/exynos5250-common.h +++ b/include/configs/exynos5250-common.h @@ -13,12 +13,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) - -#define CONFIG_IRAM_STACK 0x02050000 - -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK - /* USB */ #define CONFIG_USB_EHCI_EXYNOS diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h index 51f9f221742..5e1aba7692e 100644 --- a/include/configs/exynos5420-common.h +++ b/include/configs/exynos5420-common.h @@ -16,8 +16,6 @@ #define CONFIG_IRAM_TOP 0x02074000 -#define CONFIG_SPL_MAX_FOOTPRINT (30 * 1024) - #define CONFIG_PHY_IRAM_BASE 0x02020000 /* Address for relocating helper code (Last 4 KB of IRAM) */ diff --git a/include/configs/exynos7420-common.h b/include/configs/exynos7420-common.h index 5658da474cb..e8aed567102 100644 --- a/include/configs/exynos7420-common.h +++ b/include/configs/exynos7420-common.h @@ -16,11 +16,6 @@ #include <linux/sizes.h> /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* select serial console configuration */ diff --git a/include/configs/exynos78x0-common.h b/include/configs/exynos78x0-common.h index ec43e133dde..4a2e56b6358 100644 --- a/include/configs/exynos78x0-common.h +++ b/include/configs/exynos78x0-common.h @@ -19,11 +19,6 @@ #include <linux/sizes.h> /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CPU_RELEASE_ADDR secondary_boot_addr @@ -31,7 +26,6 @@ {9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600} #define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_BOOTM_LEN SZ_32M /* DRAM Memory Banks */ #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h index 5e6a8ee770e..331e9ca8ba1 100644 --- a/include/configs/gardena-smart-gateway-at91sam.h +++ b/include/configs/gardena-smart-gateway-at91sam.h @@ -21,9 +21,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 megs */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) - /* NAND flash */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 @@ -36,13 +33,6 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 /* SPL */ -#define CONFIG_SPL_MAX_SIZE 0x7000 -#define CONFIG_SPL_STACK 0x308000 - -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN (512 << 10) @@ -51,12 +41,8 @@ #define CONFIG_SYS_MCKR 0x1301 #define CONFIG_SYS_MCKR_CSS 0x1302 -#define CONFIG_SPL_NAND_RAW_ONLY #define CONFIG_SYS_NAND_U_BOOT_SIZE 0xa0000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS -#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO - #endif diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h index 269bb93272c..d21a9b9383a 100644 --- a/include/configs/gardena-smart-gateway-mt7688.h +++ b/include/configs/gardena-smart-gateway-mt7688.h @@ -17,10 +17,6 @@ /* SPL */ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x80010000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x10000 -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_PAD_TO 0 /* Dummy value */ #define CONFIG_SYS_UBOOT_BASE 0 @@ -39,11 +35,6 @@ /* RAM */ -/* Memory usage */ -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) -#define CONFIG_SYS_CBSIZE 512 - /* Environment settings */ #endif /* __CONFIG_GARDENA_SMART_GATEWAY_H */ diff --git a/include/configs/gazerbeam.h b/include/configs/gazerbeam.h index 6b910d55193..25095e192f0 100644 --- a/include/configs/gazerbeam.h +++ b/include/configs/gazerbeam.h @@ -33,8 +33,6 @@ #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * FLASH on the Local Bus @@ -58,13 +56,6 @@ * Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is diff --git a/include/configs/ge_b1x5v2.h b/include/configs/ge_b1x5v2.h index b4f94992e64..252ab5e7473 100644 --- a/include/configs/ge_b1x5v2.h +++ b/include/configs/ge_b1x5v2.h @@ -13,7 +13,6 @@ #include "mx6_common.h" #include "imx6_spl.h" -#define CONFIG_SPL_TARGET "u-boot-with-spl.imx" /* PWM */ #define CONFIG_IMX6_PWM_PER_CLK 66000000 @@ -47,11 +46,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Command definition */ #define CONFIG_EXTRA_ENV_SETTINGS \ "image=/boot/fitImage\0" \ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index c80a07655ec..74a2eaa7896 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -105,11 +105,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/gose.h b/include/configs/gose.h index 4ffa5bea8f8..d1fe375a2c1 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -10,10 +10,9 @@ #include "rcar-gen2-common.h" -#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 #define STACK_AREA_SIZE 0x00100000 #define LOW_LEVEL_MERAM_STACK \ - (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + (SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) /* MEMORY */ #define RCAR_GEN2_SDRAM_BASE 0x40000000 @@ -33,8 +32,4 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" -/* SPL support */ -#define CONFIG_SPL_STACK 0xe6340000 -#define CONFIG_SPL_MAX_SIZE 0x4000 - #endif /* __GOSE_H */ diff --git a/include/configs/grpeach.h b/include/configs/grpeach.h index 347845f1d50..fb69716bcbf 100644 --- a/include/configs/grpeach.h +++ b/include/configs/grpeach.h @@ -11,13 +11,10 @@ /* Board Clock , P1 clock frequency (XTAL=13.33MHz) */ /* Miscellaneous */ -#define CONFIG_SYS_PBSIZE 256 /* Internal RAM Size (RZ/A1=3M, RZ/A1M=5M, RZ/A1H=10M) */ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE (10 * 1024 * 1024) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - 1024 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 86d0fb60f1d..26d171daae7 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -10,14 +10,8 @@ /* Location in NAND to read U-Boot from */ /* Falcon Mode */ -#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 - -/* Falcon Mode - NAND support: args@17MB kernel@18MB */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M) /* Falcon Mode - MMC support: args@1MB kernel@2MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) #include "imx6_spl.h" /* common IMX6 SPL configuration */ #include "mx6_common.h" @@ -82,11 +76,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* * MTD Command for mtdparts */ diff --git a/include/configs/helios4.h b/include/configs/helios4.h index 151ab66f4c3..23eb0d4375d 100644 --- a/include/configs/helios4.h +++ b/include/configs/helios4.h @@ -40,29 +40,6 @@ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" -/* SPL */ - -/* Defines for SPL */ -#define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - (CONFIG_SPL_TEXT_BASE - 0x40000000)) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - -#if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC) || defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA) -/* SPL related MMC defines */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ -#endif -#endif - /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 0ff70fdc668..d8e71269366 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -19,8 +19,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_64BIT_LBA @@ -30,7 +28,6 @@ #define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x01000000 #define CONFIG_EXTRA_ENV_SETTINGS \ "fdt_high=0x20000000\0" \ diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 19d5b6261f1..33e9aa5ffb4 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -30,8 +30,6 @@ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) - /* Generic Interrupt Controller Definitions */ #define GICD_BASE 0xf6801000 #define GICC_BASE 0xf6802000 @@ -61,8 +59,4 @@ /* Preserve environment on eMMC */ -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - #endif /* __HIKEY_H */ diff --git a/include/configs/hikey960.h b/include/configs/hikey960.h index c088f2f2b69..caa6abb9d9d 100644 --- a/include/configs/hikey960.h +++ b/include/configs/hikey960.h @@ -22,8 +22,6 @@ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) - /* Generic Interrupt Controller Definitions */ #define GICD_BASE 0xe82b1000 #define GICC_BASE 0xe82b2000 diff --git a/include/configs/hsdk-4xd.h b/include/configs/hsdk-4xd.h index d3d8896ecff..7785bab7147 100644 --- a/include/configs/hsdk-4xd.h +++ b/include/configs/hsdk-4xd.h @@ -25,9 +25,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_SDRAM_SIZE SZ_1G -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - #define CONFIG_SYS_BOOTM_LEN SZ_128M /* @@ -105,7 +102,6 @@ setenv core_iccm_3 0x6; setenv core_dccm_3 0x6;\0" */ /* Cli configuration */ -#define CONFIG_SYS_CBSIZE SZ_2K /* * Callback configuration diff --git a/include/configs/hsdk.h b/include/configs/hsdk.h index 64dce521056..6dd69ca38b4 100644 --- a/include/configs/hsdk.h +++ b/include/configs/hsdk.h @@ -24,9 +24,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_SDRAM_SIZE SZ_1G -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - #define CONFIG_SYS_BOOTM_LEN SZ_128M /* @@ -100,7 +97,6 @@ setenv core_iccm_2 0x10; setenv core_dccm_2 0x10; \ setenv core_iccm_3 0x6; setenv core_dccm_3 0x6;\0" /* Cli configuration */ -#define CONFIG_SYS_CBSIZE SZ_2K /* * Callback configuration diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 356bf6c636d..39a36779bc4 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -28,10 +28,6 @@ #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* * Internal Definitions @@ -108,7 +104,6 @@ /* * NOR FLASH setup */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT #define CONFIG_FLASH_SHOW_PROGRESS 50 #define CONFIG_SYS_FLASH_BASE 0xFF800000 @@ -216,8 +211,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_LOADS_ECHO #undef CONFIG_SYS_LOADS_BAUD_CHANGE diff --git a/include/configs/imgtec_xilfpga.h b/include/configs/imgtec_xilfpga.h index edd24a4b556..599b0c50def 100644 --- a/include/configs/imgtec_xilfpga.h +++ b/include/configs/imgtec_xilfpga.h @@ -25,8 +25,6 @@ /* SDRAM Configuration (for final code, data, stack, heap) */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 Mbytes */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - 0x1000) /*---------------------------------------------------------------------- * Commands @@ -35,7 +33,6 @@ /*------------------------------------------------------------ * Console Configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ /* ------------------------------------------------- * Environment diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 6790053bb8d..40c0f1fe36b 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -106,10 +106,6 @@ /* * U-Boot general configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -141,6 +137,4 @@ /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ - GENERATED_GBL_DATA_SIZE) #endif /* __IMX27LITE_COMMON_CONFIG_H */ diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index 26d7a88ebde..a2d5080a10e 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -113,11 +113,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_SP_OFFSET) - /* UART */ #ifdef CONFIG_MXC_UART # ifdef CONFIG_MX6UL @@ -140,13 +135,7 @@ /* Falcon Mode */ #ifdef CONFIG_SPL_OS_BOOT -# define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" -# define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -# define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 - /* MMC support: args@1MB kernel@2MB */ -# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ -# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) #endif /* Framebuffer */ diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h index 65f8944ccaf..592c62ab8ac 100644 --- a/include/configs/imx6_logic.h +++ b/include/configs/imx6_logic.h @@ -113,18 +113,12 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ /* NAND stuff */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00500000 /* USB Configs */ #ifdef CONFIG_CMD_USB @@ -135,12 +129,7 @@ #endif /* Falcon Mode */ -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 /* Falcon Mode - MMC support: args@1MB kernel@2MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) #endif /* __IMX6LOGIC_CONFIG_H */ diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 234aacb3b91..488b2f1696a 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -8,51 +8,6 @@ #ifdef CONFIG_SPL -#ifdef CONFIG_MX6_OCRAM_256KB -/* - * see Figure 8.4.1 in IMX6DQ Reference manuals: - * - IMX6DQ OCRAM (IRAM) is from 0x00907000 to 0x0093FFFF - * - BOOT ROM stack is at 0x0093FFB8 - * - if icache/dcache is enabled (eFuse/strapping controlled) then the - * IMX BOOT ROM will setup MMU table at 0x00938000, therefore we need to - * fit between 0x00907000 and 0x00938000. - * - Additionally the BOOT ROM loads what they consider the firmware image - * which consists of a 4K header in front of us that contains the IVT, DCD - * and some padding thus 'our' max size is really 0x00908000 - 0x00938000 - * or 192KB - */ -#define CONFIG_SPL_MAX_SIZE 0x30000 -#define CONFIG_SPL_STACK 0x0093FFB8 -/* - * Pad SPL to 196KB (4KB header + 192KB max size). This allows to write the - * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a - * boot media (given that boot media specific offset is configured properly). - */ -#define CONFIG_SPL_PAD_TO 0x31000 -#else -/* - * see Figure 8-3 in IMX6SDL Reference manuals: - * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF - * - BOOT ROM stack is at 0x0091FFB8 - * - if icache/dcache is enabled (eFuse/strapping controlled) then the - * IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to - * fit between 0x00907000 and 0x00918000. - * - Additionally the BOOT ROM loads what they consider the firmware image - * which consists of a 4K header in front of us that contains the IVT, DCD - * and some padding thus 'our' max size is really 0x00908000 - 0x00918000 - * or 64KB - */ -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_STACK 0x0091FFB8 -/* - * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the - * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a - * boot media (given that boot media specific offset is configured properly). - */ -#define CONFIG_SPL_PAD_TO 0x11000 - -#endif - /* MMC support */ #if defined(CONFIG_SPL_MMC) #define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */ @@ -60,31 +15,9 @@ /* SATA support */ #if defined(CONFIG_SPL_SATA) -#define CONFIG_SPL_SATA_BOOT_DEVICE 0 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1 #endif -/* Define the payload for FAT/EXT support */ -#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4) -# ifdef CONFIG_OF_CONTROL -# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" -# else -# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -# endif -#endif - -#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \ - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) -#define CONFIG_SPL_BSS_START_ADDR 0x88200000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x88300000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#else -#define CONFIG_SPL_BSS_START_ADDR 0x18200000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x18300000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#endif #endif #endif diff --git a/include/configs/imx6dl-mamoj.h b/include/configs/imx6dl-mamoj.h index ba79e1bccfa..c4eebb5aeac 100644 --- a/include/configs/imx6dl-mamoj.h +++ b/include/configs/imx6dl-mamoj.h @@ -51,13 +51,8 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Falcon */ -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000 /* MMC support: args@1MB kernel@2MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) /* Miscellaneous configurable options */ @@ -68,11 +63,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_SP_OFFSET) - /* SPL */ #include "imx6_spl.h" diff --git a/include/configs/imx6q-bosch-acc.h b/include/configs/imx6q-bosch-acc.h index 6d362557ac6..785ac7c5014 100644 --- a/include/configs/imx6q-bosch-acc.h +++ b/include/configs/imx6q-bosch-acc.h @@ -89,9 +89,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* SPL */ #ifdef CONFIG_SPL #include "imx6_spl.h" diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h index 2d9f8bb510b..2f00198e40e 100644 --- a/include/configs/imx7-cm.h +++ b/include/configs/imx7-cm.h @@ -74,11 +74,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* MMC Config*/ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/imx7_spl.h b/include/configs/imx7_spl.h index 128f612392f..5900c05db1f 100644 --- a/include/configs/imx7_spl.h +++ b/include/configs/imx7_spl.h @@ -11,52 +11,12 @@ #define __IMX7_SPL_CONFIG_H #ifdef CONFIG_SPL -/* - * see figure 6-22 in i.MX 7Dual/Solo Reference manuals: - * - IMX7D/S OCRAM free area RAM (OCRAM) is from 0x00910000 to - * 0x00946C00. - * - Set the stack at the end of the free area section, at 0x00946BB8. - * - The BOOT ROM loads what they consider the firmware image - * which consists of a 4K header in front of us that contains the IVT, DCD - * and some padding. However, the manual also states that the ROM uses the - * OCRAM_EPCD and OCRAM_PXP areas for itself. While the SPL is free to use - * this range for stack and malloc, the SPL itself must fit below 0x920000, - * or the image will be truncated in at least some boot modes like USB SDP. - * Thus our max size is really 0x00920000 - 0x00912000. If necessary, - * CONFIG_SPL_TEXT_BASE could be moved to 0x00911000 to gain 4KB of space - * for the SPL, but 56KB should be more than enough for the SPL. - */ -#define CONFIG_SPL_MAX_SIZE 0xE000 -#define CONFIG_SPL_STACK 0x00946BB8 -/* - * Pad SPL to 68KB (4KB header + 56KB max size + 8KB extra padding) - * The extra padding could be removed, but this value was used historically - * based on an incorrect CONFIG_SPL_MAX_SIZE definition. - * This allows to write the SPL/U-Boot combination generated with - * u-boot-with-spl.imx directly to a boot media (given that boot media specific - * offset is configured properly). - */ -#define CONFIG_SPL_PAD_TO 0x11000 /* MMC support */ #if defined(CONFIG_SPL_MMC) #define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */ #endif -/* Define the payload for FAT/EXT support */ -#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4) -# ifdef CONFIG_OF_CONTROL -# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" -# else -# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -# endif -#endif - -#define CONFIG_SPL_BSS_START_ADDR 0x88200000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x88300000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ - #endif /* CONFIG_SPL */ #endif /* __IMX7_SPL_CONFIG_H */ diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index 8d9212ec64c..297d56b427f 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -12,18 +12,11 @@ #include <config_distro_bootcmd.h> #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) -#define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x920000 -#define CONFIG_SPL_BSS_START_ADDR 0x910000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ - /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x912000 /* For RAW image gives a error info not panic */ @@ -135,10 +128,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -147,13 +136,6 @@ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index 573ddaf2952..897eac66b14 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -9,18 +9,11 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x920000 -#define CONFIG_SPL_BSS_START_ADDR 0x910000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ - /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ @@ -82,10 +75,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x200000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 @@ -93,10 +82,4 @@ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) #endif diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h index 67667dd523d..bb19aa292b8 100644 --- a/include/configs/imx8mm_data_modul_edm_sbc.h +++ b/include/configs/imx8mm_data_modul_edm_sbc.h @@ -12,16 +12,9 @@ #define CONFIG_SYS_BOOTM_LEN SZ_128M -#define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_1M -#define CONFIG_SPL_STACK 0x920000 #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_BSS_START_ADDR 0x910000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 kiB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M /* 16 MiB */ - #define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ @@ -32,21 +25,12 @@ /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x200000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* Minimum 1 GiB DDR */ -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR /* PHY needs a longer autonegotiation timeout after reset */ #define PHY_ANEG_TIMEOUT 20000 diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index 5e8f19c43fb..983743b5093 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -11,18 +11,11 @@ #include <asm/arch/imx-regs.h> #define CONFIG_SYS_BOOTM_LEN (64 * SZ_1M) -#define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x920000 -#define CONFIG_SPL_BSS_START_ADDR 0x910000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ - /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ @@ -58,10 +51,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x200000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -70,13 +59,6 @@ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - #define CONFIG_FEC_MXC_PHYADDR 0 #endif diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index b9b24a8c51d..e6642936cba 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -10,18 +10,11 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -# define CONFIG_SPL_STACK 0x920000 -# define CONFIG_SPL_BSS_START_ADDR 0x910000 -# define CONFIG_SPL_BSS_MAX_SIZE SZ_8K -# define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -# define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K - /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ # define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ @@ -53,10 +46,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_2M -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -68,13 +57,6 @@ /* UART */ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index 9836d5b73ca..595c1074966 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -9,18 +9,11 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x920000 -#define CONFIG_SPL_BSS_START_ADDR 0x910000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_1M - /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ @@ -89,10 +82,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_2M -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -104,11 +93,8 @@ /* UART */ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE SZ_2K -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) +/* FEC */ +#define CONFIG_FEC_MXC_PHYADDR 0 +#define FEC_QUIRK_ENET_MAC #endif diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index 79c6b1076ff..99cbc1d07c8 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -9,18 +9,11 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_BSS_START_ADDR 0x0095e000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K - /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x184000 @@ -94,10 +87,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x200000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 @@ -109,10 +98,4 @@ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) #endif diff --git a/include/configs/imx8mn_bsh_smm_s2_common.h b/include/configs/imx8mn_bsh_smm_s2_common.h index 6387576c2da..5bdbd37e9cb 100644 --- a/include/configs/imx8mn_bsh_smm_s2_common.h +++ b/include/configs/imx8mn_bsh_smm_s2_common.h @@ -12,19 +12,10 @@ #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) -#define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#define CONFIG_SPL_STACK 0x980000 -#define CONFIG_SPL_BSS_START_ADDR 0x950000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K - - - #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ @@ -37,23 +28,12 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_512K -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 #define CONFIG_MXC_UART_BASE UART4_BASE_ADDR -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE SZ_2K -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - /* I2C */ #endif /* __IMX8MN_BSH_SMM_S2_COMMON_H */ diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index 805ae2a7518..73ba49b0d8f 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -12,18 +12,11 @@ #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) -#define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x980000 -#define CONFIG_SPL_BSS_START_ADDR 0x950000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ - /* For RAW image gives a error info not panic */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE @@ -65,10 +58,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x200000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -77,11 +66,4 @@ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - #endif diff --git a/include/configs/imx8mn_var_som.h b/include/configs/imx8mn_var_som.h index 00358892b28..ce679098e5c 100644 --- a/include/configs/imx8mn_var_som.h +++ b/include/configs/imx8mn_var_som.h @@ -12,17 +12,10 @@ #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) -#define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#define CONFIG_SPL_STACK 0x980000 -#define CONFIG_SPL_BSS_START_ADDR 0x950000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) \ @@ -55,10 +48,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_512K -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 @@ -66,13 +55,6 @@ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(4) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE SZ_2K -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - /* USDHC */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h index 3cbe11a9035..8565ba7fdb1 100644 --- a/include/configs/imx8mn_venice.h +++ b/include/configs/imx8mn_venice.h @@ -9,18 +9,11 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x980000 -#define CONFIG_SPL_BSS_START_ADDR 0x950000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ - /* For RAW image gives a error info not panic */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif @@ -85,10 +78,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_2M -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -100,11 +89,8 @@ /* UART */ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE SZ_2K -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) +/* FEC */ +#define CONFIG_FEC_MXC_PHYADDR 0 +#define FEC_QUIRK_ENET_MAC #endif diff --git a/include/configs/imx8mp_dhcom_pdk2.h b/include/configs/imx8mp_dhcom_pdk2.h index 7d5403fa9f4..1ad90e5bdbd 100644 --- a/include/configs/imx8mp_dhcom_pdk2.h +++ b/include/configs/imx8mp_dhcom_pdk2.h @@ -12,16 +12,9 @@ #define CONFIG_SYS_BOOTM_LEN SZ_128M -#define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_1M #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x96FC00 -#define CONFIG_SPL_BSS_START_ADDR 0x0096FC00 -#define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KiB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x4c000000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 kiB */ - /* For RAW image gives a error info not panic */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE @@ -30,10 +23,6 @@ /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x200000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 @@ -41,13 +30,6 @@ #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - /* PHY needs a longer autonegotiation timeout after reset */ #define PHY_ANEG_TIMEOUT 20000 #define FEC_QUIRK_ENET_MAC diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 1e7c44c42a4..65c1616bca7 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -12,17 +12,11 @@ #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) -#define CONFIG_SPL_MAX_SIZE (152 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_STACK 0x960000 -#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00 -#define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE @@ -66,10 +60,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* Totally 6GB DDR */ @@ -81,11 +71,4 @@ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - #endif diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index 52e8ea8f86a..efff6b95553 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -14,7 +14,6 @@ #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) -#define CONFIG_SPL_MAX_SIZE (152 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -28,12 +27,6 @@ 0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x960000 -#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00 -#define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ - #define CONFIG_MALLOC_F_ADDR 0x184000 /* malloc f used before \ * GD_FLG_FULL_MALLOC_INIT \ * set \ @@ -149,10 +142,6 @@ /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* Totally 6GB or 4G DDR */ @@ -168,12 +157,7 @@ #define PHYS_SDRAM_2_SIZE 0x80000000 /* 2 GB */ #endif -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/imx8mp_venice.h b/include/configs/imx8mp_venice.h index 4120e4cc6ba..e1d33553956 100644 --- a/include/configs/imx8mp_venice.h +++ b/include/configs/imx8mp_venice.h @@ -9,18 +9,11 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SPL_MAX_SIZE (152 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x960000 -#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00 -#define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ - /* For RAW image gives a error info not panic */ #define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif @@ -85,10 +78,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_2M -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -100,13 +89,6 @@ /* UART */ #define CONFIG_MXC_UART_BASE UART2_BASE_ADDR -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE SZ_2K -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - /* FEC */ #define FEC_QUIRK_ENET_MAC diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index 6eecfc813a4..a242d5e3e8e 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -12,15 +12,9 @@ #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) -#define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ @@ -61,10 +55,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -73,13 +63,6 @@ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index e31f4135ae5..98ddb06fe33 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -12,16 +12,10 @@ #define CONFIG_SYS_BOOTM_LEN (64 * SZ_1M) -#define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ @@ -67,10 +61,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -79,13 +69,6 @@ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 57e45b0447c..1b3c0493ebd 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -9,16 +9,10 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SPL_MAX_SIZE (172 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ @@ -95,10 +89,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -107,13 +97,6 @@ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 61d56e269ac..f4d19f87312 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -13,14 +13,8 @@ #define CONFIG_SYS_BOOTM_LEN (64 * SZ_1M) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SPL_STACK 0x013E000 -#define CONFIG_SPL_BSS_START_ADDR 0x00128000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x00120000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ #define CONFIG_SERIAL_LPUART_BASE 0x5a060000 #define CONFIG_MALLOC_F_ADDR 0x00120000 @@ -112,8 +106,6 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 - /* Default environment is in SD */ /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */ diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index 81ab5d8caa5..88d38a1dcbd 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -10,10 +10,6 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SPL_MAX_SIZE (124 * 1024) -#define CONFIG_SPL_BSS_START_ADDR 0x00128000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ - #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 @@ -108,8 +104,6 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 - /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board, * USDHC3 is for SD on base board On DDR4 board, USDHC1 is mux for NAND, * USDHC2 is for SD, USDHC3 is for SD on base board diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index 26dc4ded030..a6aabc7add7 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -11,14 +11,8 @@ #include <asm/arch/imx-regs.h> #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SPL_STACK 0x013E000 -#define CONFIG_SPL_BSS_START_ADDR 0x00128000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x00120000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ #define CONFIG_SERIAL_LPUART_BASE 0x5a060000 #define CONFIG_MALLOC_F_ADDR 0x00120000 @@ -110,8 +104,6 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 - /* Default environment is in SD */ /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */ @@ -128,8 +120,5 @@ #endif /* Misc configuration */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #endif /* __IMX8QXP_MEK_H */ diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 05df43b39b4..987069447d5 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -10,17 +10,10 @@ #include <asm/arch/imx-regs.h> #define CONFIG_SYS_BOOTM_LEN (SZ_64M) -#define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x22050000 -#define CONFIG_SPL_BSS_START_ADDR 0x22048000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x22040000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x8000 /* 32 KB */ - #define CONFIG_MALLOC_F_ADDR 0x22040000 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE /* For RAW image gives a error info not panic */ @@ -62,20 +55,12 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - /* Using ULP WDOG for reset */ #define WDOG_BASE_ADDR WDG3_RBASE #endif diff --git a/include/configs/imxrt1020-evk.h b/include/configs/imxrt1020-evk.h index 79feab389e3..a2c004880a7 100644 --- a/include/configs/imxrt1020-evk.h +++ b/include/configs/imxrt1020-evk.h @@ -9,8 +9,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_INIT_SP_ADDR 0x20240000 - #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 #define PHYS_SDRAM 0x80000000 @@ -24,12 +22,6 @@ * Configuration of the external SDRAM memory */ -/* For SPL */ -#ifdef CONFIG_SUPPORT_SPL -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SYS_SPL_LEN 0x00008000 #define CONFIG_SYS_UBOOT_START 0x800023FD -#endif -/* For SPL ends */ #endif /* __IMXRT1020_EVK_H */ diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h index 5c2f975ba7f..e36718dc825 100644 --- a/include/configs/imxrt1050-evk.h +++ b/include/configs/imxrt1050-evk.h @@ -9,8 +9,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_INIT_SP_ADDR 0x20280000 - #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 #define PHYS_SDRAM 0x80000000 @@ -31,12 +29,6 @@ * Configuration of the external SDRAM memory */ -/* For SPL */ -#ifdef CONFIG_SUPPORT_SPL -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SYS_SPL_LEN 0x00008000 #define CONFIG_SYS_UBOOT_START 0x800023FD -#endif -/* For SPL ends */ #endif /* __IMXRT1050_EVK_H */ diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h index d578b024605..34eec5a33d2 100644 --- a/include/configs/integrator-common.h +++ b/include/configs/integrator-common.h @@ -31,11 +31,6 @@ #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET /* * FLASH and environment organization diff --git a/include/configs/iot2050.h b/include/configs/iot2050.h index 91ed76bb40b..296bcd4c7b7 100644 --- a/include/configs/iot2050.h +++ b/include/configs/iot2050.h @@ -14,10 +14,6 @@ #include <linux/sizes.h> /* SPL Loader Configuration */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \ - CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE) - -#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/iot_devkit.h b/include/configs/iot_devkit.h index 56a67f28914..0ebb1b526e9 100644 --- a/include/configs/iot_devkit.h +++ b/include/configs/iot_devkit.h @@ -30,12 +30,12 @@ * : : | * : : CONFIG_SYS_MALLOC_LEN * : : - * : Specified explicitly by CONFIG_SYS_INIT_SP_ADDR + * : Specified explicitly by CONFIG_CUSTOM_SYS_INIT_SP_ADDR * : * Specified explicitly by CONFIG_SYS_SDRAM_BASE * * NOTES: - * - Stack starts from CONFIG_SYS_INIT_SP_ADDR and grows down, + * - Stack starts from CONFIG_CUSTOM_SYS_INIT_SP_ADDR and grows down, * i.e. towards CONFIG_SYS_SDRAM_BASE but nothing stops it from crossing * that CONFIG_SYS_SDRAM_BASE in which case data won't be really saved on * stack any longer and values popped from stack will contain garbage @@ -53,16 +53,14 @@ #define CONFIG_SYS_SDRAM_BASE DCCM_BASE #define CONFIG_SYS_SDRAM_SIZE DCCM_SIZE -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32K) - #define CONFIG_SYS_BOOTM_LEN SZ_128K #define ROM_BASE CONFIG_SYS_MONITOR_BASE #define ROM_SIZE SZ_256K -#define RAM_DATA_BASE CONFIG_SYS_INIT_SP_ADDR +#define RAM_DATA_BASE SYS_INIT_SP_ADDR #define RAM_DATA_SIZE CONFIG_SYS_SDRAM_SIZE - \ - (CONFIG_SYS_INIT_SP_ADDR - \ + (SYS_INIT_SP_ADDR - \ CONFIG_SYS_SDRAM_BASE) - \ CONFIG_SYS_MALLOC_LEN - \ CONFIG_ENV_SIZE diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index 2590ee6b014..a81496145c6 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -20,41 +20,12 @@ /* SPL Loader Configuration */ #if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + SZ_4M) #define CONFIG_SYS_UBOOT_BASE 0x50280000 /* Image load address in RAM for DFU boot*/ #else #define CONFIG_SYS_UBOOT_BASE 0x50080000 -/* - * Maximum size in memory allocated to the SPL BSS. Keep it as tight as - * possible (to allow the build to go through), as this directly affects - * our memory footprint. The less we use for BSS the more we have available - * for everything else. - */ -#define CONFIG_SPL_BSS_MAX_SIZE 0xA000 -/* - * Link BSS to be within SPL in a dedicated region located near the top of - * the MCU SRAM, this way making it available also before relocation. Note - * that we are not using the actual top of the MCU SRAM as there is a memory - * location filled in by the boot ROM that we want to read out without any - * interference from the C context. - */ -#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\ - CONFIG_SPL_BSS_MAX_SIZE) -/* Set the stack right below the SPL BSS section */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_BSS_START_ADDR -/* Configure R5 SPL post-relocation malloc pool in DDR */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84000000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M -/* Image load address in RAM for DFU boot*/ #endif -#ifdef CONFIG_SYS_K3_SPL_ATF -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin" -#endif - -#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE - #define CONFIG_SYS_BOOTM_LEN SZ_64M /* HyperFlash related configuration */ diff --git a/include/configs/j721s2_evm.h b/include/configs/j721s2_evm.h index a5505f079b4..8e3ea670d08 100644 --- a/include/configs/j721s2_evm.h +++ b/include/configs/j721s2_evm.h @@ -21,41 +21,12 @@ /* SPL Loader Configuration */ #if defined(CONFIG_TARGET_J721S2_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + SZ_4M) #define CONFIG_SYS_UBOOT_BASE 0x50280000 /* Image load address in RAM for DFU boot*/ #else #define CONFIG_SYS_UBOOT_BASE 0x50080000 -/* - * Maximum size in memory allocated to the SPL BSS. Keep it as tight as - * possible (to allow the build to go through), as this directly affects - * our memory footprint. The less we use for BSS the more we have available - * for everything else. - */ -#define CONFIG_SPL_BSS_MAX_SIZE 0xA000 -/* - * Link BSS to be within SPL in a dedicated region located near the top of - * the MCU SRAM, this way making it available also before relocation. Note - * that we are not using the actual top of the MCU SRAM as there is a memory - * location filled in by the boot ROM that we want to read out without any - * interference from the C context. - */ -#define CONFIG_SPL_BSS_START_ADDR (0x41c80000 -\ - CONFIG_SPL_BSS_MAX_SIZE) -/* Set the stack right below the SPL BSS section */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_BSS_START_ADDR -/* Configure R5 SPL post-relocation malloc pool in DDR */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84000000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M -/* Image load address in RAM for DFU boot*/ #endif -#ifdef CONFIG_SYS_K3_SPL_ATF -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin" -#endif - -#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE - #define CONFIG_SYS_BOOTM_LEN SZ_64M /* U-Boot general configuration */ diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 85cf516e162..4bca1a78302 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -12,15 +12,6 @@ /* * Miscellaneous configurable options */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_HUSH_INIT_VAR #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h index e1c161586b4..c8929814aaa 100644 --- a/include/configs/km/km-mpc83xx.h +++ b/include/configs/km/km-mpc83xx.h @@ -38,8 +38,6 @@ #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) /* * Init Local Bus Memory Controller: * diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index dca5589a3ef..7430185666e 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -187,11 +187,6 @@ #define CONFIG_LS102XA_STREAM_ID -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #define CONFIG_SYS_MONITOR_LEN 0x100000 /* 1Mbyte */ #define CONFIG_SYS_BOOTCOUNT_BE diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index dc45d16bfe1..4de5736d8ce 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -339,9 +339,7 @@ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN 0xc0000 /* 768k */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index c0997aa3ddd..736865ad80a 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -10,10 +10,9 @@ #include "rcar-gen2-common.h" -#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 #define STACK_AREA_SIZE 0x00100000 #define LOW_LEVEL_MERAM_STACK \ - (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + (SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) /* MEMORY */ #define RCAR_GEN2_SDRAM_BASE 0x40000000 @@ -34,7 +33,5 @@ "bootm_size=0x10000000\0" /* SPL support */ -#define CONFIG_SPL_STACK 0xe6340000 -#define CONFIG_SPL_MAX_SIZE 0x4000 #endif /* __KOELSCH_H */ diff --git a/include/configs/kontron-sl-mx6ul.h b/include/configs/kontron-sl-mx6ul.h index 7bc402d578e..b6e68f8f41a 100644 --- a/include/configs/kontron-sl-mx6ul.h +++ b/include/configs/kontron-sl-mx6ul.h @@ -22,11 +22,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE /* Board and environment settings */ diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h index 231571b05eb..95b836c5470 100644 --- a/include/configs/kontron-sl-mx8mm.h +++ b/include/configs/kontron-sl-mx8mm.h @@ -22,11 +22,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x200000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Board and environment settings */ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3) #define CONFIG_HOSTNAME "kontron-mx8mm" @@ -58,14 +53,8 @@ #endif #define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x91fff0 -#define CONFIG_SPL_BSS_START_ADDR 0x910000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x930000 #endif diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h index 1834991ac3b..88aaa55bef5 100644 --- a/include/configs/kontron_pitx_imx8m.h +++ b/include/configs/kontron_pitx_imx8m.h @@ -9,7 +9,6 @@ #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) -#define CONFIG_SPL_MAX_SIZE (124 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN (512 * SZ_1K) /* GUID for capsule updatable firmware image */ @@ -18,11 +17,6 @@ 0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ @@ -74,10 +68,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index c47b5940fb2..6beb0bdf3ed 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -26,7 +26,6 @@ #define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 /* early stack pointer */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xeff0) /* SMP */ #define CPU_RELEASE_ADDR secondary_boot_addr @@ -42,13 +41,7 @@ #define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) /* SPL */ -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SPL_MAX_SIZE 0x20000 -#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) /* GUID for capsule updatable firmware image */ diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h index 534263f62b3..c401fd32169 100644 --- a/include/configs/kp_imx53.h +++ b/include/configs/kp_imx53.h @@ -61,7 +61,6 @@ #include <config_distro_bootcmd.h> /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Physical Memory Map */ #define PHYS_SDRAM_1 CSD0_BASE_ADDR @@ -72,11 +71,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ #endif /* __CONFIG_H_ */ diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h index 7d879477d70..5b25be5c925 100644 --- a/include/configs/kp_imx6q_tpc.h +++ b/include/configs/kp_imx6q_tpc.h @@ -97,12 +97,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment */ #endif /* __KP_IMX6Q_TPC_IMX6_CONFIG_H_ */ diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index 7e99490e527..e084f87d14d 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -19,11 +19,9 @@ /* NOR Flash */ #define KZM_FLASH_BASE (0x00000000) #define CONFIG_SYS_FLASH_BASE (KZM_FLASH_BASE) -#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT) #define CONFIG_SYS_MAX_FLASH_SECT (512) /* prompt */ -#define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* SCIF */ @@ -33,9 +31,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR (0xE5600000) /* on MERAM */ #define CONFIG_SYS_INIT_RAM_SIZE (0x10000) #define LOW_LEVEL_MERAM_STACK (CONFIG_SYS_INIT_RAM_ADDR - 4) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) #define CONFIG_SDRAM_OFFSET_FOR_RT (16 * 1024 * 1024) #define CONFIG_SYS_SDRAM_BASE (KZM_SDRAM_BASE + CONFIG_SDRAM_OFFSET_FOR_RT) #define CONFIG_SYS_SDRAM_SIZE (PHYS_SDRAM_SIZE - CONFIG_SDRAM_OFFSET_FOR_RT) diff --git a/include/configs/lager.h b/include/configs/lager.h index a5abbaaeab1..f3feaa539fc 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -11,10 +11,9 @@ #include "rcar-gen2-common.h" -#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 #define STACK_AREA_SIZE 0x00100000 #define LOW_LEVEL_MERAM_STACK \ - (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + (SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) /* MEMORY */ #define RCAR_GEN2_SDRAM_BASE 0x40000000 @@ -35,7 +34,5 @@ "bootm_size=0x10000000\0" /* SPL support */ -#define CONFIG_SPL_STACK 0xe6340000 -#define CONFIG_SPL_MAX_SIZE 0x4000 #endif /* __LAGER_H */ diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index 4c132c6851a..418b08e7335 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -50,8 +50,6 @@ /* * U-Boot general configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ /* * Linux Information @@ -96,8 +94,6 @@ /* additions for new relocation code, must added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0xc0000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x80010000 - #include <asm/arch/hardware.h> #endif /* __CONFIG_H */ diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h index 86bad6fa036..2e077dd5161 100644 --- a/include/configs/linkit-smart-7688.h +++ b/include/configs/linkit-smart-7688.h @@ -17,10 +17,6 @@ /* SPL */ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x80010000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x10000 -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_PAD_TO 0 /* Dummy value */ #define CONFIG_SYS_UBOOT_BASE 0 @@ -40,11 +36,6 @@ /* RAM */ -/* Memory usage */ -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) -#define CONFIG_SYS_CBSIZE 512 - /* Environment settings */ #endif /* __CONFIG_LINKIT_SMART_7688_H */ diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h index fdea7241b02..3c03368b5c0 100644 --- a/include/configs/liteboard.h +++ b/include/configs/liteboard.h @@ -94,11 +94,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* FLASH and environment organization */ /* USB Configs */ diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 67da01f5e3a..1d8d9485e74 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -10,12 +10,6 @@ #include <asm/arch/stream_id_lsch2.h> #include <linux/sizes.h> -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) -#endif - #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE @@ -68,10 +62,6 @@ "bootm $kernel_load" #endif -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #include <asm/arch/soc.h> diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 82ae3492a2f..6a0ccbf836f 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -42,15 +42,6 @@ #define SDRAM_CFG_BI 0x00000001 #ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_MAX_SIZE 0x1a000 -#define CONFIG_SPL_STACK 0x1001d000 -#define CONFIG_SPL_PAD_TO 0x1c000 - -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN 0x80000 #endif @@ -136,11 +127,6 @@ #define CONFIG_LS102XA_STREAM_ID -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #include <asm/fsl_secure_boot.h> #endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 7b79e0841a5..e17bdcad6d0 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -11,31 +11,14 @@ #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE #ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_MAX_SIZE 0x1a000 -#define CONFIG_SPL_STACK 0x1001d000 -#define CONFIG_SPL_PAD_TO 0x1c000 - -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN 0xc0000 #endif #ifdef CONFIG_NAND_BOOT -#define CONFIG_SPL_MAX_SIZE 0x1a000 -#define CONFIG_SPL_STACK 0x1001d000 -#define CONFIG_SPL_PAD_TO 0x1c000 - #define CONFIG_SYS_NAND_U_BOOT_SIZE (400 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN 0x80000 #endif @@ -359,11 +342,6 @@ #define CONFIG_LS102XA_STREAM_ID -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* * Environment */ diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index 09168a28e7d..905c63d4dda 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -44,16 +44,6 @@ #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) #endif /* ifdef CONFIG_NXP_ESBC */ -#define CONFIG_SPL_MAX_SIZE 0x1a000 -#define CONFIG_SPL_STACK 0x1001d000 -#define CONFIG_SPL_PAD_TO 0x1c000 - -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - #ifdef CONFIG_U_BOOT_HDR_SIZE /* * HDR would be appended at end of image and copied to DDR along @@ -176,19 +166,8 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - #define CONFIG_LS102XA_STREAM_ID -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment */ #define CONFIG_SYS_BOOTM_LEN 0x8000000 /* 128 MB */ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index b36c8dccf17..d85a776daa1 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -46,16 +46,6 @@ #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) #endif /* ifdef CONFIG_NXP_ESBC */ -#define CONFIG_SPL_MAX_SIZE 0x1a000 -#define CONFIG_SPL_STACK 0x1001d000 -#define CONFIG_SPL_PAD_TO 0x1c000 - -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - #ifdef CONFIG_U_BOOT_HDR_SIZE /* * HDR would be appended at end of image and copied to DDR along @@ -338,11 +328,6 @@ #define CONFIG_LS102XA_STREAM_ID -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* * Environment */ diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index a98d8dd7200..5b0b86b39be 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -11,7 +11,6 @@ #include <asm/arch/soc.h> /* Link Definitions */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL @@ -58,14 +57,6 @@ "run emmc_hdploadcmd; run distro_bootcmd;run emmc_bootcmd; " \ "env exists secureboot && esbc_halt;" -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ - -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #define OCRAM_NONSECURE_SIZE 0x00010000 diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 26db8ffe7e2..fe9a8fd3754 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -30,11 +30,6 @@ #include <asm/arch/config.h> /* Link Definitions */ -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) -#endif #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 @@ -51,17 +46,6 @@ /* SD boot SPL */ #ifdef CONFIG_SD_BOOT - -#define CONFIG_SPL_MAX_SIZE 0x17000 -#define CONFIG_SPL_STACK 0x1001e000 -#define CONFIG_SPL_PAD_TO 0x1d000 - -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x8f000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - #ifdef CONFIG_NXP_ESBC #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) /* @@ -78,15 +62,8 @@ /* NAND SPL */ #ifdef CONFIG_NAND_BOOT -#define CONFIG_SPL_PBL_PAD -#define CONFIG_SPL_MAX_SIZE 0x1a000 -#define CONFIG_SPL_STACK 0x1001d000 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 #ifdef CONFIG_NXP_ESBC #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) @@ -254,11 +231,6 @@ #endif #endif -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #include <asm/arch/soc.h> diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index b4329c2e89e..75d655c50d6 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -128,7 +128,6 @@ #endif #ifdef CONFIG_NAND_BOOT -#define CONFIG_SPL_PAD_TO 0x20000 /* block aligned */ #define CONFIG_SYS_NAND_U_BOOT_SIZE (640 << 10) #endif @@ -315,9 +314,6 @@ * Miscellaneous configurable options */ -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - /* * Environment */ diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 3ac4cb7643d..edb4e64ee41 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -19,12 +19,6 @@ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif -#ifdef CONFIG_SD_BOOT -#define CONFIG_SYS_SPL_ARGS_ADDR 0x90000000 -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x500 -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 30 -#endif - /* * NOR Flash Definitions */ @@ -101,7 +95,6 @@ #define CONFIG_MTD_NAND_VERIFY_WRITE #ifdef CONFIG_NAND_BOOT -#define CONFIG_SPL_PAD_TO 0x20000 /* block aligned */ #define CONFIG_SYS_NAND_U_BOOT_SIZE (1024 << 10) #endif diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index fb2011aa559..8e9103562eb 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -30,11 +30,6 @@ #include <asm/arch/stream_id_lsch2.h> /* Link Definitions */ -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) -#endif #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 @@ -51,15 +46,6 @@ /* SD boot SPL */ #ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */ -#define CONFIG_SPL_STACK 0x10020000 -#define CONFIG_SPL_PAD_TO 0x21000 /* 132 KiB */ -#define CONFIG_SPL_BSS_START_ADDR 0x8f000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - #ifdef CONFIG_NXP_ESBC #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) /* @@ -75,32 +61,14 @@ #endif #if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL) -#define CONFIG_SPL_TARGET "spl/u-boot-spl.pbl" -#define CONFIG_SPL_MAX_SIZE 0x1f000 -#define CONFIG_SPL_STACK 0x10020000 -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SPL_BSS_START_ADDR 0x8f000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SYS_MONITOR_LEN 0x100000 #endif /* NAND SPL */ #ifdef CONFIG_NAND_BOOT -#define CONFIG_SPL_PBL_PAD - -#define CONFIG_SPL_MAX_SIZE 0x17000 /* 90 KiB */ -#define CONFIG_SPL_STACK 0x1001f000 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x8f000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SYS_MONITOR_LEN 0xa0000 #endif @@ -234,11 +202,6 @@ #endif -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #include <asm/arch/soc.h> diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 05aeedc4107..6271135db9f 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -145,7 +145,6 @@ #endif #ifdef CONFIG_NAND_BOOT -#define CONFIG_SPL_PAD_TO 0x40000 /* block aligned */ #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #endif @@ -333,9 +332,6 @@ * Miscellaneous configurable options */ -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - /* * Environment */ diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 3dfbae268e4..4ad62b43f8c 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -20,7 +20,6 @@ #if defined(CONFIG_QSPI_BOOT) #define CONFIG_SYS_UBOOT_BASE 0x40100000 -#define CONFIG_SYS_SPL_ARGS_ADDR 0x90000000 #endif #define CONFIG_SYS_NAND_BASE 0x7e800000 @@ -139,8 +138,6 @@ #endif #endif -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - #include <asm/fsl_secure_boot.h> #endif /* __LS1046ARDB_H__ */ diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 0c73a9e0dce..9a29bb6ca1e 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -25,11 +25,6 @@ #define LS1088ARDB_PB_BOARD 0x4A /* Link Definitions */ -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) -#endif /* Link Definitions */ #define CONFIG_SYS_FSL_QSPI_BASE 0x20000000 @@ -148,23 +143,7 @@ unsigned long long get_qixis_addr(void); " 0x580e00000 \0" #endif -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - #ifdef CONFIG_SPL -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SPL_MAX_SIZE 0x16000 -#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" - -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 - #ifdef CONFIG_NXP_ESBC #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) /* diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index e77e9b7f376..f9eb829cda2 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -11,11 +11,6 @@ #include <asm/arch/config.h> /* Link Definitions */ -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) -#endif /* We need architecture specific misc initializations */ @@ -142,22 +137,10 @@ unsigned long long get_qixis_addr(void); "mcinitcmd=fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SPL_MAX_SIZE 0x16000 -#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" - #ifdef CONFIG_NAND_BOOT #define CONFIG_SYS_NAND_U_BOOT_DST 0x80400000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST #endif -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 4975fb782b3..9ce48a09602 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -191,7 +191,6 @@ #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 -#define CONFIG_SPL_PAD_TO 0x20000 #define CONFIG_SYS_NAND_U_BOOT_SIZE (640 * 1024) #endif #else diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 52a48bd4b89..cdfc9fd82e8 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -174,7 +174,6 @@ #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 -#define CONFIG_SPL_PAD_TO 0x80000 #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 * 1024) #else #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index aaba8fc26d9..56096682c06 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -12,7 +12,6 @@ #define CONFIG_FSL_MEMAC -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_FLASH_BASE 0x20000000 /* DDR */ @@ -115,13 +114,6 @@ #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ /* Initial environment variables */ diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index 90877f548d6..ed44f355da8 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -24,18 +24,9 @@ #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* * U-Boot general configurations */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ -#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* Boot argument buffer size */ /* * Serial Driver @@ -117,9 +108,6 @@ /* * NAND SPL */ -#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx" -#define CONFIG_SPL_PAD_TO 0x8000 -#define CONFIG_SPL_STACK 0x70004000 #define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) diff --git a/include/configs/malta.h b/include/configs/malta.h index 84e5f985b1a..225ed7cd5cd 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -37,7 +37,6 @@ #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 -#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) #define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) /* diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index e4df9d8dfff..db84302231a 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -46,22 +46,6 @@ * L2 cache thus cannot be used. */ -/* SPL */ -/* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE ((128 << 10) - (CONFIG_SPL_TEXT_BASE - 0x40000000)) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - -/* SPL related SPI defines */ - /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ #define CONFIG_SYS_SDRAM_SIZE SZ_1G diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h index dcce52eb7d3..2c862e9ddcc 100644 --- a/include/configs/mccmon6.h +++ b/include/configs/mccmon6.h @@ -12,16 +12,12 @@ #include "imx6_spl.h" #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000) -#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 /* * Below defines are set but NOT really used since we by * design force U-Boot run when we boot in development * mode from SD card (SD2) */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800) -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80) -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage" #define CONFIG_MXC_UART_BASE UART1_BASE @@ -31,7 +27,6 @@ /* NOR 16-bit mode */ #define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_FLASH_VERIFY @@ -227,11 +222,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ /* Envs are stored in NOR flash */ diff --git a/include/configs/meerkat96.h b/include/configs/meerkat96.h index ab8fa85f25e..0ccfe7db5a4 100644 --- a/include/configs/meerkat96.h +++ b/include/configs/meerkat96.h @@ -21,11 +21,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment configs */ /* USB configs */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 6b6c90eb5ed..6b2296788dc 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -47,13 +47,8 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_SIZE -/* - * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, - * leaving the correct space for initial global data structure above - * that address while providing maximum stack area below. - */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM0 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM0 +#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024) /* NAND flash */ #ifdef CONFIG_CMD_NAND @@ -69,6 +64,4 @@ /* hw-controller addresses */ #define CONFIG_ET1100_BASE 0x70000000 -#define CONFIG_SYS_CBSIZE 512 - #endif diff --git a/include/configs/meson64.h b/include/configs/meson64.h index 196e58ed9a3..51dd4d706e0 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -29,11 +29,7 @@ #define STDIN_CFG "serial" #endif -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_CBSIZE 1024 - #define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_INIT_SP_ADDR 0x20000000 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */ /* ROM USB boot support, auto-execute boot.scr at scriptaddr */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 663837f33dc..2adc1f6d86b 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -34,11 +34,6 @@ #define XILINX_DCACHE_BYTE_SIZE 32768 #endif -/* size of console buffer */ -#define CONFIG_SYS_CBSIZE 512 -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 15 - #define CONFIG_HOSTNAME "microblaze-generic" /* architecture dependent code */ @@ -120,28 +115,10 @@ #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -/* for booting directly linux */ -#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_TEXT_BASE + \ - 0x40000) - -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \ - 0x1000000) - /* SP location before relocation, must use scratch RAM */ /* BRAM start */ #define CONFIG_SYS_INIT_RAM_ADDR 0x0 /* BRAM size - will be generated */ #define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE) - -/* Just for sure that there is a space for stack */ -#define CONFIG_SPL_STACK_SIZE 0x100 - -#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_INIT_RAM_ADDR - \ - CONFIG_SYS_MALLOC_F_LEN - \ - CONFIG_SPL_STACK_SIZE) - #endif /* __CONFIG_H */ diff --git a/include/configs/microchip_mpfs_icicle.h b/include/configs/microchip_mpfs_icicle.h index 655c8d6af5d..236db537db7 100644 --- a/include/configs/microchip_mpfs_icicle.h +++ b/include/configs/microchip_mpfs_icicle.h @@ -10,7 +10,6 @@ #include <linux/sizes.h> #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/mt7620.h b/include/configs/mt7620.h index 703efcd8f34..db4d68d7507 100644 --- a/include/configs/mt7620.h +++ b/include/configs/mt7620.h @@ -10,24 +10,15 @@ #define CONFIG_SYS_MIPS_TIMER_FREQ 290000000 -#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 #define CONFIG_SYS_BOOTM_LEN 0x1000000 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_CBSIZE 1024 - /* SPL */ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x80010000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x10000 -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_PAD_TO 0 /* Dummy value */ #define CONFIG_SYS_UBOOT_BASE 0 diff --git a/include/configs/mt7622.h b/include/configs/mt7622.h index 97fcf2f87bd..6c681a3c30b 100644 --- a/include/configs/mt7622.h +++ b/include/configs/mt7622.h @@ -11,11 +11,7 @@ #include <linux/sizes.h> -#define CONFIG_SYS_MAXARGS 8 #define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONFIG_SYS_CBSIZE SZ_1K -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_NONCACHED_MEMORY SZ_1M /* Uboot definition */ @@ -23,8 +19,6 @@ /* SPL -> Uboot */ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \ - GENERATED_GBL_DATA_SIZE) /* DRAM */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h index 6023f8128ef..06367221ebc 100644 --- a/include/configs/mt7623.h +++ b/include/configs/mt7623.h @@ -13,19 +13,13 @@ /* Miscellaneous configurable options */ -#define CONFIG_SYS_MAXARGS 8 #define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONFIG_SYS_CBSIZE SZ_1K -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_NONCACHED_MEMORY SZ_1M /* Environment */ /* Preloader -> Uboot */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \ - GENERATED_GBL_DATA_SIZE) /* MMC */ #define MMC_SUPPORTS_TUNING diff --git a/include/configs/mt7628.h b/include/configs/mt7628.h index 1008aaab1d2..4dcfa39350c 100644 --- a/include/configs/mt7628.h +++ b/include/configs/mt7628.h @@ -10,17 +10,12 @@ #define CONFIG_SYS_MIPS_TIMER_FREQ 290000000 -#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_OFFSET 0x80000 #define CONFIG_SYS_BOOTM_LEN 0x1000000 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_CBSIZE 1024 - /* Serial SPL */ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) #define CONFIG_SYS_NS16550_MEM32 @@ -36,10 +31,6 @@ /* SPL */ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x80010000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x10000 -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_PAD_TO 0 /* Dummy value */ #define CONFIG_SYS_UBOOT_BASE 0 diff --git a/include/configs/mt7629.h b/include/configs/mt7629.h index c58545be04b..87e2251777c 100644 --- a/include/configs/mt7629.h +++ b/include/configs/mt7629.h @@ -13,31 +13,20 @@ /* Miscellaneous configurable options */ -#define CONFIG_SYS_MAXARGS 8 #define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONFIG_SYS_CBSIZE SZ_1K -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_NONCACHED_MEMORY SZ_1M /* Environment */ /* Defines for SPL */ -#define CONFIG_SPL_STACK 0x106000 -#define CONFIG_SPL_MAX_SIZE SZ_64K -#define CONFIG_SPL_MAX_FOOTPRINT SZ_64K -#define CONFIG_SPL_PAD_TO 0x10000 #define CONFIG_SPI_ADDR 0x30000000 #define CONFIG_SYS_UBOOT_BASE (CONFIG_SPI_ADDR + CONFIG_SPL_PAD_TO) /* SPL -> Uboot */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \ - GENERATED_GBL_DATA_SIZE) /* UBoot -> Kernel */ -#define CONFIG_SYS_SPL_ARGS_ADDR 0x40000000 /* DRAM */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/mt8183.h b/include/configs/mt8183.h index ee31c02e6ef..665a4e44f3f 100644 --- a/include/configs/mt8183.h +++ b/include/configs/mt8183.h @@ -18,9 +18,6 @@ #define CONFIG_SYS_NS16550_COM1 0x11005200 #define CONFIG_SYS_NS16550_CLK 26000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \ - GENERATED_GBL_DATA_SIZE) - #define CONFIG_SYS_BOOTM_LEN SZ_64M /* Environment settings */ diff --git a/include/configs/mt8512.h b/include/configs/mt8512.h index 1af8d2e480c..d4aa279b551 100644 --- a/include/configs/mt8512.h +++ b/include/configs/mt8512.h @@ -18,9 +18,6 @@ /* Uboot definition */ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + \ - SZ_2M - \ - GENERATED_GBL_DATA_SIZE) #define ENV_BOOT_READ_IMAGE \ "boot_rd_img=mmc dev 0" \ diff --git a/include/configs/mt8516.h b/include/configs/mt8516.h index cb2af5843fc..928f4b0dc77 100644 --- a/include/configs/mt8516.h +++ b/include/configs/mt8516.h @@ -18,9 +18,6 @@ #define CONFIG_SYS_NS16550_COM1 0x11005000 #define CONFIG_SYS_NS16550_CLK 26000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \ - GENERATED_GBL_DATA_SIZE) - #define CONFIG_SYS_BOOTM_LEN SZ_64M /* Environment settings */ diff --git a/include/configs/mt8518.h b/include/configs/mt8518.h index 8ca8d25148a..e313f6f6afa 100644 --- a/include/configs/mt8518.h +++ b/include/configs/mt8518.h @@ -21,9 +21,6 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M /* Uboot definition */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + \ - SZ_2M - \ - GENERATED_GBL_DATA_SIZE) #define ENV_BOOT_READ_IMAGE \ "boot_rd_img=mmc dev 0" \ diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index cc3b597f286..384a8f7d1dd 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -50,12 +50,9 @@ /* auto boot */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ - /* * Other required minimal configurations */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ /* ====> Include platform Common Definitions */ #include <asm/arch/config.h> diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index 06882fb51e8..cae70760bcb 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -25,15 +25,9 @@ 4000000, 4500000, 5000000, 5500000, \ 6000000 } -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ - /* * Other required minimal configurations */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ - -/* End of 16M scrubbed by training in bootrom */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) /* * Environment diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index 8e325e8f4a0..7d7c218bc6a 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -19,15 +19,9 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 115200, 230400, 460800, 921600 } -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ - /* * Other required minimal configurations */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ - -/* End of 16M scrubbed by training in bootrom */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) /* When runtime detection fails this is the default */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index ccfe292f6c6..a423dd28b07 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -117,11 +117,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #define CONFIG_SYS_DDR_CLKSEL 0 #define CONFIG_SYS_CLKTL_CBCDR 0x59E35100 #define CONFIG_SYS_MAIN_PWR_ON diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index fafc5f1adcb..1e5df3f7d7a 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -55,7 +55,6 @@ BOOTENV /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Physical Memory Map */ #define PHYS_SDRAM_1 CSD0_BASE_ADDR @@ -68,11 +67,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ /* Framebuffer and LCD */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 8b9f0a29017..0268a48c86f 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -88,7 +88,6 @@ "fi;\0" /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Physical Memory Map */ #define PHYS_SDRAM_1 CSD0_BASE_ADDR @@ -101,11 +100,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #ifdef CONFIG_CMD_SATA #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index 572261b0426..b26613a2ea8 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -86,10 +86,6 @@ "lcd:800x480-24@60,monitor=lcd\0" \ /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_MAXARGS 48 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ @@ -104,11 +100,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* FLASH and environment organization */ #define CONFIG_FSL_IIM diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 10e46c628d5..75bc27d1798 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -26,8 +26,6 @@ #include <asm/mach-imx/gpio.h> /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 32 /* MMC */ diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 832f73f05ef..76fbbf42daf 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -103,11 +103,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ #endif /* __MX6CUBOXI_CONFIG_H */ diff --git a/include/configs/mx6memcal.h b/include/configs/mx6memcal.h index 42d5e248ba1..ad53f17d671 100644 --- a/include/configs/mx6memcal.h +++ b/include/configs/mx6memcal.h @@ -25,8 +25,6 @@ #error please define serial console (CONFIG_SERIAL_CONSOLE_UARTx) #endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16) - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -34,11 +32,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #define CONFIG_MXC_USB_PORTSC PORT_PTS_UTMI #endif /* __CONFIG_H */ diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index d7408e06a06..bfcab1bed5b 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -143,11 +143,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ /* Framebuffer */ diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h index a212652fd7f..d120c7c7a35 100644 --- a/include/configs/mx6sabreauto.h +++ b/include/configs/mx6sabreauto.h @@ -28,13 +28,7 @@ /* Falcon Mode */ #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 - /* Falcon Mode - MMC support: args@1MB kernel@2MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) #endif #ifdef CONFIG_MTD_NOR_FLASH @@ -42,7 +36,6 @@ #define CONFIG_SYS_FLASH_SECT_SIZE (128 * 1024) #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ #define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #endif #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 5a854b9d194..2f4332a4b19 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -18,13 +18,8 @@ #include "mx6sabre_common.h" /* Falcon Mode */ -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 /* Falcon Mode - MMC support: args@1MB kernel@2MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 3da796d03a0..e03226d4180 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -90,11 +90,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ /* USB Configs */ diff --git a/include/configs/mx6sllevk.h b/include/configs/mx6sllevk.h index 1b32f58afca..e9ccb99d3ce 100644 --- a/include/configs/mx6sllevk.h +++ b/include/configs/mx6sllevk.h @@ -86,11 +86,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ /* MMC Configs */ diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index 372cf8dd711..272492466de 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -82,11 +82,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* MMC Configuration */ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 76e3dc8b382..fda5b03b60f 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -116,11 +116,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* MMC Configuration */ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 03d799ce654..44e6fd0156f 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -115,11 +115,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ /* USB Configs */ diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index bc494b46b69..db09db44d53 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -112,11 +112,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ #define CONFIG_IOMUX_LPSR diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index 9f7d60f8fbd..9f4dbec0700 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -23,8 +23,6 @@ #define CONFIG_IOMUX_LPSR /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 32 /* UART */ diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index aaad232f0e4..36cef252ea2 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -89,11 +89,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ /* diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h index f8a5009637d..c6c3695e5df 100644 --- a/include/configs/mx7ulp_com.h +++ b/include/configs/mx7ulp_com.h @@ -53,10 +53,5 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE SZ_256K -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* __CONFIG_H */ diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 7644274d84b..57fed4ed69c 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -23,9 +23,6 @@ #define LPUART_BASE LPUART4_RBASE /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 512 - -#define CONFIG_SYS_MAXARGS 256 /* Physical Memory Map */ @@ -100,9 +97,4 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE SZ_256K -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #endif /* __CONFIG_H */ diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 8dcc45c9e5d..fc15ed82c6e 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -43,11 +43,6 @@ /* Startup hooks */ -/* SPL */ -#ifndef CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" -#endif - /* Memory sizes */ /* OCRAM at 0x0 ; 32kB on MX23 ; 128kB on MX28 */ @@ -59,10 +54,6 @@ #endif /* Point initial SP in SRAM so SPL can use it too. */ -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* * We need to sacrifice first 4 bytes of RAM here to avoid triggering some @@ -78,10 +69,6 @@ */ /* U-Boot general configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ -#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* Boot argument buffer size */ /* * Drivers diff --git a/include/configs/mys_6ulx.h b/include/configs/mys_6ulx.h index 6801fc109ea..fb685ec9631 100644 --- a/include/configs/mys_6ulx.h +++ b/include/configs/mys_6ulx.h @@ -29,11 +29,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* NAND */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index afa4ca5b5af..3aa21a28d15 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -106,11 +106,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ /* diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index f273e243e55..97aafc5f725 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -153,7 +153,6 @@ * This rate is divided by a local divisor. */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ /* * Physical Memory Map @@ -167,8 +166,6 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Attached kernel image diff --git a/include/configs/novena.h b/include/configs/novena.h index dbde7a0ade5..327dde56970 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -34,11 +34,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* SPL */ #include "imx6_spl.h" /* common IMX6 SPL configuration */ diff --git a/include/configs/npi_imx6ull.h b/include/configs/npi_imx6ull.h index c250fa65060..1fc4b87cab7 100644 --- a/include/configs/npi_imx6ull.h +++ b/include/configs/npi_imx6ull.h @@ -30,11 +30,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* NAND */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 diff --git a/include/configs/nsim.h b/include/configs/nsim.h index de07b6b15f6..586ac3ebcaa 100644 --- a/include/configs/nsim.h +++ b/include/configs/nsim.h @@ -16,9 +16,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_SDRAM_SIZE SZ_256M -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - #define CONFIG_SYS_BOOTM_LEN SZ_32M /* diff --git a/include/configs/o4-imx6ull-nano.h b/include/configs/o4-imx6ull-nano.h index 7777935ba6e..00f7d871271 100644 --- a/include/configs/o4-imx6ull-nano.h +++ b/include/configs/o4-imx6ull-nano.h @@ -10,8 +10,6 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #if IS_ENABLED(CONFIG_CMD_USB) # define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/octeon_ebb7304.h b/include/configs/octeon_ebb7304.h index 8c6c57bd546..7035e631342 100644 --- a/include/configs/octeon_ebb7304.h +++ b/include/configs/octeon_ebb7304.h @@ -13,7 +13,6 @@ * CFI flash */ #define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT #define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ diff --git a/include/configs/octeontx2_common.h b/include/configs/octeontx2_common.h index 6ec2d3e2688..5c75f23a0bf 100644 --- a/include/configs/octeontx2_common.h +++ b/include/configs/octeontx2_common.h @@ -14,7 +14,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_TEXT_BASE /** Stack starting address */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xffff0) /** Extra environment settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -22,12 +21,6 @@ "ethrotate=yes\0" \ "autoload=0\0" -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /** Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MAXARGS 64 /** max command args */ - #define CONFIG_SYS_MMC_MAX_BLK_COUNT 8192 #if defined(CONFIG_MMC_OCTEONTX) diff --git a/include/configs/octeontx_common.h b/include/configs/octeontx_common.h index 81dbff2d672..22d38588780 100644 --- a/include/configs/octeontx_common.h +++ b/include/configs/octeontx_common.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_TEXT_BASE /** Stack starting address */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xffff0) /** Heap size for U-Boot */ @@ -53,12 +52,6 @@ # define CONFIG_SYS_64BIT_LBA #endif -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /** Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MAXARGS 64 /** max command args */ - #define CONFIG_SYS_MMC_MAX_BLK_COUNT 8192 /** EMMC specific defines */ diff --git a/include/configs/odroid.h b/include/configs/odroid.h index b8b47af4712..dec658dd13a 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -24,9 +24,6 @@ #include <linux/sizes.h> -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - - GENERATED_GBL_DATA_SIZE) - /* Partitions name */ #define PARTS_BOOT "boot" #define PARTS_ROOT "platform" diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index eb35d7b4ae2..8d24a03b722 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -16,8 +16,6 @@ #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) - /* USB */ #define CONFIG_USB_EHCI_EXYNOS diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 158773acedb..ab742798b92 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -28,9 +28,6 @@ #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_SYS_ENV_SECT_SIZE SZ_128K /* NAND: SPL falcon mode configs */ -#if defined(CONFIG_SPL_OS_BOOT) -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000 -#endif /* CONFIG_SPL_OS_BOOT */ #endif /* CONFIG_MTD_RAW_NAND */ /* Enable Multi Bus support for I2C */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index eeb9ef8c741..9c4e172d037 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -32,10 +32,6 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_SYS_ENV_SECT_SIZE SZ_128K -/* NAND: SPL falcon mode configs */ -#if defined(CONFIG_SPL_OS_BOOT) -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000 -#endif /* CONFIG_SPL_OS_BOOT */ #endif /* CONFIG_MTD_RAW_NAND */ #define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index d3839eb1229..12e502cd364 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -154,16 +154,8 @@ #endif #define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_SIZE 0x4000000 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -/* Defines for SPL */ - -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 0d69316862d..a344a46a3e6 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -28,9 +28,6 @@ #define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ -#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE -#define CONFIG_SPL_BSS_MAX_SIZE 0x1080000 - /* memtest start addr */ /* memtest will be run on 16MB */ @@ -139,8 +136,6 @@ /* * U-Boot general configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ /* * USB Configs @@ -174,17 +169,9 @@ /* SD/MMC */ /* defines for SPL */ -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_STACK 0x8001ff00 -#define CONFIG_SPL_MAX_FOOTPRINT 32768 -#define CONFIG_SPL_PAD_TO 32768 /* additions for new relocation code, must added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0xc0000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ - GENERATED_GBL_DATA_SIZE) #include <asm/arch/hardware.h> diff --git a/include/configs/openpiton-riscv64.h b/include/configs/openpiton-riscv64.h index 75b48f880af..12bd8fb99cd 100644 --- a/include/configs/openpiton-riscv64.h +++ b/include/configs/openpiton-riscv64.h @@ -15,23 +15,8 @@ /* Environment options */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32M) #define CONFIG_SYS_BOOTM_LEN SZ_256M -#ifdef CONFIG_SPL -#define CONFIG_SPL_MAX_SIZE 0x00100000 -#define CONFIG_SPL_BSS_START_ADDR 0x82000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x0100000 -#define CONFIG_SPL_STACK (0x80000000 + 0x04000000 - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "boot/fw_payload.bin" -#define CONFIG_SPL_GD_ADDR 0x85000000 -#endif - /* --------------------------------------------------------------------- * Board boot configuration */ diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index 1f2887105ff..8624d24b6ea 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -21,10 +21,6 @@ #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* USB */ #ifdef CONFIG_USB_EHCI_MX6 diff --git a/include/configs/origen.h b/include/configs/origen.h index c4f5997c3de..4d296b7a03f 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -48,8 +48,4 @@ #define RESERVE_BLOCK_SIZE (512) #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ -#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) - -#define CONFIG_SYS_INIT_SP_ADDR 0x02040000 - #endif /* __CONFIG_H */ diff --git a/include/configs/owl-common.h b/include/configs/owl-common.h index fabbb01e0c8..b0233b96b06 100644 --- a/include/configs/owl-common.h +++ b/include/configs/owl-common.h @@ -20,11 +20,7 @@ * image to the top of SDRAM. After relocation u-boot moves the stack to the * proper place. */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x7ff00) /* Console configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */ -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #endif diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index f6ecf2a7a8b..f74ad628fee 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -77,47 +77,24 @@ #endif #ifdef CONFIG_SDCARD -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SPL_MAX_SIZE (128 * 1024) #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_COMMON_INIT_DDR -#endif #elif defined(CONFIG_SPIFLASH) -#define CONFIG_SPL_SPI_FLASH_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SPL_MAX_SIZE (128 * 1024) #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) #define CONFIG_SYS_MPC85XX_NO_RESETVEC -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_COMMON_INIT_DDR -#endif #elif defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_TPL_BUILD -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_NAND_INIT -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SPL_MAX_SIZE (128 << 10) #define CONFIG_SYS_MPC85XX_NO_RESETVEC #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) #elif defined(CONFIG_SPL_BUILD) -#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_MAX_SIZE 4096 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 @@ -126,10 +103,6 @@ #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif #endif /* not CONFIG_TPL_BUILD */ - -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_TPL_PAD_TO 0x20000 -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS @@ -152,12 +125,6 @@ #define CONFIG_SYS_CCSRBAR 0xffe00000 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -/* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k - SPL code*/ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif - /* DDR Setup */ #define CONFIG_SYS_DDR_RAW_TIMING #define CONFIG_SYS_SPD_BUS_NUM 1 @@ -310,9 +277,7 @@ /* Size of used area in RAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (768 * 1024) @@ -365,31 +330,15 @@ #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) -#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) -#if defined(CONFIG_TARGET_P2020RDB) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) -#else -#define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) -#endif #elif defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_TPL_BUILD #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) #else #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) -#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) #endif /* CONFIG_TPL_BUILD */ #endif #endif @@ -402,7 +351,7 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) +#if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL) #define CONFIG_NS16550_MIN_FUNCTIONS #endif diff --git a/include/configs/pcl063.h b/include/configs/pcl063.h index 31b7d07a24c..659f20e63ab 100644 --- a/include/configs/pcl063.h +++ b/include/configs/pcl063.h @@ -41,11 +41,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* NAND */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 diff --git a/include/configs/pcl063_ull.h b/include/configs/pcl063_ull.h index 068fc7db347..0d099fa14c2 100644 --- a/include/configs/pcl063_ull.h +++ b/include/configs/pcl063_ull.h @@ -43,11 +43,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* NAND */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 79b69dfe175..e360b166f55 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -126,11 +126,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ #endif diff --git a/include/configs/pcm058.h b/include/configs/pcm058.h index 4d4185b4668..e87b6409bab 100644 --- a/include/configs/pcm058.h +++ b/include/configs/pcm058.h @@ -24,11 +24,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ #define ENV_MMC \ "mmcdev=0\0" \ diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h index ba82aaf6537..ff4180a8331 100644 --- a/include/configs/peach-pi.h +++ b/include/configs/peach-pi.h @@ -21,7 +21,6 @@ #include <configs/exynos5-common.h> #define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800) /* Display */ #ifdef CONFIG_LCD diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 16fb2f3a0e3..2c749ac2143 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -21,7 +21,6 @@ #include <configs/exynos5-common.h> #define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800) /* DRAM Memory Banks */ #define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ diff --git a/include/configs/phycore_am335x_r2.h b/include/configs/phycore_am335x_r2.h index af6f7e14dfd..7fa911620e1 100644 --- a/include/configs/phycore_am335x_r2.h +++ b/include/configs/phycore_am335x_r2.h @@ -97,10 +97,6 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 -/* NAND: SPL related configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#endif #endif /* !CONFIG_MTD_RAW_NAND */ /* CPU */ diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index 46fadd56106..1d01104cfe8 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -12,18 +12,11 @@ #include <asm/arch/imx-regs.h> #define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x920000 -#define CONFIG_SPL_BSS_START_ADDR 0x910000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K - /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ @@ -72,10 +65,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_512K -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -86,9 +75,4 @@ /* UART */ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE SZ_2K -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - #endif /* __PHYCORE_IMX8MM_H */ diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index eb92c423392..75ddcf465f9 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -12,18 +12,11 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONFIG_SPL_MAX_SIZE (152 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x960000 -#define CONFIG_SPL_BSS_START_ADDR 0x98FC00 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_1K -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K - #define CONFIG_SPL_ABORT_ON_RAW_IMAGE #define CONFIG_POWER_PCA9450 @@ -72,10 +65,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_512K -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -86,9 +75,4 @@ /* UART */ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE SZ_2K -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - #endif /* __PHYCORE_IMX8MP_H */ diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index ef3b0f73d62..0a07c9c29c1 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -23,12 +23,9 @@ #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 #define CONFIG_SYS_INIT_RAM_ADDR \ (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CONFIG_SYS_INIT_RAM_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1) /* SDRAM Configuration (for final code, data, stack, heap) */ #define CONFIG_SYS_SDRAM_BASE 0x88000000 -#define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10) #define CONFIG_SYS_MONITOR_LEN (192 << 10) @@ -41,7 +38,6 @@ /*------------------------------------------------------------ * Console Configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ /*-------------------------------------------------- * USB Configuration diff --git a/include/configs/pico-imx6.h b/include/configs/pico-imx6.h index c288908046a..df4dc4d496c 100644 --- a/include/configs/pico-imx6.h +++ b/include/configs/pico-imx6.h @@ -14,13 +14,8 @@ #ifdef CONFIG_SPL_OS_BOOT /* Falcon Mode */ -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 /* Falcon Mode - MMC support: args@1MB kernel@2MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) #endif #define CONFIG_MXC_UART_BASE UART1_BASE @@ -109,11 +104,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ /* Ethernet Configuration */ diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 1f111ea3064..ea30fbc4cfc 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -16,13 +16,8 @@ #ifdef CONFIG_SPL_OS_BOOT /* Falcon Mode */ -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SYS_SPL_ARGS_ADDR 0x88000000 /* Falcon Mode - MMC support: args@1MB kernel@2MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) #endif /* Network support */ @@ -109,11 +104,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ #ifdef CONFIG_DM_VIDEO diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index 06fd78f9da6..5a6f2244201 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -14,13 +14,8 @@ #ifdef CONFIG_SPL_OS_BOOT /* Falcon Mode */ -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SYS_SPL_ARGS_ADDR 0x88000000 /* Falcon Mode - MMC support: args@1MB kernel@2MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) #endif #define CONFIG_MXC_UART_BASE UART5_IPS_BASE_ADDR @@ -110,11 +105,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* PMIC */ #define CONFIG_POWER_PFUZE3000 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 1dc7d352590..25ad936a06b 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -9,16 +9,10 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_STACK 0x187FF0 -#define CONFIG_SPL_BSS_START_ADDR 0x00180000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ #define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ @@ -74,10 +68,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -86,13 +76,6 @@ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 1db82793970..921f92bd012 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -179,7 +179,5 @@ "" #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \ - GENERATED_GBL_DATA_SIZE) #endif diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 143e9f542ac..c6b106c64cb 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -202,7 +202,5 @@ "" #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \ - GENERATED_GBL_DATA_SIZE) #endif diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index b858aaa1ccd..69f3d065878 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -23,9 +23,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x70000000 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) - /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -46,22 +43,11 @@ #endif /* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE 0x010000 -#define CONFIG_SPL_STACK 0x310000 #define CONFIG_SYS_MONITOR_LEN 0x80000 #ifdef CONFIG_SD_BOOT - -#define CONFIG_SPL_BSS_START_ADDR 0x70000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 -#define CONFIG_SYS_SPL_MALLOC_START 0x70080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 - -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - #elif CONFIG_NAND_BOOT -#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 #define CONFIG_SYS_NAND_ECCSIZE 256 diff --git a/include/configs/poleg.h b/include/configs/poleg.h index c21b063c059..f1c259f4760 100644 --- a/include/configs/poleg.h +++ b/include/configs/poleg.h @@ -11,12 +11,8 @@ #define CONFIG_SYS_PL310_BASE 0xF03FC000 /* L2 - Cache Regs Base (4k Space)*/ #endif -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_BOOTMAPSZ (0x30 << 20) #define CONFIG_SYS_SDRAM_BASE 0x0 -#define CONFIG_SYS_INIT_SP_ADDR (0x00008000 - GENERATED_GBL_DATA_SIZE) /* Default environemnt variables */ #define CONFIG_SERVERIP 192.168.0.1 diff --git a/include/configs/pomelo.h b/include/configs/pomelo.h index cdd6cdb58dd..11d408f1908 100644 --- a/include/configs/pomelo.h +++ b/include/configs/pomelo.h @@ -12,7 +12,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* SIZE of malloc pool */ -#define CONFIG_SYS_INIT_SP_ADDR (0x29800000 + 0x1a000) /*BOOT*/ #define CONFIG_SYS_BOOTM_LEN 0x3c00000 diff --git a/include/configs/poplar.h b/include/configs/poplar.h index 222a14bc8f8..6def3691103 100644 --- a/include/configs/poplar.h +++ b/include/configs/poplar.h @@ -17,7 +17,6 @@ /* SYS */ #define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONFIG_SYS_INIT_SP_ADDR 0x200000 /* ATF bl33.bin load address (must match) */ @@ -49,8 +48,4 @@ "ramdisk_addr_r=0x32400000\0" \ BOOTENV -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 64 - #endif /* _POPLAR_H_ */ diff --git a/include/configs/porter.h b/include/configs/porter.h index bf380ddf05b..88fa65e0ffc 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -12,10 +12,9 @@ #include "rcar-gen2-common.h" -#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 #define STACK_AREA_SIZE 0x00100000 #define LOW_LEVEL_MERAM_STACK \ - (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + (SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) /* MEMORY */ #define RCAR_GEN2_SDRAM_BASE 0x40000000 @@ -39,7 +38,5 @@ "bootm_size=0x10000000\0" /* SPL support */ -#define CONFIG_SPL_STACK 0xe6340000 -#define CONFIG_SPL_MAX_SIZE 0x4000 #endif /* __PORTER_H */ diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h index 1d526a73802..48c0584d5b3 100644 --- a/include/configs/presidio_asic.h +++ b/include/configs/presidio_asic.h @@ -8,7 +8,6 @@ #ifndef __PRESIDIO_ASIC_H #define __PRESIDIO_ASIC_H -#define CONFIG_SYS_INIT_SP_ADDR 0x00100000 #define CONFIG_SYS_BOOTM_LEN 0x00c00000 /* Generic Timer Definitions */ @@ -42,10 +41,6 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define KSEG1_ATU_XLAT(x) (x) @@ -61,7 +56,6 @@ #define GLOBAL_IO_DRIVE_CONTROL_OFFSET 0x4c /* max command args */ -#define CONFIG_SYS_MAXARGS 64 #define CONFIG_EXTRA_ENV_SETTINGS "silent=y\0" /* nand driver parameters */ diff --git a/include/configs/px30_common.h b/include/configs/px30_common.h index a7f5e911655..96dcfb420f7 100644 --- a/include/configs/px30_common.h +++ b/include/configs/px30_common.h @@ -8,18 +8,11 @@ #include "rockchip-common.h" -#define CONFIG_SYS_CBSIZE 1024 - #define CONFIG_SYS_NS16550_MEM32 /* FIXME: ff020000 is pmu_mem (10k), while ff0e0000 is regular int_mem */ #define CONFIG_IRAM_BASE 0xff020000 -#define CONFIG_SYS_INIT_SP_ADDR 0x00400000 -#define CONFIG_SPL_STACK 0x00400000 -#define CONFIG_SPL_MAX_SIZE 0x20000 -#define CONFIG_SPL_BSS_START_ADDR 0x4000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x4000 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ #define GICD_BASE 0xff131000 diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h index 550e26f3f18..14cae43db3a 100644 --- a/include/configs/qemu-arm.h +++ b/include/configs/qemu-arm.h @@ -12,9 +12,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x40000000 -/* The DTB generated by QEMU is placed at start of RAM, stay away from there */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) - #define CONFIG_SYS_BOOTM_LEN SZ_64M /* GUIDs for capsule updatable firmware images */ @@ -79,8 +76,6 @@ "ramdisk_addr_r=0x44000000\0" \ BOOTENV -#define CONFIG_SYS_CBSIZE 512 - #define CONFIG_SYS_MAX_FLASH_SECT 256 /* Sector: 256K, Bank: 64M */ #endif /* __CONFIG_H */ diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index 136a2dfa716..60a17dbcdcd 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -56,9 +56,7 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) diff --git a/include/configs/qemu-riscv.h b/include/configs/qemu-riscv.h index f462895fb5f..f3e16e55966 100644 --- a/include/configs/qemu-riscv.h +++ b/include/configs/qemu-riscv.h @@ -8,18 +8,7 @@ #include <linux/sizes.h> -#ifdef CONFIG_SPL - -#define CONFIG_SPL_MAX_SIZE 0x00100000 -#define CONFIG_SPL_BSS_START_ADDR 0x84000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 - -#endif - #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h index e9dbd54517f..ba843e35a40 100644 --- a/include/configs/qemu-x86.h +++ b/include/configs/qemu-x86.h @@ -34,6 +34,4 @@ * - AHCI controller is supported for QEMU '-M q35' target */ -#define CONFIG_SPL_BOARD_LOAD_IMAGE - #endif /* __CONFIG_H */ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 54674094e83..ae712629df3 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -9,8 +9,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x8C000000 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 -#define CONFIG_SYS_PBSIZE 256 - /* Address of u-boot image in Flash */ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index 9bc24434980..2e542116904 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -10,16 +10,11 @@ #include <asm/arch/rmobile.h> -#ifdef CONFIG_SPL -#define CONFIG_SPL_TARGET "spl/u-boot-spl.srec" -#endif - #ifndef CONFIG_PINCTRL_PFC #define CONFIG_SH_GPIO_PFC #endif /* console */ -#define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_BAUDRATE_TABLE { 38400, 115200 } #define CONFIG_SYS_SDRAM_BASE (RCAR_GEN2_SDRAM_BASE) diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index 64743382eda..e80e45dcbd7 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -11,12 +11,6 @@ #include <asm/arch/rmobile.h> -#ifdef CONFIG_SPL -#define CONFIG_SPL_TARGET "spl/u-boot-spl.scif" -#endif - -#define CONFIG_SYS_BOOTPARAMS_LEN SZ_128K - /* boot option */ /* Generic Interrupt Controller Definitions */ @@ -24,16 +18,12 @@ #define GICC_BASE 0xF1020000 /* console */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_MAXARGS 64 #define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400 } /* PHY needs a longer autoneg timeout */ #define PHY_ANEG_TIMEOUT 20000 /* MEMORY */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE #define DRAM_RSV_SIZE 0x08000000 #define CONFIG_SYS_SDRAM_BASE (0x40000000 + DRAM_RSV_SIZE) @@ -49,15 +39,4 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" -/* SPL support */ -#if defined(CONFIG_R8A7795) || defined(CONFIG_R8A7796) || defined(CONFIG_R8A77965) -#define CONFIG_SPL_BSS_START_ADDR 0xe633f000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 -#else -#define CONFIG_SPL_BSS_START_ADDR 0xe631f000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 -#endif -#define CONFIG_SPL_STACK 0xe6304000 -#define CONFIG_SPL_MAX_SIZE 0x7000 - #endif /* __RCAR_GEN3_COMMON_H */ diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index ab2b492d03f..2f3260e449c 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -8,13 +8,8 @@ #include <asm/arch-rockchip/hardware.h> #include "rockchip-common.h" -#define CONFIG_SYS_CBSIZE 1024 - #define CONFIG_SYS_HZ_CLOCK 24000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x60100000 -#define CONFIG_SPL_STACK 0x10081fff - #define CONFIG_ROCKCHIP_MAX_INIT_SIZE (4 << 10) #define CONFIG_ROCKCHIP_CHIP_TAG "RK30" diff --git a/include/configs/rk3066_common.h b/include/configs/rk3066_common.h index be7d644e1e5..41e0d18f88c 100644 --- a/include/configs/rk3066_common.h +++ b/include/configs/rk3066_common.h @@ -9,16 +9,8 @@ #include <asm/arch-rockchip/hardware.h> #include "rockchip-common.h" -#define CONFIG_SYS_CBSIZE 256 - -#define CONFIG_SYS_INIT_SP_ADDR 0x78000000 - #define CONFIG_IRAM_BASE 0x10080000 -#define CONFIG_SPL_MAX_SIZE 0x32000 - -#define CONFIG_SPL_STACK 0x1008FFFF - #define CONFIG_SYS_SDRAM_BASE 0x60000000 #define SDRAM_BANK_SIZE (1024UL << 20UL) #define SDRAM_MAX_SIZE CONFIG_NR_DRAM_BANKS * SDRAM_BANK_SIZE diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index 8f04e9de5a3..5c60d119f99 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -8,15 +8,10 @@ #include "rockchip-common.h" -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_CBSIZE 1024 - #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_IRAM_BASE 0x10080000 -#define CONFIG_SYS_INIT_SP_ADDR 0x60100000 - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ /* RAW SD card / eMMC locations. */ diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h index 7449e816b7d..c1d66845412 100644 --- a/include/configs/rk3188_common.h +++ b/include/configs/rk3188_common.h @@ -9,21 +9,11 @@ #include <asm/arch-rockchip/hardware.h> #include "rockchip-common.h" -#define CONFIG_SYS_CBSIZE 1024 - -#ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM -/* Bootrom will load u-boot binary to 0x60000000 once return from SPL */ -#endif -#define CONFIG_SYS_INIT_SP_ADDR 0x60100000 - #define CONFIG_ROCKCHIP_MAX_INIT_SIZE (0x8000 - 0x800) #define CONFIG_ROCKCHIP_CHIP_TAG "RK31" #define CONFIG_IRAM_BASE 0x10080000 /* spl size 32kb sram - 2kb bootrom */ -#define CONFIG_SPL_MAX_SIZE (0x8000 - 0x800) - -#define CONFIG_SPL_STACK 0x10087fff #define CONFIG_SYS_SDRAM_BASE 0x60000000 #define SDRAM_BANK_SIZE (2UL << 30) diff --git a/include/configs/rk322x_common.h b/include/configs/rk322x_common.h index 36191ee9c12..dd1a207aed3 100644 --- a/include/configs/rk322x_common.h +++ b/include/configs/rk322x_common.h @@ -8,14 +8,10 @@ #include <asm/arch-rockchip/hardware.h> #include "rockchip-common.h" -#define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ #define CONFIG_SYS_HZ_CLOCK 24000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x61100000 -#define CONFIG_SPL_MAX_SIZE 0x100000 - #define CONFIG_ROCKCHIP_MAX_INIT_SIZE (28 << 10) #define CONFIG_ROCKCHIP_CHIP_TAG "RK32" #define CONFIG_IRAM_BASE 0x10080000 diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 075623f342a..844c154217b 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -11,23 +11,12 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64MB */ -#define CONFIG_SYS_CBSIZE 1024 - #define CONFIG_SYS_HZ_CLOCK 24000000 -#ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM -/* Bootrom will load u-boot binary to 0x0 once return from SPL */ -#endif -#define CONFIG_SYS_INIT_SP_ADDR 0x00100000 -#define CONFIG_SPL_STACK 0xff718000 - #define CONFIG_IRAM_BASE 0xff700000 /* RAW SD card / eMMC locations. */ -/* FAT sd card locations. */ -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - #define CONFIG_SYS_SDRAM_BASE 0 #define SDRAM_BANK_SIZE (2UL << 30) #define SDRAM_MAX_SIZE 0xfe000000 diff --git a/include/configs/rk3308_common.h b/include/configs/rk3308_common.h index 44a3e7adf20..169cf2ac9c1 100644 --- a/include/configs/rk3308_common.h +++ b/include/configs/rk3308_common.h @@ -8,16 +8,9 @@ #include "rockchip-common.h" -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SPL_MAX_SIZE 0x20000 -#define CONFIG_SPL_BSS_START_ADDR 0x00400000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 - #define CONFIG_SYS_NS16550_MEM32 #define CONFIG_IRAM_BASE 0xfff80000 -#define CONFIG_SYS_INIT_SP_ADDR 0x00800000 -#define CONFIG_SPL_STACK 0x00400000 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h index 2b8d77c47ed..9cdc9004a91 100644 --- a/include/configs/rk3328_common.h +++ b/include/configs/rk3328_common.h @@ -10,14 +10,6 @@ #define CONFIG_IRAM_BASE 0xff090000 -#define CONFIG_SYS_CBSIZE 1024 - -#define CONFIG_SYS_INIT_SP_ADDR 0x00300000 -#define CONFIG_SPL_STACK 0x00400000 -#define CONFIG_SPL_MAX_SIZE 0x40000 -#define CONFIG_SPL_BSS_START_ADDR 0x2000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ /* FAT sd card locations. */ diff --git a/include/configs/rk3368_common.h b/include/configs/rk3368_common.h index 2f71ce72df8..ac881886824 100644 --- a/include/configs/rk3368_common.h +++ b/include/configs/rk3368_common.h @@ -13,17 +13,9 @@ #define CONFIG_SYS_SDRAM_BASE 0 #define SDRAM_MAX_SIZE 0xff000000 -#define CONFIG_SYS_CBSIZE 1024 #define CONFIG_IRAM_BASE 0xff8c0000 -#define CONFIG_SYS_INIT_SP_ADDR 0x00300000 - -#define CONFIG_SPL_MAX_SIZE 0x40000 -#define CONFIG_SPL_BSS_START_ADDR 0x400000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x20000 -#define CONFIG_SPL_STACK 0x00188000 - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index 8e137376661..3ca80c8c7c0 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -8,23 +8,11 @@ #include "rockchip-common.h" -#define CONFIG_SYS_CBSIZE 1024 - #define CONFIG_IRAM_BASE 0xff8c0000 -#define CONFIG_SYS_INIT_SP_ADDR 0x00300000 - #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT) -#define CONFIG_SPL_STACK 0x00400000 -#define CONFIG_SPL_MAX_SIZE 0x40000 -#define CONFIG_SPL_BSS_START_ADDR 0x00400000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 #else -#define CONFIG_SPL_STACK 0xff8effff -#define CONFIG_SPL_MAX_SIZE 0x30000 - 0x2000 /* BSS setup */ -#define CONFIG_SPL_BSS_START_ADDR 0xff8e0000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x10000 #endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ diff --git a/include/configs/rk3568_common.h b/include/configs/rk3568_common.h index e9947ea4923..f9c7c23cd9a 100644 --- a/include/configs/rk3568_common.h +++ b/include/configs/rk3568_common.h @@ -8,17 +8,8 @@ #include "rockchip-common.h" -#define CONFIG_SYS_CBSIZE 1024 - #define CONFIG_IRAM_BASE 0xfdcc0000 -#define CONFIG_SYS_INIT_SP_ADDR 0x00c00000 - -#define CONFIG_SPL_STACK 0x00400000 -#define CONFIG_SPL_MAX_SIZE 0x20000 -#define CONFIG_SPL_BSS_START_ADDR 0x4000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x4000 - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ #define CONFIG_SYS_SDRAM_BASE 0 diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h index 0c08776ae26..4c964cc3770 100644 --- a/include/configs/rockchip-common.h +++ b/include/configs/rockchip-common.h @@ -10,7 +10,6 @@ #define CONFIG_SYS_NS16550_MEM32 /* ((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512) */ -#define CONFIG_SPL_PAD_TO 8355840 #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 7a5f0851b53..27738ab1933 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -32,9 +32,6 @@ * the VC uses. */ #define CONFIG_SYS_SDRAM_SIZE SZ_128M -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_SDRAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) #ifdef CONFIG_ARM64 #define CONFIG_SYS_BOOTM_LEN SZ_64M @@ -60,7 +57,6 @@ #endif /* Console configuration */ -#define CONFIG_SYS_CBSIZE 1024 /* Environment */ diff --git a/include/configs/rv1108_common.h b/include/configs/rv1108_common.h index d0f70b04e75..f088f0e7a0c 100644 --- a/include/configs/rv1108_common.h +++ b/include/configs/rv1108_common.h @@ -10,15 +10,12 @@ #define CONFIG_IRAM_BASE 0x10080000 -#define CONFIG_SYS_CBSIZE 1024 - #define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000) /* TIMER1,initialized by ddr initialize code */ #define CONFIG_SYS_TIMER_BASE 0x10350020 #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) #define CONFIG_SYS_SDRAM_BASE 0x60000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x100000) /* rockchip ohci host driver */ #define CONFIG_USB_OHCI_NEW diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h index 882d19afbf6..43593572d96 100644 --- a/include/configs/s5p4418_nanopi2.h +++ b/include/configs/s5p4418_nanopi2.h @@ -18,7 +18,6 @@ /*----------------------------------------------------------------------- * System memory Configuration */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MEM_SIZE 0x40000000 #define CONFIG_SYS_SDRAM_BASE 0x71000000 @@ -77,16 +76,6 @@ */ /* board_init_f->init_sequence, call arch_cpu_init */ -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 1024 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /*----------------------------------------------------------------------- * serial console configuration */ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 3b4347dd00b..d27116ad113 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -121,8 +121,6 @@ "opts=always_resume=1\0" \ "dfu_alt_info=" CONFIG_DFU_ALT "\0" -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ - /* Goni has 3 banks of DRAM, but swap the bank */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */ #define PHYS_SDRAM_1_SIZE (80 << 20) /* 80 MB in Bank #0 */ @@ -140,8 +138,6 @@ #define CONFIG_SAMSUNG_ONENAND 1 #define CONFIG_SYS_ONENAND_BASE 0xB0000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) - #define CONFIG_USB_GADGET_DWC2_OTG_PHY #endif /* __CONFIG_H */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index ae56c66e15c..8df7377a0f2 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -21,9 +21,6 @@ #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - - GENERATED_GBL_DATA_SIZE) - /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ #define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h index eb00e2b004b..4b0f20e89b7 100644 --- a/include/configs/salvator-x.h +++ b/include/configs/salvator-x.h @@ -16,7 +16,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/sam9x60_curiosity.h b/include/configs/sam9x60_curiosity.h index 2708711a4eb..afb1e3d0f10 100644 --- a/include/configs/sam9x60_curiosity.h +++ b/include/configs/sam9x60_curiosity.h @@ -20,12 +20,4 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x8000000 /* 128 MB */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x218000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \ - GENERATED_GBL_DATA_SIZE) -#endif - #endif diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h index c965fcb4e8f..b9b56d9f1a0 100644 --- a/include/configs/sam9x60ek.h +++ b/include/configs/sam9x60ek.h @@ -26,10 +26,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 megs */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \ - GENERATED_GBL_DATA_SIZE) - /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h index b9144584e3e..0eecb561508 100644 --- a/include/configs/sama5d27_som1_ek.h +++ b/include/configs/sama5d27_som1_ek.h @@ -14,24 +14,8 @@ #undef CONFIG_SYS_AT91_MAIN_CLOCK #define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x218000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (0x22000000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) -#endif - /* SPL */ -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN (512 << 10) -#ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif - #endif diff --git a/include/configs/sama5d27_wlsom1_ek.h b/include/configs/sama5d27_wlsom1_ek.h index e611e7b5104..178a6ad4eed 100644 --- a/include/configs/sama5d27_wlsom1_ek.h +++ b/include/configs/sama5d27_wlsom1_ek.h @@ -19,24 +19,8 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x10000000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x218000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) -#endif - /* SPL */ -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN (512 << 10) -#ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif - #endif diff --git a/include/configs/sama5d2_icp.h b/include/configs/sama5d2_icp.h index c3a5c2ae323..b18377be66b 100644 --- a/include/configs/sama5d2_icp.h +++ b/include/configs/sama5d2_icp.h @@ -18,13 +18,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x218000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) -#endif - #ifdef CONFIG_SD_BOOT /* u-boot env in sd/mmc card */ #define FAT_ENV_INTERFACE "mmc" @@ -34,16 +27,7 @@ #endif /* SPL */ -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN (512 << 10) -#ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif - #endif diff --git a/include/configs/sama5d2_ptc_ek.h b/include/configs/sama5d2_ptc_ek.h index 1ffe35bd875..3b91e83683a 100644 --- a/include/configs/sama5d2_ptc_ek.h +++ b/include/configs/sama5d2_ptc_ek.h @@ -19,9 +19,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) - /* NAND Flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index cab6ae50698..bbd72979b56 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -11,24 +11,8 @@ #include "at91-sama5_common.h" -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x218000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (0x22000000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) -#endif - /* SPL */ -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN (512 << 10) -#ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif - #endif diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 68bbe8f29c8..a10057452fe 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -27,13 +27,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x10000000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x318000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) -#endif - /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -56,30 +49,11 @@ #endif /* SPL */ -#define CONFIG_SPL_MAX_SIZE 0x18000 -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* size of u-boot.bin to load */ #define CONFIG_SYS_MONITOR_LEN (2 * SZ_512K) -#ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif - /* Falcon boot support on raw MMC */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x100 /* 128 KiB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) /* U-Boot proper stored by default at 0x200 (256 KiB) */ -#define CONFIG_SYS_SPL_ARGS_ADDR 0x22000000 - -/* Falcon boot support on FAT on MMC */ -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" - -/* Falcon boot support on raw NAND */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x1a0000 #endif diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 3be2c83fce0..f61b6e0dabc 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -38,13 +38,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x318000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) -#endif - /* SerialFlash */ /* NAND flash */ @@ -68,16 +61,7 @@ #endif /* SPL */ -#define CONFIG_SPL_MAX_SIZE 0x18000 -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN (512 << 10) -#ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif - #endif diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index e0e0bc6beb7..d5cd45ca5c3 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -15,13 +15,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x218000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) -#endif - /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -33,16 +26,7 @@ #endif /* SPL */ -#define CONFIG_SPL_MAX_SIZE 0x18000 -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN (512 << 10) -#ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif - #endif diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 2549d4c1a19..411ed29ab3c 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -15,13 +15,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x218000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) -#endif - /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -33,16 +26,7 @@ #endif /* SPL */ -#define CONFIG_SPL_MAX_SIZE 0x18000 -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SYS_MONITOR_LEN (512 << 10) -#ifdef CONFIG_SD_BOOT -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif - #endif diff --git a/include/configs/sama7g5ek.h b/include/configs/sama7g5ek.h index bca7166cb9b..78347373fca 100644 --- a/include/configs/sama7g5ek.h +++ b/include/configs/sama7g5ek.h @@ -16,12 +16,4 @@ #define CONFIG_SYS_SDRAM_BASE 0x60000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x218000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \ - GENERATED_GBL_DATA_SIZE) -#endif - #endif diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 7b6db46ee17..c22b74f707e 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -12,8 +12,6 @@ #define CONFIG_MALLOC_F_ADDR 0x0010000 -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - /* GUIDs for capsule updatable firmware images */ #define SANDBOX_UBOOT_IMAGE_GUID \ EFI_GUID(0x09d7cf52, 0x0720, 0x4710, 0x91, 0xd1, \ diff --git a/include/configs/sdm845.h b/include/configs/sdm845.h index 835f05d63e2..e1b8c61d076 100644 --- a/include/configs/sdm845.h +++ b/include/configs/sdm845.h @@ -24,8 +24,4 @@ /* Size of malloc() pool */ #define CONFIG_SYS_BOOTM_LEN SZ_64M -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 64 - #endif diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 08c4d52d658..5dc09fa91cc 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -27,14 +27,7 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 32 - /* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 1024 - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* * memtest works on 8 MB in DRAM after skipping 32MB from @@ -45,11 +38,8 @@ #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_SERIAL @@ -61,13 +51,6 @@ /* I2C Configuration */ /* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) - -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ @@ -92,8 +75,6 @@ * header. That is 0x800FFFC0--0x80100000 should not be used for any * other needs. */ -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* * Since SPL did pll and ddr initialization for us, diff --git a/include/configs/sifive-unleashed.h b/include/configs/sifive-unleashed.h index 96e2eb67988..4442fc29e31 100644 --- a/include/configs/sifive-unleashed.h +++ b/include/configs/sifive-unleashed.h @@ -11,22 +11,7 @@ #include <linux/sizes.h> -#ifdef CONFIG_SPL - -#define CONFIG_SPL_MAX_SIZE 0x00100000 -#define CONFIG_SPL_BSS_START_ADDR 0x85000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 - -#define CONFIG_SPL_STACK (0x08000000 + 0x001D0000 - \ - GENERATED_GBL_DATA_SIZE) - -#endif - #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h index fa734a66be7..f5a341c8449 100644 --- a/include/configs/sifive-unmatched.h +++ b/include/configs/sifive-unmatched.h @@ -11,22 +11,7 @@ #include <linux/sizes.h> -#ifdef CONFIG_SPL - -#define CONFIG_SPL_MAX_SIZE 0x00100000 -#define CONFIG_SPL_BSS_START_ADDR 0x85000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 - -#define CONFIG_SPL_STACK (0x08000000 + 0x001D0000 - \ - GENERATED_GBL_DATA_SIZE) - -#endif - #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/silk.h b/include/configs/silk.h index 574ba228d8a..58613effaf4 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -12,10 +12,9 @@ #include "rcar-gen2-common.h" -#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 #define STACK_AREA_SIZE 0x00100000 #define LOW_LEVEL_MERAM_STACK \ - (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + (SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) /* MEMORY */ #define RCAR_GEN2_SDRAM_BASE 0x40000000 @@ -39,7 +38,5 @@ "bootm_size=0x10000000\0" /* SPL support */ -#define CONFIG_SPL_STACK 0xe6340000 -#define CONFIG_SPL_MAX_SIZE 0x4000 #endif /* __SILK_H */ diff --git a/include/configs/sipeed-maix.h b/include/configs/sipeed-maix.h index 1cc2992c804..7159fc35d52 100644 --- a/include/configs/sipeed-maix.h +++ b/include/configs/sipeed-maix.h @@ -8,9 +8,6 @@ #include <linux/sizes.h> -/* Start just below the second bank so we don't clobber it during reloc */ -#define CONFIG_SYS_INIT_SP_ADDR 0x803FFFFF - #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_SDRAM_SIZE SZ_8M diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index e4e15f92d1b..cde6abc6261 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -41,9 +41,6 @@ /* misc settings */ -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 32 - /* setting board specific options */ #define CONFIG_SYS_AUTOLOAD "yes" @@ -91,7 +88,6 @@ #endif /* General Boot Parameter */ -#define CONFIG_SYS_CBSIZE 512 /* * The NAND Flash partitions: @@ -108,30 +104,17 @@ \ "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x301000 -#else /* * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, * leaving the correct space for initial global data structure above that * address while providing maximum stack area below. */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) -#endif +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 /* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE (SZ_4K) - -#define CONFIG_SPL_BSS_START_ADDR CONFIG_SYS_SDRAM_BASE -#define CONFIG_SPL_BSS_MAX_SIZE (SZ_16K) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) -#define CONFIG_SPL_NAND_RAW_ONLY -#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE @@ -150,7 +133,4 @@ #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) #define CONFIG_SYS_AT91_PLLB 0x10483f0e -#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS -#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO - #endif /* __CONFIG_H */ diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index f26995d5c1c..f8d2fafd278 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -18,7 +18,6 @@ #define CONFIG_SMDK5420 /* which is in a SMDK5420 */ #define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800) /* USB */ #define CONFIG_USB_XHCI_EXYNOS diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 8eea45450b5..2f04b077ad3 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -87,7 +87,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ @@ -117,8 +116,6 @@ #define CONFIG_SAMSUNG_ONENAND 1 #define CONFIG_SYS_ONENAND_BASE 0xE7100000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) - /* * Ethernet Contoller driver */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 9ff05fcca78..1367b7d0600 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -44,10 +44,6 @@ #define RESERVE_BLOCK_SIZE (512) #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ -#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) - -#define CONFIG_SYS_INIT_SP_ADDR 0x02040000 - /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET #define CONFIG_ENV_SROM_BANK 1 diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h index a7f77566042..681c831747b 100644 --- a/include/configs/smegw01.h +++ b/include/configs/smegw01.h @@ -42,9 +42,4 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #endif diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index f7ee9dbac35..6ff21b92168 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -23,8 +23,8 @@ /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* 64MB */ -#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 /* Mem test settings */ diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index 0e3567f535b..59bba7d143e 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -23,8 +23,8 @@ /* SDRAM */ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 #define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) /* 64MB */ -#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM /* Mem test settings */ diff --git a/include/configs/sniper.h b/include/configs/sniper.h index ca3da9547cb..0187fca5f0d 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -16,7 +16,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PTV 2 #define V_NS16550_CLK 48000000 #define V_OSCK 26000000 @@ -34,8 +33,6 @@ */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) /* * I2C @@ -51,18 +48,6 @@ * SPL */ -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024) -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024) -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SYS_CBSIZE 512 - /* * Serial */ diff --git a/include/configs/socfpga_arria10_socdk.h b/include/configs/socfpga_arria10_socdk.h index c20d54a3c5b..f712928d3c8 100644 --- a/include/configs/socfpga_arria10_socdk.h +++ b/include/configs/socfpga_arria10_socdk.h @@ -32,7 +32,6 @@ */ /* SPL memory allocation configuration, this is for FAT implementation */ -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00015000 /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h index 88fd8ae44cc..3a77c71874d 100644 --- a/include/configs/socfpga_arria5_secu1.h +++ b/include/configs/socfpga_arria5_secu1.h @@ -9,7 +9,6 @@ #include <asm/arch/base_addr_ac5.h> #include <linux/stringify.h> -#define CONFIG_HUSH_INIT_VAR /* Eternal oscillator */ #define CONFIG_SYS_TIMER_RATE 40000000 diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 5ecd1e6399b..6453ab79527 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -14,18 +14,11 @@ #if defined(CONFIG_TARGET_SOCFPGA_GEN5) #define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 #define CONFIG_SYS_INIT_RAM_SIZE SOCFPGA_PHYS_OCRAM_SIZE -#define CONFIG_SPL_PAD_TO 0x10000 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10) #define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000 -#define CONFIG_SPL_PAD_TO 0x40000 /* SPL memory allocation configuration, this is for FAT implementation */ -#ifndef CONFIG_SYS_SPL_MALLOC_SIZE -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x10000 -#endif #define CONFIG_SYS_INIT_RAM_SIZE (SOCFPGA_PHYS_OCRAM_SIZE - \ CONFIG_SYS_SPL_MALLOC_SIZE) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE) #endif /* @@ -37,10 +30,6 @@ #if ((CONFIG_SYS_BOOTCOUNT_ADDR > CONFIG_SYS_INIT_RAM_ADDR) && \ (CONFIG_SYS_BOOTCOUNT_ADDR < (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_INIT_RAM_SIZE))) -#define CONFIG_SPL_STACK CONFIG_SYS_BOOTCOUNT_ADDR -#else -#define CONFIG_SPL_STACK \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) #endif /* @@ -48,22 +37,13 @@ * phase of U-Boot, too. This prevents overwriting SPL data if stack/heap usage * in U-Boot pre-reloc is higher than in SPL. */ -#if defined(CONFIG_SPL_STACK_R_ADDR) && CONFIG_SPL_STACK_R_ADDR -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_STACK_R_ADDR -#else -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_STACK -#endif #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* * U-Boot general configurations */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ /* Print buffer size */ -#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* Boot argument buffer size */ /* * Cache @@ -162,16 +142,6 @@ * 0xFFEz_zzzz ...... Malloc area (grows up to top) * 0xFFE3_FFFF ...... End of SRAM (top) */ -#ifndef CONFIG_SPL_TEXT_BASE -#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE -#endif - -/* SPL SDMMC boot support */ -#ifdef CONFIG_SPL_MMC -#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4) -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif -#endif /* SPL QSPI boot support */ diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 3447b8f17c2..b71f8bab156 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -20,11 +20,6 @@ /* * U-Boot console configurations */ -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Extend size of kernel image for uncompression */ #define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024) @@ -34,15 +29,6 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000 #define CONFIG_SYS_INIT_RAM_SIZE 0x40000 -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR \ - + CONFIG_SYS_INIT_RAM_SIZE \ - - SOC64_HANDOFF_SIZE) -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE \ - + 0x100000) -#endif -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_SP_ADDR) /* * U-Boot environment configurations @@ -157,21 +143,5 @@ unsigned int cm_get_l4_sys_free_clk_hz(void); * 0x8000_0000 ...... End of SDRAM_1 (assume 2GB) * */ -#define CONFIG_SPL_TARGET "spl/u-boot-spl-dtb.hex" -#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SPL_BSS_START_ADDR (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE \ - - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE (CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR \ - - CONFIG_SYS_SPL_MALLOC_SIZE) - -/* SPL SDMMC boot support */ -#ifdef CONFIG_SPL_LOAD_FIT -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb" -#else -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif #endif /* __CONFIG_SOCFPGA_SOC64_COMMON_H__ */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index daba8278c6a..3309779118a 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -103,8 +103,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384KiB for Mon */ diff --git a/include/configs/somlabs_visionsom_6ull.h b/include/configs/somlabs_visionsom_6ull.h index d4761296c75..98966cfeb91 100644 --- a/include/configs/somlabs_visionsom_6ull.h +++ b/include/configs/somlabs_visionsom_6ull.h @@ -62,11 +62,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ /* USB Configs */ diff --git a/include/configs/stemmy.h b/include/configs/stemmy.h index 96e759d99ca..4ad55afad86 100644 --- a/include/configs/stemmy.h +++ b/include/configs/stemmy.h @@ -13,7 +13,6 @@ * low-level initialization and rely on configuration provided by the Samsung * bootloader. New images are loaded at the same address for compatibility. */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_BOOTM_LEN SZ_64M /* FIXME: This should be loaded from device tree... */ diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h index 3e6feae1fa3..a425dad6921 100644 --- a/include/configs/stih410-b2260.h +++ b/include/configs/stih410-b2260.h @@ -42,14 +42,6 @@ /* Extra Commands */ -#define CONFIG_SYS_GBL_DATA_SIZE 1024 /* Global data structures */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \ - CONFIG_SYS_MALLOC_LEN - \ - CONFIG_SYS_GBL_DATA_SIZE) - -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - /* USB Configs */ #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index 21bab5aafd5..18c9e5bfb6e 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -9,8 +9,6 @@ #define CONFIG_SYS_FLASH_BASE 0x08000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x10010000 - /* * Configuration of the external SDRAM memory */ @@ -19,8 +17,6 @@ #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ -#define CONFIG_SYS_CBSIZE 1024 - #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \ "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \ diff --git a/include/configs/stm32f429-evaluation.h b/include/configs/stm32f429-evaluation.h index 4c421b9596f..6849477beaf 100644 --- a/include/configs/stm32f429-evaluation.h +++ b/include/configs/stm32f429-evaluation.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_FLASH_BASE 0x08000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x10010000 - /* * Configuration of the external SDRAM memory */ @@ -24,8 +22,6 @@ #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ -#define CONFIG_SYS_CBSIZE 1024 - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) diff --git a/include/configs/stm32f469-discovery.h b/include/configs/stm32f469-discovery.h index e91f8da280d..2d8b2d27c92 100644 --- a/include/configs/stm32f469-discovery.h +++ b/include/configs/stm32f469-discovery.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_FLASH_BASE 0x08000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x10010000 - /* * Configuration of the external SDRAM memory */ @@ -24,8 +22,6 @@ #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ -#define CONFIG_SYS_CBSIZE 1024 - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h index cc3d4b4449d..05ac900f3c3 100644 --- a/include/configs/stm32f746-disco.h +++ b/include/configs/stm32f746-disco.h @@ -13,7 +13,6 @@ #define CONFIG_SYS_BOOTMAPSZ SZ_4M + SZ_2M #define CONFIG_SYS_FLASH_BASE 0x08000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x20050000 /* * Configuration of the external SDRAM memory @@ -26,8 +25,6 @@ #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ -#define CONFIG_SYS_CBSIZE 1024 - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) @@ -41,21 +38,10 @@ "ramdisk_addr_r=0xC0438000\0" \ BOOTENV -/* For SPL */ -#ifdef CONFIG_SUPPORT_SPL -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_SPL_LEN 0x00008000 #define CONFIG_SYS_UBOOT_START 0x080083FD #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_SPL_LEN) -#define CONFIG_SPL_PAD_TO 0x8000 - -/* DT blob (fdt) address */ -#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \ - 0x1C0000) -#endif -/* For SPL ends */ + CONFIG_SPL_PAD_TO) /* For splashcreen */ diff --git a/include/configs/stm32h743-disco.h b/include/configs/stm32h743-disco.h index c43b0d82853..f959fcf26f3 100644 --- a/include/configs/stm32h743-disco.h +++ b/include/configs/stm32h743-disco.h @@ -14,12 +14,9 @@ #define CONFIG_SYS_BOOTMAPSZ SZ_16M #define CONFIG_SYS_FLASH_BASE 0x08000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x24040000 #define CONFIG_SYS_HZ_CLOCK 1000000 -#define CONFIG_SYS_MAXARGS 16 - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) diff --git a/include/configs/stm32h743-eval.h b/include/configs/stm32h743-eval.h index d838449452a..c8688e9ca7b 100644 --- a/include/configs/stm32h743-eval.h +++ b/include/configs/stm32h743-eval.h @@ -14,12 +14,9 @@ #define CONFIG_SYS_BOOTMAPSZ SZ_16M #define CONFIG_SYS_FLASH_BASE 0x08000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x24040000 #define CONFIG_SYS_HZ_CLOCK 1000000 -#define CONFIG_SYS_MAXARGS 16 - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) diff --git a/include/configs/stm32h750-art-pi.h b/include/configs/stm32h750-art-pi.h index db17939a8c8..f7fa8c51d8e 100644 --- a/include/configs/stm32h750-art-pi.h +++ b/include/configs/stm32h750-art-pi.h @@ -14,12 +14,9 @@ #define CONFIG_SYS_BOOTMAPSZ (SZ_16M + SZ_8M) #define CONFIG_SYS_FLASH_BASE 0x90000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x24040000 #define CONFIG_SYS_HZ_CLOCK 1000000 -#define CONFIG_SYS_MAXARGS 16 - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h index 6b40cdb0177..ec41a8172c7 100644 --- a/include/configs/stm32mp15_common.h +++ b/include/configs/stm32mp15_common.h @@ -14,12 +14,10 @@ * Configuration of the external SRAM memory used by U-Boot */ #define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE /* * Console I/O buffer size */ -#define CONFIG_SYS_CBSIZE SZ_1K /* * For booting Linux, use the first 256 MB of memory, since this is @@ -33,14 +31,9 @@ /* SPL support */ #ifdef CONFIG_SPL /* SPL use DDR */ -#define CONFIG_SYS_SPL_MALLOC_START 0xC0300000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x01D00000 /* Restrict SPL to fit within SYSRAM */ #define STM32_SYSRAM_END (STM32_SYSRAM_BASE + STM32_SYSRAM_SIZE) -#define CONFIG_SPL_MAX_FOOTPRINT (STM32_SYSRAM_END - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_STACK (STM32_SYSRAM_BASE + \ - STM32_SYSRAM_SIZE) #endif /* #ifdef CONFIG_SPL */ /*MMC SD*/ #define CONFIG_SYS_MMC_MAX_DEVICE 3 diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index bb95480eeb2..910d7ef107b 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -33,6 +33,4 @@ #include <configs/stm32mp15_common.h> -#define CONFIG_SPL_TARGET "u-boot.itb" - #endif diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index 72f07e1c1c2..2195feeb658 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -44,14 +44,6 @@ #define CONFIG_EXTRA_CLOCK #define CONFIG_PRAM 2048 /* 2048 KB */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MBAR 0xFC000000 @@ -62,9 +54,8 @@ /* End of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - \ +#define CONFIG_SYS_INIT_SP_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) - 32) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) /* @@ -81,7 +72,6 @@ #define CONFIG_SERIAL_BOOT #endif -#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) diff --git a/include/configs/stout.h b/include/configs/stout.h index bcc6fcd36b3..f49e88cb17c 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -13,10 +13,9 @@ #include "rcar-gen2-common.h" -#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 #define STACK_AREA_SIZE 0x00100000 #define LOW_LEVEL_MERAM_STACK \ - (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + (SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) /* MEMORY */ #define RCAR_GEN2_SDRAM_BASE 0x40000000 @@ -43,7 +42,5 @@ "bootm_size=0x10000000\0" /* SPL support */ -#define CONFIG_SPL_STACK 0xe6340000 -#define CONFIG_SPL_MAX_SIZE 0x4000 #endif /* __STOUT_H */ diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index 137672909be..c57b1ad8a06 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -14,16 +14,11 @@ #define PHYS_SDRAM_1_SIZE 0x00198000 /* user interface */ -#define CONFIG_SYS_CBSIZE 1024 /* MISC */ #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 #define CONFIG_SYS_INIT_RAM_ADDR 0x00190000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* U-Boot Load Address */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* GMAC related configs */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 068340aa964..5b543fd2db1 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -49,20 +49,15 @@ #ifdef CONFIG_MACH_SUN9I #define SDRAM_OFFSET(x) 0x2##x #define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 #elif defined(CONFIG_MACH_SUNIV) #define SDRAM_OFFSET(x) 0x8##x #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SPL_BSS_START_ADDR 0x81f80000 #else #define SDRAM_OFFSET(x) 0x4##x #define CONFIG_SYS_SDRAM_BASE 0x40000000 /* V3s do not have enough memory to place code at 0x4a000000 */ -#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 #endif -#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ - /* * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is * slightly bigger. Note that it is possible to map the first 32 KiB of the @@ -77,11 +72,6 @@ /* FIXME: this may be larger on some SoCs */ #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ @@ -102,8 +92,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ /* standalone support */ #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR @@ -117,7 +105,6 @@ * autoconf.mk. */ #if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000 -#define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ #ifdef CONFIG_ARM64 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ #define LOW_LEVEL_SRAM_STACK 0x00054000 @@ -126,24 +113,15 @@ #endif /* !CONFIG_ARM64 */ #elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000 #ifdef CONFIG_MACH_SUN50I_H616 -#define CONFIG_SPL_MAX_SIZE 0xbfa0 /* 48 KiB */ #define LOW_LEVEL_SRAM_STACK 0x58000 #else -#define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ /* end of SRAM A2 on H6 for now */ #define LOW_LEVEL_SRAM_STACK 0x00118000 #endif #else -#define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ #endif -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - -#ifndef CONFIG_MACH_SUN50I_H616 -#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ -#endif - /* Ethernet support */ #ifdef CONFIG_USB_EHCI_HCD diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h index 5686a5b9104..5b862f4f2ee 100644 --- a/include/configs/synquacer.h +++ b/include/configs/synquacer.h @@ -22,7 +22,6 @@ /* * Boot info */ -#define CONFIG_SYS_INIT_SP_ADDR (0xe0000000) /* stack of init proccess */ /* * Hardware drivers support @@ -40,10 +39,6 @@ #define CONFIG_SYS_FLASH_BASE (0x08000000) #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 128 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */ #define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \ diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 77d80bfc981..b9285e8caba 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -49,8 +49,8 @@ * leaving the correct space for initial global data structure above * that address while providing maximum stack area below. */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 /* NAND flash */ #ifdef CONFIG_CMD_NAND @@ -142,18 +142,8 @@ #endif /* #ifndef CONFIG_SPL_BUILD */ /* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE (31 * SZ_512) -#define CONFIG_SPL_STACK (ATMEL_BASE_SRAM1 + SZ_16K) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN - -#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) -#define CONFIG_SPL_NAND_RAW_ONLY -#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE @@ -172,7 +162,4 @@ #define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) #define CONFIG_SYS_AT91_PLLB 0x10193F05 -#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS -#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO - #endif diff --git a/include/configs/tb100.h b/include/configs/tb100.h index 09766fea27a..03aeb4f5d2e 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -16,9 +16,6 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_SDRAM_SIZE SZ_128M -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - #define CONFIG_SYS_BOOTM_LEN SZ_32M /* diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index b7a94812f35..1ebe28b7c1b 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -17,10 +17,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_BOOTMAPSZ 0x10000000 diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 99b7bd07aa0..159ba093f29 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -35,17 +35,6 @@ */ #define CONFIG_SYS_MMC_MAX_DEVICE 4 -/* - * Increasing the size of the IO buffer as default nfsargs size is more - * than 256 and so it is not possible to edit it - */ -#define CONFIG_SYS_CBSIZE (1024 * 2) /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 64 /* max number of command args */ - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - #ifdef CONFIG_ARM64 #define FDTFILE "nvidia/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" #else @@ -65,16 +54,8 @@ #ifndef CONFIG_ARM64 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#endif -#ifndef CONFIG_ARM64 /* Defines for SPL */ -#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_TEXT_BASE - \ - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 #endif #endif /* _TEGRA_COMMON_H_ */ diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index 09737211803..74208315894 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -54,8 +54,6 @@ "ramdisk_addr_r=0x83100000\0" /* Defines for SPL */ -#define CONFIG_SYS_SPL_MALLOC_START 0x80090000 -#define CONFIG_SPL_STACK 0x800ffffc /* For USB EHCI controller */ #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h index df688dabd1a..314486a1bcb 100644 --- a/include/configs/tegra124-common.h +++ b/include/configs/tegra124-common.h @@ -56,8 +56,6 @@ "ramdisk_addr_r=0x83100000\0" /* Defines for SPL */ -#define CONFIG_SYS_SPL_MALLOC_START 0x80090000 -#define CONFIG_SPL_STACK 0x800ffffc /* For USB EHCI controller */ #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index fac86927285..a2b14d8ead8 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -55,8 +55,6 @@ "ramdisk_addr_r=0x03100000\0" /* Defines for SPL */ -#define CONFIG_SYS_SPL_MALLOC_START 0x00090000 -#define CONFIG_SPL_STACK 0x000ffffc /* Align LCD to 1MB boundary */ #define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index b878b1a9e69..a68da5ddfc8 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -51,8 +51,6 @@ "ramdisk_addr_r=0x83100000\0" /* Defines for SPL */ -#define CONFIG_SYS_SPL_MALLOC_START 0x80090000 -#define CONFIG_SPL_STACK 0x800ffffc /* For USB EHCI controller */ #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h index fdf048b27b3..c81e89eed8b 100644 --- a/include/configs/theadorable.h +++ b/include/configs/theadorable.h @@ -73,17 +73,6 @@ /* SPL */ /* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE ((128 << 10) - (CONFIG_SPL_TEXT_BASE - 0x40000000)) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ #define CONFIG_SYS_SDRAM_SIZE SZ_2G diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h index 3537ba30e1f..cc3891fd6df 100644 --- a/include/configs/thunderx_88xx.h +++ b/include/configs/thunderx_88xx.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_LOWMEM_BASE MEM_BASE /* Link Definitions */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) /* SMP Spin Table Definitions */ #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) @@ -47,9 +46,6 @@ /* Do not preserve environment */ -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ #define PLL_REF_CLK 50000000 /* 50 MHz */ #define NS_PER_REF_CLK_TICK (1000000000/PLL_REF_CLK) diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 95434aa5169..97166e010f7 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -62,7 +62,6 @@ /* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 512 /** * Physical Memory Map @@ -71,14 +70,11 @@ #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1024MB */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) /** * Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x4802E000 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_SERIAL @@ -89,13 +85,6 @@ /* CPU */ /* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) - -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 @@ -105,8 +94,6 @@ * header. That is 0x800FFFC0--0x80800000 should not be used for any * other needs. */ -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* * Since SPL did pll and ddr initialization for us, diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index c2dfdebcd5b..fa5d91099e1 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -28,7 +28,6 @@ * Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x4802E000 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ /* * NS16550 Configuration @@ -65,7 +64,5 @@ /* SPL */ /* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) #endif diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index f8bd5558e56..5d5df6b1019 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -32,8 +32,6 @@ * supports X-MODEM loading via UART, and we leverage this and then use * Y-MODEM to load u-boot.img, when booted over UART. */ -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ - (128 << 20)) /* Enable the watchdog inside of SPL */ diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 7483bc821d3..2d1f0372ae3 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -66,14 +66,6 @@ */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#ifndef CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) -#endif - -/* Timer information. */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - /* If DM_I2C, enable non-DM I2C support */ /* @@ -88,14 +80,7 @@ /* As stated above, the following choices are optional. */ -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 64 - /* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 1024 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* * When we have SPI, NOR or NAND flash we expect to be making use of * mtdparts, both for ease of use in U-Boot and for passing information @@ -128,34 +113,11 @@ * of the BSS area. We suggest that the stack be placed at 32MiB after the * start of DRAM to allow room for all of the above (handled in Kconfig). */ -#ifndef CONFIG_SPL_BSS_START_ADDR -#define CONFIG_SPL_BSS_START_ADDR 0x80a00000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -#endif -#ifndef CONFIG_SYS_SPL_MALLOC_START -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_8M -#endif -#ifndef CONFIG_SPL_MAX_SIZE -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) -#endif - - -/* FAT sd card locations. */ -#ifndef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif #ifdef CONFIG_SPL_OS_BOOT /* FAT */ -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" /* RAW SD card / eMMC */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x1500 /* address 0x2A0000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x200 /* 256KiB */ #endif /* General parts of the framework, required. */ diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 57f013cbf84..7fd79953dc1 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -12,13 +12,10 @@ /* U-Boot Build Configuration */ /* SoC Configuration */ -#define CONFIG_SPL_TARGET "u-boot-spi.gph" /* Memory Configuration */ #define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 #define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_ISW_ENTRY_ADDR - \ - GENERATED_GBL_DATA_SIZE) #ifdef CONFIG_SYS_MALLOC_F_LEN #define SPL_MALLOC_F_SIZE CONFIG_SYS_MALLOC_F_LEN @@ -27,22 +24,10 @@ #endif /* SPL SPI Loader Configuration */ -#define CONFIG_SPL_PAD_TO 65536 -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8) -#define CONFIG_SPL_BSS_START_ADDR (CONFIG_ISW_ENTRY_ADDR + \ - CONFIG_SPL_MAX_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024) #define KEYSTONE_SPL_STACK_SIZE (8 * 1024) -#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \ - CONFIG_SYS_SPL_MALLOC_SIZE + \ - SPL_MALLOC_F_SIZE + \ - KEYSTONE_SPL_STACK_SIZE - 4) /* SRAM scratch space entries */ -#define SRAM_SCRATCH_SPACE_ADDR CONFIG_SPL_STACK + 0x8 +#define SRAM_SCRATCH_SPACE_ADDR 0xc0c23fc #define TI_SRAM_SCRATCH_BOARD_EEPROM_START (SRAM_SCRATCH_SPACE_ADDR) #define TI_SRAM_SCRATCH_BOARD_EEPROM_END (SRAM_SCRATCH_SPACE_ADDR + 0x200) diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 3d7cb175faa..725a5a62f52 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -55,8 +55,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* SPL */ -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ - (64 << 20)) #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_NAND_BASE 0x30000000 diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index b5ccfdcc6d4..5d8c45af2fa 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -113,8 +113,6 @@ * SPL is overlapped with public stack and breaking non HS devices to boot. * So moving TEXT_BASE down to non-HS limit. */ -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ - (128 << 20)) #ifdef CONFIG_SPL_BUILD /* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 714a1c55c7f..f7f17d0f502 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -305,7 +305,4 @@ */ #endif -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ - (128 << 20)) - #endif /* __CONFIG_TI_OMAP5_COMMON_H */ diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index f859656b396..83abaeddf12 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -16,11 +16,6 @@ /* Fixup settings */ -/* SPL settings */ -#undef CONFIG_SPL_MAX_FOOTPRINT -#define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - /* Setup proper boot sequences for Miami boards */ #if defined(CONFIG_USB_HOST) diff --git a/include/configs/total_compute.h b/include/configs/total_compute.h index 0324b1e1b21..41297b693cf 100644 --- a/include/configs/total_compute.h +++ b/include/configs/total_compute.h @@ -10,7 +10,6 @@ #define __TOTAL_COMPUTE_H /* Link Definitions */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #define CONFIG_SYS_BOOTM_LEN (64 << 20) @@ -46,16 +45,10 @@ * Else boot FIT image. */ -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - #define CONFIG_SYS_FLASH_BASE 0x0C000000 /* 256 x 256KiB sectors */ #define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT - #define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ #define FLASH_MAX_SECTOR_SIZE 0x00040000 diff --git a/include/configs/tplink_wdr4300.h b/include/configs/tplink_wdr4300.h index 21c351a816e..3866a433329 100644 --- a/include/configs/tplink_wdr4300.h +++ b/include/configs/tplink_wdr4300.h @@ -9,14 +9,10 @@ #define CONFIG_SYS_MHZ 280 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 - #define CONFIG_SYS_SDRAM_BASE 0xa0000000 #define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) /* * Serial Port @@ -27,10 +23,6 @@ * Command */ /* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ -#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* Boot argument buffer size */ /* USB, USB storage, USB ethernet */ #define CONFIG_EHCI_MMIO_BIG_ENDIAN diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index e0cd1ec2518..3290ec021fd 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -286,11 +286,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* * All the defines above are for the TQMa6 SoM * diff --git a/include/configs/trats.h b/include/configs/trats.h index 910fc150b18..db33560f0db 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -25,9 +25,6 @@ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - - GENERATED_GBL_DATA_SIZE) - /* Tizen - partitions definitions */ #define PARTS_CSA "csa-mmc" #define PARTS_BOOT "boot" @@ -130,7 +127,6 @@ "fdtaddr=40800000\0" \ /* Falcon mode definitions */ -#define CONFIG_SYS_SPL_ARGS_ADDR CONFIG_SYS_SDRAM_BASE + 0x100 /* GPT */ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 3e121bc6909..a4d598d0851 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -24,9 +24,6 @@ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - - GENERATED_GBL_DATA_SIZE) - /* Tizen - partitions definitions */ #define PARTS_CSA "csa-mmc" #define PARTS_BOOT "boot" diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h index 6640ee495d2..7fa30d04f3c 100644 --- a/include/configs/turris_mox.h +++ b/include/configs/turris_mox.h @@ -10,9 +10,6 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 32 #define CONFIG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 1800, 2400, 4800, \ 9600, 19200, 38400, 57600, 115200, \ 230400, 460800, 500000, 576000, \ diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h index 8119340b112..9013d9a6932 100644 --- a/include/configs/turris_omnia.h +++ b/include/configs/turris_omnia.h @@ -26,23 +26,6 @@ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" -/* Defines for SPL */ -#define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - (CONFIG_SPL_TEXT_BASE - 0x40000000)) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - -#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC -/* SPL related MMC defines */ -# ifdef CONFIG_SPL_BUILD -# define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ -# endif -#endif - /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/udoo.h b/include/configs/udoo.h index 4bddc0eca30..c8d1ed4da68 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -58,11 +58,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ #endif /* __CONFIG_H * */ diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h index 3a7cb050b10..e30b6cc82d8 100644 --- a/include/configs/udoo_neo.h +++ b/include/configs/udoo_neo.h @@ -63,11 +63,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* PMIC */ #define CONFIG_POWER_PFUZE3000 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index 14ea40bee3e..578873295fb 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -16,7 +16,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index f813f88cdd7..2bb9e59b946 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -41,10 +41,6 @@ #define CONFIG_SYS_MONITOR_LEN 0x00200000 /* 2MB */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - #if !defined(CONFIG_ARM64) /* Time clock 1MHz */ #define CONFIG_SYS_TIMER_RATE 1000000 @@ -177,19 +173,9 @@ #define CONFIG_SYS_BOOTMAPSZ 0x20000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) - /* only for SPL */ -#define CONFIG_SPL_STACK (0x00100000) /* subtract sizeof(struct image_header) */ #define CONFIG_SYS_UBOOT_BASE (0x130000 - 0x40) -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_MAX_FOOTPRINT 0x10000 -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 - -#define CONFIG_SPL_PAD_TO 0x20000 - #endif /* __CONFIG_UNIPHIER_H__ */ diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index 2b6078a1cc9..32e8f6be0d1 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -28,8 +28,8 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024) +#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 /* NAND flash */ #ifdef CONFIG_CMD_NAND diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index 0faa656bc63..2632d56cb1c 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -15,7 +15,6 @@ /* U-Boot environment */ /* U-Boot general configurations */ -#define CONFIG_SYS_CBSIZE 512 /* UART */ #define CONFIG_MXC_UART_BASE UART1_BASE @@ -66,9 +65,4 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #endif /* __CONFIG_H */ diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index cd950ad055e..8f464dd39f0 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -9,7 +9,6 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -17,12 +16,6 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x920000 -#define CONFIG_SPL_BSS_START_ADDR 0x910000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ - /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x930000 /* For RAW image gives a error info not panic */ @@ -68,10 +61,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_2M -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #if defined(CONFIG_ENV_IS_IN_MMC) /* Environment in eMMC, before config block at the end of 1st "boot sector" */ @@ -86,13 +75,6 @@ /* UART */ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(1) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE SZ_2K -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - /* ENET */ #define CONFIG_FEC_MXC_PHYADDR 7 diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index 470f64d5a74..906a20fd840 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -9,18 +9,12 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SPL_MAX_SIZE (152 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_STACK 0x960000 -#define CONFIG_SPL_BSS_START_ADDR 0x0098fc00 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_1K -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x184000 @@ -85,10 +79,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_512K -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */ @@ -102,11 +92,4 @@ /* UART */ #define CONFIG_MXC_UART_BASE UART_BASE_ADDR(3) -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE SZ_2K -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - #endif /* __VERDIN_IMX8MP_H */ diff --git a/include/configs/vexpress_aemv8.h b/include/configs/vexpress_aemv8.h index 0632b367cad..14b92c095a0 100644 --- a/include/configs/vexpress_aemv8.h +++ b/include/configs/vexpress_aemv8.h @@ -11,10 +11,8 @@ /* Link Definitions */ #ifdef CONFIG_TARGET_VEXPRESS64_JUNO -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #else /* ATF loads u-boot here for BASE_FVP model */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) #endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ @@ -263,10 +261,6 @@ EXTRA_ENV_NAMES \ BOOTENV -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - #ifdef CONFIG_TARGET_VEXPRESS64_JUNO #define CONFIG_SYS_FLASH_BASE 0x08000000 /* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */ @@ -280,8 +274,6 @@ /* Store environment at top of flash */ #endif -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT - #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 599caaca17d..ff7307f0904 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -139,10 +139,6 @@ /* additions for new relocation code */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET /* Basic environment settings */ #define BOOT_TARGET_DEVICES(func) \ @@ -197,7 +193,4 @@ #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE0, \ CONFIG_SYS_FLASH_BASE1 } -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ - #endif /* VEXPRESS_COMMON_H */ diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index ec9049e1b3d..6ad1ba9e021 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -130,11 +130,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - #ifdef CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_RANGE (512 * 1024) #endif diff --git a/include/configs/vinco.h b/include/configs/vinco.h index 74eccfa2e64..a1572967618 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -27,9 +27,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE 0x4000000 -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) - /* MMC */ #ifdef CONFIG_CMD_MMC diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index e7d4fd16cc7..a447ec8c344 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -31,11 +31,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* MMC Configuration */ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h index 7e3d589e3fd..6a7a0832c95 100644 --- a/include/configs/vocore2.h +++ b/include/configs/vocore2.h @@ -17,10 +17,6 @@ /* SPL */ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x80010000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x10000 -#define CONFIG_SPL_MAX_SIZE 0x10000 -#define CONFIG_SPL_PAD_TO 0 /* Dummy value */ #define CONFIG_SYS_UBOOT_BASE 0 @@ -33,11 +29,6 @@ /* RAM */ -/* Memory usage */ -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) -#define CONFIG_SYS_CBSIZE 512 - /* Environment settings */ #endif //__VOCORE2_CONFIG_H__ diff --git a/include/configs/vyasa-rk3288.h b/include/configs/vyasa-rk3288.h index a51b169c618..e8c1013a71a 100644 --- a/include/configs/vyasa-rk3288.h +++ b/include/configs/vyasa-rk3288.h @@ -22,13 +22,8 @@ #ifndef CONFIG_TPL_BUILD /* Falcon Mode */ -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SYS_SPL_ARGS_ADDR 0x0ffe5000 /* Falcon Mode - MMC support: args@16MB kernel@17MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8000 /* 16MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) #endif #endif diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index d44b4a0750f..d4224127146 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -103,11 +103,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment organization */ #endif /* __CONFIG_H * */ diff --git a/include/configs/warp.h b/include/configs/warp.h index 8bdda377088..74fa03b53d8 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -29,11 +29,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* VDD voltage 1.65 - 1.95 */ #define CONFIG_SYS_SD_VOLTAGE 0x00000080 diff --git a/include/configs/warp7.h b/include/configs/warp7.h index b3c9f14c8f4..c00ca4a1117 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -89,11 +89,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* environment organization */ #define CONFIG_SYS_FSL_USDHC_NUM 1 diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index 33245375979..8d1eee2fcac 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -19,16 +19,11 @@ #define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE #define CONFIG_SYS_SDRAM_SIZE SZ_128M -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_512K \ - - GENERATED_GBL_DATA_SIZE) - #define CONFIG_RTC_DS1374 /* * U-Boot General Configurations */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* * NAND chip timings for FIXME: which one? @@ -65,11 +60,9 @@ /* SPL will be executed at offset 0 */ /* SPL will use SRAM as stack */ -#define CONFIG_SPL_STACK 0x0000FFF8 /* Use the framework and generic lib */ /* SPL will use serial */ /* SPL will load U-Boot from NAND offset 0x40000 */ -#define CONFIG_SPL_PAD_TO 0x20000 /* U-Boot will be 0x40000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */ #define CONFIG_SYS_MONITOR_LEN 0x40000 /* actually, MAX size */ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE diff --git a/include/configs/x530.h b/include/configs/x530.h index 67ff01db904..d8fc3c13d06 100644 --- a/include/configs/x530.h +++ b/include/configs/x530.h @@ -64,20 +64,4 @@ #define CONFIG_UBI_PART user #define CONFIG_UBIFS_VOLUME user -/* SPL */ - -/* Defines for SPL */ -#define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - (CONFIG_SPL_TEXT_BASE - 0x40000000)) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - #endif /* _CONFIG_X530_H */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index a22f97042f7..48091b95ca7 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -40,7 +40,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 512 /*----------------------------------------------------------------------- * CPU Features diff --git a/include/configs/xea.h b/include/configs/xea.h index 01942eaf2ba..19ccf633c40 100644 --- a/include/configs/xea.h +++ b/include/configs/xea.h @@ -15,17 +15,11 @@ #include <linux/sizes.h> /* SPL */ -#define CONFIG_SPL_STACK 0x20000 - -#define CONFIG_SYS_SPL_ARGS_ADDR 0x44000000 #define CONFIG_SYS_SPI_KERNEL_OFFS SZ_1M #define CONFIG_SYS_SPI_ARGS_OFFS SZ_512K #define CONFIG_SYS_SPI_ARGS_SIZE SZ_32K -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (SZ_512K / 0x200) -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (SZ_32K / 0x200) - /* Memory configuration */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ #define PHYS_SDRAM_1_SIZE 0x10000000 /* Max 256 MB RAM */ diff --git a/include/configs/xenguest_arm64.h b/include/configs/xenguest_arm64.h index 408c7b5dd69..364dae0cd93 100644 --- a/include/configs/xenguest_arm64.h +++ b/include/configs/xenguest_arm64.h @@ -13,13 +13,6 @@ #undef CONFIG_SYS_SDRAM_BASE -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "loadimage=ext4load pvblock 0 0x90000000 /boot/Image;\0" \ diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index b78c2429489..55837e1c564 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -14,8 +14,6 @@ #define GICD_BASE 0xF9000000 #define GICR_BASE 0xF9080000 -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE - /* Serial setup */ #define CONFIG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } @@ -27,11 +25,7 @@ /* Miscellaneous configurable options */ -/* Monitor Command Prompt */ /* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_MAXARGS 64 #if defined(CONFIG_CMD_DFU) #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/xilinx_versal_mini.h b/include/configs/xilinx_versal_mini.h index a94ab1fd207..e1f95de3c34 100644 --- a/include/configs/xilinx_versal_mini.h +++ b/include/configs/xilinx_versal_mini.h @@ -17,7 +17,4 @@ /* Undef unneeded configs */ #undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_SYS_CBSIZE -#define CONFIG_SYS_CBSIZE 1024 - #endif /* __CONFIG_VERSAL_MINI_H */ diff --git a/include/configs/xilinx_versal_mini_qspi.h b/include/configs/xilinx_versal_mini_qspi.h index 8572b8b3d2d..e2f2df29354 100644 --- a/include/configs/xilinx_versal_mini_qspi.h +++ b/include/configs/xilinx_versal_mini_qspi.h @@ -12,7 +12,4 @@ #include <configs/xilinx_versal_mini.h> -#undef CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x20000) - #endif /* __CONFIG_VERSAL_MINI_QSPI_H */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index f25d796a1e7..bfd622bb028 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -14,8 +14,6 @@ #define GICD_BASE 0xF9010000 #define GICC_BASE 0xF9020000 -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE - /* Serial setup */ #define CONFIG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } @@ -51,11 +49,7 @@ # define PARTS_DEFAULT #endif -/* Monitor Command Prompt */ /* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_MAXARGS 64 /* Ethernet driver */ #if defined(CONFIG_ZYNQ_GEM) @@ -205,13 +199,6 @@ "dfu_bufsiz=0x1000\0" #endif -#define CONFIG_SPL_STACK 0xfffffffc -#define CONFIG_SPL_MAX_SIZE 0x40000 - -/* Just random location in OCM */ -#define CONFIG_SPL_BSS_START_ADDR 0x0 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - #if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) # define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000 # define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000 @@ -219,29 +206,14 @@ #endif /* u-boot is like dtb */ -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin" -#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000 /* ATF is my kernel image */ -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub" - -/* MMC support */ -# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */ -# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */ -# if defined(CONFIG_SPL_LOAD_FIT) -# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb" -# else -# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -# endif #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU) # define CONFIG_SPL_HASH # define CONFIG_ENV_MAX_ENTRIES 10 #endif -#define CONFIG_SYS_SPL_MALLOC_START 0x20000000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x1000000 - #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE # error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used" #endif diff --git a/include/configs/xilinx_zynqmp_mini.h b/include/configs/xilinx_zynqmp_mini.h index baef561c0b5..1c0ab25c644 100644 --- a/include/configs/xilinx_zynqmp_mini.h +++ b/include/configs/xilinx_zynqmp_mini.h @@ -16,9 +16,5 @@ /* Undef unneeded configs */ #undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_SYS_INIT_SP_ADDR - -#undef CONFIG_SYS_CBSIZE -#define CONFIG_SYS_CBSIZE 1024 #endif /* __CONFIG_ZYNQMP_MINI_H */ diff --git a/include/configs/xilinx_zynqmp_mini_emmc.h b/include/configs/xilinx_zynqmp_mini_emmc.h index 57c40d61020..f423ddd08ec 100644 --- a/include/configs/xilinx_zynqmp_mini_emmc.h +++ b/include/configs/xilinx_zynqmp_mini_emmc.h @@ -12,6 +12,4 @@ #include <configs/xilinx_zynqmp_mini.h> -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE - #endif /* __CONFIG_ZYNQMP_MINI_EMMC_H */ diff --git a/include/configs/xilinx_zynqmp_mini_nand.h b/include/configs/xilinx_zynqmp_mini_nand.h index 782e6961682..d2c0e91b32e 100644 --- a/include/configs/xilinx_zynqmp_mini_nand.h +++ b/include/configs/xilinx_zynqmp_mini_nand.h @@ -14,6 +14,5 @@ #define CONFIG_SYS_SDRAM_SIZE 0x1000000 #define CONFIG_SYS_SDRAM_BASE 0x0 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x40000) #endif /* __CONFIG_ZYNQMP_MINI_NAND_H */ diff --git a/include/configs/xilinx_zynqmp_mini_qspi.h b/include/configs/xilinx_zynqmp_mini_qspi.h index 3091bae0511..5bea1c9908c 100644 --- a/include/configs/xilinx_zynqmp_mini_qspi.h +++ b/include/configs/xilinx_zynqmp_mini_qspi.h @@ -12,6 +12,4 @@ #include <configs/xilinx_zynqmp_mini.h> -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x20000) - #endif /* __CONFIG_ZYNQMP_MINI_QSPI_H */ diff --git a/include/configs/xilinx_zynqmp_r5.h b/include/configs/xilinx_zynqmp_r5.h index 3ec99e062df..37750d3d15d 100644 --- a/include/configs/xilinx_zynqmp_r5.h +++ b/include/configs/xilinx_zynqmp_r5.h @@ -15,13 +15,8 @@ /* Boot configuration */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ - #define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) /* Extend size of kernel image for uncompression */ #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) diff --git a/include/configs/xpress.h b/include/configs/xpress.h index bd39b328a67..8e36d1c4c3e 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -28,11 +28,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - /* Environment is in stored in the eMMC boot partition */ /* USB Configs */ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 92e5b436a32..7392582b5e4 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -62,9 +62,6 @@ # define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256KB */ #endif -/* Linux boot param area in RAM (used only when booting linux) */ -#define CONFIG_SYS_BOOTPARAMS_LEN (64 << 10) - /* Memory test is destructive so default must not overlap vectors or U-Boot*/ /* Load address for stand-alone applications. @@ -98,10 +95,6 @@ /*==============================*/ /* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 1024 - /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /*==============================*/ /* U-Boot autoboot configuration */ /*==============================*/ @@ -177,7 +170,6 @@ /* Flash & Environment */ /*=====================*/ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #ifdef CONFIG_XTFPGA_LX60 # define CONFIG_SYS_FLASH_SIZE 0x0040000 /* 4MB */ # define CONFIG_SYS_FLASH_SECT_SZ 0x10000 /* block size 64KB */ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index bd88b59f242..6a045ec60ae 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -199,14 +199,8 @@ /* Miscellaneous configurable options */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_CBSIZE 2048 /* Console I/O Buffer Size */ - #define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) /* Extend size of kernel image for uncompression */ @@ -215,20 +209,9 @@ /* Boot FreeBSD/vxWorks from an ELF image */ #define CONFIG_SYS_MMC_MAX_DEVICE 1 -/* MMC support */ -#ifdef CONFIG_MMC_SDHCI_ZYNQ -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#endif - /* Address in RAM where the parameters must be copied by SPL. */ -#define CONFIG_SYS_SPL_ARGS_ADDR 0x10000000 - -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "system.dtb" -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" /* Not using MMC raw mode - just for compilation purpose */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* qspi mode is working fine */ #ifdef CONFIG_ZYNQ_QSPI @@ -241,21 +224,13 @@ /* SP location before relocation, must use scratch RAM */ /* 3 * 64kB blocks of OCM - one is on the top because of bootrom */ -#define CONFIG_SPL_MAX_SIZE 0x30000 /* On the top of OCM space */ -#define CONFIG_SYS_SPL_MALLOC_START CONFIG_SPL_STACK_R_ADDR -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x2000000 /* * SPL stack position - and stack goes down * 0xfffffe00 is used for putting wfi loop. * Set it up as limit for now. */ -#define CONFIG_SPL_STACK 0xfffffe00 - -/* BSS setup */ -#define CONFIG_SPL_BSS_START_ADDR 0x100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 #endif /* __CONFIG_ZYNQ_COMMON_H */ diff --git a/include/configs/zynq_cse.h b/include/configs/zynq_cse.h index 7eafdfd9a65..cb982c2e74f 100644 --- a/include/configs/zynq_cse.h +++ b/include/configs/zynq_cse.h @@ -14,17 +14,9 @@ /* Undef unneeded configs */ #undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_CBSIZE 1024 - #undef CONFIG_SYS_INIT_RAM_ADDR #undef CONFIG_SYS_INIT_RAM_SIZE #define CONFIG_SYS_INIT_RAM_ADDR 0xFFFDE000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#undef CONFIG_SPL_BSS_START_ADDR -#undef CONFIG_SPL_BSS_MAX_SIZE -#define CONFIG_SPL_BSS_START_ADDR 0x20000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x8000 #endif /* __CONFIG_ZYNQ_CSE_H */ diff --git a/include/dm/platform_data/serial_pxa.h b/include/dm/platform_data/serial_pxa.h index 0d7dc4c462d..e1a02aed28e 100644 --- a/include/dm/platform_data/serial_pxa.h +++ b/include/dm/platform_data/serial_pxa.h @@ -16,13 +16,6 @@ #define BTUART_INDEX 0 #define FFUART_INDEX 1 #define STUART_INDEX 2 -#elif CONFIG_CPU_PXA25X -#define UART_CLK_BASE BIT(4) /* HWUART */ -#define UART_CLK_REG CKEN -#define HWUART_INDEX 0 -#define STUART_INDEX 1 -#define FFUART_INDEX 2 -#define BTUART_INDEX 3 #else /* PXA27x */ #define UART_CLK_BASE CKEN5_STUART #define UART_CLK_REG CKEN @@ -32,14 +25,6 @@ #endif /* - * Only PXA250 has HWUART, to avoid poluting the code with more macros, - * artificially introduce this. - */ -#ifndef CONFIG_CPU_PXA25X -#define HWUART_INDEX 0xff -#endif - -/* * struct pxa_serial_plat - information about a PXA port * * @base: Uart port base register address diff --git a/include/lcd.h b/include/lcd.h index 51a79317bba..7570e7ac609 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -40,8 +40,7 @@ ulong lcd_setmem(ulong addr); */ void lcd_set_flush_dcache(int flush); -#if defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \ - defined CONFIG_CPU_MONAHANS +#if defined(CONFIG_CPU_PXA27X) || defined CONFIG_CPU_MONAHANS #include <pxa_lcd.h> #elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD) #include <atmel_lcd.h> diff --git a/include/mpc85xx.h b/include/mpc85xx.h index 2c69a60de63..053b68a10a4 100644 --- a/include/mpc85xx.h +++ b/include/mpc85xx.h @@ -26,7 +26,7 @@ * Define default values for some CCSR macros to make header files cleaner* * * To completely disable CCSR relocation in a board header file, define - * CONFIG_SYS_CCSR_DO_NOT_RELOCATE. This will force CONFIG_SYS_CCSRBAR_PHYS + * CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE. This will force CONFIG_SYS_CCSRBAR_PHYS * to a value that is the same as CONFIG_SYS_CCSRBAR. */ @@ -35,7 +35,7 @@ CONFIG_SYS_CCSRBAR_PHYS_LOW and/or CONFIG_SYS_CCSRBAR_PHYS_HIGH instead." #endif -#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE +#if CONFIG_IS_ENABLED(SYS_CCSR_DO_NOT_RELOCATE) #undef CONFIG_SYS_CCSRBAR_PHYS_HIGH #undef CONFIG_SYS_CCSRBAR_PHYS_LOW #define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0 diff --git a/include/system-constants.h b/include/system-constants.h new file mode 100644 index 00000000000..83b41b384f3 --- /dev/null +++ b/include/system-constants.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __SYSTEM_CONSTANTS_H__ +#define __SYSTEM_CONSTANTS_H__ + +/* + * The most common case for our initial stack pointer address is to + * say that we have defined a static intiial ram address location and + * size and from that we subtract the generated global data size. + */ +#ifdef CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR +#define SYS_INIT_SP_ADDR CONFIG_CUSTOM_SYS_INIT_SP_ADDR +#else +#ifdef CONFIG_MIPS +#define SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET) +#else +#define SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#endif +#endif + +/* + * Typically, we have the SPL malloc pool at the end of the BSS area. + */ +#ifdef CONFIG_HAS_CUSTOM_SPL_MALLOC_START +#define SYS_SPL_MALLOC_START CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR +#else +#define SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) +#endif + +#endif diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index f047d4e0941..c1d32f58791 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -194,7 +194,7 @@ LDPPFLAGS += \ # Turn various CONFIG symbols into IMAGE symbols for easy reuse of # the scripts between SPL, TPL and VPL. -ifneq ($(CONFIG_$(SPL_TPL_)MAX_SIZE),) +ifneq ($(CONFIG_$(SPL_TPL_)MAX_SIZE),0x0) LDPPFLAGS += -DIMAGE_MAX_SIZE=$(CONFIG_$(SPL_TPL_)MAX_SIZE) endif ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),) |